Ubest three ply shuttering panel: Glue: muf glue Material: fir Packing: in pallet prepared for forklift. Thickness: 27mm, 21mm, Width: 500mm Length: 970, 1000, 1500, 1970, 2000, 2500, 3000, 4000, 5000, 6000mm. Tolerance on length and width (mm: -/+3); +/-0.5 Moisture content: less than 10% Abrasive: less than 0.1g/100r Elasticity: more than 5500mpa Static bend: more than 28mpa Thickness swelling (72 hours in water): less than 6% Density: 425kgs/m3 H.S code: 44129499.90 Depending to the quantity and thickness and size
Our PU Wall Panels are made from 100% Polyurethane, give you quiet and warmth. We are one of the most professional PU wall panels manufacturers! Our PU emulational wall panels can be used to decorate interior and exterior walls. It has many advantages as following: 1)Environmental Friendly:No CFC and formaldehyde etc substance, low VOC. 2)DIY Installation:light weight and easy to carry; you can look on it as wood to process, very low installation cost. 3)Fire-proof, water-proof, anti-moth, no mildew, anticorrosion, earthquake resistant. 4)Aging resistant, UV resistant, heat insulation,electricity insulated,sound insulation and good weatherability. You can look on it as wood, you can use usual wood work machine and glue and screw etc. This kind wall panel can be designed to be similar with ceramic tile, stones, marbles etc appearances. We can design and produce PU products according to your samples!. Carton etc.
Our PU Wall Panels are made from 100% Polyurethane, give you quiet and warmth. We are one of the most professional PU wall panels manufacturers! Our PU emulational wall panels can be used to decorate interior and exterior walls. It has many advantages as following: 1)Environmental Friendly:No CFC and formaldehyde etc substance, low VOC. 2)DIY Installation:light weight and easy to carry; you can look on it as wood to process, very low installation cost. 3)Fire-proof, water-proof, anti-moth, no mildew, anticorrosion, earthquake resistant. 4)Aging resistant, UV resistant, heat insulation,electricity insulated,sound insulation and good weatherability. You can look on it as wood, you can use usual wood work machine and glue and screw etc. This kind wall panel can be designed to be similar with ceramic tile, stones, marbles etc appearances. We can design and produce PU products according to your samples!. Cartons etc.
Breakfast bar: 4100 x 650 x 40mm Splashbacks: 3030 x 1210 x 6mm Upstand: 3000 x 100 x 20mm Packing: a strong shrink wrap, corners reinforced, very safe packaging.
6mm, 10mm, .....
6mm.10mm....
Marble & aluminum honeycomb composite panel consisting of the natural marble stone face (approximately 3~5mm) and the aluminum honeycomb panel together . With words advanced technology of gluing and adhesion used in the aviation , the marble & aluminum honeycomb composite panel preserved the natural appearance of the marble stone , has overcome the fragility and heavy weight of the entire marble stone . Nowadays this green material has become more and more popular in the decoration field in the world . Wooden case
3 Layer Shuttering Panel Wood: Chinese Fir Structure: Three crosswise glued layers Thickness: 27mm 21mm Width: 500mm Length: 970, 1000, 1500, 1970, 2000, 2500, 3000mm Glue: Water-repellent of melamine or WBP glue Packing: package prepared for loading with a forklift Number of layers : three layers Process of edges: waterproof of paint pallet
Three Layer Shuttering Panel Wood: Chinese Fir Structure: Three crosswise glued layers Thickness: 27mm 21mm Width: 500mm Length: 970, 1000, 1500, 1970, 2000, 2500, 3000mm Glue: Water-repellent of melamine or WBP glue Packing: package prepared for loading with a forklift Number of layers : three layers Process of edges: waterproof of paint pallet
Three ply shuttering panels For construction use, the function is the same as film faced plywood, in various countries, constructions adopt alternative film faced plywood, shuttering plywood, or 3 ply shuttering panels. Thickness: 27mm (3 x 9mm), 21mm Size: 970 x 500 mm, 1000 x 500 mm, 1500 x 500 mm, 1970 x 500 mm, 2000 x 500 mm, 2500 x 500 mm, 3000 x 500 mm, 3500 x 500 mm. Glue: wbp (muf) / e1 Sanding: double faced sanded and coated Material: china fir Density: 13.0kg/m2 Moisture content:
Horizontal bamboo panel * structure: multilayers of horizontal bamboo * thickness: 10 / 15 / 20 / 25 / 30 / 35 / 40 / 45 mm * color: natural / carbonate / dark brown * finishing: unfinished / uv / pu / oil * square, straight / round edge 2400/1200 x 1200 x 10 / 15 / 20 / 25 / 30 / 35 / 40 / 45 mm
Product: Beech and oak glued edge panels û finger joined, humidity 8+2%, sanding 120 grit, glue D3, width of one lamella 36-45, quality A/A, A/B, A/C, B/B, B/C, C/C Quality:A û side:common standard colour matching, heartwood and sapwood is not allowed, occasionally small healthy eyeknots are allowed. B û side:discoloration and healthy heartwood and sapwood is allowed, small healthy knots are allowed C - side:discoloration and healthy heartwood and black heartwood, sapwood is allowed without limitation, small knots are allowed Dimensions:thickness:from 18 mm up to 55 mm Width:up to 1240 mm Length:up to 6000 mm Packing:according customers requirement Advantages:fixed high quality standard short delivery terms tradition and know-how in wood production strategic location in the middle of Europe wide dimension scale flexibility and customers service 400 x 650 x 4000 mm, 10 pcs., 1,04 m3, 725 Kg
Ply shuttering panel Characteristics: Wood: china fir Colour:yellow Structure: three crosswise glued layers With a perimetrical frame in the middle layer Maintenance: shuttering panels need to be coated by shuttering oil Before each application in order to ease depaneling and Prolong the application of panels Structure Shuttering boards are manufactured of three adhesive-bonded layers of Wood (chinese fir) the exterior layer consists of four side-bonded lamellas (which may also be glued one behind the other) running in the direction Of the panel while the intermediate layer is made of transverse strips of Wood, framed by longitude and front cover strips Surface Protection by melamin resin (does not glue to concrete) Edges are protected by acrylic facade paint Thickness*: 27 mm(9*9*9) Width*: 500 mm 1000mm Length: 970, 1000, 1500, 2000, 2500 and 3000 mm We will wait for your question Packing*: package prepared for loading with a forklift
Finger joint panel First of all we would like to introduce ourselves, we are one of the biggest manufacturers, specializing in wooden flooring and wooden panel in Vietnam. Our products are now mainly exported to Japan, Taiwan, Korea... We would like to make a good business with you by offering our products such as floorings, decking, decking tile and wooden panel are made from Laos pine, Vietnam Pine, Acacia, Pyinkado, Pomu ( Hinoki), Takkyan ( Asian Walnut ), Narra Padauk, Oak, Beech, ...with wide range of products from Solid flooring, Finger joint (UNI) flooring, Finger Joint Laminate flooring(FJL), Bangkirai decking, Acacia decking tile and Vietnam Pine Finger Joint Panel, window, door Jamb ( scantling), engineered wood flooring. 1.Wooden flooring: Size: 14/15/18 mm x 90/120/150 mm x 300/450/600/750/900/1050/1200/1500/1820mm A - Grade: The face shall be practically free of defects- no sap wood/ no heart wood/ no blue stain/ and no crack. A grade admits some small healthy knots with a max. diameter of 5.4 mm, with an allowance of 2 knots every running meter for 90mm wide and below. 3 knots are allowed for 120 mm wide and above. Uniform of color with small limited character marks. B v Grade : The face may contain small streaks, burls, slight imperfections, black lines, black colored knots and tight knots which do not exceed 2.45mm, with an allowance of 4 knots every running meter for 90mm wide and below. 6 knots are allowed for 120 mm wide and above. Knots should be repaired. In principle free of sapwood. . More color variation allowed within the parcel. C v Grade : The face may contain sapwood, big streaks, burls, imperfections, and knots which do not exceed 3.54mm in diameter. No pin worm hole is allowed. C- grade allows colored repaired knots. Sapwood is allowed for max. 30% of the width and 30% of the height. Sapwood should be repaired. The quality of ABC Grade: KD: 12% Less than 2 mm bending over 1000mm running meter Cupping is not allowed. Tolerance on length: +/- 1 mm Tolerance on thickness: +/- 0.1mm ( 15 thick and less), +/- 0.2mm ( 18 thick and less ) Wood species: Pyinkado, Narra Padauk, Takkyan, Hinoki, Oak, Laos Pine Packing: Nylon, Carton and Pallet 2.Acacia decking tile Size: 24x500x500 mm ( T x W x L) Size of Lamella : 12x50x500 mm ( T x W x L) Structure : Acacia decking tile is made from 9 surfaced lamellas and 3 bottom lamellas and are matched to each other with glue, screws and nails. 8-12% kiln dried Quality: 1.Surface quality: - A side is the front v view of the product. B side is the side view of the product. C side is the bottom side view of the product. - Sapwood is not allowed on the A and B side . - Diameter of dead knots on the side A and B is not exceeded 10mm. Dead knot on C side is not over 25 mm. - All dead knots are fill out with pasta ( wood flour mixed with glued ), same color with product¦s color. - No rotten, decay, blue stain, no bowing. Processing quality: - Allowed tolerance for lamellas in width and thickness: +/-0.1mm. - Product¦s surface must be treated with sandpaper, to be clean and clear and polished with oil. - All lamellas must be bevel v edge with radius of 2 mm. Packing: Nylon, Carton and Pallet 3.Decking Size: 20/30x105x2700/3000mm Grade A. One side free of defect. No crack, no cupping, no knot, no blue stain, no sapwood, no pinhole. One face grooves for non slip protection, Pencil round chamfer the long corner. KD : 25% Wood species: Bangkirai ( Yellow Balau ), Laos Pine Packing: Nylon, Carton and Pallet 4.Pine Finger Joint Panel Size: 18/24/33/36/38x300/610/915/1220x2300/2440/3640/4200 KD: 12% Grade A: No crack, no pinhole, no blue stain, no knot, lamella width 45mm Grade B, C: No crack, no pin hole, blue stain are allowed, knot allowed to be repaired. Wood species: Vietnam Pine, Acacia, Pomu Packing: Nylon, Carton and Pallet 5. Window scantling ( 3 layers ) Size : 72mm x 86mm x 5900/6000mm KD : 12% Grade A : No crack, no pinhole, no blue stain, no knot, lamella width 45mm Grade B, C : No crack, no pinhole, blue stain are allowed, knot allowed to be repaired, lamella width 40-45 mm Wood species : Vietnam Pine, Acacia, Pomu Packing: Nylon, Carton and Pallet Packing: Nylon, Carton and Pallet
Transparent character Fashionable glass-ceramic has the double characteristics of glass and ceramic, which is of sparkling and natural stone texture.It is different from ordinary board which only has the crystal structure on the surface.The transparent crystal structure reflects its noble quality. Rich color Glass-ceramic overcomes the shortcomings of natural stone which has the slight crackle, for it is fired on high-temperature twice, the products are of rich color and soft glossiness, just like jewel and jasper which has charming splendor, and you can also match them freely. Zero water absorption, easy to clear Glass-ceramic has zero water absorption, can avoid destroy of freezing, concrete and grey pollutions.The smudge on the surface can be cleared easily. Green environmental construction material For its re-crystallization of glass , glass-ceramics nearly has no radioactivity and pollution to environment Great intensity, light and handy Glass-ceramic is harder than natural stone, it can be adjusted the thickness to match construction method, accord with the light and hard decoration trend. Excellent ability of bearing climate and enduring Glass-ceramic is a inorganic material with excellent chemistry stability, well than granite and marble on acid and alkali resisting.There is no appearance of going bad, color fading reducing intensity though expose in air, wind and rain. Product specification: 900mmf-1800mm 1000mmf-2000mm 1200mmf-1800mm 1200mmf-2400mm Thick tile :18mm-20mm thin tile :12mm-14mm Please contact us if you want nonstandard panels
Polycarbonate sun panel Characteristics of polycarbonate sun sheet. Good light transmission. Against aging, discolor and atomization. Weather resistance. The co-extruded uv coating on the surface of the sheets can protect from the damage of ultraviolet. Impact resistance. Pc solid sheets is - times harder than ordinary glass, - times than pmma. Fire retardant. Passed china national gb - test, b level fire retardant. Cause no fire drop, nor poisonous gas. Temperature resistance. Temperature from - f to f cause no damage to its quality. Light weight. It is easy to transport, install, can cold bent directly and has good performance of heat forming. Sound insulation. With good sound & heat insulation characteristics, it is first choice materials for insulation wall in free ways, expressway, greenhouse. Application of pc sheet and sun panel. Singular decoration in gardens and recreational places, corridors and pavilions in leisure places. Interior and exterior decorations of commercial building, curtain walls of modern buildings. It is applicable for transparent airline containers, front wind shields of motorcycles, airplanes, trains, liners, vehicles, boats, submarines, police glass shield, telephone booth, advertising boards and light box. It can be used in instrument, meters and military industry. High class indoors decoration such as walls, roofs and screens. Can be used as sound-insulation walls in expressways and city's overhead highways. Can be used in greenhouses and raising sheds. Suitable for long-distance seaworthy transportation
Master panel wall Net Coverage Width: 850mm. Thickness: 45mm. / 60mm.
Aluminium honeycomb panel Comes in alu-alu with 6 mm, 10 mm, 12mm, 16mm, 20mm, 25mm, 32mm etc or with alu-frp with alucore, frp/alucore/frp, alu/alucore/plywood, alu/alucore/laminate etc in sizes up to generally 4ft width and 8 ft length. Could be made in any shape as well as fixed with any other material
Product suitable for furniture industry, countertops, table tops, stair treads, flooring planks.
The Elite profile was designed to portray the look of Dutch clay tile. The wavy contour creates a uniquely European feel. It catches the light and strikingly draws your attention. It's perfect for a home or cottage. We specialize in metal roofing for commercial and residential use. We understand the importance of finding the perfect solution for your needs. Our metal roofs and wall panels and custom flashing are designed to withstand harsh weather while providing long-lasting durability. Our team is ready to assist you and help you find the best solution for your project. Trust us to provide you with the best roofing solutions in the industry. The Advantage of Elite Roofing 1.Excellent durability and waterproof High-quality aluminum zinc plated steel sheet and natural stone chip coating with acrylic resin glue make stone coated roof tile to superior corrosion resistance and waterproof. The warranty could be last up to 50 years. 2.Lightweight and easy to install The weight of stone coated metal roof tile is only 1/6 of the traditional tile, only 5.20-6.40kgs/sq.m.It is easy to transport, store and install. 3.Economic Because it is lightweight but big size, so it usually just takes 3-5days for 2 workers to finish all the installation for a common residence and related charge of shipment and installation be reduced sharply. 4.Noise reduction and heat insulation The stone chips could reduce the noise when raining or hailing, it also could insulate from heat when exposing to extremely UV and keep warm in Winter.