Product description TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron 1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly. 2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape. 3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine. 4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position. Main Technical Model TC-650A Paper grams 200-1000g/m2 Work capacity 5000 pcs/h Blank length 150-560mm (5.91-22.04inch) Blank width 120-500mm (4.72-19.68inch) Film length 30-300mm (1.18-11.81inch) Film width 40-300mm (1.57-11.81inch) Film thickness 0.08-0.30 Main Motor power 7kw Weight 3000kg Machine size(LxWxH) 6500x1200x1600 mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
Product description TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron 1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly. 2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape. 3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine. 4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position. Main Technical Model TC-650A Paper grams 200-1000g/m2 Work capacity 5000 pcs/h Blank length 150-560mm (5.91-22.04inch) Blank width 120-500mm (4.72-19.68inch) Film length 30-300mm (1.18-11.81inch) Film width 40-300mm (1.57-11.81inch) Film thickness 0.08-0.30 Main Motor power 7kw Weight 3000kg Machine size(LxWxH) 6500x1200x1600 mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron 1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly. 2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape. 3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine. 4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position. Main Technical Model TC-650A Paper grams 200-1000g/m2 Work capacity 5000 pcs/h Blank length 150-560mm (5.91-22.04inch) Blank width 120-500mm (4.72-19.68inch) Film length 30-300mm (1.18-11.81inch) Film width 40-300mm (1.57-11.81inch) Film thickness 0.08-0.30 Main Motor power 7kw Weight 3000kg Machine size(LxWxH) 6500x1200x1600 mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron 1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly. 2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape. 3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine. 4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position. Main Technical Model TC-650A Paper grams 200-1000g/m2 Work capacity 5000 pcs/h Blank length 150-560mm (5.91-22.04inch) Blank width 120-500mm (4.72-19.68inch) Film length 30-300mm (1.18-11.81inch) Film width 40-300mm (1.57-11.81inch) Film thickness 0.08-0.30 Main Motor power 7kw Weight 3000kg Machine size(LxWxH) 6500x1200x1600 mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
HOT SALE Core competitiveness: High presion winding disc, especially the first segment. pursuit of the perfect product details. 1, Special designed structure for Let off- Great stress relieving 2.Most temperature control by induction heater-Stable and precise temperature 3. Constant pressure of the extruder head with Gear PUMP 0.png Benefits & Features Specifications Let-off device6station Size of bead13ã??ï½?20ã?? Section formSquare/hexagonal Number of plies3ï½?6layers Min. traction speed220m/min Joint overlapping0mmï½?100mm Form of collection for beadAutomatic Wire diameterï¿ 0.96/mmï¿ 1.2 mm/ï¿ 1.55mm(+0.01mm, -0.02mm) Company Information Who we are Delphy is a service provider specializing in the professional technology and equipment for the tire and conveyor belt industry.We are committed to excellence in offering new material, new technique and new quipment according to the well-chosen principle in discovering and developing sophisticated niche machines in the industry, nurturing " little giant " in the industry, fighting for being stable service provider for the top rubber product enterprises in the industry . At present, delphy has set up one design center and three manufacturing bases in China,namely Qingdao Rubber Construction Industrial Engineering Co., Ltd., Qingdao West Coast New District Universal Machinery Manufacturing Base, Jiangyin Niche Product Manufacturing Base and Inner Mongolia Extruder Series Product Manufacturing Base . Our customer The Southern Rubber Industry Joint Stock Company (Vietnam ), RIGID TYRE (Sri Lanka) and Shandong Haohua Tire.Thailand OTANI, DEESTONE tire automatic material conveying line and CENTURY company's whole line equipment upgrade and transformation,etc.
Product Feature: 1. Used for general investigation, geophysical exploration, high-way and building construction, and blast-hole drilling etc. 2. With hydro-automatic feeding device, and high drilling efficiency. 3. Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. 4. Close levers, convenient to operate, safe and reliable operations. 5. Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. 6. Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas. Product Parameter: Drilling depth 100/180 m Initial hole dia. 150mm Final hole dia. 75/46mm Drill rod dia. 42/43mm Angle range 90°-75° Dimensions(LÃ?WÃ?H) 1620Ã?970Ã?1560(mm) Weight(without power unit) 620kg Migration distance 350mm Swivel Head Spindle speed(5-speed) 1010/790/470/295/140r/min Spindle stroke 450mm Upward displacement speed of idling vertical spindle 0.05m/s Downward displacement speed of idling vertical spindle 0.067m/s Spindle pull-down max 15KN Spindle lifting capacity max 25KN Hoist Max .lifting capacity(single rope) 15KN Lifting rotating speed 121/76/36r/min Hoisting drum linear velocity (two levels) 0.166/0.331/0.733/1.465m/s Drum dia. 140mm Wire rope dia. 9.3mm Wire rope capability 35m Brake dia. 252mm Brake belt width 50mm Oil Pump Model YBC-12/80 Rated pressure 8Mpa Displacement 8ml/r Rated speed 1500r/min Power (diesel engine or motor) Model (diesel engine) S1100A2 Rated speed 2200r/min Rated power 10.3KW Model (motor) Y160M-4 Rated power 11KW Rated speed 1460r/min
Product Feature: 1.High efficiency and saving labor intensity .with hydraulic automatic feeding mechanism, improve the drilling efficiency, reduce labor intensity. 2.Safe and reliable.Using the ball cassette clamping device, and can down bar without stopping ,and it is convenient to operate. 3.Easy to operate.Equipped with a pressure gauge at the bottom for measuring pressure of the bore , easy to operate. Product Parameter: ST-100 Water Well Drilling Rig Machine Unity machine parameter Drilling depth 30--180m Drill rod caliber 50/ 42mm End hole caliber 75 /46mm Max. open hloe caliber 220mm Drilling angle 90°~75° Drill weight (No include power) 610kg Unity machine dimensions 2.10.91.3m Spindle spindle speed 130, 300, 480, 730, 830, 1045r/min Spindle stroke 450mm Hoist Max.single line hoisting capacity 1600kg Single line lifting speed 1.06, 0.67, 0.32m/s Wirerope caliber 13mm Wirerope cubic measure 35m Hug floodgate caliber 254mm Hug folldgate belt width 50mm Distance between drill and hole 230mm Mud pump Mud pump Type Horizontal single urn twin-action Displacement 170L/min Maximum pressure 1.5Mpa Work pressure 0.7Mpa Power Power Diesle engine S1105 18HP Electric motor Y160M-4 15KW
Features of XY-130 hydraulic core drilling rig ·Hoist installation holder, forming structure of double support wheel, can withstand strong impact. ·Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer. ·This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance required. ·Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission 2.Specifications of XY-130 hydraulic core drilling rig XY-130 hydraulic core drilling rig Drilling depth 130m Maximum open hole caliber 220mm End hole caliber 75mm Drill rod caliber 50mm Drilling angle 90 Drill weight (Not include power) 600kg Spindle Spindle speed 142 285 570r/min Spindle stroke 450mm Hoist Max.single line hoisting capacity 1600kg Single line lifting speed 0.41/0.82/1.64m/s Drum diameter 140mm Wire rope diameter 13mm Tightrope caliber 27m Mud pump Type Horizontal single urn twin-action Electric motor 95/77 l/min Maximum pressure 1.2mpa Work pressure 0.7mpa Water inlet caliber 30mm Water to exit caliber 20mm Triangle conveyer belt B1575mm Matched driving power (diesel engine and motor) 18hp diesel engine and 11kw motor
IntroductionFiberglass mesh is based on alkali or alkali-free glass fiber yarn as raw material,, woven into glass fiber mesh as the substrate, and then coated with acrylic copolymer solution made of a new type of alkali resistant products. Mainly applicable to cement, gypsum, walls, buildings and other structures inside and outside the surface enhancement, anti-cracking. It is the external wall insulation works of a new building materials.Technical parametersFiberglass mesh informationKey wordFiberglass MeshBrandLingyunApplicationExterior wall external insulationMaterialE-glassMesh size5x5mm ,4x5mm,4x4mmWeight80g- -300g/m2Roll length50m - 100m (OEM Aceeped)Roll width50mm, 80mm, 100mm (OEM Aceeped)ColourWhite, Green, Blue, Orange, Yellow, Red etc.MOQ50 RollFeatures 1, Good chemical stability:Anti-alkali, anti-acid, antiwater, resistant to cement erosion, and resistance to other chemical corrosion. And has a strong bond with resin , soluble in styrene and so on.2, High strength, high modulus, light weight.3, The size of good stability, stiffness, formation, not easy to shrink deformation, good positioning.4, Good toughness. Shock resistance is better.5, Anti-mildew, pest .6, Fire, insulation, noise, insulationApplication 1) wall reinforcing material (such as fiberglass wall mesh, GRC wall panel, EPS internal wall insulation board, gypsum board, etc.2) enhance cement products (such as Roman Columns, flue, etc.).3) granite, Mosaic net, marble back net.4) waterproof rolling material cloth and asphalt roofing waterproof.5) strengthen the skeleton material of plastic and rubber products.6) fire prevention board.7) grinding wheel base cloth.8) earthwork grille for road surface.9) building and seaming belts and so on.Inspection show for your referenceCompany InformationYantai Lingyun Glass Fiber Products Co., Ltd. was established in 1998. It is a large-scale enterprise specializing in alkali-resistant mesh cloth production in Jiaodong. The company has 100 rapier looms, 5 alkali-resistant coating machines, 2 emulsion production lines, and an annual output of 30 million square meters of Lingyun brand meshCertification
IntroductionFiberglass mesh is based on alkali or alkali-free glass fiber yarn as raw material,, woven into glass fiber mesh as the substrate, and then coated with acrylic copolymer solution made of a new type of alkali resistant products. Mainly applicable to cement, gypsum, walls, buildings and other structures inside and outside the surface enhancement, anti-cracking. It is the external wall insulation works of a new building materials.Technical parametersFiberglass mesh informationKey wordFiberglass MeshBrandLingyunApplicationExterior wall external insulationMaterialE-glassMesh size5x5mm ,4x5mm,4x4mmWeight80g- -300g/m2Roll length50m - 100m (OEM Aceeped)Roll width50mm, 80mm, 100mm (OEM Aceeped)ColourWhite, Green, Blue, Orange, Yellow, Red etc.MOQ50 RollFeatures 1, Good chemical stability:Anti-alkali, anti-acid, antiwater, resistant to cement erosion, and resistance to other chemical corrosion. And has a strong bond with resin , soluble in styrene and so on.2, High strength, high modulus, light weight.3, The size of good stability, stiffness, formation, not easy to shrink deformation, good positioning.4, Good toughness. Shock resistance is better.5, Anti-mildew, pest .6, Fire, insulation, noise, insulationApplication 1) wall reinforcing material (such as fiberglass wall mesh, GRC wall panel, EPS internal wall insulation board, gypsum board, etc.2) enhance cement products (such as Roman Columns, flue, etc.).3) granite, Mosaic net, marble back net.4) waterproof rolling material cloth and asphalt roofing waterproof.5) strengthen the skeleton material of plastic and rubber products.6) fire prevention board.7) grinding wheel base cloth.8) earthwork grille for road surface.9) building and seaming belts and so on.Inspection show for your referenceCompany InformationYantai Lingyun Glass Fiber Products Co., Ltd. was established in 1998. It is a large-scale enterprise specializing in alkali-resistant mesh cloth production in Jiaodong. The company has 100 rapier looms, 5 alkali-resistant coating machines, 2 emulsion production lines, and an annual output of 30 million square meters of Lingyun brand meshCertification
Turntable bearing slewing ring bearing with without gear RKS.060.25.1534 Specifications for RKS.060.20.1534 slewing bearing, slewing ring bearing, ring bearing, roller bearings 1. Type: Four point contact slewing bearing 2. Material: 42CrMo, 3. Precision: P0. P6. P5. 4. Bore diameter: 1587mm 5. Outside diameter:1619mm 6. Height: 56mm 7. Cage/retainer: Nylon 8. Gear type: Without gear 9. N. W. 154kg HGB production capacity of 40,000 sets, covers an area of 20 000 square meters,with 200 employees.Products are widely used in new energy, medical, recreation, automation, lifting, construction, mining, metallurgy, port, textile, shipping, environmental protection, aerospace, wind power and other fields. The company's products are sold all over the country and exported to Europe, America, Asia and other countries and regions, and have won the approval and recognition of the  vast number of users. Processing of size range: 100 - 9800mm Material:42CrMo4V,42CrMo,42CrMo4  Why choose HGB? Product Description Slewing bearing Rolling Body: Roller Bearings Separation: No The Number of Rows: Single-row, double-row, triple -row, Multi-column Outer Dimension: 100-9800mm Load Direction: Axial Material: 50mn, 42CrMo HGB Packaging Details: 1. Bearing surface is covered with the anti-rust oil first; And then wrapped with the plastic film; 2. And then packed with Kraft paper and professional belts; 3. At last, with wooden box totally at the outer packing to in void the rust or the moist; 4. Packaging can be done according to customer's requirements.
Chicken manure dryer is suitable to be used in large, medium and small-sized chicken house and the areas where the breeding industry is developed. This kind of rotary dryer is designed for high moisture material, such as more than 65% moisture. The same as Chicken manure, cow manure or pig manure. This dryer is different from other normal dryer, there is a inner mixing shaft to mix plup to better drying. And this type dryer is not very long, it is shorter than normal dryer. This can save your area, and the Drying efficiency is very high. The plup will be in dryer 30-50 mins more or less. You can adjust the speed. As normal, the drying working time is 24hours , our smallest model the output capacity is 0.5 t/h, the largest one is 20 t/h. And the outlet moisture is less than 15%. The manure dryer include shell, lifting blade, mixing shaft, frequency conversion motor, reducer, gear ring, roller ring and overall support. So it is the whole plant to drying manure. It is suitable for high moisture material. You can use coal, natural gas, oil, biomass pellet to be fuel for this manure dryer. You should build a burning room to adjust hot air temperature. Normal temperature is 450-550C. A. Dewaterer. The raw manure moisture is more than 70%, before drying, you need this dewaterer to reduce the water content to be . This can save the fuel consumption, and Improve the efficiency of drying. B. Transfer system: belt conveyor or screw conveyor. We suggest use screw conveyor for this manure, it can mix manure before feeding. C. Dust catcher system: As normal you can use cyclone catcher, and we also suggest to use wet-filter to Reduce odor. D. Burning system,hot air room. The fire can not be in dryer directly, so you should build a hot air room with refractory bricks, then use fan blower to waft hot air to dryer. Related product:Chicken Manure Dryer
Winding Battery Online X-ray Inspection Equipment XG5200 X-ray machines Usage Lithium Battery X-ray Inspection Equipment XG5200 is mainly applied for the battery industry. X-ray penetrate through the inner of the battery with X-ray transmission principle. The machine automatic measure the alignment of the positive and the negative of the winding battery,and sorting the OK/NG products, intelligent match the AB model according to the a standard at the same time . OK products are transported into the next manufacture process by the belt  . Features 1.Automatic detection Automatic detection and sorting OK/NG product. 2.The database modeling Customers can freely modeling models as many as 60 according to the testing standard.Automatic switching by reading bar code or QR code . 3. Real-time monitoring All actions ,signal,and the state of the hardware are real-time monitored and displayed on the software interface . 4.Intelligent matching battery Software automatic determine the A or B type batteries, match the AB model together into the next manufacturing process. 5.Images and data online displaying. In order to convenience of observation and recognition,data and images of many parts of the same battery test are shown in the same software interface. 6.Safety and environmental protection The whole equipment with good protective function, all part of the fuselage surface radiation meet safety standards. Parameters X-ray Tube Tube Voltage MAX 110KV Tube Current MAX 450uA Focal Spot Size 5μm Cooling Mode Strong wind cooling Image-forming  System Field of View Range 4"/6" Resolution 80lp/cm X-CCD Resolution 1024*1024pixels Detection Precision Repeat accuracy 60μm Efficiency Detection Efficiency �12ppm False Rate �2% Missing Rate 0.0% Qualified Products Rate �99.5% Safety Standard International Radiation Safety Standards �1usv/hr
ITEM : HastelloyC22 welded tube pipe price per kg Brand: BAOGU Material : Hastellory: HastelloryC22,HastelloryC276,Hastellory X,Hastellory B2,HastelloryB-3,HastelloryG-30,Hastellory C,HastelloryB,Hastellory C-4 Others:2205,2507,2906,330,331,660,630,631,174ph,177ph, S318039,904L,etc Incoloy:Incoloy 800,Incoloy800H,Incoloy800HT,Incoloy 825,Incoloy 925,Incoloy 926,Incoloy 901,Incoloy 330 Inconel: Inconel 600,Inconel 601,Inconel 625,Inconel 690,Inconel 718,Inconel 600 x-75,Inconel 725 Nimonic: Nimonic80A,Nimonic75,Nimonic90,Nimonic80 Duplex stainless steel:S22053,S25073,S22253,S31260,S31803,S31500,S32205,S32304 Special Stainless Steel:904L,347/347H,317/317L,316Ti,254Mo Standard : GB, AISI, ASTM, ASME, EN, BS, DIN, JIS Surface : bright,matt ,electrolysis bright, matt, downy, mesh,belt,bright fnished Application : petrochemical engineering projects/wate Package : With woven bag, wooden case or according to client' requirement Thickness : 0.11mm to 16mm Diameter : 0.3mm-600mm Lead Time : 40 days after deposit Company : Wuxi Baogu Steel Co.,Ltd Wuxi Baogu Steel Co.,Ltd No.29 Furong Road,Wuxi City,Jiangsu province,China TEl: +8621 60491701 60491702 Whatsapp/wechat:+8613146413570 Skype:baogusteel8010 Email:8010@baogusteel.com Website:www.baogusteel.com
The best mining flotation equipment for ore extracting gold flotation machine SF Gold processing machine flotation machine is self-prime air&puple,tank is frontloaded,good for bubble returning;It has double blades impeller,has good mixing low consumption;horizontal placement,no need bubble pump;Imoellers have slow rotation speed,Impeller cover has durable life;The pump is double cycling in fixed form of up & down,which is good for coarse ore to suspended.The impeller is rotated by V-belt of motor and produces negative pressure by centrifugal function. Enough air is sucked to mix slurry, and slurry mixes drug at the same time. Mineral sticks on bubble completely and floats on the surface of slurry to form mineralized bubble. Useful bubble is scraped out by adjusting flashboard height and controlling liquid surface,One or more gas chambers are installed in the bottom of the tub, on the cover of the gas chamber are full of one-way valves. when the one-way valves are open, the pressed air will be fed into the flotation cell. Advantages: 1) Large air-absorption capacity 2) Less reagents consumption. 3) Low energy consumption. 4) Easy to maintenance and can be designed according to the users. 5) Increase concentrate grade of by 4-6%. 6) Increase cycling rate by 8%. 7) Increase production by 12%. Jiangxi Victor International Mining Equipment Co.,Ltd Tel./Fax: 86-797-5712751 Mob.:18603010633 Wechat/WhatApp: +86 13361779085 Skype: uphone139 Web.: www.miningshakingtable.com Add.: Guzhang industrial park, Shicheng, Ganzhou, Jiangxi, China.
ERW219 H.F. Straight Welded Pipe Production Line ERW219 high frequency longitudinal welded pipe production line / pipe making machine / tube mill is designed to produce welded pipes of 89mm-219mm in OD and 2.0mm-8.0mm in wall thickness, as well as corresponding square and rectangular pipe. Products: architectural structure tubes, low-pressure liquid tubes, coal transmission belt tubes, drive shaft tubes, guardrail tubes, tower footing tubes, automobile beam steel tube and other products. Equipment advantages ZTF forming process save roller up to 60% With direct square forming technology, one set of roller can produce all pipe sizes Electric control and automatic adjustment, high precision,high roller change speed Basic Technical Inform ation of Welded Pipe Production Line Product&yield Round Pipe 89mm-219mm Thickness:2.0mm-8.0mm Square & rectangle tube 70mm70mm -170mm170mm Thickness:2.0mm-6.0mm Length 6m-12m Length Tolerance: �3mm Production Speed 20-50 m/min Production capacity 35,000ton/year Consumption Mill installed capacity 280 kw Line Area 100m(length) 9m (width) worker 6-8 workers Raw Material Carbon Steel coil Carbon steel coil Q235B(ASTM GR·D,�?s 230) Width 280mm-690mm Thickness: 2.0mm-8.0mm Coil ID 600-800mm Coil OD Max 2000mm Coil Weight 8.0t
Single Shaft Shredder Introduction: Single shaft shredder is available to recycle wide range of material.It is an ideal machine for plastic, paper, wood, fiber, rubber, organic waste a wide variety of non-metallic materials. As per our customerâ??s requirements, such as the input size of materials. Capacity and the final output size etc. We could work out a suitable proposal for our clients. After being shredder by the machine, the output material could be used directly or go int to the next step of size reduction. With the function of Siemens microcomputer control system, it is possible to control automatically start, stop. Automatic reverse sensors to protect the machine against over loading and jamming. The output capability typically range between 300kg/hr â??5,000kg/hr+ depending on the different model and different materials. For thick wall diameter plastic pipes, plastic film, waste injection products, plastic bottles, bags Compact Single shaft shredder combined with great power. Variable adjustable screens to determine the size of the chips Hydraulic feed to ensure constant material flow to the rotor V-belt drive gear reduction through spur gearing Hydraulic unit and hydraulic cylinder suspended by cardanic joints in small or medium-sized companies which attach great importance to an optimum cost -benefit ratio. Our service: (1) Your inquiry related to our products or prices will be replied in 24hours. (2) Our engineer will make machine placement chart according to clientâ??s workshop chart (3) We provide 12 months guarantee since the date of bill of loading. All products are passed strict test.
Paper folder gluer machine Folder gluer machine Paper folder gluer machine Speed 220m/min Paper 200-800g/m2, flute B,C,E,F Feeding way Automatically and continuously feeding Adhesive Solute type Power AC380V,7KW Weight 2200kg Overall size 750016501300mm The scope of count 0-999999 Model UG2-1400B UG2-1600B A MAX 1200mm 1200mm A MIIN 150mm 150mm B MAX 1020mm 1200mm B MIN 160mm 160mm C MIN 12mm 12mm D MIN 100mm 100mm F MIN 81mm 81mm Automatic gluing and folding machine and it consist of vacuum adsorption feeding part, gluing and folding part and stacking and counter part. It adopts frequency to change speed and controlled by standard PLC touch screen, easy operation and reliable. High speed and energy-saving and save labor. It is suitable for the paper, corrugated paperboard with 3,5 layer. With the expansion of business scope,Shandong RiNo International Trade Co., Ltd quickly moves forward to the world and becomes an export-oriented company that integrates production and trade, includes paper packaging products, corrugated packaging machinery equipment, packaging product manufacturing equipment & consumables such as Corrugated Cardboard Machine, Printing Machine, Folder Gluer Machine, Automatic Die-cutting machine, Iron Wire and many other products,providing a full range of services from product to technical support. Feature: 1.The machine is adopted with strengthened with single-side driving system, for steady running and easy maintenance. 2.The motor is adopted with infinitely variable speed drive and power saving. 3.It is adopted double face tooth rod adjusting in operation, with upper and lower linkage which can adjust in palace, precise and rapid. 4.Delivery is adopted with several thick belts cooperation with shaking motor to ensure its continuous, exact and automatic feeding. 5.It is adopted two side of the high-speed grinding equipment, which makes the glue more stable, firmly and glued. 6.The machine is suitable for unilateral paper box. And the special design is also available.
Years of R&D and production experience;including the lastest cutting &milling technology;various kinds of crossbeam width adn travel distance . With the help of high-power spindle and X/Y/Z servo motor ,Doubke Column Machining Center ca be used in automobile mold ,olastic mold and other high-precision parts processing industr. X/Y/Z Axis roller tpe slider for higher loading capacity ,higher position accuracy &repeated position accuracy and rigidity. Component 90° spindle: 5-face maching Gerbox :High torque spindle motor (6000RPM)with two different speed gearbox for low -speed heavy cutting and high-speed finishing cutting .. Gear-type -spindle :International brand long-nose spindle (600rpm)for high-speed and low -speed cutting. International brand balance weight oil gydraulic system Step-type beam Planetary Gear:X axis transmissio system :international brand high precision planetary gearbox for excellent rigidity and accuracy when moving. Technical characteristics : FC-300 iron casting body with special treatment for stress relieving ,no deforamtion after long-term working . Crossbeam with high rigidity ,stability and precision :Slope and Multiple-level Design,Bix -type casting and integrated rib structure . One-piece casting for headstock ;X/Y/Z Axis with high torque servo motor and direct transmission to improve processing efficiency and reliability. High horsepower spindle motor (6000rpm) with two different speed gearbox for low-speed heavy cutting and high-speed finishing cutting .. X axis transmission system :high-precision planetary gearbox structure ;to avoid the belt transmission torque loss Spindle ,bearing and gearbox use forced cooling system to reduce the heat deformation adn improve the life span and precision of the spare parts.
Introduction of WZ30-18 Excavators Backhoe Loaders 1, WZ30-18 Excavators Backhoe Loaders adopt increased cab with security glass, bright and spacious. 2, Operation table: easy to check water temperature, oil temperature, current, 3, Adopts famous brand hydraulic part, dual pump converging power; excavating, loading hydraulic power for each other. 4, Adopts suspension shock absorber-360 � rotate seat, with seat belts, and improve driver comfort and safety. 5, Hinge type front and rear frames, small turning radius, full hydraulic steering, easy and convenient operation. Part 6, mining-led operation, light manipulation, positioning accuracy. 7, Fully equipped with all the features of small excavators and loaders. 8, Equipped with a variety of options to meet the needs of different users. 9, Reset the tap unit and the wings legs, broken rock, and when you dig deeper than other forms of mining equipment with greater stability. Parameters: Operating weight 4800kg Capacity of bucket 0.3m3 System working pressure 20mpa Engine 4102 Rated power 51kw Rated speed 2400r/min Max. excavating height 5000mm Max. excavating depth 3600mm Max. excavating radius 5000mm Max. excavating Width 550mm Capacity of bucket 1.0 m3 Rated load 1800kg Dumping height 3600mm Dumping reach 950mm Min. turning radius 4300mm Max. flux 50ml/r Max. Tractive force 38KN Max. breakout force 49KN Max. digging force 44KN Grade ability 45% Max. traveling speed(forward, backward) �25km/h, 25km/h Ground clearance 220mm Wheel base 2290mm Tread 1500mm Drive type 4WD Tyre 20.5/70-16 Size(L*W*H) 6900mm*2080mm*2900mm
