ARSPL UPVC ROOF SHEET 1) Heat insulation up to 40%. Excellent Thermal Insulation: Thermal Conductivity 0.104 W/m* C 2) Excellent sound insulating properties 3) Resistance to acids, alkalis, salts and solvents, corrosion 4) Resistance to the extreme weather conditions: snow, hail, high wind â??pressure 5) High Strength Characteristic: Tensile Strength 29~31 MPa, Flexural ` strength 45~55MPa, Impact Resistance 50~60kJ/m2 6) Temperature usage Range: from -40 C to +75 C. Material `withstands over 100 cycles of freezing and thawing 7) Color Fastness: Pigments used are 8 points on the BW Scale 8) Light Weight: 3.6Kg/m2 9) Resistance to the influence of ultraviolet rays. Highly UV protected. 10) Non-combustible nature of the material. Class B1 Retardant Building Materials. Fire Retardant. 11) Easiness of installation: material can be easily cut, drilled, and sawn 12) Absolute waterproof properties 13) Flexibility: material allows roofing of hanger-type structures and spherical fencing 14) Economical Installation: overlapping waste doesnâ??t exceed 8%. High utilization efficiency up to 95% 15) Availability of the same profile transparent sheets for the creation of sky-- lights. 16) Wide Variety of available colors. Good aesthetic appeal. 17) Cost-effective in installation and saves construction costs up to 70%. 18) Eco-friendly & Energy Efficient Green product. 19) Non-Carcinogenic 20) Increases labor productivity and machinery efficiency 21) Non-conductor of electricity. 22) Long life 23) Compulsory for some industries like chemical, pharma, fertilizer, leather, process, etc.
Rebar Coupler The splicing couplers model is divided into 9 categories according to the Rebar Coupler. (Unit: mm) 1).The parameter of couplers Size(mm) O D�±0.5ï¼?mmï¼? Threadï¼?mmï¼? L�±0.5 (mm) Pitch Rib peeling coupler weight/pc (kg) Thread Angle �¦16 25 M16.5 40 2.0 0.111 60 Degree �¦18 28 M18.5 45 2.5 0.136 �¦20 31 M20.5 50 0.175 �¦22 33 M22.5 55 0.203 �¦25 37 M25.5 60 0.266 �¦28 41 M28.6 70 3.0 0.375 2).The Characteristics of the Usage Mode usage occasion Standard Model used in the occasion for connecting the steel bar in normal situation Different Diameter Model used for connecting the steel bar in different diameters Flared Model used for the steel bar which was hard to match Positive And Negative Screw Thread Model Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. Locking Nut Model Used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut. 3).The material of the splicing coupler The material of the splicing coupler is constructional quality steel of No.45 steel.
Thermal Paper Roll is acknowledged for it's precisely cut shape, uniform coating on both of its sides and excellent surface toughness. This type of paper roll is used as receipt paper for cash registering system, POS equipment and thermal printer. This paper roll ensures bright image quality for its anti wrinkle properties. Bright quality advertisement or logo can be easily printed on its even surface. Due to its smooth edge design, this paper easily passes though machine sans creating blockage. Plain pattern, high strength, tears and moisture proof surface, compatibility with different printers and cost effectiveness are the main features of this paper roll. We would like to introduce ourselves as a reliable manufacturer and exporter of Thermal Paper Roll. Key Features:- ï?· Durable Core Pipeï?· Long lasting Image Lifeï?· Smooth Surface with lowest Fray on Printer Headsï?· Shrink-Wrapped in Packages of 10ï?· BP Free (Contains no Bisphenol A)ï?· 100% Lint Free Paper Reduces Printer Jams· Finished with Gum, Easy to Change OverAVAILABLE SIZE:ï?° GSM : 48 - 75 gsmï?° POS Rollï?° 57 mm * 15 ,20 ,25 ,30 meter (2-1/4)ï?° 79 mm * 50 ,60 ,70 ,75 meter (3-1/8)
We are thrilled to introduce our premium line of organic fertilizers, sourced directly from the rich and fertile lands of Indonesia, to your esteemed company in your country. We pride ourselves on delivering high-quality agricultural solutions that promote sustainable farming practices and enhance crop yields. With a commitment to eco-friendly production methods, we strive to support the growth of healthy plants while minimizing the ecological footprint of agriculture. Here are some key features of our organic fertilizers: 1. Natural Ingredients: Our fertilizers are made from organic materials such as compost, animal manure, and plant residues, providing essential nutrients for plant growth without the use of harmful chemicals. 2. Soil Health: By enriching the soil with beneficial microorganisms and organic matter, our fertilizers promote soil fertility, structure, and moisture retention, fostering a conducive environment for plant roots to thrive. 3. Sustainable Agriculture: We believe in promoting sustainable farming practices that preserve natural resources and minimize environmental impact. Our organic fertilizers are a testament to our commitment to sustainability. We understand the importance of reliable and high-quality inputs for agricultural success, and we are dedicated to providing your company with top-notch products and exceptional service. Please find detailed product information, pricing, and terms of sale for your review below: Vermicompost 5 Ton : USD 2,500 Vermicompost 10 Ton : USD 4.800 Vermicompost 20 Ton : USD 9,000 We look forward to the opportunity to serve you and contribute to the success of your agricultural endeavours in your country.
Digital Track Gauge can directly read the measurement values of railway track gauge, super elevation , check rail gauge, back to back distance and flangeway clearance through microelectronics, embedded and sensor technologies and OLED display screen. FEATURE 1. Large LED backlit display: especially suitable for day outside and dark night 2. Quick calibration operation: simple measurement process 3. Large capacity battery:long standby time 4. Accurate measurement:keep long-term stability 5. Temperature compensation :working temperature is -30~+55â?? 6. Insulated design 7. Anti-electromagnetic interference 8. Waterproof:could use in rainy day 9. power saving function: no operation within 15 minutes, the system will automatically shut down. 10. Approval by CHINA ACADEMY OF RAILWAY SCIENCES 11.1000mm,1067mm,1435mm,1520mm,1600mm,1676mm track gauge is available. SPECIFICATION Model(1435mm) GJC-TJG1 Track gauge(mm) 1384-1470 Gauge rail check gauge(mm) 1364-1450 Guard rail face gauge(mm) 1344-1430 Superelevation measuring range(mm) -200~+200 Flangeway Clearance(mm) 20-107 Superelevation division value(mm) 0.10 Track gauge division value(mm) 0.1 Track gauge max indication error(mm) ±0.25 Superelevation error(mm) ±0.45 Application rail line railway speed less than 250km/h
Color-coated aluminum coils are painted on the surface of aluminum substrates. Commonly used are fluorocarbon color-coated aluminum coils and polyester color-coated aluminum coils. They are widely used in aluminum-plastic panels, industrial factory roofs and walls, aluminum louvers, and composite panels. , aluminum ceilings, cans, electronic products. Commonly used alloy numbers for colored aluminum coils include AA1050, 1060, 1100, 3003, 3004, 3105, 5052, 5005, 5754, 5083, 6061, 6063, 8011, etc. Characteristics of color-coated aluminum coils: 1. Smoothness: There are no composite high temperature indentations on the surface. There is no residual stress on the board surface and no deformation after shearing. 2. Decoration: Painted with wood grain and stone grain, it has a realistic physical texture and a vivid natural beauty. The patterns can be made randomly, giving customers a wide range of personal choices, enriching the humanistic connotation of the product, and giving people more beautiful enjoyment. 3. Weather resistance: The paint pattern formed by continuous coating and high-temperature baking has high gloss retention, good color stability, and minimal color difference changes. Polyester paint has a 10-year warranty, and fluorocarbon paint has a 20-year or more warranty. 4. Mechanical: Use high-quality aluminum materials, plastics and adhesives, and adopt advanced composite technology. The product has the bending and flexural strength required for decorative panels. Under four-season climate conditions, changes in wind pressure, temperature, humidity and other factors will not cause bending, deformation, expansion, etc. 5. Environmental protection: It is resistant to salt, alkali and acid rain corrosion. It will not corrode or produce poisonous bacteria. It will not release any toxic gases and will not cause corrosion of keels and fixings. It is flame retardant. According to national regulations, it shall not be lower than B1 level.
Soybean Seed 1. Introduction: Soybean seeds, scientifically known as Glycine max, are a valuable leguminous crop renowned for their high protein and oil content. A versatile commodity, soybean seeds find application in various industries, including food processing, animal feed production, and oil extraction. This product information guide provides key details about soybean seeds, covering their characteristics, nutritional value, common uses, and storage considerations. 2. Characteristics: Shape and Size: Soybean seeds are typically small, oval-shaped legumes with a length ranging from 5 to 11 mm. Color: The color of soybean seeds can vary, including shades of yellow, brown, or black, depending on the variety. Texture: The seed coat is smooth, and the seeds have a firm yet easily crushable texture. 3. Nutritional Composition: Protein Content: Soybean seeds are prized for their high protein content, ranging from 35% to 40%. This makes them a valuable source of plant-based protein. Oil Content: Soybeans contain approximately 18% to 20% oil, primarily consisting of polyunsaturated fats. Carbohydrates: The carbohydrate content is moderate, providing energy and dietary fiber. Vitamins and Minerals: Soybeans are rich in vitamins (B-complex) and minerals (iron, calcium, magnesium), contributing to their nutritional profile. 4. Common Uses: Edible Oil Production: Soybean oil is extracted from the seeds and widely used in cooking and food preparation. Animal Feed: Soybean meal, a byproduct of oil extraction, is a valuable protein source in livestock and poultry feed. Food Products: Soybeans are processed into various food products, including tofu, soy milk, soy sauce, and textured vegetable protein (TVP). Industrial Applications: Soybean oil is used in non-food applications such as biodiesel production and as a base for industrial lubricants. 5. Storage Considerations: Moisture Control: Soybean seeds should be stored in a cool, dry place to prevent moisture absorption and reduce the risk of mold growth. Airtight Containers: Packaging should be airtight to maintain freshness and prevent the seeds from becoming rancid due to exposure to air. Temperature: Storage temperatures should ideally be below 25�°C to preserve the quality of the seeds.
Features: 1) Beautiful The remote control robot chassis is beautiful in appearance. The fuselage is large, and the space reserved for development is sufficient. 2) Strong The bottom of the fuselage is reinforced to carry heavy loads. The installation position of the travel motor has also been reinforced to prevent deformation and displacement. The tires are lawn tires with a width of 15cm, which are beautiful, durable, large in width and strong in support. 3) Mature technology This product is modified on the basis of our very mature remote control lawn mower, an economical chassis product. It adopts the mature walking motor controller on our remote control lawn mower, which has the characteristics of sensitive response and fast response speed. The built-in smart chip can intelligently detect the current and heating conditions, which can ensure stable use all year round. And it has a slow start function, the operation is smooth, and there will be no frustration when accelerating or decelerating suddenly. 4) Scalability Equipped with a function expansion HUB, which can control additional 4 channels, it can easily control and expand other functions required by customers without professional remote control knowledge. On the basis of our chassis, you can freely add other functional modules to create a new vehicle that meets your own needs. Specification: Walking Speed: 0-6km/h Working Temperature: -20~55�° Remote Control Range: 200m Walking Motor Motor Type: Brush electric traction Voltage / Power: 24V / 350W Reduction Ratioï¼?23.2:1 Rotating Speed: 75RPM Rated/Max Output Torque: 18.4/55Nm Wheel: 15X6.00-6 vacuum tire Battery: 24V 20Ah Remote Control Channel: 7 Extended Controllable Channel: 4 Payload: 50~300kg Wheelbase: 810mm Track: 890mm Overlay Panel: 990*625mm Machine Size: 1070*1035*430mm Machine Weight: 98kg Package Size: 1150*1120*600mm Gross Weight: 130kg
Certainly, here is the list of the RAGS offered by BACK: 1. BACKPure White RAGS 2. BACKCare White RAGS 3. BACKBlend White RAGS 4. BACKHarmony White RAGS 5. BACKHarmony Colored RAGS 6. BACKVital Colored RAGS 7. BACKWave White Sheet RAGS 8. BACKBreeze White Towel RAGS 9. BACKLoop White Towel RAGS 10. BACKHarbor Colored RAGS 11. BACKZen Fleece/Sweatshirt RAGS All of our BACKRags and BACKTowel RAGS are new. And have never been used before. We collect these Rags as cut pieces, leftover, surplus from export-oriented factories. During the outline-cutting process of the T-shirt, thousands of pounds of excess cloth is left over. In steps BACK RAGS! We take that excess cloth and cut it to size about 37cm up to 63cm. These materials are pre-consumer mill-end products. Essentially this means that the rags are t-shirt material that was never made into a T-Shirt. Minimum Order Quantity: Embark on this journey of quality with a minimum order of 10,000 KG ( 1 X 20' FCL ) or, 25,000 KG ( 1 X 40' HCL ) Payment: Secure your order with ease through a payment structure of 70% T/T in advance, followed by 30% T/T against the scanned copy of the B/L. Shipment: Your satisfaction is our priority; hence, we ensure shipment within 15 days of receiving your advance payment.
Product: Palm Kernel Expeller First of all, we would like to take this opportunity to introduce ourselves to your esteem company that we are exporters in Indonesia various� types of Palm Kernel Expeller. CV.SIBURUI NAIK DAUN was established in the year of 2020. Our company carries wide product ranges that cater to manufacturers, wholesalers & export to overseas. We may offer various type of Palm Kernel Expeller from different origin of archipelago Indonesia,in small and big quantity which is packed in bulk packing to fulfill your requirement � Our Palm Kernel Expeller  specsifications are: Protein Content : 14.59% (Standart : GAFTA 130 4:1) Fat Content : 9.70% (Standart : GAFTA 130 2:1) Moisture Content max : 4.86% (Standart : GAFTA 130 3:0) Raw Fiber : 16.38% (Standart : ASTM D 3174-12) Ash Content : 3.72% (Standart : GAFTA 130 9:0) Sand/Sillica : 0.79% (Standart : GAFTA 130 13:0) Salmonella : Negative (SNI 2897-2008) MOQ : 20 Tons Single origin from: 1. Borneo Island, Indonesia Delivery Time: 30 - 60 Days After Receive Payment Port of Loading : Surabaya Port, Indonesia Price FOB Surabaya Port : $350.00 (Negotiable) Please Do not hesitate to contact us if you interested in any of the above commodities and we shall serve you promptly and respectively.
Hi-Rise led street light is a new LED street light released by Hishine Group Limited. The LED street light shell is made of ultra-thin Die-Casting aluminum, which makes the LED street light have good heat dissipation performance. Under the same conditions, the light decay of the LED street light is about 20% less than other ordinary LED street lights. In addition, Hi-Rise LED street light has a unique buckle design, which can easily install the street light on both sides of the road. Hi-Rise LED Street Light Features 1.Waterproof IP65,high thermal conductivity housing 2.Beam angle TypeII,TypeIII,TypeIV,TypeV,25�° 60�° 90�° PC+glass lens 3.Support smart control: photocell, motion sensor, lora, zigbee etc. 4.High lumen SMD3030 chip, luminous efficacy 175Im/w 5.Ultra slim heat sink design makes the lamp lighter and betier in heat dissipation Advantages of LED street lamps Hi-rise LED Street Light is the most cost-effective professional LED street light launched by Hishine Group. Hi-rise was designed to provide customers with tool-free installation, lower maintenance costs, and lower operating costs. Hi-rise LED Street Light features modern streamlined geometry, exquisite design, attention to detail, and outstanding application performance, energy efficiency and system reliability. LED Street Light Beam Angle Hi-rise LED Street Light has obvious advantages in structural strength, corrosion resistance and heat dissipation due to its strong structure and smooth design. Secondly, Hi-rise LED Street Light has excellent light quality. 250 w Lumen Output can reach 43750 LM, Luminous Efficacy is as high as 175 w/LM, and there are TypeII, TypeIII, TypeIV, TypeV, 25 to 60 , 90 a variety of optional light Angle.
We are manufacturing shapes of cubes, flats, pipes, fingers, rounds, pillows, and hexagonal. Size may vary from 18 to 50 mm. It is better to choose charcoal shapes according to the customerâ??s request. The main parameter to choose is ash content â?? how much ash is left after charcoal briquettes are burned down. Less ash is better. We are manufacturing briquettes with ash content of 1.8 â?? 2.2%; 2.2 â?? 2.5%; 2.5 â?? 3.0% and 3.0 and up. The most common ash content is 2.2 to 2.5%. There are a lot of variants to choose from. The basic is an inner box (brand box) of 1 to 5 kg packed inside the master box (10 or 20 kg). The inner box can be made with laminating (glossy or doff), with embossing or gold/silver plating. Mostly inner box is made in full color. The master box can be done in full color or black and white only. It is recommended to use a double wall. It is slightly more expensive than a single wall but makes a box much stronger. Forth step is to confirm your payment details and manufacturing schedule. Keep in mind that production can take up to 2 weeks. Plus we need time of 3 days to pack and staff the container. We provide invoices with specification details. By request, we can sign an additional export contract for you to comply with your country requirements
Customized stamped parts progressive die Stamped Parts Progressive Die, Progressive Stamping Die Factory Dongguan Huisoelec Limited, established in August 2009 and located in the hometown of Chinese molds - Chang'an Town, Dongguan City, Guangdong Province, is a professional manufacturer of precision tooling and metal stamping company, such as precision connector, precision terminal, fixed rotor motor, housing, precision shrapnel etc., ranging from small to complex size, metal and plastic components. Out products are widely used in hundreds of application, for example, mobile computer equipment, digital cameras, mobile communications equipment, automotive / aviation / marine electronic components, medical electronics, smart appliances, IC, 3C products and outdoor waterproof fields and so on. No. Item Description 1 Tooling type Stage die/progressive die/drawing die 2 Tooling Material RK887, CD650, KD20, SKD11, SKH9, DC53 3 Application Electronics, electrical appliance, auto parts, medical, communication and military field etc., 4 Punching machine 25T, 35T, 45T, 60T, 110T, 200T, 250T 5 Lead time 8, 12, 15, 20, 25 or 30 days (depends on the real situation of tooling) 6 Tolerence ±0.002 7 Mold life Max 100kk, depends on the clients need 8 Packing Plastic, carton or wooden box etc., according to the clients requirements
High quality electronic parts stamping die Oem electronic stamping die, china high quality electronic stamping die factory Dongguan huisoelec limited, established in august 2009 and located in the hometown of chinese molds - chang'an town, dongguan city, guangdong province, is a professional manufacturer of precision tooling and metal stamping company, such as precision connector, precision terminal, fixed rotor motor, housing, precision shrapnel etc., ranging from small to complex size, metal and plastic components. Out products are widely used in hundreds of application, for example, mobile computer equipment, digital cameras, mobile communications equipment, automotive / aviation / marine electronic components, medical electronics, smart appliances, ic, 3c products and outdoor waterproof fields and so on. No., item, description 1, tooling type, stage die/progressive die/drawing die 2, tooling material, rk887, cd650, kd20, skd11, skh9, dc53 3, application, electronics, electrical appliance, auto parts, medical, communication and military field etc., 4, punching machine, 25t, 35t, 45t, 60t, 110t, 200t, 250t 5, lead time, 8, 12, 15, 20, 25 or 30 days (depends on the real situation of tooling) 6, tolerence, ±0.002 7, mold life, max 100kk, depends on the clients need 8, packing, plastic, carton or wooden box etc., according to the clients requirements
Precision Connector Terminal Stamping Die Connector Stamping Mould, High Quality Drawing Die Dongguan Huisoelec Limited, established in August 2009 and located in the hometown of Chinese molds - Chang'an Town, Dongguan City, Guangdong Province, is a professional manufacturer of precision tooling and metal stamping company, such as precision connector, precision terminal, fixed rotor motor, housing, precision shrapnel etc., ranging from small to complex size, metal and plastic components. Out products are widely used in hundreds of application, for example, mobile computer equipment, digital cameras, mobile communications equipment, automotive / aviation / marine electronic components, medical electronics, smart appliances, IC, 3C products and outdoor waterproof fields and so on. No. Item Description 1 Tooling type Stage die/progressive die/drawing die 2 Tooling Material RK887, CD650, KD20, SKD11, SKH9, DC53 3 Application Electronics, electrical appliance, auto parts, medical, communication and military field etc., 4 Punching machine 25T, 35T, 45T, 60T, 110T, 200T, 250T 5 Lead time 8, 12, 15, 20, 25 or 30 days (depends on the real situation of tooling) 6 Tolerence ±0.002 7 Mold life Max 100kk, depends on the client's need 8 Packing Plastic, carton or wooden box etc., according to the client's requirements
Product model: KY911 wear-resistant flux cored wire Product specifications: 1.2mm 1.6mm 15kg / box Post-weld hardness: HRC 65-70° Scope of application: It is suitable for high hardness and hard surface treatment of parts with high wear and high impact. It is suitable for surfacing welding with strong abrasion resistance. It has wide application range and high quality. Metal composition (%): C 3.00-6.00; Mn 2.00-3.00; B 5.00-8.00; Cr 20.00-25.00; Ni 2.00-3.00; Mo 2.00-3.00 Precautions: 1. Adopt DC reverse connection; 2. When welding, the flow rate of CO2 gas should be 20~25L/min; 3. The dry elongation of the wire should be controlled within the range of 15~25mm; 4. The temperature between the channels is recommended to be kept at around 300 °C; 5. Before welding, the weldment must be cleaned of rust, oil, moisture and other impurities. Precautions:   Precautions for use: The wear-resistant solder layer should generally be surfacing 1 layer. Because the number of layers is too much, the surfacing layer becomes brittle due to too high hardness and is easily broken after collision. Due to the high hardness, the welding wire has a cracking sound during the welding, and a small crack occurs, which is a normal phenomenon and does not fall off, and does not affect the service life.   We are a real wear-resistant welding consumables production factory, with a complete production process and inspection process, to provide you with high quality and cost-effective wear-resistant welding consumables.
Baby Diaper Nonwovens Fabrics, No Smell Non Woven Fabrics, Breathable Nonwoven Fabrics Manufacturer. REASONS TO CHOOSE NONWOVENS FOR BABY DIAPER: . Super soft like cotton . Good uniformity . Hydrophilic or Hydrophobic . Breathable . No smell . No stimulation to skin . Eco-friendly PRODUCT SPECIFICATIONS: 1) Professional factory direct 2) Timely delivery; 3) QC team 4) No dust workshop, Automatic-packing, on-line monitor, barcode label; 5) SGS Certificate Products: SSS nonwoven fabrics for baby/adult diaper Raw material: 100% Polypropylene Technics : Spun bonded Basic Weight: 9~35g/m2 Color: white, blue, light yellow or others Width: 100--3200mm Roll diameter: within 1200mm Production Capacity: 1200tons/month Lead time: two weeks after getting deposit Payment term: 30% deposit, balance against copy of BL or L/C at sight Packaging: Rolling, inside paper core with ID 76mm, outside PE/shrink film MOQ: 5 tons 20' container: 5-6 tons 40GP container: 10-11tons 40HQ container: 11-12 tons Advantage: super soft like cotton, good uniformity, hydrophilic, breathable, no smell, no stimulation to skin, Eco-friendly Application: mainly used for baby & adult diapers, sanitary napkins, pet pads, under pads, wet wipes etc. Quick Details Technics Spun bonded Basic weight 9-35gsm Tensile strength (MD) 12-35N/5 cm Tensile strength (CD) 3.5-12N/5 cm Elongation (MD) 15-70% Elongation (CD) 30-90% strike-through time
Sanitary Napkin Nonwovens Fabrics, PP Spun Bonded Non Woven Fabrics, SSS Non Woven Fabrics Manufacturer. REASONS TO CHOOSE NONWOVENS FOR SANITARY NAPKIN: . Super soft like cotton . Good uniformity . Hydrophilic or Hydrophobic . Breathable . No smell . No stimulation to skin . Eco-friendly PRODUCT SPECIFICATIONS: 1) Professional factory direct 2) Timely delivery; 3) QC team 4) No dust workshop, Automatic-packing, on-line monitor, barcode label; 5) SGS Certificate Products: SSS nonwoven fabrics for baby/adult diaper Raw material: 100% Polypropylene Technics : Spun bonded Basic Weight: 9~35g/m2 Color: white, blue, light yellow or others Width: 100--3200mm Roll diameter: within 1200mm Production Capacity: 1200tons/month Lead time: two weeks after getting deposit Payment term: 30% deposit, balance against copy of BL or L/C at sight Packaging: Rolling, inside paper core with ID 76mm, outside PE/shrink film MOQ: 5 tons 20' container: 5-6 tons 40GP container: 10-11tons 40HQ container: 11-12 tons Advantage: super soft like cotton, good uniformity, hydrophilic, breathable, no smell, no stimulation to skin, Eco-friendly Application: mainly used for baby & adult diapers, sanitary napkins, pet pads, under pads, wet wipes etc. Quick Details Technics Spun bonded Basic weight 9-35gsm Tensile strength (MD) 12-35N/5 cm Tensile strength (CD) 3.5-12N/5 cm Elongation (MD) 15-70% Elongation (CD) 30-90% strike-through time
Diaper Non Woven Fabric, Pet Pads Non Wovens Fabrics, Pet Pads Spunbond Non Woven Fabric Manufacturer. REASONS TO CHOOSE NONWOVENS FOR PET PADS: . Super soft like cotton . Good uniformity . Hydrophilic or Hydrophobic . Breathable . No smell . No stimulation to skin . Eco-friendly PRODUCT SPECIFICATIONS: 1) Professional factory direct 2) Timely delivery; 3) QC team 4) No dust workshop, Automatic-packing, on-line monitor, barcode label; 5) SGS Certificate Products: SSS nonwoven fabrics for baby/adult diaper Raw material: 100% Polypropylene Technics : Spun bonded Basic Weight: 9~35g/m2 Color: white, blue, light yellow or others Width: 100--3200mm Roll diameter: within 1200mm Production Capacity: 1200tons/month Lead time: two weeks after getting deposit Payment term: 30% deposit, balance against copy of BL or L/C at sight Packaging: Rolling, inside paper core with ID 76mm, outside PE/shrink film MOQ: 5 tons 20' container: 5-6 tons 40GP container: 10-11tons 40HQ container: 11-12 tons Advantage: super soft like cotton, good uniformity, hydrophilic, breathable, no smell, no stimulation to skin, Eco-friendly Application: mainly used for baby & adult diapers, sanitary napkins, pet pads, under pads, wet wipes etc. Quick Details Technics Spun bonded Basic weight 9-35gsm Tensile strength (MD) 12-35N/5 cm Tensile strength (CD) 3.5-12N/5 cm Elongation (MD) 15-70% Elongation (CD) 30-90% strike-through time
Ultima trading is engaged in the production, export and distribution of wood products and agricultural goods to European countries. Thanks to the quality of our products, well-established logistics and customer support from start to finish, we have taken a leading position as an exporter of heating products from Ukraine for 5 years, so more than 50 companies cooperate with us. Since 2017, our company has started privatization of the forsaken apple orchards in Ukraine to revive the Ukrainian fruit industry and create new jobs in rural areas. Indulge in the natural sweetness of Apple Charcoal! With its unique flavor infusion, easy lighting, and long-lasting burn, our charcoal brings a delightful twist to your grilling experience. Elevate your BBQ with Apple Charcoal and savor the mouthwatering aromas. Experience the taste sensation that will keep you coming back for more. Ignite the flavor, ignite the fun! Production capacity: 100 tons per month Price: 550 â?¬/ton Types of wood: Apple tree Characteristics: - Carbon (s-fix): 75%-85% - Humidity: 3%-8% - Ash content: 2%-5% - Volatile substances: 10-15% - Long burning time - Burns smoothly without smoke and sparks Granulation: - Standard: 20mm-80mm - Gastro: 40mm-120mm - Restaurant: 70mm-150mm - 20mm: goes to the production of charcoal briquette Advantages: - Low ash production - Flavorful aroma - Long burning time - High heat output - Natural and sustainable Packaging: - Paper bags from 1-15 kg - Polypropylene 11-14 kg -Carton boxes Branding: - Private label paper bags - Private label carton boxes Lead time: -Polypropylene bags: 10 days -Private label bags: 20 days Delivery info: - inland, by sea - door-to-door delivery - delivery terms: FCA, DAP, DDP, FOB, CFR, CIF Logistics info: Bulk: 14-16 tons Palletized: 8-15 tons *Check the loading scheme in the photos Write to us on telegram or whatsapp and get professional advice from our managers. Write to us on OLX, telegram or whatsapp and get professional advice from our managers. telegram: yk_yk7 facebook: Ultima Trading whatsapp: phone number Other products by Ultima: 1. Lump wood charcoal 2. Wood pellets 3. A1 EN Plus wood pellets 4. Pini Kay wood briquettes 5. Ruf wood briquettes 6. Firewood | nets 7. Firewood | crates 8. Fence posts 9. Nestro wood briquettes (heat logs) - Charcoal from apple trees, charcoal, charcoal, 1 ton of charcoal wholesale, charcoal, charcoal, charcoal to buy, charcoal price per ton, charcoal wholesale, charcoal from apple trees, apple tree charcoal, gastro charcoal, charcoal europe