Advantages: *Applies to bars from 14 to 40mm *No need of machines or specialized personnel for their application. *No torque gauge required, the screws are deheaded. *Comply with UK CARES, ACI318, ACI439 and cyclic load testing standards.
Casing with a separate power supply unit power supply of hydraulic tools to squeeze on steel. The final connection ensures a tensile strength of at least 125% of the nominal yield strength of the reinforcement grade 500 MPa.
Rebar fabrication equipment, bsts rebar thread cutting machine used for LINXION PI mechanical connection, best selled in India market. The advantages: 1.High efficency by manual operation of thread cutting; 2.Easy operate, no need to change other parts at same thread pitch, applied for 16-40mm all diameter deformed bars. 3.Easy and simple for working man
1.Place it well at the working point. 2.Directly use it to press connection point with screwless couplers to link the two rebar.
Rebar range 16-40mm, No limitations on the type, composition, or weldability of steel bars, it's widely used in bridge construction.
Rebar range 16-40mm, No limitations on the type, composition, or weldability of steel bars, it's widely used in bridge construction.
Rebar range 16-40mm, No limitations on the type, composition, or weldability of steel bars, it's widely used in bridge construction.
Hebei Yida Anti Impact Rebar Coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the High Speed Tensile test of Anti instant impact by Germany Berlin BAM Laboratory. It has been widely applied at the sites where required high level of resistance to impact. The coupler sleeve will be perfect connected with rebar by cold swaged deformation in the application, and dual couplers will be connected by a high strength bolt.
Transition taper thread couplers are designed to splice different diameter bars where one bar can be roated and the bar is not restricted in its axial direction.
Upset Parallel Threaded Rebar Coupler 100% bar break through tensile test. Material of the rebar coupler is No.45 steel. High precision thread, full thread type, no false thread.
Hebei Yida BGZL-40B3 steel bar straight screw thread processing rib peeling machine is the exclusive use rib peeling knurling machine for the straight screw thread connecting. It is mainly used in the processing/fabrication of the end of the structural steel bar. Positive And Negative Screw Thread Model Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted.
1. Wide range of application, no weldability requirements for rebar, suitable for �?12 ~ 50mm HRB400, HRB500 same diameter or reducing diameter steel bar connection in any direction; 2. Convenient construction, fast connection speed, and the on-site connection and assembly operations take up a short time; 3. Environmentally friendly construction, no noise and pollution on site, safe and reliable.
YDZTS-40C Rebar Taper Thread Cutting Machine is designed and manufactured by Hebei Yida Reinforcing Bar Connecting Technology Co., Ltd. 1. It is mainly used as a special equipment to make taper thread on the end of the rebar in the processing of rebar connection. 2. The applicable diameter is from �¯�¿� 16 to �¯�¿� 40. It applies to Grade �¢?�¡ and �¢?�¢ level rebar. 3. It has reasonable structure, light and flexible, simple operation, high production efficiency. It is widely used in steel bar end processing of taper thread joints in concrete works. 4. It adapts to a variety of complex construction site environment.
This Automatic Upset Forging Machine is the preparative machine for rebar connection in construction work. Its main function is to forging the end part of rebar to raise the rebar area and therefore enlarge the strength of rebar end.
Through the headed bars of anchor plate to increase the friction between the concrete and steel, improve its ability to resist drawing, in case of steel was pulled out,instead of bent ends. It is approach greatly simplifies rebar placement and reduces congestion.
Comparison of using laps and rebar coupler: 1. Reduce or eliminate some of the costs of lap splicing by using rebar coupler. 2. The use of laps can be time-consuming in terms of desigh and installation and the increased amount of rebar creats congestion within the concrete The Characteristics of the Usage Standard Model used in the occasion for connecting the steel bar in normal situation Different Diameter Model used for connecting the steel bar in different diameters Flared Model used for the steel bar which was hard to match Positive And Negative Screw Thread Model Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. Locking Nut Model Used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
BGZL-40B3 steel bar straight screw thread processing rib peeling machine is the exclusive use rib peeling knurling machine for the straight screw thread connecting. It is mainly used in the processing of the top of the structural steel bar.
Round and shaped oil tempered wire, stainless steel wire, cold drawn spring wire.
Spices like red chilli, cold compressed oils, turmeric powder, dried mushrooms,etc.
4-layer muslin organizer baby bag with zipper and hanging drawstring. The muslin bag has a width of 26 cm, a length of 19 cm and a bottom depth of 4 cm. It is lined and can be machine washed on a cold program.
