Plastomeric waterproofing cover with APP (Atactic polypropylene) spunbond polyester felt carrier on both sides polyethylene coated Usage areas Water and steam insulation of wet spaces. Terrace and sloping roofs. Pressurized groundwater problems. Retaining wall and basement walls. Rain gutters, balconies, flowerpots, concrete canal interiors and garden terraces, water tanks, ponds, sewage treatment plants, parking, hidden creek insulations Advantages It has high flexibility. It is based on building movements and expansion differences. Dilatation, chimney bottom, parapet return details such as easily applied. The building lasts its lifetime. It can be applied on different types of floors. It provides waterproofing regardless of the technical characteristics of the floor and receives only mechanical support from the underlying carrier. The amount of void in the concrete, cracks on the surface, dusting rate do not affect the waterproofing properties. It has high tensile-breaking strength thanks to polyester felt as carrier. It is based on building movements, subsequent cracks, and the amount of expansion of different materials in filters and parapets. No additional material is required for dilatations. The amount of use can be clearly determined before application. It is not affected by differences in outdoor weather conditions and chemical additives inside. Technical specifications are standard. Storage and Protection Rolls should be stored and transported vertically. It should not be exposed to ultraviolet rays and sudden changes in temperature. After application, no drilling and cutting operations should be performed. The terraces to be visited should be protected with floor covering. Method of Application With torch flame 10 cm at the joints, 15 cm at the roll ends. It is applied in full, dotted or free form as a share of one thousandth.
Stony Roof Covering Polymer bitumen, colored granule coated waterproofing membranes, waterproof of sloping roofs, Lightweight, economical and long lasting solutions.
OSO Geotextiles, also known as geotextiles, are permeable geosynthetics made of synthetic fibers by needling or knitting. Geotextiles are one of the new geosynthetics with characters like: high strength, corrosion resistance, water permeability, good resistance to microorganisms and convenient for construction. Geotextiles are divided into woven geotextiles and non-woven geotextiles. Specification Weight: 100g-800g/m2 Width:2-8m Length: 50-100m Material: PP, PET
It can protect your insulation from mold and rot. Let the house breathable freely. Test items/unit Index Specification1.5mX50m Thickness 0.30mm Vapor transmission rat1000g/m2.24h Watertightness500-2000mm water-column,2h,Impermeable Maximum tension(longitudinal)220N/50mm Maximum tension(transversal)111N/50mm Elongation at break(longitudinal)110% Elongation at break(transversal)100% Tear resistance(longitudinal)135N Tear resistance(transversal)100N Air oven aging test80 168h Maximum tension retention (longitudinal/transversal) 98%/87% Elongation retention at fracture (longitudinal/transversal) 72%/72% Anti-UV 4 months Flame retardant B1 Meterial:PP fabric+PP breathable film+PP fabric. Light weight,easy to handle,UV and heat resistant,and fast to install,house wrap is pliable,so it readily wraps around corners,interfaces at joints,and wraps over unique architectural geometries.
Test items/unit Index Specification1.5mX50m Thickness 0.30mm Vapor transmission rat 1000g/m2.24h Watertightness500-2000mm water-column,2h,Impermeable Maximum tension(longitudinal) 220N/50mm Maximum tension(transversal) 111N/50mm Elongation at break(longitudinal) 110% Elongation at break(transversal) 100% Tear resistance(longitudinal) 135N Tear resistance(transversal)100N Air oven aging test80 168h Maximum tension retention (longitudinal/transversal) 98%/87% Elongation retention at fracture (longitudinal/transversal) 72%/72% Anti-UV 4 months Meterial:PP fabric+PP breathable film+PP fabric. Light weight,easy to handle,UV and heat resistant,and fast to install,house wrap is pliable,so it readily wraps around corners,interfaces at joints,and wraps over unique architectural geometries.
Polymer-cement waterproof coating is a kind of two-component waterproof coating composed of synthetic polymer emulsion and various additives, which is composed of liquid and matching powder. It is a kind of waterproof material with high elasticity of synthetic polymer materials and good durability of inorganic materials. It has the characteristics of rigidity and flexibility, and has the extensibility of polymer coating film, water repellency, and high strength of hydraulic cementing material. Good water resistance, easy to wet base bonding Good flexibility, can resist the slight vibration of the building structure and a certain degree of displacement, and can be applied on the wet base and firmly bonded Water-based materials, non-toxic and harmless, non-polluting are environmentally friendly mater.
Polyester linoleum base fabric is a kind of non-woven fabric, which can also be called: tire base fabric, linoleum base fabric, waterproof base fabric. Polyester linoleum base fabric is a non-woven fabric product which is processed by carding, acupuncture reinforcement and dipping and setting of 100% polyester staple fiber . The shape is cloth type. It is made of high-strength fiber and has the characteristics of high tensile strength, corrosion resistance, aging resistance, high temperature resistance, good thermal stability, good permeability and large elongation. It is the first choice for producing modified asphalt waterproofing membrane. It mainly used in construction building construction, roofing engineering, underground engineering, bridge deck engineering, waterproofing of water storage tank, moisture proof and anti-corrosion of building foundation.
Product Description -What is geomembrane? A geomembrane is very low permeability synthetic membrane liner or barrier used with any geotechnical engineering related material so as to control fluid (or gas) migration in a human-made project, structure, or system. Geomembranes are made from relatively thin continuous polymeric sheets, but they can also be made from the impregnation of geotextiles with asphalt, elastomer or polymer sprays, or as multilayered bitumen geocomposites. Continuous polymer sheet geomembranes are, by far, the most common. -Raw material- Imported virgin resin( Saudi Arabia or Qatar); Sinopec virgin resin; Recycled material. - Application - 1. Environmental protection, sanitation (such as solid waste landfills, sewage treatment plants, power plants Chi-conditioning, industrial, hospital solid waste, etc.) . 2. Water (such as rivers, lakes and reservoirs of the anti-dam, plugging, reinforcement of the canal seepage, the vertical wall of the heart, slope protection, etc.). 3. Municipal Engineering (subway, on the ground floor of the building, planted roof, the roof garden of anti-seepage, sewage pipes lining, etc.). 4. Landscape (man-made lake, river, reservoir, golf courses reservoirs of the substrate, slope protection, green lawn of the waterproof moisture, etc.) 5. Petrochemical (chemical plants, oil refineries, gas storage tanks of the anti-chemical reaction tanks, sedimentation tanks of the lining, etc.). 6 .Mining (washing and pool heap leaching, the ash-field, dissolved, precipitation, the yard, the tailings seepage substrates, etc.)
How About PP(Polypropylene) Continuous Filament Geotextile? Polypropylene Continuous Filament Geotextile Performance (1) polypropylene density is small, only 0.91 g / m3 (polyester is 1.38 g / m3), so the polypropylene geotextile than polyester geotextile, under the same strength, with a greater coverage area. (2) the special structure of polypropylene to make it has excellent acid and alkali resistance, especially alkali resistance is better than polyester, in the soil alkaline strong underground protection, strengthening, waterproof, anti-seepage and other projects When the effect is better than polyester. (3) polypropylene fiber surface friction coefficient is small, the friction between the fibers is small, and good wear resistance, anti-vibration friction performance is much better than polyester. Application: 1.Filtration of soils in drainage applications by retaining soil particles while allowing for the free flow of water 2.Separation and reinforcement in road and railway construction 3.Prevention of soil movement in erosion control measures 4.Cushioning and protection in many containment projects Specification 1. Weight Type: 80GSM -- 1500GSM 2. Width: Max 6 meter , the length as client`s request 3. Color: White, Black, Gray, Brown... 4. Package: Paper Core, Waterproof Membrane and Plastic Woven Fabric 5. Loading details: 20ft container, 40ft High Container Geotextiles Advantages:1. Isolation 2 .Filter 3 Drainage 4 Reinforced 5 Protection 6. Closed 1. Isolation The use of geotextile different physical properties (particle size, distribution, density and thickness, etc.) materials (such as soil and sand and gravel soil, soil and concrete, etc.) for isolation. So that two or more materials are not loss of inter-and non hybrid,to maintain the overall structure of the material and functions of the structures is to strengthen the load bearing capacity. 2 .Filter When the water from fine materials into the soil layers of rough material, the use of acupuncture geogextile good air and water permeability, so that the water flow through, and effective interception soil particles, spinning, the small stone so as to maintain the stability of the soil and water projects. 3 Drainage Acupuncture geotextile is a good hydraulic material, which can from a soil internal drainage channel, soil structure and excess liquid gasemissions.
Product Description The geocell geosynthetic cellular confinement system is a matrix of lightweight, expandable and flexible thermoplastic strips that are ultrasonically bonded to form a strong, dimensionally stable and inert honeycomb structure. The geocell is honeycombed three-dimensional grid structure which is welded by high-strength HDPE sheet. The geocell is easy to stretch. It can be folded up when transport and opened to fill the earth or concrete when use it. It will constitute a strong lateral and large stiffness of the structure when use it. In the geotechnical engineering, soil, sand, stone, concrete and other fill together constitute a different cohesion, different reinforcement strength, different depth of the cushion. The cushion can be placed in the required position accordance with the requirements of the project for Reinforcement of roads, railways and soft soil foundation, slope protection, green structure, the construction of retaining walls and so on. The most important feature is can solve and complete a variety of difficult problems which can be dealed with use conventional method in geotechnical engineering,such as bridge jumping, soft base subsidence, fouling, landslides and desert subgrade. Concrete construction method 1.Open the superimposed geocell. 2.Fixed with nails or connected with the framework of stretching device. 3.Fill the particle filler until the full and beyond standard room to the top, then vibrate or roll to finish the primary work. 4.At this point, cell chamber system can support all kinds of construction equipment. The construction can be done directly in the above. Payment Type: L/C,T/T,Paypal,Money Gram,Western Union Incoterm: FOB,CFR,CIF,FCA,CPT,CIP Min. Order: 1000 Square Meter Delivery Time: 15 Days
Polyethylene(PE) takes the name of ethylene which is in the form of monomer. With several methods of polymerization, Ethylene becomes Polyethylene. Ahed HDPE Geomembrane is a geosynthetic liner which is formed as a result of extrusion of high density polyethylene and shaped homogenously by calender system. It can be used in all projects where impermeability is required. Types: HDPE Flat Geomembranes HDPE one-side textured geomembranes HDPE two-side textured geomembranes LDPE geomembranes LLDPE geomembranes VLDPE geomembranes HDPE T-Grip geomembranes HDPE Discrete T-Grip geomembranes HDPE one-side geotextile laminated geomembrane Use Locations: Landfills Waste water repository and treatment Drainage pits for collecting leakage of gold and other mines Oil tanks and oil fields Sedimentation ponds Fertilizer pits Building foundations, if needed Irrigation ponds Tunnels Irrigation canals Bioenergy generation plants Product Featurus High resistance to chemicals UV resistant Less friction rate because of the textured layer Highly resistant to organic and inorganic solvents Profoundly resistant to the fractures Resistant against natural conditions Resistant to punctures and cracks Low permeability Higher tensile strenght
Ahed PVC Geomembranes are geosynthetic liners manufactured from PVC resin and other synthetic raw materials and used in waterproofing applications. Ahed PVC geomembranes have different types for different applications such as for pools, tunnels, irrigation channels, pipes, building foundations, terraces and water reservoirs. Use Locations Building Foundations Dams, transmission tunnels Roofs and terraces Carparks Waste water treatments Pools Pond for agricultural irrigation purposes Potable water reservoirs Underpasses Highway, railway tunnels Subway stations and tunnels Irrigation canals Product Features: Resistant to plant roots. Can be recycled. Resistant to temperatures between -40C and +70C. Joints are welded with welding robots which can do double inlet welding. Resistant to aging and corrusion. Enclosed class E� in combustion, no flame occurs. Long life span. High resistance to mechanic shocks. High performance in tensile strenght, elongation and elasticity. Keeps high eleasticity in cold weather conditions, never cracks. Can be manufactured as lamination with geotextile fabric; UV beam resistant, signal layered (OPTIONAL). Since it is loose laid, it is affected at the minimum degree as a result of movement in construction. Different colour and dimension options. UV RESISTANT PVC GEOMEMBRAN: It is made of PVC. Since it is manufactured as UV Beam Resistant, it is called Pond Type� Geomembrane. Because of UV additive, it is direct sun beam resistant for ages. That kind of AHED PVC Geomembrane is comfortabely used without coating the surface of it. It is manufactured in gray, blue, yellow colours. AHED PVC GEOMEMBRANES are manufactured in a width of 2,10m; standard lengths of 20m&25m; with thicknesses of 1,00mm & 1,20mm & 1,50mm & 2,00mm & 2,50mm & 3,00mm. When it is demanded, they are manufactured in optional lengths.
Specifications Type: Shoe Fabric Place of Origin: Fujian, China (Mainland) Brand Name: kinghope Model Number: FIS-XXX material: nonwoven fabric thickness: 0.9mm-3.0mm specification: 36"*54",1y*1.5y color: white or others certificate: ISO9001-2002 business type: manufacture experience: more than 20 years web: www.cn-zhh.com skype: zhhshoes3 Packaging & Delivery Packaging Details: 20-25pcs/bag Delivery Detail: 3-7days stripe insole board despriction Thickness: 1.25mm, 1.5mm, 1.75mm, 2.0m or customize Specification: 36â?� X 54â?� or customize Color:White, black and others Functions: 1. Durable, keep in shape, keep no stinking 2. Good for one's health, Help for one's blood circulation. 3. Wearable, well ventilated, Environment-friendly, hygienic. Without azobenzene or heavy metal. Good elasticity, Good breaking resistance, comfort. Applications: Mainly used for innersole of sports and leather shoes, the board of briefcase and suitcase. Our main market Europe, Middle east, Southeast of Asia,centre south Americen and so on Price: FOB USD 0.9~1.5 / Piece Minimum Order Quantity: Negotiable Trial Order Minimum Order Quantity: 2000 Piece/PiecesTrial Order Port: Xiamen Packaging Details: 25 sheets packed in a poly bag. Delivery Time: 3-7 days after receive your 30% deposit. Payment Terms: L/C,T/T Supply Ability: 25000 Piece/Pieces per Day
Specifications Type: Shoe Linings Place of Origin: Fujian, China (Mainland) Brand Name: Kinghope Model Number: NWNPK Material: 100% Polypropylene Facotory location: Wuli industry zone,Jinjiang city Factory size: 20,000 meter squre Sample: free sample Our market: all over the world Color: white or others Skype: zhhshoes3 Width: 58/60" Weight: 25gsm-300gsm Packaging & Delivery Packaging Details: in roll Delivery Detail: 3-7 days PP spunbonded nonwoven fabric Specification:25g/m²-300g/m², Width:Customize Color:Black,White,Red or customize Functions: Good breaking resistance,High tensile Applications: polyester pp non woven fabricMainly used as lining of shoes, recyclable bags, lining of cushion etc. Fabric-like material made from long fibers, bonded together by mechanical treatment. It is used in the textile manufacturing industry to denote fabrics, such as felt. Nonwovens have become an alternative to polyurethane foam.
Specifications Type: Shoe Linings Place of Origin: Fujian, China (Mainland) Brand Name: Kinghope Model Number: NWSB-XXX Material: 100% Polypropylene Facotory location: Wuli industry zone,Jinjiang city Factory size: 20,000 meter squre Sample: free sample Our market: all over the world Color: black,white,red or custom made Skype: zhhshoes3 Size: 60g/m2-500g/m2 Thickness: 0.6mm-5.0mm Packaging & Delivery Packaging Details: in roll Delivery Detail: 3-7 days Specifications 1.Durable ,keep in shape ,keep no stinking 2.Good for health,Help for blood circulation 3.Environment friendly 4.Keep dry. About products : Application Scope: 1. As shoes interlining, shoes material, shoe pad, shoes insole sheet 2. As Toe puff, shoe counter, shoe lining, inner lining 3. As brief case inner lining, cushion interlining, suitcase interlining, ceiling interlining. Features: 1. Environmental-friendly. 2. 100% polyester non woven insole board. 3. ISO 9001:2002 Certification. 4. OEM, buyer's label available. 5. Breathable, wearable, strong breaking resistance, waterproof.
Specifications Type: Shoe Linings Place of Origin: Fujian, China (Mainland) Brand Name: Kinghope Model Number: NWNPK Material: pet Name: pk stripefor insole board shoe lining Facotory location: Wuli industry zone,Jinjiang city Factory size: 20,000 meter squre Key words: shoe lining,shoe inner lining,polyeser fabric Sample: free sample Our market: all over the world Color: gray or others Skype: zhhshoes3 Thickness: 1.25mm-2.0mm Size: 1.5y*30* Packaging & Delivery Packaging Details: roll packing in polyester bag Delivery Detail: 3-7 days pk insole board despriction Thickness: 1.25mm, 1.5mm, 1.75mm, 2.0m or customize Specification: 54"*30m Color:White, grey and others Functions: 1. Durable, keep in shape, keep no stinking 2. Good for one's health, Help for one's blood circulation. 3. Wearable, well ventilated, Environment-friendly, hygienic. Without azobenzene or heavy metal. Good elasticity, Good breaking resistance, comfort. Applications: Mainly used for innersole of sports and leather shoes, the board of briefcase and suitcase.
Innersole fiber Board insole shoe material Thicknes 0.45mm-4.5mm Size: By sheet 0.914M x 1.37M and 1.00M x 1.50M Color: Yellow, Pink, Beige, Black. As per Clientâ??s request OEM. Brand: We can print Client's own brand on the board Materials: It is made from good fiber, white and without defeat. Packing: By poly bag and by pallet are ok and outside with strong plastic bags. MOQ: 5000sheet Feature 1) Inflexibility: superfine inflexibility, not chapped or broken off for inflexion. 2) Waterproof: fit for different climates and all kinds of shoes. 3) Stability of dimensions: no deformation for high temperature, fit for modern automatic shoe-making industry. 4) Paste capability: good paste capability, easy to paste, convenient for manufacturing shoes and cases 5) Comfortable: made of plant fiber, with good ventilation, elastic, environment friendly. Applications: 1) Shoes industry: fit for leather shoes, gym shoes, leisure shoes and sandals. 2) Case and bag industry: lining for briefcases and suitcases. 3) Stationary: covers for file holders, schoolbags and notebooks. 4) Synthetic leather: base materials for PVC and PU plying-up. Minimum Order Quantity: Negotiable Trial Order Minimum Order Quantity: 5000 Sheet/SheetsTrial Order Port: XIAMEN Packaging Details: 25 sheets in a plastic bag Delivery Time: in 5-10 days after got 30% advance payment Payment Terms: L/C at sight, T/T Supply Ability: 10000 Sheet/Sheets per Day
Polyester geogrid is an excellent geosynthetic made from high modulus polyester yarns. Polyester geogrid has excellent heat resistance and good resistance to long term degradation. It has good rutting resistant performance under high temperature. Polyester geogrid has a compact woven fabric structure. This structure constitutes a grid reinforcement system which exerts strong adhesive forces on the subgrade. Polyester geogrid can effectively enhance the bearing capacity of ground. Compared with fiberglass geogrid and plastic geogrid, polyester geogrid has better performance. It has stronger adhesive force and better corrosion resistance. This product can effectively prevent soil erosion and water loss. Polyester geogrid is very flexible and easy to install. It is commonly used to reinforce the subgrade structure of railroad, subway and highway. Features: Light weight. High tensile strength. Strong adhesive force. Good reflective cracking resistance. Good fatigue cracking resistance. Good corrosion resistance. Good resistance to long term degradation. Applications: Extensively used in the railroad, subway and highway construction. Commonly used in the reinforcement of subgrade, roadbed, slopes, embankment and retaining walls.
Uniaxial geogrid is a kind of geosynthetics. This product is designed for roadbed and pavement improvement. It is characterized by a one-way stretch structure. This unidirectional structure forms a compact interlock system. Uniaxial geogrid has good flexural stiffness and high strength. It can effectively reinforce soil structure and prevent soil from displacement. Uniaxial geogrid largely increases the durability of subgrade structure and prolongs the road life. Uniaxial geogrid can greatly reduces aggregate fill thickness. It provides a cost-effective solution for civil engineering and geotechnical projects. Uniaxial geogrid is suitable for various soil types and climate conditions. It performs well in preventing slope and road from landslide and subsidence. Uniaxial geogrid is widely applied roadbed stabilization, pavement improvement, retaining wall and bridge abutment reinforcement. Features: High tensile strength. Small deformation. Good creep resistance. Good installation damage resistance. Good long term degradation resistance. Quick installation. Applications: Used in the reinforcement of soft soil, roadbed, pavement, retaining wall, slope, working platforms, parking lots, bridge abutments, embankment, and so on. Used in the paving of roads, railway, highway.
Biaxial geogrid is a type of geogrids. It is made from high polymer. Biaxial geogrid has high strength in both longitudinal and transverse direction. It is made through the process of extruding, sheet forming, punching and stretching. Biaxial geogrid has good bearing capacity. It can enhance soil structure and prevent soil erosion. This product is often used to prevent the road from reflective and fatigue cracking. Biaxial geogrid can effectively improve the long term durability of subgrade and greatly reduces road maintenance costs. Biaxial geogrid has good resistance to long term degradation. It is suitable for various applications, such as embankment reinforcement, wall reinforcement, soil stabilization, slope protection and other permanent load bearing foundation reinforcement. This is a common biaxial geogrid specifications list. Other specifications can be customized according to your specific requirements Features: Good bearing capacity. Stable aperture size. High elastic modulus. Small deformation. High junction efficiency. Quick installation. Low maintenance costs. Applications: Used in the reinforcement of parking lots, haul roads, landfills and airport runways. Used to enhance the bearing capacity of railways and highways, etc. Used to reinforce the durability of buildings and constructions. Used to prevent landslide and ground subsidence.
