Venus Legacy Body Shape slimming device fat removal Radio frequency Skin Tightening Machine. Model: iShape III+ 2024 upgraded best equipo cellulite SPRT v10 sculptor body slim shape machine weight loss for sale 1.Skin Tightening 2. Wrinkle Removal 3. Eyes' area treatments 4. lncrease skin elasticity 5. Fat and cellulite reduction 6. Face wrinkle removal & lifting 7. Warm vacuum cellulite massage 8. Body slimming, contouring & shaping 9. Promote cell metabolism, improveblood circulation 940nm Infrared laser reduces skin impedance by heating skin and RF energy penetrates deeply into connective tissue; The synergistic combination of infrared laser and conducted Bipolar RF energies increase the oxygen intracellular diffusion by heating the skin Vacuum plus specially designed rollers manipulate leads RF penetration to be even 5-15mm. At the same time, Cavitation and Rollers mechanical tissue manipulation nips and stretches fibrillar connective tissue, effectively breaks down subcutaneous fat as well as extruded capillary vessel, Increase lymphatic drainage, promotes metabolism and reduces or shrinks the size of the actual fat chamber and greatly improved body contouring effect; The technology that vacuum folds skin makes RF energy penetrate a specific folded skin, greatly improve effect and safety, even for the upper eyelid area treatment. Technology 1: Cavitation 40KHz Cavitation technology in itself means that the ultrasound causes the fat cells to vibrate so fast (high frequency) so vacuum bubbles are formed in the cell. As a consequence, the outer casing of the fat cells (the membrane) is "blown out" and the fat ends outside the cells. Outside of the membrane, the fat can be broken down to rapidly accessible energy, which is then taken up in the blood or transported by lymph nodes, after which they are either burned or stored in other fat cells elsewhere in the body. Technology 2: Mechanical roller massage The mechanical roller massage works profoundly on densified connective tissues. The mechanical massage rollers enhance the skin's cell-generating activity, resulting in thickened fat deposits being drained. Technology 3: Vacuum massage The vacuum massages lift, mold and massage the skin deep and on the surface. The massage also increases the blood circulation, which in turn leads to the release of fat from the fat cells. The massage further provides a tightening of the skin. Technology 4: Bipolar RF(radio frequency) Bipolar RF makes water molecules in the fat revolve with high speed to produce friction and shock, then triglyceride go out from fat. RF energy with 1-10M could get to 4-15mm skin depth, which makes every layer get heat evenly. The new collagen makes skin turn tighten. This Bipolar RF makes the reorganizing fat cells connect more closely, stimulate the collagen re-grow, avoiding flabby skin after slimming treatment. Technology 5: 980nm infrared light
THE ROLE OF FERROSILICON IN STEELMAKING In steelmaking, ferrosilicon is used for: 1. Product performance Ferrosilicon is a convenient way of adding silicon as an alloying element, to improve various properties of the final steel. 2. Slag reduction In the manufacture of stainless steels, the presence of silicon reduces chromium oxides in the melt, improving the recovery of metallic chromium. 3. Deoxidation Ferrosilicon provides quick-acting removal of oxygen from the melt, so avoiding the presence of inclusion-forming oxides and avoiding loss of desirable elements. 4. Fuel Some steel mills add ferrosilicon to the melt so that it can be burnt off to get heat into the furnace, and so reduce energy costs. We can assure you of the quality of our products and the quality of our services. If you are interested in our products, please get in touch with me.
Discover the Power of High-Carbon Silicon Carbon Alloy! Unleash the ultimate efficiency in your metallurgical processes with our High-Carbon Silicon Carbon Alloy. Engineered to perfection, this innovative alloy delivers exceptional performance with superior carbon content, enhancing steel quality, reducing energy consumption, and optimizing production costs. Experience unparalleled strength and durability, ensuring your products meet the highest industry standards. Choose High-Carbon Silicon Carbon Alloy for unmatched reliability and excellence in every application. Elevate your production with the best in alloy technology. Choose quality. Choose performance. Choose High-Carbon Silicon Carbon Alloy.
Calcium silicon cored wire has the following uses: 1. It is beneficial to adjust and control the content of easily oxidizable elements and trace elements, reduce smelting cost, shorten smelting time, and accurately control the content of ingredients. 2. It can purify molten steel and partially change the nature and shape of inclusions, and improve the quality and casting state of molten steel. 3. Use the cored wire to process the molten steel, the alloy elements react smoothly in the molten steel, which can avoid secondary oxidation. After the reaction, the floating rate of the inclusions is fast, and the purification treatment effect is uniform. 4. The use of cored wire in steelmaking or cast iron production can avoid bringing gas into molten steel. 5.The scope of application covers the fields of communications, television broadcasting, computer networks, aerospace, and security monitoring systems. It plays an important role in these fields and provides stable and reliable support for signal transmission.
High Carbon Silicon-Replacement for FeSi as deoxidizer used in carbon structural steel carbon steel,alloy steel,deformed steel bar manufacturing. High Carbon Silicon 's other name is Silicon Carbon Alloy
Key Features: Chemical Composition: Silicon Carbide (SiC) Physical Properties: High hardness, low density, superior thermal shock resistance. Electrical Properties: High electrical conductivity, low dielectric loss. Thermal Properties: High thermal conductivity, excellent heat resistance. Applications: Metallurgical Industry: Lining for high-temperature furnaces. Chemical Industry: Reactor linings and catalyst supports. Electronics Industry: Semiconductor manufacturing. Mechanical Industry: High-performance mechanical components.
It is used as a deoxidiser and alloying agent in the steelmaking industry. In order to obtain a steel with a satisfactory chemical composition and to guarantee the quality of the steel, it is necessary to deoxidise it in the final stage of steelmaking. The chemical affinity between silicon and oxygen is very large, and ferrosilicon is therefore a strong deoxidising agent in steelmaking for precipitation and diffusion deoxidisation. ... It is used as an inoculant and spheroidising agent in the iron casting industry. ... Used as reducing agent in ferroalloy production.
(1) Manganese and manganese alloy is one of the indispensable raw materials in the iron and steel industry, aluminum alloy industry, magnetic material industry and chemical industry. (2) Manganese Metal is an indispensable additive in smelting industry. Electrolytic metal manganese processing into powder is the main raw material for the production of manganese tetroxide. (3) Electrolytic manganese metal due to its high purity, low impurity characteristics, has been successfully and widely used in iron and steel smelting, non-ferrous metallurgy, electronic technology, chemical industry, environmental protection, food hygiene, electrode industry, aerospace industry and other fields. (4) The purity of electrolytic manganese is very high, its role is to increase the hardness of metal materials, the most widely used in manganese copper alloy, manganese aluminum alloy, 200 series stainless steel. Manganese in these alloys can improve the strength, toughness, wear resistance and corrosion resistance of the alloy.
Ferrosilicon alloy is a deoxidizer used in steelmaking production. It improves the shape of inclusions and reduces the content of gas elements in molten steel. It is an effective new technology to improve steel quality, reduce costs, and save aluminum. It is especially suitable for the deoxidation requirements of continuous casting molten steel. Practice has proved that it not only meets the deoxidation requirements of steelmaking, but also has desulfurization performance and has the advantages of large specific gravity and strong penetrating power. The production of silicon-aluminum ferroalloy can be divided into the following three stages 1. Generation of silicon carbide At lower temperatures, SiO2 reacts with carbon to produce silicon carbide, 2. Generation of aluminum oxide carbides and carbides In the temperature range of 1600~2000�ºC, carbon reacts with aluminum oxide to form aluminum oxide and silicon carbide; 3. Intermediate compounds such as carbides decompose silicon-aluminum-iron to form. At a higher temperature, aluminum oxide, silicon carbide, aluminum carbide and silicon dioxide react to obtain silicon-aluminum; only high-quality silicon-aluminum ferroalloy can produce high-quality silicon-aluminum iron blocks. When purchasing silicon-aluminum iron balls, you need to pay attention to Its quality, the quality of silicon aluminum iron ball has a direct impact on its application.
High carbon ferrosilicon is ferrosilicon with a larger carbon content; High carbon ferrosilicon specifications and particle size: natural block, 10-100mm, powder or customized according to customer requirements. Packaging of high carbon ferrosilicon: tons of bags (1000kg/bag) or customized according to customer requirements. High carbon ferrosilicon uses: High-carbon ferrosilicon is a new type of alloy used in converters. It can replace ferrosilicon, silicon carbide, and carburizers, reduce the amount of deoxidizer, and is used in the deoxidation alloying process of converter smelting. The effect is stable, and the chemical composition, mechanical properties and The quality of internal control is better than that of traditional processes. As a new type of strong composite deoxidizer, it can also be used for tempering general steel, alloy steel and special steel. In addition, as a temperature-raising agent, it can replace the more expensive traditional temperature-raising agent required in converter and open-hearth steelmaking.
High carbon ferrosilicon is ferrosilicon with a larger carbon content; High carbon ferrosilicon specifications and particle size: natural block, 10-100mm, powder or customized according to customer requirements. Packaging of high carbon ferrosilicon: tons of bags (1000kg/bag) or customized according to customer requirements. High carbon ferrosilicon uses: High-carbon ferrosilicon is a new type of alloy used in converters. It can replace ferrosilicon, silicon carbide, and carburizers, reduce the amount of deoxidizer, and is used in the deoxidation alloying process of converter smelting. The effect is stable, and the chemical composition, mechanical properties and The quality of internal control is better than that of traditional processes. As a new type of strong composite deoxidizer, it can also be used for tempering general steel, alloy steel and special steel. In addition, as a temperature-raising agent, it can replace the more expensive traditional temperature-raising agent required in converter and open-hearth steelmaking.
(1) Manganese and manganese alloy is one of the indispensable raw materials in the iron and steel industry, aluminium alloy industry, magnetic material industry and chemical industry. (2) Manganese Metal is an indispensable additive in smelting industry. Electrolytic metal manganese processing into powder is the main raw material for the production of manganese tetroxide. (3) Electrolytic manganese metal due to its high purity, low impurity characteristics, has been successfully and widely used in iron and steel smelting, non-ferrous metallurgy, electronic technology, chemical industry, environmental protection, food hygiene, electrode industry, aerospace industry and other fields. (4) The purity of electrolytic manganese is very high, its role is to increase the hardness of metal materials, the most widely used in manganese copper alloy, manganese aluminium alloy, 200 series stainless steel. Manganese in these alloys can improve the strength, toughness, wear resistance and corrosion resistance of the alloy.
1.Ferro silicon is often used as deoxidizer in steel making. 2.Ferro silicon also can be used as alloy elements join agent,which is widely used in low alloy steel,non-ferrous metal,bearing steel,heat-resistant steels and electrician silicon steel. 3.Ferro silicon commonly used as a reductant in ferroalloy production and chemical industry. 4.In iron industry,ferro silicon often used as inoculant and nodulizer and deoxidizer.
Ferrosilicon Si 75# 72# size 10-100mm, customizable, Ferrorsilicon powder Si 69-73# size 0-1mm, customizable, China high quality ferrosilicon supplier
High carbon ferrosilicon is ferrosilicon with a larger carbon content; High carbon ferrosilicon specifications and particle size: natural block, 10-100mm, powder or customized according to customer requirements. Packaging of high carbon ferrosilicon: tons of bags (1000kg/bag) or customized according to customer requirements. High carbon ferrosilicon uses: High-carbon ferrosilicon is a new type of alloy used in converters. It can replace ferrosilicon, silicon carbide, and carburizers, reduce the amount of deoxidizer, and is used in the deoxidation alloying process of converter smelting. The effect is stable, and the chemical composition, mechanical properties and The quality of internal control is better than that of traditional processes. As a new type of strong composite deoxidizer, it can also be used for tempering general steel, alloy steel and special steel. In addition, as a temperature-raising agent, it can replace the more expensive traditional temperature-raising agent required in converter and open-hearth steelmaking.
Ferro-Silico-Aluminum is a deoxidizer used in steelmaking production. It improves the shape of inclusions and reduces the content of gas elements in molten steel. It is an effective new technology to improve steel quality, reduce costs, and save aluminum. It is especially suitable for the deoxidation requirements of continuous casting molten steel. Practice has proved that it not only meets the deoxidation requirements of steelmaking, but also has desulfurization performance and has the advantages of large specific gravity and strong penetrating power.
Alloy cored wire plays an important role in the smelting process. The specifications and sizes of cored wire are customized based on specific smelting processes and application requirements. The selection of appropriate materials and diameter is based on the operating environment and engineering specifications. Cored wire can provide different tensile strengths and load-bearing capacities to meet the demands of the smelting process. Cored wire is used in the manufacturing of refractory materials and as electrodes in electric arc furnaces, among other applications. Its high strength, corrosion resistance, and stability make it an indispensable material in the metallurgical industry.
Silicon carbide is composed of carbon and silicon elements. It has many excellent properties, making it widely used in various fields. With outstanding high temperature resistance, it can withstand temperatures above 1600�°C. Silicon carbide can be used as a refining agent in the steelmaking process. It provides high-temperature reduction, helping to remove impurities and oxides from the steel, improving its quality and purity. Due to its unique properties, silicon carbide finds wide application in areas such as abrasive tools, high-temperature equipment, steelmaking, chemical industry, optical components, and solar energy. Additionally, silicon carbide is also used in the production of ceramic products, thermal barrier coatings, and catalysts.
Silicon carbide is composed of carbon and silicon elements. It has many excellent properties, making it widely used in various fields. With outstanding high temperature resistance, it can withstand temperatures above 1600�°C. Silicon carbide can be used as a refining agent in the steelmaking process. It provides high-temperature reduction, helping to remove impurities and oxides from the steel, improving its quality and purity. Due to its unique properties, silicon carbide finds wide application in areas such as abrasive tools, high-temperature equipment, steelmaking, chemical industry, optical components, and solar energy. Additionally, silicon carbide is also used in the production of ceramic products, thermal barrier coatings, and catalysts.
Various models can be customized 1.Ferromanganese is an essential deoxidizer and desulfurizer in steelmaking industry. 2.Good need in smelting, steel deoxidation desulphurization processing, and ferromanganese is a cheap deoxidizer, 3.such as ferromanganese we can achieve the purpose of the desulfurization very well, effectively reduce the content of harmful elements in steel, improve the quality of steel.
