Lithium battery Rail impact wrench machine Vertical double lithium electric torque wrench (model: U-LD81901) is a railway digital display torque wrench with vertical operation and double lithium electric protection technology, and its working torque is>3000N m. The torque value is adjustable and controllable, which is specially used for various railway bolt operations. The vertical double lithium electric torque wrench (model:LJ - LDB1901) is composed of a control lever, a motor, and a reducer. It adopts the unique ergonomic flat impact principle, which makes the machine more safe, labor-saving, and efficient. Its unique overall waterproof design ensures the all-weather construction needs. Torque regulation and compensation can make torque control more accurate to meet construction requirements. Model Battery Rail power wrench LJ-LD81901 Rated voltage (DCV) 18-36 Max. torque 3000 N.m motor speed (RPM) 0-3000 optional impact frequency (BPM) 0-5000 optional battery pack capacity (ah) 18-36 operating temperature range (-40 ~ 50 ) torque control adjustable and controllable
NLB-1800 Rail Bolt Wrench The NLB-1800 Rail bolt wrench is novel in design, compact in structure, small in volume, light in weight, strong in maneuverability, two-stage shock absorption of handle, portable in hand, convenient in getting on and off the track, especially suitable for the regional maintenance operation of track bed where turnout, tunnel, bridge and culvert and other large and medium-sized railway maintenance machinery cannot work. Specification Model NLB-1800 Type Rail Bolt Wrench Material Stainless Steel Dimensions (L x W x H) 830*280*380mm Petrol engine Two stroke petrol engine Rated Revolution 12000r / min Rated power 3.6kw Spindle speed 1130R / min Torque â?¥ 1800n. M
NLB-500 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. With two stroke petrol engine and 18kg lightweight can achieve easily vertical and horizontal wrenching tasks. Specification item NLB-500 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) 830*280*380 mm Engine 2 stroke, Single cylinder, Air cooling RPM 7500r/min Power 1.42kw Spindle RPM 800r/min Rated torque 500N.m Peak torque 1000N.m Weight 18kg
This hydraulic rail bending machine is used for the bending operation of railway seam lines and welded joints of seamless tracks and other low-collapsed parts of steel rails. It can also be used as vertical bending and supporting equipment in the laying of seamless tracks; suitable for all types Rails. The machine has simple structure, convenient operation, safe operation and easy maintenance. It is an effective tool for rectifying rail joint problems Model FMG-2.2 Working Pressure 47 MPa Max. bending force 900 kN working stroke 120 mm Pivot point distance 1200mm Machine size 1435x696x 385 mm Weight 80kg
LG-900 Hydraulic Rail Tensor This machine can not only be used for repairing the broken rails of the seamless track, but also can be used for the stress relief of the seamless track and the adjustment of the track seam in sections of the ordinary track, and is suitable for various rail types. The use of this product can change the traditional method of repairing broken rails, that is, adopting rewelding without inserting short rails, which saves time and effort, expands the operating rail temperature range, and prevents the actual lock rail temperature from changing. Specification Model LG-900 Type Hydraulic Rail Tensor Material Aluminium Dimensions (L x W x H) (mm) 1450*780*650 mm Working Pressure 67 MPa Max. tensile force 900 kN Max. compressive force 200 kN Cylinder stroke 500 mm Power supply Petrol engine or electric motor Locking form Wedge iron lock Weight 380 kg
LG-900 Hydraulic Rail Tensor This machine can not only be used for repairing the broken rails of the seamless track, but also can be used for the stress relief of the seamless track and the adjustment of the track seam in sections of the ordinary track, and is suitable for various rail types. The use of this product can change the traditional method of repairing broken rails, that is, adopting rewelding without inserting short rails, which saves time and effort, expands the operating rail temperature range, and prevents the actual lock rail temperature from changing. Specification Model LG-900 Type Hydraulic Rail Tensor Material Aluminium Dimensions (L x W x H) 1450*780*650 mm Working Pressure 67 MPa Max. tensile force 900 kN Max. compressive force 200 kN Cylinder stroke 500 mm Power supply Petrol engine or electric motor Locking form Wedge iron lock Weight 380 kg
Place of Origin Hubei, China Type Rail switch grinding machine Material Stainless Steel Dimensions (L x W x H) (mm) 2100*1120*1030mm Brand Name Linkage Product name Rail switch grinding machine for track maintenance function Rail switch point grinding Engine Honda GX270 Petrol engine Grinding wheel speed: â?¥3600r/min Feed adjustment accuracy: â?¤l0mm Weight â?¤117kg Rated power: 5.1kW Grinding wheel feeding stroke: â?¥80mm Grinding wheel rotation angle: â?¥30�° NCM-5.1 frog and switch grinding machine is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
Place of Origin Hubei, China Type Electric Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1200*420*900mm Brand Name Linkage Engine 2.2kW, 380V or 220V electric motor Grinding stone speed 2860 r/min Grinding stone specification 150*55*70mm Grinding stone feeding stroke 50mm Turning angle of grinding stone 90�° Weight 80kg Electric Rail Grinding Machine The design of FMG-2.2 electric rail profile grinder allows you accurate and stable profile grinding up to 90�°about the rail head by rotation of the machine using its turming device and its inclinable operating arm. According to customer needs, 380V three-phase motor can be selected as power or 220V single-phase power as power. With good visibility of the grinding area assures you of a high quality finish.
Place of Origin Hubei, China Type rail profile grinding machine Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Brand Name Linkage Product name rail profile grinding machine Profile wheel span: 1000mm Engine 2 stroke petrol engine M165 Grinding stone speed: â?¥3900r/min Grinding stone feeding stroke: 42mm Fuel tank volume: 4.5L Feed adjustment accuracy: 0.125mm Power: 6.0kW Grinding stone inclination: 0~90�° Grinding stone specification: 150*55*70mm NGM-6.0 Internal Combustion Rail Profile Grinding Machine This Rail Profile Grinding Machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
NGM-5.1 Rail Profile Grinding Machine This machine is mainly used for forming and grinding operations of railway rail welding joints and rail surface repairs. The development and application of the CNC feed unit realizes the intelligent control of the grinding wheel feed. Significantly improve the profiling accuracy and polishing efficiency. BENIFITS â?? Angle of the grinding head is set using an adjustment wheel, lowering/raising of the grinding stone is electrically contlled â?? Equipped with spark protection device â?? Equipped with electric control system prevents over grinding by limiting the lowering of the grinding stone â?? Grinds the whole head of rail in one single operator, no need to turn the machine or to handle it Specification Model NGM-5.1 Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) 1500 * 450 * 750 mm Engine HONDA GX270 Power 5.1 kW Grinding wheel specifications �?125x65 mm Feeding accuracy 0.1 mm Turning angle of grinding stone �±90�° Spindle revolution 4100r/min Grinding stone feeding stroke 42 mm Profile wheel span 1000 mm Weight 100 kg Weight of supporting rod 14 kg
Rail wave grinding machine The GBM-7.6 rail wave abrasion grinding machine is a professional machine used for the wave abrasion and grinding of the rail top. This machine is suitable for various rails of 43~75kg/m. Model GBM-7.6 Engine Honda GXV390, 7.6kW, single cylinder, air-cooled 4-stroke petrol engine Power supply 7.6kw Spindle revolution â?¥3600r/min Profile wheel span â?¥1000mm Grinding stone feeding stroke â?¥45mm Grinding stone feeding accuracy â?¤0.11mm Weight 85KG
NCM-5.1 frog and switch grinding machine is specifically designed for grinding operations through switch and crossings and either side of the rail head. The rail grinding device of the machine can be tilted by 30�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The frog and switch grinding machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. NCM-5.1 Engine Honda GX270 Petrol engine Power supply 5.1kw Spindle revolution â?¥3900r/min Grinding stone inclination 30 Grinding stone feeding stroke 80mm Grinding stone feeding accuracy 1mm Weight 117KG
Place of Origin Hubei, China Type Other Material alumunium Dimensions (L x W x H) (mm) 1200*400*550mm Brand Name Linkage Product name rail profile grinding machine Usage rail profile grinding machine Application rail profile grinding machine Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes NGM-6.0 Internal combustion rail grinding machine, Itâ??s suitable for grinding rail welding seam, uneven joint, rail side fat edge, rail surface repair welding of rail 43kg/m-75kg/m. Its grinding quality is good and itâ??s easy and simple to handle, and convenient to be up on and down from the rail. Itâ??s an indispensable tool for railway engineering heavy repair, maintenance and first aid repair. NGM-6.0 Engine 2 stroke petrol engine M165 Power supply 6.0kw Spindle revolution â?¥3900r/min Grinding stone inclination 0~90�° Grinding stone feeding stroke 80mm Grinding stone feeding accuracy 1mm Grinding stone specification �?150x�?55x70mm Weight 60kg
Place of Origin Hubei, China Type Other Material alumunium Dimensions (L x W x H) (mm) 1900*1200*2500mm Brand Name Linkage Product name automatic rail tamping machine Usage automatic rail tamping machine Application automatic Hydraulic rail tamping machine Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes Other name track ballast tamping machine YD-22III Smart rail tamping machine unit is a renewal product developed by our factory with new material and new technology. It has collected the tamping experience of users at home and abroad. It can do tamping works not only on the ballasted track of concrete sleeper type II and III in China, but also on various kinds of concrete sleepers and steel sleepers in foreign countries.This machine is suitable for tamping operation of different types of rails and concrete sleeper line after large and medium repair and sieving operations, and also suitable for tamping operation of ballast on newly built track bed. The equipment has superior performance, reasonable structure, safety and reliability, and high working efficiency. It fully meets the needs of railway ballast tamping operation
Place of Origin Hubei, China Type Other Material alumunium Dimensions (L x W x H) (mm) 1500*400*250mm Brand Name Linkage Product name Hydraulic rail tamping machine Usage Hydraulic rail tamping machine Application Hydraulic rail tamping machine Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes Other name track ballast tamping machine function railway ballast tamping work YD-22 hydraulic Tamping Machine is a kind of professional machinery used for railway line ballast tamping maintenance except for turnouts. It can be operated with train inervail time, without closing sections. It is equipped with three power modes. They are petrol, diesel and electric. BENIFITS â?? Engine types: Honda GX390 petrol engine or SF 190 diesel engine or electic engine. â?? It is sitbl for the tamping operation in the new constuction of ordinary railway lines and the large-scaie or medium-scale railway line maintenance â?? It can complete the tamping operation of various types of concret seepers and wooden sleepers â?? Equipped with automatic rail clamping device â?? Equppped wih the f-tac walkin frame, the machine can be removed off at any place and any time
NQGâ??5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Place of Origin Hubei, China Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 800*560*500mm Brand Name Linkage Engine GX270 petrol engine 5.1KW Specification of cutting disc 400*32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticalityâ?¤0. 4mm, flatnessâ?¤0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kg
NQG 5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m 75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc. Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 670*600*510mm Brand Name Linkage Internal combustion engine HONDA GX200 Engine Power 4.8kW Engine Speed 3600r / min Thin grinding wheel (spindle) Spindle speed 3030r / min Specification (linear velocity) 400 * 32 * 4 (â?¥70m /s) Cutting time 60kg / m rail, â?¤120S Number of usage 50kg /m rail, use â?¥ 4 times Number of usage 2 60kg /m rail, use â?¥ 3 times Machine weight 39.5kg
NZG31 Petrol Engine Rail Drilling Machine This machine is an indispensable tool for railway maintenance construction and emergency repair operations It uses a hollow drill bit a screw nut clamping mechanism with quick opening function fast clamping accurate positioning fast drilling simple operation and safety use Place of Origin Hubei China Type Rail drilling Machine Material Stainless Steel Dimensions L x W x H mm 800340400 mm Brand Name Linkage Product name Rail Cutting Machine Place of Origin Hubei Idle Rev 270rmin Borehole diameter 9836mm Power of petrol engine 12kW Spindle RPM 250 285 rmin Drilling time 25s Specification linear velocity 400 32 4 70m s Engine type fourstroke petrol engineHonda weight 17kg
Place of Origin Hubei, China Type Sleeper Drilling Machine Material Stainless Steel Dimensions (L x W x H) (mm) 420*500*1070mm Brand Name Linkage ENGINE 2 stroke petrol engine 1.42kW Max. drill diameter 20mm Drill speed â?¥350r/min Drill speed2 â?¤20s Weight 14kg NZMZ-20 Portable Sleeper Drilling Machine This machine is light-weight and easy to use and has the purpose of quickly drilling wooden sleepers ensuring precision andmaximum safety for the operator. It is composed of: * 4-stroke petrol engine with valves at the top and special lubrication to work on 360�°; * High-strength speed reducer gears lubricated by special TK3 grease that guarantees excellent lubrication and long life; * Ergonomic handle with throttle lever and engine safety lock; * Safety system with centrifugal clutch; * Possibility of inserting a lever able to rotate the drill bit in case of blockage; * Quick coupling / uncoupling spindle of the drill bit. Optionally we can supply: * Drill bit protection and drilling depth regulator ; * Trolley with 3 wheels for different types of track gauge; * SleeperDrill Bits.
Contact rail gauge for METRO measurement The contact rail gauge is a gauge for measuring the parameters of the subway contact rail. Measurement parameters can be customized according to customer requirments,detachable and easy to carry. the main ruler body use high strengthsquare tube aluminum alloy. advantages:precise measurement,new style,reasonable design. Model: LJ-JCG-I Vertical Measure range: customize Horizontal Measure range: customize Accuracy: 0.5mm
