Introduction The ARTX series filter cartridge uses high-quality polyacrylonitrile as the raw material, which is high-temperature carbonized into powdered fibers in a high-purity inert gas environment. Through special formulation and surface design, it enhances the ability to adsorb suspended solids and precipitated particles in liquids, achieving deep filtration effect. This product performs excellently in chlorine removal, purification and decolorization, adsorption of organic compounds and metal ion removal. Specification Filter material: Powdered activated carbon fiber Length: 5" ~ 40" Pore size: 5 ~ 100 micron (multi-micropore combination) Diameter: 65 mm Interface type: DOE Gasket/O-rings: TPE Application Chemical industry: Air purification, organic solvent decolorization Drinking water: Chlorine removal, odor removal, water purification Electronics industry: Water treatment purification, PCB electroplating, semiconductor FRAME electroplating solution, copper-nickel electroplating solution filtration, etc. Food industry: Filtration for beverages, clarification of wines, etc.
Introduction The common materials of ARLD series filter bags include PE, PP, NMO, and PTFE. This series of products utilizes sewing or hot-melt technology, and the surface is heat-treated at high temperature to effectively prevent fiber shedding. The uniform filter layer has highly efficient filtration of solid and colloidal particles. The high-strength filament fibers enable high flow rate and strong dirt-holding capacity, ensuring stable structure. The filter bags are made of different materials with different chemical corrosion resistance and heat resistance properties, widely applied in primary liquid filtration in various industries. Specification Filter material: PE, PP, NMO, PTFE Pore size: 0.5 ~ 300 micron Filter bag size: Various specifications can be customized Collar ring material: PP, stainless steel Application Pharmaceutical industry: Filtration of various liquid medicines, traditional Chinese medicine preparations, antibiotics, injection bottle washing water Food industry: Filtration of food, beverages, alcohol, drinking water Chemical industry: Filtration of chemical solvents, paints, coatings, inks, adhesives, printing and dyeing pigments, metal cutting, etc.
Introduction The ARYS series filter housing is constructed from high-strength stainless steel materials (SUS316L or SUS304), achieving a mirror finish of approximately 0.6m through mechanical polishing on both inner and outer surfaces. The structure of the stainless steel filter is well-designed, ensuring no sanitary dead corners in the housing, making it easy to install and clean, minimizing maintenance costs, and matching with filter cartridges of various materials and models. The product has excellent corrosion resistance, as well as high temperature and high pressure resistance, making it suitable for long-term use in various harsh environments. The corresponding specifications and dimensions can be customized according to the actual production needs of various industries to meet the user's needs for filtering effects. Our product features a sanitary design that complies with China's pharmaceutical industry "GMP" standards and is suitable for the filtration of liquid or gas. Specification Material: SUS304, SUS316L Filter type: Liquid Length(matched cartridge): 5" ~ 60" Filter specification: Single core or multi-core Application Suitable for liquid filtration in food and beverage processing, pharmaceutical, biotechnology, microelectronics, semiconductor industries, petrochemicals, water treatment industries, etc.
This product is a green mercury-free battery special graphite developed by our company on the basis of the original ultra-low molybdenum and high purity graphite. It has the characteristics of high purity, excellent electrical properties and ultra-low trace elements. Various trace elements in graphite are strictly controlled by the domestic advanced chemical production process. The technical performance of the products is stable, ranking the advanced level of similar products in China. It can completely replace the imported graphite powder, which can greatly improve the use and storage life of the battery, and is an important raw material for green and environmentally friendly mercury-free alkaline batteries. Type: T-399.9 Performance: high temperature resistance, good electrical and thermal conductivity, strong chemical stability, acid and alkali corrosion resistance, non-toxic and harmless, is an excellent green environmental protection material. Application: Mainly used in green mercury-free alkaline battery, secondary battery, lithium ion battery, tube inside and outside coating.
EPDM foam tape stands for ethylene propylene diene rubber tape. Closed cell EPDM foam products are formed by foaming the synthetic rubber into soft and elastic foaming product. EPDM (ethylene propylene diene rubber) is a saturated polymer with excellent aging resistance, weather resistance and chemical resistance, excellent electrical insulation, and good impact elasticity. The most important feature is its superior ability to resist oxidation, ozone and erosion; It resists heat, light, oxygen, and especially ozone. Furthermore, EPDM is essentially non-polar, resistant to polar solutions and chemicals, with low water absorption and good insulation properties. Features of EPDM Foam Tape 3mm high-density closed-cell EPDM foam as carrier Coated with special formula of very high tack adhesive Laminated with yellow kraft paper easy release liner Excellent properties of elasticity, easy to compress Outstanding chemical resistance, slip resistance Good high temperature resistance Stable chemical properties, good corrosion resistance Outstanding conformity to uneven surfaces If you are looking for a reliable tape factory, don't hesitate to contact us!
Martensite stainless steel belt MS1650 is made of precipitated, quenched, martensitic stainless steel, and this class has high strength, hardness and corrosion resistance. After heat treatment, the mechanical properties of the products will be more perfect and reach up to 200 mpa compressive strength.This class steel belt can be used at high or low temperature environment(450 �° c) . It has excellent corrosion resistance to the atmosphere and to dilute acids or salts,the same corrosion resistance as steel 304 and 430. ##Martensite steel belt characteristics Hard surface with strong strength. Excellent fatigue resistance. Good corrosion resistance. Easy to repair and maintain. High welding technology, can be shipped endless. Dynamic strength The definition of fatigue limit is that under a certain alternating stress, 50% of the test samples can withstand the load cycle of 2 million times. Test at 20 dry environment, the fatigue limit of parent metal is + 630 N/mm squared (91 Ksi). ##Corrosion resistance MS1650 shows good corrosion resistance under normal air conditions. However, the steel belt should not be applied to the environment with hydrochloric acid. ## Scope of supply Length: customizable Width: 1000/1200/1500/2000/3000. Thickness: 1.0/1.2/1.6//2.0
Elite HFTE planetary drives incorporate an integrated, maintenance-free electric motor and offer significant benefits, including compact dimensions, low noise and high efficiency. HFTE Series drives are designed for use with all kinds of aerial platforms and other types of mobile machinery, for indoor and outdoor use. This advanced powertrain solution uses a two- or three-stage gearbox offering reduction ratios of up to 1:153 to satisfy the widest possible range of needs. The gearbox is coupled with a low-voltage induction motor (BT Series), specially developed for traction power and control applications. Key features Two- or three-stage planetary drive with reduction ratios of up to 1:190 Optimized gear design for maximum efficiency and minimum noise Integrated, low voltage, 3 phase induction motor with inverter Integrated, high accuracy, KTY temperature sensor High resolution, Hall effect speed sensor Specifications Torque range 1000 ... 36,000 Nm
Elite HFTE planetary drives incorporate an integrated, maintenance-free electric motor and offer significant benefits, including compact dimensions, low noise and high efficiency. HFTE Series drives are designed for use with all kinds of aerial platforms and other types of mobile machinery, for indoor and outdoor use. This advanced powertrain solution uses a two- or three-stage gearbox offering reduction ratios of up to 1:153 to satisfy the widest possible range of needs. The gearbox is coupled with a low-voltage induction motor (BT Series), specially developed for traction power and control applications. Key features Two- or three-stage planetary drive with reduction ratios of up to 1:190 Optimized gear design for maximum efficiency and minimum noise Integrated, low voltage, 3 phase induction motor with inverter Integrated, high accuracy, KTY temperature sensor High resolution, Hall effect speed sensor Specifications Torque range 1000 ... 36,000 Nm
DDTG-55Z High Speed Tubular Linear Actuator The DDTG-55Z high speed electric linear actuator is a high-performance solution designed for applications that demand rapid and precise linear motion. With its advanced design and high-speed motor, it offers quick response times and accelerated speeds while ensuring precision and accuracy. This actuator is ideal for industries such as robotics, automation, and aerospace, where high-speed operation is critical for enhanced performance. Technical Data of DDTG-55Z Ultra High Speed Linear Actuator Model DDTG-55Z Input Voltage 12V or 24V or 36V or 48V material of outer tube AL 6063/stainless steels 304 material of lead screw stainless steels 304 material of piston rod stainless steels 304 material of the nut DuPont POM, USA Stroke Length 50500mm Motor Type brushed motor Max Load 400N (24V) / 250N(12V) Load Speed 80-90mm/s Limit Switch built-in Duty Cycle under max load,work for 50 times , stop for 20minutes15%-20%;under min load can work continuously Protection Class IP67 Operating temperature -20-60 ºC Wire length Custom Noise on load 60db Dimension of DDTG-55Z High Speed Tubular Custom Linear Actuator DDTG-55Z mm Limit Switch Hall Sensor Over Current Protection Min. install dimension L+S 325+S Pending Pending DDTG-55Z Fast Electric Actuator Customizable Options Wire length Stroke length Install dimension Color Bracket Control box Now the price of fast linear actuator 12v is reasonable, if you have needs, please contact us.
Product model: KY911 wear-resistant flux cored wire Product specifications: 1.2mm 1.6mm 15kg / box Post-weld hardness: HRC 65-70° Scope of application: It is suitable for high hardness and hard surface treatment of parts with high wear and high impact. It is suitable for surfacing welding with strong abrasion resistance. It has wide application range and high quality. Metal composition (%): C 3.00-6.00; Mn 2.00-3.00; B 5.00-8.00; Cr 20.00-25.00; Ni 2.00-3.00; Mo 2.00-3.00 Precautions: 1. Adopt DC reverse connection; 2. When welding, the flow rate of CO2 gas should be 20~25L/min; 3. The dry elongation of the wire should be controlled within the range of 15~25mm; 4. The temperature between the channels is recommended to be kept at around 300 °C; 5. Before welding, the weldment must be cleaned of rust, oil, moisture and other impurities. Precautions:   Precautions for use: The wear-resistant solder layer should generally be surfacing 1 layer. Because the number of layers is too much, the surfacing layer becomes brittle due to too high hardness and is easily broken after collision. Due to the high hardness, the welding wire has a cracking sound during the welding, and a small crack occurs, which is a normal phenomenon and does not fall off, and does not affect the service life.   We are a real wear-resistant welding consumables production factory, with a complete production process and inspection process, to provide you with high quality and cost-effective wear-resistant welding consumables.
Our 7.2KW tethered type 2 cable for EV is a high-quality, durable charging solution for electric vehicles. It offers a robust and fast charging capability, compatible with Type 2 EV inlets, and is designed for easy use and storage, providing efficient charging at home or commercial locations. Highlight Of 7.2KW Tethered Charger Cable for EV 7.2KW Power: Offers a high-power charging capability, allowing for faster charging times and efficient energy transfer to Type 2 electric vehicles. Type 2 Connector: Equipped with a type 2 tethered ev charger, compatible with a wide range of electric vehicles, ensuring versatility and convenience. Tethered Cable: The built-in tethered cable eliminates the need for an additional charging cable, providing a convenient and user-friendly charging experience. Safety Features: Incorporates advanced safety features such as overcurrent protection, short circuit protection, and built-in temperature sensors to ensure safe and reliable charging. Durable Design: Constructed with high-quality materials and designed for durability, offering a long-lasting and robust charging solution for electric vehicle owners. What Material Is the 7.2KW Tethered Charger Cable for EV Made Of At Religare Electric, our 7.2KW tethered type 2 charger is engineered using advanced TPU material, renowned for its excellence in the current market landscape. This cable adheres to the latest European Union standards, offering a lightweight and sleek design with exceptional durability and impressive resistance to low temperatures. We take pride in our ability to provide superior OEM services for purchasers of the Type 2 tethered charging cable worldwide. Leveraging our efficient manufacturing facilities, we optimize costs and elevate production quality to meet the diverse needs of our global clientele. For more information about types of circuit protection devices and zappi tethered charger cable length, please feel free to contact us!
Product Application: Applied to the first groove of aluminum pistons in internal combustion engines, primarily used in diesel engine aluminum pistons, with aftermarket sales predominating. Features: 1. Integration of Wear-Resistant Insert Rings with Internal Cooling Channels through brackets offers several advantages over pistons simultaneously using insert rings and salt cores: (1) Single positioning reduces operational and process difficulties and CT time, improving production efficiency. (2) Before casting, simple shot blasting and preheating of wear-resistant insert rings are sufficient, eliminating the need for separate treatment (3) Reduces quality loss caused by using salt cores, enhancing piston yield.(4) Decreases flushing procedures and costs associated with salt cores. (5) Minimizes wastewater handling and management. 2. Customized Design: Tailored design of bracket-type internal cooling channel wear-resistant insert rings to meet diverse piston and industry requirements, ensuring optimal adaptability. 3. Material: The wear-resistant insert rings are made of high-nickel austenitic cast iron, while aluminum pistons are typically made of silicon-aluminum alloy. Their similar coefficients of expansion form the basis for the application of wear-resistant insert rings in the first groove of pistons. Wear Resistance: High-nickel austenitic cast iron exhibits outstanding wear resistance, optimizing friction with piston rings at high temperatures, thereby increasing piston lifespan. Thermal Conductivity: The material boasts excellent thermal conductivity, facilitating heat transfer and dissipation to maintain piston head temperature within a reasonable range. Corrosion Resistance: Strong corrosion resistance enables adaptation to various working environments, ensuring stability under different conditions. Environmental Friendliness: Prolonging piston lifespan ensures combustion chamber sealing during piston operation, enhancing combustion efficiency, and reducing exhaust emissions. Precision Machining: Precise machining techniques during manufacturing ensure products meet design requirements, enhancing performance.
Product Application: Used in the first groove of aluminum pistons in internal combustion engines, initially applied to diesel engine aluminum pistons, with wear-resistant insert rings widely used and promoted on gasoline engine aluminum pistons in recent years as industry demands for gasoline engine pistons have increased. Features: Compared to traditional aluminum pistons, pistons with insert rings have seen an average increase in lifespan of 5-8 times, enhancing energy utilization and combustion efficiency, while reducing emissions. Additionally, it significantly improves the performance and reliability of internal combustion engines. Material: The wear-resistant insert rings are made of high-nickel austenitic cast iron, while aluminum pistons are typically made of silicon-aluminum alloy. Their similar coefficients of expansion form the basis for the application of wear-resistant insert rings in the first groove of pistons. Wear Resistance: High-nickel austenitic cast iron exhibits outstanding wear resistance, optimizing friction with piston rings at high temperatures, thereby increasing piston lifespan. Thermal Conductivity: The material boasts excellent thermal conductivity, facilitating heat transfer and dissipation to maintain piston head temperature within a reasonable range. Corrosion Resistance: Strong corrosion resistance enables adaptation to various working environments, ensuring stability under different conditions. Environmental Friendliness: Prolonging piston lifespan ensures combustion chamber sealing during piston operation, enhancing combustion efficiency, and reducing exhaust emissions. Precision Machining: Precise machining techniques during manufacturing ensure products meet design requirements, enhancing performance.
The new Onan QG 2800i / 2500i LP is a high efficiency gasoline generator with reduced noise and vibration levels, while providing a returnless EFI system to improve performance bration and noise Variable-speed Generator Less noise and vibration and lower fuel consumption Three-point isolation mounts and integrated flex coupling on the muffler Reduce vibrations felt inside of RV Maintenance and operation Oil level and pressure monitoring No daily oil check necessary 40% larger oil capacity Greater cooling capacity Inverter control Prevents nuisances circuit breaker tripping Electronic fuel ignition No carburetor varnishing and monitoring generator functions on OEM status display panels Fuel and efficiency Variable speed Slows the generator down to improve fuel efficiency and moderate operating loads Oil and inverter temperature sensors Shut down generator to protect equipment if oil or inverter exceed recommended range 9% lighter than previous model Increases cargo capacity Available in gas or LP (propane) models Provides fuel flexibility and can eliminate the need for alternative fueling tanks Computer-controlled variable speed operation matches engine speed to load demand, minimizing noise level and vibration. LP and EFI gasoline models No fuel return line necessary - EFI gasoline EVAP model for specialized applications High power quality with inverted electrical output for sensitive RV loads. J1939 communications capable Increased oil capacity, reduced oil consumption, low oil shutdown switch, high oil temperature sensor, allows for no required oil checks between recommended oil changes. Quietest generator sets of their size. Completely enclosed with muffler, quick and easy to install. 3-year limited warranty Low fuel consumption
PRODUCT DESCRIPTION: Place of Origin: China Brand Name: SUOYI Model Number: SY-SiC02 Shape: black and green powder Material: quartz sand Chemical Composition: Ti,C Product name: silicon carbide Color: black or green Molecular weight: 40.096 Melting Point: 2700 â?? Density: 3.22 g/cm�³ Water soluble: Insoluble in water Molecular formula: SiC CAS: 409-21-2 EINECS: 206-991-8 Brand Name: SUOYI Packaging Details: 25kg/barrel or customized Supply Ability: 10 Metric Ton/Metric Tons per Month APPATION: â?´ As an abrasive, it can be used to make abrasive tools, such as grinding wheels, oil stones, grinding heads, sand tiles, etc. â?µ As metallurgical deoxidizer and high temperature resistant material. â?¶ High-purity single crystal can be used to manufacture semiconductors and silicon carbide fibers. Main uses: used for wire cutting of 3-12 inch monocrystalline silicon, polycrystalline silicon, potassium arsenide, quartz crystal, etc. Engineering processing materials for solar photovoltaic industry, semiconductor industry, and piezoelectric crystal industry. Used in semiconductors, lightning rods, circuit components, high temperature applications, UV detectors, structural materials, astronomy, disc brakes, clutches, diesel particulate filters, filament pyrometers, ceramic membranes, cutting tools, heating elements, nuclear fuel , jewelry, steel, protective gear, catalyst carrier and other fields.
PRODUCT DESCRIPTION: Place of Origin: China Brand Name: SUOYI Model Number: SY-SiC02 Shape: black and green powder Material: quartz sand Chemical Composition: Ti,C Product name: silicon carbide Color: black or green Molecular weight: 40.096 Melting Point: 2700 â?? Density: 3.22 g/cm�³ Water soluble: Insoluble in water Molecular formula: SiC CAS: 409-21-2 EINECS: 206-991-8 Brand Name: SUOYI Packaging Details: 25kg/barrel or customized Supply Ability: 10 Metric Ton/Metric Tons per Month APPATION: â?´ As an abrasive, it can be used to make abrasive tools, such as grinding wheels, oil stones, grinding heads, sand tiles, etc. â?µ As metallurgical deoxidizer and high temperature resistant material. High-purity single crystal can be used to manufacture semiconductors and silicon carbide fibers. Main uses: used for wire cutting of 3-12 inch monocrystalline silicon, polycrystalline silicon, potassium arsenide, quartz crystal, etc. Engineering processing materials for solar photovoltaic industry, semiconductor industry, and piezoelectric crystal industry. Used in semiconductors, lightning rods, circuit components, high temperature applications, UV detectors, structural materials, astronomy, disc brakes, clutches, diesel particulate filters, filament pyrometers, ceramic membranes, cutting tools, heating elements, nuclear fuel , jewelry, steel, protective gear, catalyst carrier and other fields.
Hphygienic series tanks are accumulator tanks designed to work in systems with heat pumps, gas condensing boilers, solar collectors, and other energy sources. They function as both a buffer tank and a hot water heater. This tank, through layered heat storage, allows for the quick and cost-effective production of hot water. Safe operation. The heat exchanger is made of corrugated stainless steel tubing, ensuring hygienic hot water preparation. Due to the turbulent water flow on the heat exchanger's surface, calcium does not accumulate, and there is no formation of Legionella bacteria in the water. It does not require high-temperature heating to combat bacteria, as in traditional heaters. Efficient heating. The large heat exchanger with an area of up to 9m3, distributed throughout the height of the tank, guarantees high efficiency in heating hot water. The upper part of the heat exchanger ensures instant hot water supply, while the lower part is responsible for preheating the water and cooling the tank itself. The lower temperature in the lower part of the tank is very beneficial when working with heat pumps and condensing boilers. Convenient installation. Space-saving installation of the system by combining different sources into one unit. Removable insulation allows the tank to fit into a smaller door space. In conclusion, the Hphygienic series of tanks offers a range of significant benefits for efficient and hygienic hot water preparation. With a large heat exchanger, these tanks ensure high heating efficiency and instant hot water supply. The design allows for convenient installation, saving space and providing flexibility in placement. What's more, this series offers a variety of models to choose from, competitive pricing, and a host of other features that make it a reliable choice for your hot water needs. And to provide you with added peace of mind, these tanks come with a generous 5-year warranty, ensuring quality and durability for years to come. The price is retail and is subject to discounts based on the order volume.
Product Name: Chromite Ore Chemical Formula: FeCrO (Iron Chromium Oxide) Origin: Balochistan, Pakistan Description: Chromite is a high-grade natural ore containing chromium and iron, crucial for the production of stainless steel, ferrochrome, and various industrial alloys. Sourced from the rich mineral deposits in Balochistan, Pakistan, our chromite is known for its high purity, consistent quality, and reliable performance in a wide range of industrial applications. Key Features: High Chromium Content: Our chromite ore boasts a high concentration of chromium (typically 45-55%), making it an excellent choice for producing high-quality ferrochrome, which is essential in the manufacturing of stainless steel and other corrosion-resistant alloys. Purity and Quality: The ore is carefully extracted and processed to ensure minimal impurities, such as silica and alumina, which can affect the efficiency of smelting operations. Metallurgical Properties: Balochistan chromite is valued for its favorable smelting characteristics, including its ability to produce a stable and high-grade alloy with optimal recovery rates of chromium during the smelting process. Applications: Ferrochrome Production: The primary use of chromite ore is in the production of ferrochrome, an essential component in the manufacture of stainless steel. Refractory Material: Due to its high melting point and stability, chromite is used as a refractory material in high-temperature furnaces, kilns, and incinerators. Chemical Industry: Chromite is utilized in the production of chromium chemicals, including chromium salts and oxides, which are used in pigments, metal plating, and leather tanning. Foundry Sands: The high heat resistance of chromite makes it suitable for use as a molding sand in foundry applications. Physical Characteristics: Color: Typically metallic black or brownish-black. Hardness: 5.5 on the Mohs scale, indicating good durability. Specific Gravity: 4.5 to 4.8, reflecting its high-density nature. Grades and Specifications: CrO Content: Typically 45-55% SiO Content: Low levels, generally under 5% AlO Content: Less than 10% Size: Available in various sizes, from fine particles to larger lumps, depending on customer requirements. Quality Assurance: Our chromite ore undergoes stringent quality control measures to ensure it meets international standards. The ore is tested for its chemical composition, size distribution, and physical properties to guarantee optimal performance in end-use applications. Packaging and Delivery: Available in bulk shipments, bagged loads, or custom packaging to suit client needs. We ensure secure packaging and timely delivery to locations worldwide. Availability:
ZM-R720A LED/Micro Component Rework Station ZM R720A mini/micro BGA rework station is a precision optical intelligent LED rework station suitable for the rework of precision microdevices. This machine adopts imported HD CCD digital imaging, automatic optical zoom system, rework of precision microdevices, carbon fibre infrared BGA heating tube, and automatic feeding. Besides that, Seamark also has other types of BGA led rework stations for you to choose from. Functions of R720A Micro/Mini BGA Rework Station 01 Carbon Fiber Infrared Heating Tube The IR preheating zone uses carbon fiber infrared tube heating and high temperature resistant microcrystalline panel protection, and a multi-functional movable PCB fixing bracket. 02 Precision Tiny Devices and Automatic Feeding Seamark dedicated to the repair equipment of precision micro devices, automatic feeding device, optional LED feeder feeding fixture. 03 High Definition Display Using imported high-definition CCD (2m pixels) digital imaging system with automatic optical zoom, automatic control laser red-dot precision alignment, using 15' HD industrial display screen. As one of the top BGA Rework Station suppliers in China, Seamark ZM is famous for its rich technical force, complete detection means, reliable quality, good service. If you want to know the micro BGA LED rework station and to get a perfect kind of repair machine for your factory, please contact Seamark ZM first. Specification Of ZM R720A Micro/Mini BGA Rework Station Power Supply AC220V±10% 50/60HZ Power 6.15KW(Max), Top heater(1.45KW) Bottom heater (1.2KW), IR Preheater (3.2KW),Other(0.3KW) PCB Size 412*370mm(Max); 6*6mm(Min) BGA Chip Size 60*60mm(Max);0.6*0.6mm(Min) IR Heater Size 380*280mm Temperature Sensor 1 Operation Method 7" HD touch screen Control System Autonomous heating control system V2ï¼?software copyrightï¼? Display System 15" HD industrial display ( 1080P 16:9) Alignment System 2 Million Pixel HD digital imaging system, automatic optical zoom with laser red-dot indicator Vacuum Adsorption Automatic Alignment Accuracy ±0.01mm Temperature Control K-type thermocouple closed-loop control with accuracy up to ±1 Feeding Device Yes Positioning V-groove with universal fixture Dimensions L810*W635*H870mm Weight 84.5KG As an x ray inspection machine manufacturer, we can provide kinds of china inline x ray machine for sale, if you have needs, please contact us.
Professional HIFU-Q3 New arrival skin tightening focused ultrasound anti-wrinkle face hifu 7d facial and body. Model:HIFU-Q3 Working Theory: High Intensity Focused Ultrasound (HIFU) directly delivers heat energy to skin and subcutaneous tissue that can stimulate and renew the skin's collagen and thus consequently improving the texture and reducing sagging of the skin. It literally achieves the results of a facelift or a body lifts without any invasive surgery or injections, moreover, an added bonus of this procedure is that there is no downtime. This technique can be applied to the face as well as the whole body, and also, it works equally well for people of all skin colours, in contrast to that of lasers and the intense pulse lights. HIFU machine is a non surgical and a non laser procedure that directs high intensity focused ultrasound, also known as HIFU knife into the deep skin layer in order to gently heat the tissue to lift and tighten aged skin without any incisions of disrupting skin surface. HIFU technology is able to transfer the heat energy into 3-4.5mm under the surface of the skin. It will heat the SMAS up to 60-70 temperature the raises thermal coagulation point which accelerates skin rejuvenation process and maximizes tightening effect of the skin layer. How it works? Advanced High Intensity Focused Ultrasound(HIFU) adopts technology which is not like lasers, radio frequency, surgery and other technologies, HIFU is non-surgical. HIFU steer around the surface of the skin to deliver the precise and fractional of ultrasound energy at the right depths(i.e.3.0mm/ 4.5mm SMAS layer) without damaging or disrupting the epidermal tissue of skin and the right temperature 65~70ºC.This energy stimulates the new collagen to reproduction, which rejuvenates the skin leading to a more youthful and bright or to sharpen contouring. HIFU is especially suitable for treating sagging skin with reasonable thickness as well. Machine Advantages: 1. Non-Invasive treatment both for face and body with different cartridge; 2. Adopts HIFU technology, the temperature of focused ultrasound can reach 65 ºC to 100 ºC; 3. Security control system can distinguish different cartridge automatically; 4. Special Cartridge connect method make sure no energy loss during the treatment; 5. Professional mode with free setting parameter and memory function for saving data; 6. Smart mode with limited energy and preset parameters for simple and safe treatment; 7. Uniform energy distribution brings better clinical effect and quickly treatment; 8. Cartridge with long life span of 10,000 shots; 9. HIFU-Q3 has 2 extra transducer 8mm and 13mm,which give you an option for body treatment: body tightening ,lifting and slimming.