* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
Product Description - 1/8" To 2" (BSP / NPT / Metrics) 1000 PSI to 20000PSI All Types Of Alloy Steel Grade -20 C to 350 C PRESSURE:- 1000 PSI to 20000PSI Product origin - MUMBAI Key Specifications/Special Features - Female x Female Connection, Female x Male Connection Male x Male Connection,OD Tube Connection (Metric) Minimum Order Size and Packaging details - 25 PIECE
Product Description - 1/8" To 2" (BSP / NPT / Metrics) 1000 PSI to 20000PSI All Types Of Alloy Steel Grade -20 C to 350 C PRESSURE:- 1000 PSI to 20000PSI Product origin - MUMBAI Key Specifications/Special Features - Female x Female Connection, Female x Male Connection Male x Male Connection,OD Tube Connection (Metric) Minimum Order Size and Packaging details - 26 PIECE
Control Valves are the most critical component when you have handle and control air, gas and liquids, in process, production, manufacturing industry,. The standard and specification varies from each case based on the pressure, viscosity material characteristic etc. We have a range of valves which is used in air, gas and and liquids, that serves across industry like petrochemical, pharma. chemical , food and beverages etc. from cast iron, alloy, MS, SS etc Industrial valves are of various types such as Gate Valves, Globe Valves, Ball Valves, Butterfly Valves, Check Valves, Pressure Valves, and Diaphragm Valves etc
1) GATE VALVE; Audco, L&T, ASA Class 150, Cast Carbon Steel to ASTM A216 Gr, WCB Gate Valve, with 13% Cr. S.S. Internals (S.S. 410) IBR Approved. Gear Operated 200 and above Sizes IN MM: 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600
Audco, L&T, ASA Class 300, Cast Carbon Steel to ASTM A216 Gr. WCB Gate Valve, with 13% Cr. S.S. Internals (S.S. 410) IBR Approved. Gear Operated 200mm and above Sizes in MM: 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600
Audco ASA Class 600, Globe Valve, Rising Stem Body & Bonnet of Forged Carbon Steel to ASTM A105, Body Seat Rings 13% Cr. S.S. Flanged Ends, Drilled to ANSI B16.5 Class 600 Size in MM: 15, 20, 25, 32, 40, 50 Gear Operated 200mm onwards
Audco L&T, ASA Class 150, Bolted Bonnet Globe Valve, Body & Bonnet of Carbon Steel to ASTM A216, Gr, WCB. Trim of 13% Gr, S.S. Ends Flanged and Drilled to ASA Class 150, IBR Approved. Gear Operated 200mm and above. Size in MM: 50, 65, 80, 100, 125, 150, 200, 250, 300, 350