Guaranteed Values Total Moisture % - 8.0 Proximate Analysis (Dry Basis) Ash % - 12.0 Max Volatile Matter % - 1.7 Max Fixed Carbon % - 86 Min Chemical Analysis (As Received) Sulfur % - 0.75 Max Phosphorous % -0.005 - Price To Be Determined - Fob Basis Colombia Port - Irrevocable Lc As Per Our Requirements - Quantity Minimum 35,000 Mt
Pricing will depend on quantity. We have 140,000,000 MT ready to ship. Specs are below. Proximate Analysis (As-Received) Moisture: 10% Ash: 10% Volatile Matter: 39.2% Fixed Carbon: 40.8% BTU/lb: 11,400 Gross Kcal/Kg ISO: 6,040 Sulfur: 0.58% SO2/mm BTU: 1.00 Ultimate Analysis (As-Received) Moisture: 10% Carbon: 63% Hydrogen: 4.6% Nitrogen: 1.2% Chlorine: 0.02% Sulfur: 0.58% Ash: 10% Oxygen: 10.6%
GUARANTEED VALUES Total Moisture 7.0% Proximate Analysis (Dry Basis) Ash % 7.0 max Volatile Matter% - 32/35 Fixed Carbon % 58 min Chemical Analysis (As Received) Calorific Value BTU/LB - 12,800 Sulfur % - 0.8 max FSI % - 7.5 max Phosphorous % - 0.004 PRICE TO BE DETERMINED MINIMUM MONTHLY QUANTITY 40,000 MT
VHB pot bearing made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268:2014, AASHTO LRFD: 2007, Section 18, ASTM D521203, BS5400, EN1337, KS4420). VHB pot bearing is capable of withstanding high loads, displacements and wide angle rotation. This type of bearing is suitable for middle-range span structure, continuous bridge structure etc. with a load capacity of 60000kN or above depending on projects requirements. VHB pot bearing has well-shaped structure, superior design, which is convenient for installation and maintenance during operation PRODUCT CHARACTERISTICS VHB pot bearing is comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under thepressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along horizontal axis. Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding bar can be designed to limit or allow the movements as required from the structures. Pot bearing is divided into 2 main types: Fixed pot bearing and sliding pot bearing. Fixed pot bearing: The bearing only allows the head of structure to have rotary movement and transfers the pressure through a fixed point. Sliding pot bearing: This type of bearing, including free sliding bearing and guided sliding bearing, allows the head to have both rotary movements and transversally or multidirectional movements. To ensure the long-life durability, VHB pot bearing is protected against corrosion by the following methods: two-component epoxy coat, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al â?? Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117 standards.
1. PRODUCT OVERVIEW VHB pot bearing made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268:2014, AASHTO LRFD: 2007, Section 18, ASTM D5212â??03, BS5400, EN1337, KS4420). VHB pot bearing is capable of withstanding high loads, displacements and wide angle rotation. This type of bearing is suitable for middle-range span structure, continuous bridge structure etc. with a load capacity of 60000kN or above depending on projects requirements. VHB pot bearing has well-shaped structure, superior design, which is convenient for installation and maintenance during operation PRODUCT CHARACTERISTICS VHB pot bearing is comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along horizontal axis. Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding bar can be designed to limit or allow the movements as required from the structures. Pot bearing is divided into 2 main types: Fixed pot bearing and sliding pot bearing. Fixed pot bearing: The bearing only allows the head of structure to have rotary movement and transfers the pressure through a fixed point. Sliding pot bearing: This type of bearing, including free sliding bearing and guided sliding bearing, allows the head to have both rotary movements and transversally or multidirectional movements. To ensure the long-life durability, VHB pot bearing is protected against corrosion by the following methods two-component epoxy coat, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117
The hammer head used in coal mine has abrasion resistance and impact resistance. The hammer head is an important working part of the crusher. Its production capacity is determined by its shape and material quality. Generally speaking, the hardness of the material is higher, the hardness of the hammer head material is higher, the hardness of the hammer head is higher, the greater the wear resistance of the hammer head is greater, the impact load of the hammer head is greater, the higher the requirement for its toughness. The wear of hammers is related to many factors, such as material, underground environment, weight, product quality, etc. The maintenance and maintenance of each part of the hammer head is very important, as the core parts of the hammer head, not only the market demand is large, the crusher hammer head wear resistance also to meet the standard. Henan Shuangzhi mainly produces crusher accessories such as crushing shaft group, hammer head, cutter tooth base, fixed base, fastening assembly, belt pulley and so on.
1. PRODUCT OVERVIEW VHB Pot Bearings made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268: 2014, AASHTO LRFD: 2007 â?? Section 18, ASTM D 5212 â?? 03, BS5400, EN1337, KS4420). VHB Pot Bearings are capable of withstanding high loads, displacements and rotation angles. This type of bearing is suitable for middle-range span structure, continuous bridge structure, etc. with a load capacity of up to 60000kN or above depending on projectsâ?? requirements. VHB pot bearings have a well-shaped structure, superior design, which are convenient for installation and maintenance during operation. 2. PRODUCT CHARACTERISTICS VHB pot bearings are comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along the horizontal axis. Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding part can be designed to limit or allow the movements as required from the structures. Pot Bearings are divided into 2 main types: Fixed pot bearings and sliding pot bearings. Fixed pot bearings: The bearings only allows the head of structure to have rotary movement and transfer the pressure through a fixed point. Sliding pot bearings: This type of bearings includes Free sliding bearings and Guide sliding bearings, which allows the dead to have both rotary movements and unidirectional or multidirectional movements. To ensure the long-life durability, VHB pot bearings are protected against corrosion by the following methods: painting with two-component epoxy coat, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg coating spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours.
1. PRODUCT OVERVIEW VHB Pot Bearings made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268: 2014, AASHTO LRFD: 2007 â?? Section 18, ASTM D 5212 â?? 03, BS5400, EN1337, KS4420). VHB Pot Bearings are capable of withstanding high loads, displacements and rotation angles. This type of bearing is suitable for middle-range span structure, continuous bridge structure, etc. with a load capacity of up to 60000kN or above depending on projectsâ?? requirements. VHB pot bearings have a well-shaped structure, superior design, which are convenient for installation and maintenance during operation. 2. PRODUCT CHARACTERISTICS VHB pot bearings are comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along the horizontal axis. Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding part can be designed to limit or allow the movements as required from the structures. Pot Bearings are divided into 2 main types: Fixed pot bearings and sliding pot bearings. Fixed pot bearings: The bearings only allows the head of structure to have rotary movement and transfer the pressure through a fixed point. Sliding pot bearings: This type of bearings includes Free sliding bearings and Guide sliding bearings, which allows the dead to have both rotary movements and unidirectional or multidirectional movements. To ensure the long-life durability, VHB pot bearings are protected against corrosion by the following methods: painting with two-component epoxy coat, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg coating spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours.
1. PRODUCT OVERVIEW VHB Pot Bearings made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268: 2014, AASHTO LRFD: 2007 Section 18, ASTM D 5212 03, BS5400, EN1337, KS4420). VHB Pot Bearings are capable of withstanding high loads, displacements and rotation angles. This type of bearing is suitable for middle-range span structure, continuous bridge structure, etc. with a load capacity of up to 60000kN or above depending on projectsâ?? requirements. VHB pot bearings have a well-shaped structure, superior design, which are convenient for installation and maintenance during operation. 2. PRODUCT CHARACTERISTICS VHB pot bearings are comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along the horizontal axis. Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding part can be designed to limit or allow the movements as required from the structures. Pot Bearings are divided into 2 main types: Fixed pot bearings and sliding pot bearings. Fixed pot bearings: The bearings only allows the head of structure to have rotary movement and transfer the pressure through a fixed point. Sliding pot bearings: This type of bearings includes Free sliding bearings and Guide sliding bearings, which allows the dead to have both rotary movements and unidirectional or multidirectional movements. To ensure the long-life durability, VHB pot bearings are protected against corrosion by the following methods: painting with two-component epoxy coat, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg coating spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours.
Material: A3 /XG08A Steel Process: Cold Heading Application: Accessories of disc Brake Pad for fixing wear indicator Market: OE/Aftermarket Sample: Free of charge MOQ: 100000pcs
PRODUCT OVERVIEW VHB pot bearing made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268:2014, AASHTO LRFD: 2007 Section 18, ASTM D521203, BS5400, EN1337, KS4420). VHB pot bearing is capable of withstanding high loads, displacements and wide angle rotation. This type of bearing is suitable for middle-range span structure, continuous bridge structure etc. with a load capacity of 60000kN or above depending on projects requirements. VHB pot bearing has well-shaped structure, superior design, which is convenient for installation and maintenance during operation 2. PRODUCT CHARACTERISTICS VHB pot bearing is comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along horizontal axis. Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding bar can be designed to limit or allow the movements as required from the structures. Pot bearing is divided into 2 main types: Fixed pot bearing and sliding pot bearing. Fixed pot bearing: The bearing only allows the head of structure to have rotary movement and transfers the pressure through a fixed point. Sliding pot bearing: This type of bearing, including free sliding bearing and guided sliding bearing, allows the head to have both rotary movements and transversally or multidirectional movements. To ensure the long-life durability, VHB pot bearing is protected against corrosion by the following methods: two-component epoxy coat, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117 standards Dimensions of upper plate in longitudinal direction Dimension of center point of anchor bolts of the upper plate on longitudinal direction B: Dimension of the upper plate on transverse direction Dimension of center point of anchor bolts of the upper
Towel rack , towel rod,shop dish,robe hook, thumbler holder, napkin ring, liquid soap dispenser , toilet paper holder, double soap dish, patch fitting, hydraulic patch, floor spring, glass connectors , shower hinges, plastic profiles, shower knight head accessories, glass door knobs, canopy fittings, point fixed glass fittings, shower glass sliding fitting, sliding system, spider fittings, fin plates, splice plates, routels, locks without cutout, door handles, glass railing accessories and other industries using architectural hardware products..
The Seeder T40 Fluid Head with Two-Stage Aluminum Tripod System with Mid-Level Spreader supports over 11 pounds of camera and rig, providing smooth camera movements. The head features fixed pan and tilt drag and fixed counterbalance. The tripod system features a 75mm ball/bowl quick leveling system. The head incorporates a bubble level that features a push-button switch to illuminate it for 30 seconds. The system has a stable operating range of about 29.1" to just over 60". The legs feature independent spread and incorporate rotating lever locks for comfortable and secure locking.
The Flame Retardant Hooded Coverall offers a built-in head protection option to the wearer plus added design features including knee pad pockets and a back hip pocket with flap, hood with drawcords, concealed stud fastening Fabric: 330g/M2, 100% cotton with a flame resistant finish. EN11611 CERTIFIED. The Flame Retardant Hooded Coverall offers a built-in head protection option to the wearer plus added design features including knee pad pockets and a back hip pocket with flap, hood with drawcords, concealed stud fastening Fabric: 330g/M2, 100% cotton with a flame resistant finish. EN11611 CERTIFIED.
Applicable to the three template needle injection mold, has the function of breaking the head and release a completed. Precision casting, precision, hook adopts advanced alloy steel by heat treatment and grinding, ditch is particularly strong, on both sides of the use of heat-resistant spring sheet, good elasticity, heat tolerance, several die one hundred thousand times capacity. The locking device to the outside force, not to hurt the mold, after the device has symmetrical sides, fixed pin hole of 5mm cutter knife; and fixed by the fixing pin, to increase the fixed.
1. Product Overview VHB Pot Bearings made by Vinh Hung Investment and Production Company Limited (Vinh Hung IP) are in compliance with standards (TCVN 10268: 2014, AASHTO LRFD: 2007 Section 18, ASTM D 5212 03, BS5400, EN1337, KS4420). VHB Pot Bearings are capable of withstanding high loads, displacements and rotation angles. This type of bearing is suitable for middle-range span structure, continuous bridge structure, etc. with a load capacity of up to 60000kN or above depending on projects requirements. VHB pot bearings have a well-shaped structure, superior design, which are convenient for installation and maintenance during operation. 2. PRODUCT CHARACTERISTICS VHB pot bearings are comprised of 4 main parts: top plate, piston, pot plate and elastomeric pad. The elastomeric pad is placed inside of pot plate, under the pressure of the load, the elastomeric pad experiences the temporary deformation inside the pot plate volume, it is capable of withstanding the forces and allows the movement as well as rotation along the horizontal axis. Piston and pot plate work as the connecting parts between the structures. Besides, the plus guiding part can be designed to limit or allow the movements as required from the structures. Pot Bearings are divided into 2 main types: Fixed pot bearings and sliding pot bearings. Fixed pot bearings: The bearings only allows the head of structure to have rotary movement and transfer the pressure through a fixed point. Sliding pot bearings: This type of bearings includes Free sliding bearings and Guide sliding bearings, which allows the dead to have both rotary movements and unidirectional or multidirectional movements. To ensure the long-life durability, VHB pot bearings are protected against corrosion by the following methods: painting with two-component epoxy coat, PU-based painting (Polyurethane), hot-dip galvanization according to ASTM A123 standards and especially the Al-Mg coating spraying method (at the ratio of 5% Al and 95% Mg) which ensures the anti-corrosion durability of up to 100 years, this method is proved by the salt-spraying test in 6000 hours. 3. PRODUCT INFORMATION Based on the characteristics, VHB pot bearings are divided into 3 types:
Printer Head Color type for Epson DX2 head for color 1520k 3000 c7000 9000 for F055090 Printer Head Model :F055090 100% New and Original Original DX2 Solvent Color Description-Original and Solvent, made in Japan, with ID/serial number Compatibility printer model: For EPSON Color-1520K/3000,7000/9000/9500 For Roland FJ-50 / FJ-52 / CJ-500 / SC-500 / SJ-500 / SJ-600 For Mimaki JV2-130 / JV2-90 / TX1 For Mutoh Rockhopper 48 (Falcon Outdoor) / Rockhopper 62 (Falcon Outdoor) / Rockhopper 38 (Falcon Jr) / RJ-800 / RJ-4000 (Falcon) / RJ-4100 (Falcon) / RJ-4100P (Falcon Plus) / RJ-6100-46 (Falcon) / RJ-6100-54 (Falcon) / RJ-6100-62 (Falcon) / RJ-6100-46+ (Falcon Plus) / RJ-6100-54+ (Falcon Plus) / RJ-6100-62+ (Falcon Plus) / RJ-6000-43 (Falcon) / RJ-6000-54 (Falcon) / RJ-6000-62 (Falcon)
Description: Tubing head is a spool with flange top, flanged bottom and two side outlets. It also can be called tubing spool. Top flange is equipped with lock screws to fix tubing hanger. Tubing head is installed on top of casing head, which consists of body housing and tubing hanger. It can hang tubing string and seal the annular space between tubing and production casing. Our company can manufacturer tubing head with standard structure, which includes tubing hanger installed on the cone of body housing. Tubing hanger can be tapped with BPV thread as per request.
Description: Tubing head is a spool with flange top, flanged bottom and two side outlets. It also can be called tubing spool. Top flange is equipped with lock screws to fix tubing hanger. Tubing head is installed on top of casing head, which consists of body housing and tubing hanger. It can hang tubing string and seal the annular space between tubing and production casing. Our company can manufacturer tubing head with standard structure, which includes tubing hanger installed on the cone of body housing. Tubing hanger can be tapped with BPV thread as per request.
Epson DX2 Printhead Solvent Colour F055090 / F055110 DX2 Print Head Color For Roland FJ-40/42 FJ-50/52 SC-500 SJ-500 SJ-600 CJ-500. Caution:This DX2 print head is waterbased printhead, Special ink has corrosivity, such as UV ink, Eco-solvent ink, Solvent ink etc,it will shorten the life of the print head. Feature Model Epson DX2 Print Head Color Head. Manufacturer Part Number F055090 F055110. Adaptable Models For EPSON: Color-1520K/3000,7000/9000/9500 For Roland: FJ-40/42, FJ-50/52, SC-500, SJ-500, SJ-600, CJ-500. For Epson: 3000, 7000, SC-800, SC-1520, SC-3000, PRO-7000/7500, PRO-9000/9500. For Mimaki: JV2-130 / JV2-90 / TX1. For Mutoh: Rockhopper 48 (Falcon Outdoor) / Rockhopper 62 (Falcon Outdoor) / Rockhopper 38 (Falcon Jr) / RJ-800 / RJ-4000 (Falcon) / RJ-4100 (Falcon) / RJ-4100P (Falcon Plus) / RJ-6100-46 (Falcon) / RJ-6100-54 (Falcon) / RJ-6100-62 (Falcon) / RJ-6100-46+ (Falcon Plus) / RJ-6100-54+ (Falcon Plus) / RJ-6100-62+ (Falcon Plus) / RJ-6000-43 (Falcon) / RJ-6000-54 (Falcon) / RJ-6000-62 (Falcon). Pompa-Electronic company mainly selling Print Head with wholesaler price and Pompa-Electronic is a leading supplier of Print Head, Inkjet Printers, Print Machinery Supplies, Print Parts, Printing Machinery, Printing Machinery Parts products. Accept Payment Using Credit Card, Bank Transfer, PayPal, Western Union. This price includes the cost of packaging, shipping and insurance, so the shipping costs will be financed by our store. For more information regarding the product, you can visit our official website. You can also looking for the other simillar product and you can place your order directly from our official website, Pompa-Electronic