Product Details of Catalytic Converter Exhaust Manifold for Nissan Altima1.High precious metal load and high technology washcoat for premium performance.2.Stainless steel construction, ,internal substrate material and precious metal loading have been carefully engineered for maximum efficiency and to avoid "MIL" code issues that are common with lower quality products.3.Federal Emissions compliant design.4.EPA Approved;5.TWG products are covered by 25,000-miles catalytic performance & 50,000-miles structural integrity warranty.Catalytic Converter Exhaust Manifold for Nissan AltimaCatalytic converters are usually used with internal combustion engines fueled by either petrol (gasoline) or diesel.Manufacturer Part Number: 674-659 , RI19590Interchange Part Number:40810, 641169, 1195,NIS2527, NIS2534Fits the following vehicles:Fitment2002 2003 2004 nissan altima Base Sedan 4-Door/S Sedan 4-Door/SL Sedan 4-Door 2.5L2002 2003 2004 2005 Nissan Sentra SE-R Spec V Sedan 4-D/SE-R Sedan 4-Door 2.5L2003 Nissan Sentra Limited Edition Sedan 4-Door 2.5L2004 Nissan Sentra S Sedan 4-Door/LE Sedan 4-Door 2.5LFeature of Direct Fit Catalytic Converter for Wrangler 4.0LCeramic catalyst cores are typically wrapped in mounting mats made of ceramic fibers and packaged into steel housings. Specially developed materials and technologies allow the design and construction of extremely durable catalytic converters. A number of converter canning technologies were developed, including clamshell, tourniquet and stuffing. In each of the technologies, the converter shell geometry has to provide the required mounting density for the mat. The design of converter inlet and outlet headers or cones affects the gas flow distribution and pressure drop. In applications with space limitations, catalysts can be placed inside catalytic mufflers.Workshop
NCM-5.1 Rail Switch Grinding Machine NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head. Specification Model NCM-5.1 Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 2100*1120*1030mm Engine Honda GX270 Petrol engine Rated power 5.1kW Grinding wheel speed 3600r/min Grinding wheel feeding stroke 80mm Feed adjustment accuracy l0mm Grinding wheel rotation angle 30° Weight 117kg
Powerful - 65cc petrol earth auger with 1.2 Liter fuel tank capacity. 3.2HP, 9000rpm for maximum power. Uses 2 stroke oil mixture - 30:1 - which will extend engine life, reduce emissions and run reliably in all weather conditions. Comfortable - Ergonomic design; dual handles for operator control and comfort. Anti-vibration foam grips reduce fatigue. Compact, attractive and easy to operate. Effortless - Easy pull recoil starter for virtually effortless starting. The drill digs no less than 70 pits per hour, and at 8 working hours, it can dig 560 pits in a day, which means it can do more than 30 times as much work as manual work. Versatile - The throttle control system is very popular with operators because it allows simple control of the auger. It has a damper lever to simplify start-up procedures and reduce the possibility of flooding, while the auger brake is designed to automatically stop the auger when it hits a hard underground obstacle. MODEL: EA650G Engine type : 1E48F Power : 2.4kW / 3.2HP Displacement : 65cc Motor type : Gasoline Drill diameter : 30mm - 200mm Fuel Tank Capacity : 1500ml Fuel mixture ratio : 30:1 Weight : 20kg
NLB - 600 type internal combustion bolt wrench is suitable for railway line sleeper bolt and nut of unscrew and fastening operation. This machine is double sleeve and homework, reverse torque large in 600 n m., can unscrew various corrosion bolt, the working efficiency is high. At the same time change impact torque for static torque, make the operation of rail fastener pressure error is small; Reversing agile, centralized control, convenient operation, it is a lot of multifarious pine, bolt operation indispensable necessary equipment. Parameter Parameter Of NLB-600 railway maintenance rail bolt wrench with petrol engine model NLB-600 the gasoline engine type engine the gasoline engine power rating 4.5KW the engine speed 3600 r/min sleeve quantity 2 sleeve center distance 214 + 0.5 mm tightening torque adjustable 80-170 (N, m) maximum unscrew torque > 600 n, m factory tightening torque 125 N, m work efficiency
Product Description NGM-6.3 Digital Control Profiling Rail Grinder NGM-6.3 Digital control profiling rail grinder , with petrol engine . Mainly used for the restoration and grinding of welded joints, calendering burrs, rail surface repair, waveform wear, etc. in the maintenance and construction of railway rails. BENIFITS 1.Gasoline driven, strong adaptability to an open working environment. 2.The feeding of the grinding controlled by the electric, high polishing precision. 3.Following copying, easy operation. Specification Supporting power imported GX270 gasoline engine (6.3kW / 3600rpm) MCU running speed 16 MIPS LCD display resolution 128 64 DOTS Timer real-time display resolution hour, minute and second Timer cumulative display resolution hours Timer output resolution year, month, day, hour, minute Magneto output voltage ~ 12V External charging power supply ~ 220 V Grinding wheel stroke 59 mm Profiling track 1010 mm Deflection angle of profiling �± 90 �° Grinding wheel inching feed accuracy 0.01 ~ 0.5 mm (real-time setting) Working environment temperature - 20 ~ + 70 Overall dimension of main engine (length* wide* Height) 1565 550 973 (mm) Weight 99 kg
Product Description NGYM-I Rail Waist Grinding Machine Rail waist grinding machine is suitable for grinding works before railway laying, subway maintenance welding and gluing insulated joints construction. This work is one of the heavy workload jobs in the rail welding operation. In the past, it was mainly carried out by hand-held electric grinder or angle grinder, it has led to high labor intensity, low operation efficiency and slow working speed, poor grinding surface quality, serious environmental pollution etc. The rail waist grinding machine is suitable for 50kg/m-75kg/mrails. Specification Model NGYM-I Material Stainless Steel Dimensions (L x W x H) (mm) 1120*430 *780mm Engine petrol engine Max output power 4.0kw/3600rpm Grinding wheel spindle speed 3600rpm Grinding wheel diameter �¦ 100-230mm Grinding wheel size 2-124*106*34.5/18 G-A20 P 7B-45m/s Machine weight 57kg
Product Description Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model NGM-4.4II Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1480*470*810mm Engine Two-stroke petrol engine/4.4KW Main shaft rpm 4670r/min Bolt screwing flat grinding wheel 125*65*M20 Grinding head angle of inclination 90° Grinding head stroke 45 mm Total weight 61kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NCM-5.1 Rail Switch Grinding Machine NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head. Specification Model NCM-5.1 Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 2100*1120*1030mm Engine Honda GX270 Petrol engine Rated power 5.1kW Grinding wheel speed 3600r/min Grinding wheel feeding stroke 80mm Feed adjustment accuracy l0mm Grinding wheel rotation angle 30° Weight 117kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NCM-5.1 Rail Switch Grinding Machine NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head. Specification Model NCM-5.1 Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 2100*1120*1030mm Engine Honda GX270 Petrol engine Rated power 5.1kW Grinding wheel speed 3600r/min Grinding wheel feeding stroke 80mm Feed adjustment accuracy l0mm Grinding wheel rotation angle 30° Weight 117kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. PRODUCT SPECIFICATIONS Model NQGâ??5.8 Type Abrasive Rail Saw Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
This machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, fast clamping, accurate positioning, fast drilling, simple operation and safety use.The rail clamping device has self-locking function, and high drilling precision. The hollow drill bit is used, and special twist drills below 13.5 can also be clamped according to needs. It has automatic water supply function when drilling, and is suitable for maintenance, emergency repair and overhaul operations in public works departments. Item Petrol Engine Rail Drilling Machine Dimensions (L x W x H) (mm) 650*230*250mm Place of Origin China Model NZG-31Internal Combustion Steel Rail Drilling Machine Internal Combustion Engine Honda Gasoline Engine GX35 Rotate Speed without load 270r/min Rate of Power 1.2KW Driling Diameter 31, 13.5, 9.8 Drilling Time 25s Weight 17KG
Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model NGM-4.4II Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1480*470*810mm Engine Two-stroke petrol engine/4.4KW Main shaft rpm 4670r/min Bolt screwing flat grinding wheel 125*65*M20 Grinding head angle of inclination 90 ° Grinding head stroke 45 mm Total weight 61kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
LG-900 Hydraulic Rail Tensor This machine can not only be used for repairing the broken rails of the seamless track, but also can be used for the stress relief of the seamless track and the adjustment of the track seam in sections of the ordinary track, and is suitable for various rail types. The use of this product can change the traditional method of repairing broken rails, that is, adopting rewelding without inserting short rails, which saves time and effort, expands the operating rail temperature range, and prevents the actual lock rail temperature from changing. Specification Model LG-900 Type Hydraulic Rail Tensor Material Aluminium Dimensions (L x W x H) (mm) 1450*780*650 mm Working Pressure 67 MPa Max. tensile force 900 kN Max. compressive force 200 kN Cylinder stroke 500 mm Power supply Petrol engine or electric motor Locking form Wedge iron lock Weight 380 kg
