1.Place it well at the working point. 2.Directly use it to press connection point with screwless couplers to link the two rebar.
Rebar range 16-40mm, No limitations on the type, composition, or weldability of steel bars, it's widely used in bridge construction.
Rebar range 16-40mm, No limitations on the type, composition, or weldability of steel bars, it's widely used in bridge construction.
Rebar range 16-40mm, No limitations on the type, composition, or weldability of steel bars, it's widely used in bridge construction.
Hebei Yida Anti Impact Rebar Coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the High Speed Tensile test of Anti instant impact by Germany Berlin BAM Laboratory. It has been widely applied at the sites where required high level of resistance to impact. The coupler sleeve will be perfect connected with rebar by cold swaged deformation in the application, and dual couplers will be connected by a high strength bolt.
Transition taper thread couplers are designed to splice different diameter bars where one bar can be roated and the bar is not restricted in its axial direction.
Upset Parallel Threaded Rebar Coupler 100% bar break through tensile test. Material of the rebar coupler is No.45 steel. High precision thread, full thread type, no false thread.
Hebei Yida BGZL-40B3 steel bar straight screw thread processing rib peeling machine is the exclusive use rib peeling knurling machine for the straight screw thread connecting. It is mainly used in the processing/fabrication of the end of the structural steel bar. Positive And Negative Screw Thread Model Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted.
1. Wide range of application, no weldability requirements for rebar, suitable for �?12 ~ 50mm HRB400, HRB500 same diameter or reducing diameter steel bar connection in any direction; 2. Convenient construction, fast connection speed, and the on-site connection and assembly operations take up a short time; 3. Environmentally friendly construction, no noise and pollution on site, safe and reliable.
YDZTS-40C Rebar Taper Thread Cutting Machine is designed and manufactured by Hebei Yida Reinforcing Bar Connecting Technology Co., Ltd. 1. It is mainly used as a special equipment to make taper thread on the end of the rebar in the processing of rebar connection. 2. The applicable diameter is from �¯�¿� 16 to �¯�¿� 40. It applies to Grade �¢?�¡ and �¢?�¢ level rebar. 3. It has reasonable structure, light and flexible, simple operation, high production efficiency. It is widely used in steel bar end processing of taper thread joints in concrete works. 4. It adapts to a variety of complex construction site environment.
Rebar Cold Extrusion Technology The Cold Extrusion Machine is made up by a hydraulic Clampy with Cold Pressing Dies and Hydraulic Oil Pump.� Only 1 â?? 3 kw power of oil pump, which is not limited by power capacity, has flexible structure and suitable for operation on several machines. Advantages: No professional and experienced worker needed, able to connect changed steel bar of different diameters. Save 80% of connector steel consumption. Only needs 1 3m to stamp each connector, which is about ten times faster than ordinary welding. No flammable gases, not affected by rainy or cold weather. Relieve congestion of the connecting point, facilitated concrete pouring.
This Automatic Upset Forging Machine is the preparative machine for rebar connection in construction work. Its main function is to forging the end part of rebar to raise the rebar area and therefore enlarge the strength of rebar end.
Through the headed bars of anchor plate to increase the friction between the concrete and steel, improve its ability to resist drawing, in case of steel was pulled out,instead of bent ends. It is approach greatly simplifies rebar placement and reduces congestion.
Comparison of using laps and rebar coupler: 1. Reduce or eliminate some of the costs of lap splicing by using rebar coupler. 2. The use of laps can be time-consuming in terms of desigh and installation and the increased amount of rebar creats congestion within the concrete The Characteristics of the Usage Standard Model used in the occasion for connecting the steel bar in normal situation Different Diameter Model used for connecting the steel bar in different diameters Flared Model used for the steel bar which was hard to match Positive And Negative Screw Thread Model Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. Locking Nut Model Used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
BGZL-40B3 steel bar straight screw thread processing rib peeling machine is the exclusive use rib peeling knurling machine for the straight screw thread connecting. It is mainly used in the processing of the top of the structural steel bar.
Adhesives & Sealants
Industrial Pumps
Industrial Valves
Railway Track Trolley Light Track Trolley/0.5T-1T loading capacity hand push trolley For transporting material, equipment and tools on rail tracks. Light, robust transport trolley with a platform of perforated aluminium plate with an anti-slip surface. No accumulation of water or dirt. Ball bearing synthetic running wheels/optionally sheet steel jacketed. 2 or 4 carrying handles in different positions. Parking brake acting on two wheels. Foldable type, easy to carry. Various track gauges and designs on request.
The full range of 16v and 20v brushless systems gives you variable speed control and a safe braking system with a versatile battery and allows for a large number of charge cycles Battery voltage:20v Max diameterï¼?30mm Charging time:1h Delivery time:30 days for OEM,15 days for ready goods Payment method:T/T,L/C Standard accessory:BMC BOX*1,battery*2,charger*1