Advantage * Suitable Solvent, ECO ink printing * 180g rigid high weight art paper, easy for lamination and field installation. * Soft vinyl (28Pa hardness) is suitable for arched glass surface. * Strong adhesion, anti-wind, anti UV. * Complete removable glue, no glue leaving behind the window after using Specification: Hole Ink diameter Open rate Film thickness with glue Liner Paper Width Solvent ECO UV 1.6mm 40% 150micron 180g art paper 1.27 / 1.37 /1.52m Yes Yes NO 2. Use area GK1001 film is intended for making graphics in the following area * Window of car or bus sign graphics * Building window for sign * Interior glass sign faces * Other transparent substrates such as transparent acrylic, polycarbonate 3. Limitation This type is not recommended for the following applications: * The surfaces of substrates are dirty, solvent cleaned, grease, silicon coating which affect the adhesion of the glue. Great K2 Industry Co., Ltd R & D Center - 2 - * The glass has built-in heating, defrosting elements or wipers * Restrict the safe operation of emergency window exits 4. Temperature ranges Minimum application temperature > 9XC Service temperature range - 25XC to + 75XC 5. Shelf life: 2 year in material's original packaging, storage temperature of 15-22 deg C, relative humidity of 50¡ã55%. 6. Durability: 1 year in outdoor solution. But it also depends on printing method and ink. Correct substrate preparation and maintenance of vinyl will enhance durability. 7. Technical data Composition High gloss vivid white/black vinyl Thickness with glue 150 Film micron Shrinkage after application ¡Õ1.1% Adhesive Type Clear Acrylic Solvent, pressure sensitive Removable ability Removable Adhesive Thickness 0.02¡Ó0.003 mm Adhesion 2.4 pounds/inch (Acrylic and uncoated, clear polycarbonate) 180 degree pull back testing. Type Rigid PE coating silicon art paper Weight 180g/m2 Release force 40g Liner SA rate >85% Salt water testing 100h/23XC no variation. 150um*(1.27,1.37,1.52)m*50m/roll.
Molybdenum disilicide (MoSi2) heating elements a resistance generate-heating component made from MoSi2 or the basic material. It is used in high temperature under the oxidizing atmosphere, it looks like glass in its surface and form a light SiO2 glass film which can protect the element not to be oxidized. So this kind of element has unique effect for resisting oxidization in the high temperature. It is used to the highest temperature up to 1800C during oxidizing atmosphere. According to your request, our company can produce the products of Pole, "U", "W" and "U"-right angle shapes, etc. MoSi2 heating element can usually make use of furnace temperature from 1300C to 1800C. It is extensively used in the industries of metallurgy, glass, ceramic refractory, crystal electronic device, industrial furnace manufacture, etc.. It is an essential ideal element when the products are sintering in the high temperature. MoSi2 Heating Element's installation: The brittleness of MoSi2 heating element is relative more under the usual temperature, it also has plasticity under the high temperature. So you had better hang and erect vertically the "U"-shape element. If you need to erect it horizontally, please choose a support of high-temperature insulating materials. The cone-part of the element must extend inside the furnace. At first the fixture of MoSi2 power connector cant be screwed too tightly. When temperature of the element is going up, please twist it tightly again, so the element is not easily broken. (Our suggestion: please choose the specialize power connector provided by our company) The furnace top must be a good function of heat-preservation. In general, the temperature of furnace top cant be over 300C. The voltage should be low 0.1 between the power connector and the element. In order to avoid radiating heat to pass the connector, the distance is not less than 50mm between the low end of connector and the upside of the ceramic brick. The Dia.6 element can't be used of 170A for a long time. The Dia.9 element can't be used of 300A for a long time. Specifications: The product includes series 1700 grade, 1800 grade. Packaging is available in U shape, W shape, Straight shape (X shape) and bend shape (L shape). The dimension ranges from 3/6, 4/9, 5/10, 6/10, 6/12, 6/14, 7/14, 8/16, 9/18 to 12/24mm. First step, packed with sponge and box case, and then put it into wooden case. Usually, 2-4 pieces of mosi2 heater are packaged in one box case.
BMF Sandwich panel production line Introduction ííííBMFííSandwich panel production line is main equipment that is used to produce sandwich panel í¬ a new building materials which has the features as stable, light, solidity and beautiful appearance. The application of sandwich panels in various usage of large-scale house like supermarket, workshop, warehouse is convenient and fast in building. They also can be offered to construct refrigerator, clearing room .etc feature H plate, tong & groove panel plate production available Corrugated panel with various joints option available EPS or rock wool & glass wool panel available Joint-hidden panel plate with various joint and plate type available Continuous automatic production available Nonstandard panel type as Customer requirement Flexible option for customer practical need PLC(programmable logic controller) combined with touch screen apply convenient and reliable operation Automatic length to cut and count available Complete accessory equipment available Specification External/fix dimensions:Length45000mm í- Width4500mm í- Height2700mm Operation Voltage: 380V Total power: about 32KW Weight: 25ton Production/Operation rate: 0-4.5m/min Material thickness: 0.3-0.8mm Core thickness: 20-300mm Core material: EPS, rock wool and glass wool Control system: Touch screen with PLC, Transducer Sandwich panel production line is main equipment that is used to produce sandwich panel í¬ a new building materials which has the features as stable, light, solidity and beautiful appearance. The application of sandwich panels in various usage of large-scale house like supermarket, workshop, warehouse is convenient and fast in building. They also can be offered to construct refrigerator, clearing room .etc feature H plate, tong & groove panel plate production available Corrugated panel with various joints option available EPS or rock wool & glass wool panel available Joint-hidden panel plate with various joint and plate type available Continuous automatic production available Nonstandard panel type as Customer requirement Flexible option for customer practical need PLC(programmable logic controller) combined with touch screen apply convenient and reliable operation Automatic length to cut and count available Complete accessory equipment available
Construction: pigment can be used to paint the wall, and it can also be used for colored cement, colored cement floor tiles, colored mortar, colored asphalt, terrazzo, Mosaic tiles, artificial marble, etc.; Plastic products: it can be used for coloring of thermosetting plastics, thermoplastics and rubber products; Paint coloring: it can be used for the coloring of waterborne interior and exterior wall coatings, powder coatings and other coatings; Protective substances: it can be used as toy paint, decorative paint, furniture paint, electrophoresis paint and enamel to protect the products; Used for fine grinding of advanced materials, polishing of precision hardware instruments and optical glasses; Used for smelting various magnetic alloys and other high-grade alloy steels. Our stable product quality and good service is the best. Our commitment: stable product quality, good business reputation and perfect after-sales service. Our goal is to build a strong global brand.
Garnet sand is mostly used for #sandblasting, #waterFiltration, #Waterjet Cutting & Abrasive papers. It is also used in the preparation of non-skid tracks, steps, sports Ground Surface. It is also used as abrasive media in Coated abrasives like Grinding Wheels and belts that are used in cleaning/polishing various surfaces like glass, ceramics, wood & metals. We are Manufacturing and supplying a Prime qualitative product at the best price. We are currently exporting our product in Europe, the United State of America, Canada, South Korea, UAE, Qatar, and various countries. We have #Garnetabrasive with below mesh size #20_40 #30_60 #12_24 and #60_80 #120 We are looking for a long term partnership with International traders, stockists & buyer companies. We can assure you prime quality products at very attractive price. #waterjetcutting #abrasives #garnet #sand #naturalabrasive #sandblasting #waterfiltration For more information
Garnet sand is mostly used for #sandblasting, #waterFiltration, #Waterjet Cutting & Abrasive papers. It is also used in the preparation of non-skid tracks, steps, sports Ground Surface. It is also used as abrasive media in Coated abrasives like Grinding Wheels and belts that are used in cleaning/polishing various surfaces like glass, ceramics, wood & metals. We are Manufacturing and supplying a Prime qualitative product at the best price. We are currently exporting our product in Europe, the United State of America, Canada, South Korea, UAE, Qatar, and various countries. We have #Garnetabrasive with below mesh size #20_40 #30_60 #12_24 and #60_80 #120 We are looking for a long term partnership with International traders, stockists & buyer companies. We can assure you prime quality products at very attractive price. #waterjetcutting #abrasives #garnet #sand #naturalabrasive #sandblasting #waterfiltration
Cast steel cable protector is made of carbon steel, stainless steel by Investment casting(lost wax casting, precision casting), water glass process, is widely applied to tubing hoop, safety valve protection, sub-sea completions, gauges completions and so on. The body of cable protector adopts investment casting technical and special toughness process. It's strength and reliability could be more distinct with all-cast grade material. Being unique design of smooth streamline, it prevents damage during dynamic motion of the production tubing and ensures continuity and accuracy in the gauges complication. Cable protector can be rapidly and reliably installed with no separate or loose parts or pins, prevents cross threading, and reduces the potential hang up risk. Meanwhile, it demounts easily and allows reinstallation.
Single Foam TapeIt is a medium density closed cell foam tape coated on one side with high performance adhesive, and adhered on a siliconized paper liner. Due to its density, it is extremely durable. In addition it has exceptional flexibility and conformability with strength and wear resistance.It is suitable for commercial and general purposes, and it is also mainly used in the electronic industry for fixing parts.Double foam tapeIt is made from a high density, closed cell, cross-linked polyethylene foam coated with adhesive on both sides. It has superb general gap filling capabilities, and distributes stress uniformly when bonding to textured or irregular surfaces. It has a good resistance to humidity, mild acids, oil and grease etc. which makes it suitable for indoor and outdoor environments.It is widely used for pipe insulations; floor and wall paneling trim molding, general mounting of mirror/glass, gasketing and splicing applications. All sizes of foam tape are available upon request.
POPULA New 9-19 High Pressure Centrifugal Fan Product Introduction: This series are use for coercive ventilation in industries such as Ancient furnace , glass , electroplating , ceramics , etc , and are widely used formaterial transportation in processing Industries like food , Feed and slag .The transporting medium is air or other non-spontaneous-combustion and non-explosive-combustion air with no harm to human . The air transferred shall not contain any adhesive material , dust and grain and the concentration shall not exceed 150mg /m�³ , with the temperature no higher than 80â??. PRODUCTS INFO: Type:POPULA High pressure Industrial centrifugal fan 9-19 NEW Brand:POPULA Electric Current:AC Power:7.5~110 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:2305~28078 CMH Air Pressure:2561~11717 Pa Speed:960~2970 rpm Max Noise:
Fly ash is a by-product of coal burning at the utility plants. As coal is burned, non-combustible mineral impurities in coal evaporate andcondense into tiny particles of glass, almost totally spherical inshape. The individual particles are very small, like talcum powderand are carried up and out of the boiler in the flow of exhaust gasesleaving the boiler after the coal is consumed. The fly ash particlesare removed from the exhaust stream in bag houses or electrostatic precipitators and then stored for later shipment The difference between fly ash and Portland cement becomes apparentunder a microscope. Fly ash particles are almost totally spherical inshape allowing them to flow and blend freely in mixture. Thatcapability is one of the properties making fly ash adesirable admixture of concrete.
Our suspended electromagnetic overband separators are designed to remove tramp metal from the product carried by belts vibratory feeders or inclined planes Overbands are mainly used to protect machines such as crushers shredders and others to remove ferrous particles and purify products The electromagnetic overband magnetic separator is used when an automatic removal of ferrous contamination is necessary Application Installation of Mobile Crushers Screens and Shredders Removal of ferrous contamination in glass cullet recycling Installation within an MRF Material Recovery Facility plant Separation of ferrous contamination in quarries Removal of ferrous from Foundry applications Separation of ferrous metals from Municipal Solid Waste Removal of ferrous materials in mining operations Used in Wood Waste processing Separation of ferrous in fragmentiser metal recovery
A Permanent channel magnet is used for the removal of iron impurities from materials like rice flair glaze slip ceramic material glass mineral powder slurry chemical liquid material and food products that are less strongly contaminated The permanent channel magnets are designed in various sizes strengths to meet the specific operation and plant condition The channel magnet can ideally be used to remove tramp iron from material carried in a chute It is mostly used for the chemical slurry and ceramic glaze Salient Features Channel magnet consists of high coercivity modern anisotropic permanent magnet like ferriterare earth magnet Strong rugged construction with MS or SS 304316 construction A working temperature of up to 300 degrees is available
EXTRA VIRGIN OLIVE OIL Tunisian Extra Virgin Olive Oil 100% Natural 0% Cholesterol Our olive oil is an irreplaceable food in the Mediterranean cuisine, reconciling the taste and the benefits of nature. Container 20/ FOB Tunisia / in USD Packaging Units / Carton 1*20' Contenant Glass bottle of 1l 6 bottles 9.000 bottles * Extra Virgin Olive Oil according to 'I.O.O.C' International standards. * 1 x 20' contains 10 palettes (100 x 125 cm). * Minimum quantity: 1 x 20' container. * Delivery Mode: FOB Tunisia. * Payment Mode: Irrevocable & Confirmed L/C at sight. * Expedition: in 3 weeks from date of order's confirmation.
1000W-3000w Raycus Laser source fiber laser welding machine with Wire Feeder Convenient and Flexible Integrated cabinet will laser, chillers, software control and other integration, small area, hand-held joint equipped with 5 meters-10 meters original fiber, flexible and convenient. Welding Once Molding Hand-held operation mode, assembly of special welding nozzle can achieve any part of the workpiece at any angle welding, welding one-time molding, basically no deformation, can meet the high-quality product welding requirements. Beautiful Welding Canopy, No Welding Scar The weld seam is beautiful, no welding scar need not welding firm, weld strength to reach or even exceed the base metal itself. Strong Security Special laser safety operation protection function to ensure the safety of operators during the work, equipped with laser protection glasses, reduce eye damage
Fast curved led uv ink for DX5 DX7for Ricoh G5 printing ink for wood Glass metal printing Compatible models for DX5 DX7for Ricoh G5 Application wooden ,marble etc hard product Shelf life 12 month Feature Vivid colors, fast curing, good adhension and flexibility Products Description Title goes here. 1. High color density ã??Wide color gamut 2. Instant Dryã??Scratch resistance 3.factory direct price 4. Excellent adhesion to both coated and uncoated media 5. VOC free and environmental friendly 6. Superior scratch and alcohol-resistance 7. Above 3 years outdoor durability
Usage: Cylinder UV cure dry UV varnish and UV ink printed on bottles, as plastic bottle and other round metal and glass material article. Bottle rotate automatically in the UV dry area to make sure UV light irradiate on bottles fully. Specification: HC-AUVD-1347 Cylinder UV dryer 1) UV system Conveyor width: 13.7 inch (400mm) 2) UV system Conveyor length: 47.2 inch (1200mm) 3) Max size of article: 13.7 inch *3.5 inch (400*90mm) 4) Speed: 1800~3000Pcs/Hr 5) Conveyor Speed: 0~10M/MIN 6) Stepless speed regulating 7) Lamp power: 4KW 8) Total power: 5KW
Usage: Ink cup manual pad printer can print IC, cosmetic, pencil, key rings, electronics, stationery, small plastic, toys, glass, metal, ceramic, electronics, IC, etc. Manual one color ink cup pad printer with cheap price is very popular for family workshop, small and medium-sized enterprises, shop, advertisement company print. Specification: HC-PM1-22C Sealed cup manual pad printing machine 1) Max print size: 2.3*2.3inch�60*60mm� 2) Plate size: 3.9*9.8 inch�100*250mm� 3) Closed cup: Ф2.7 inch (70mm) 4) Maximum print speed: 400pcs/H 5) horizontal stroke of rubber: 4.7 inch (120 mm) 6) vertical stroke of rubber: 1.9 inch (50 mm) 7) Net weight: 27kg
We here at CWC like the finer things in life, so we developed this sanitizer to be an over the top accommodation. With 70% alcohol derived from sugar cane, freshly squeezed aloe and essential oils including lavender and tea tree leaves, not only is it easy on your hands, but it smells and feels great. I love this stuff, comes in glass jars with droppers to discourage the use of passing around and contaminating the bottle. With discussion, we can even put your label on the bottle, and give your establishment a commission of 10% based on your repeat sales. We have a qr code on every bottle that you can scan and it will pull up information on the product as well as information on how to re-order. Cost per unit depends on units purchased. Container sizes range from 1 ounce to 5 gallons, contact us for further inquiry!
This valve is widely used in the pipe system such as venting and environment protection in building material, glass, mining, power, light industry and papermaking departments. It can change the flow and cut off gas medium in the pipe by the different control signal. The valve has the features of lightweight, compact structure, endurance, little in the lost of flow resistance, high working pressure, flexible operation, definite direction, easy to maintenance and long life. It can be installed at any angle. It is suitable in the condition of adjusting, cutting off and self-protecting quickly. The valve is used with DKJ, ZKJ, Bernard electric actuator and other accessory to form a complete set to realize manual and automatic exchange without interference, micro-computer long-range control, automatic control or center concentrating control. It is the ideal equipment of realizing operation of automatic control and adjusting flow.
Transfer Pipet Custom Grad 2.1mL VWR VWR Disposable Transfer Pipets are ideal for quick and safe fluid transfer. Will not shatter or break Can be used in liquid nitrogen Nontoxic and inert No bulb to insert or remove Uniform drop size These unbreakable all-in-ones graduated transfer pipets eliminate the hazard of broken glass and exposure to infectious materials. Molded from see-through low-density polyethylene, pipets are inert to biological fluids and most acids and can be sealed and refrigerated. The low-affinity surface reduces the loss of cells and valuable proteins due to binding. Ideal for quick, safe transfer of fluids. Transfer pipets can be gas sterilized. Manufactured from LDPE, they can be sealed, refrigerated, and gas sterilized.