Transition taper thread couplers are designed to splice different diameter bars where one bar can be roated and the bar is not restricted in its axial direction.
Upset Parallel Threaded Rebar Coupler 100% bar break through tensile test. Material of the rebar coupler is No.45 steel. High precision thread, full thread type, no false thread.
Hebei Yida BGZL-40B3 steel bar straight screw thread processing rib peeling machine is the exclusive use rib peeling knurling machine for the straight screw thread connecting. It is mainly used in the processing/fabrication of the end of the structural steel bar. Positive And Negative Screw Thread Model Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted.
1. Wide range of application, no weldability requirements for rebar, suitable for �?12 ~ 50mm HRB400, HRB500 same diameter or reducing diameter steel bar connection in any direction; 2. Convenient construction, fast connection speed, and the on-site connection and assembly operations take up a short time; 3. Environmentally friendly construction, no noise and pollution on site, safe and reliable.
YDZTS-40C Rebar Taper Thread Cutting Machine is designed and manufactured by Hebei Yida Reinforcing Bar Connecting Technology Co., Ltd. 1. It is mainly used as a special equipment to make taper thread on the end of the rebar in the processing of rebar connection. 2. The applicable diameter is from �¯�¿� 16 to �¯�¿� 40. It applies to Grade �¢?�¡ and �¢?�¢ level rebar. 3. It has reasonable structure, light and flexible, simple operation, high production efficiency. It is widely used in steel bar end processing of taper thread joints in concrete works. 4. It adapts to a variety of complex construction site environment.
Rebar Cold Extrusion Technology The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump.� Only 1 â?? 3 kw power of oil pump, which is not limited by power capacity, has flexible structure and suitable for operation on several machines. Advantages: No professional and experienced worker needed, able to connect changed steel bar of different diameters. Save 80% of connector steel consumption. Only needs 1 3m to stamp each connector, which is about ten times faster than ordinary welding. No flammable gases, not affected by rainy or cold weather. Relieve congestion of the connecting point, facilitated concrete pouring.
This Automatic Upset Forging Machine is the preparative machine for rebar connection in construction work. Its main function is to forging the end part of rebar to raise the rebar area and therefore enlarge the strength of rebar end.
Through the headed bars of anchor plate to increase the friction between the concrete and steel, improve its ability to resist drawing, in case of steel was pulled out,instead of bent ends. It is approach greatly simplifies rebar placement and reduces congestion.
Comparison of using laps and rebar coupler: 1. Reduce or eliminate some of the costs of lap splicing by using rebar coupler. 2. The use of laps can be time-consuming in terms of desigh and installation and the increased amount of rebar creats congestion within the concrete The Characteristics of the Usage Standard Model used in the occasion for connecting the steel bar in normal situation Different Diameter Model used for connecting the steel bar in different diameters Flared Model used for the steel bar which was hard to match Positive And Negative Screw Thread Model Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. Locking Nut Model Used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
BGZL-40B3 steel bar straight screw thread processing rib peeling machine is the exclusive use rib peeling knurling machine for the straight screw thread connecting. It is mainly used in the processing of the top of the structural steel bar.
Used for the cluster-type mill of Brand Sendzimir Material for working shaft: D2, H13,Cr12MoVCo, DC53, etc. Application: stainless steel band, thin trip, colored strip, silicon steel sheet. What we could supply: hot forged mold steel, plastic mold steel, aluminum extrusion die steel. Diameter range: 60-350mm, even 1500-2000mm What you should offer for quote: blueprint, delivery time, detail other requirements, etc.
we are manufacturer of PIPE FITTINGS that contains T, Elbow etc in hot forge size M6-M100 and more as per client requirements and in all grades and standards
we are manufacturer of ALLEN, J, L, ANCHOR BOLTS in hot forge size M6-M100 and more as per client requirements and in all grades and standards
we are manufacturer of LIFTING EQUIPMENTS in hot forge size M6-M100 and more as per client requirements and in all grades and standards
we are manufacturer of D SHACKLES in hot forge size M6-M100 and more as per client requirements and in all grades and standards
we are manufacturer of THIMBLE in hot forge size M6-M100 and more as per client requirements and in all grades and standards
we are manufacturer of U BOLT in hot forge size M6-M100 and more as per client requirements and in all grades and standards
we are manufacturer of WING BOLT AND NUT in hot forge size M6-M100 and more as per client requirements and in all grades and standards
we are manufacturer of SQUARE BOLT AND NUT in hot forge size M6-M100 and more as per client requirements and in all grades and standards
we are manufacturer of T BOLT in hot forge size M6-M100 and more as per client requirements and in all grades and standards