Zbl-r800 concrete rebar/rebar locator is a multifunctional integrated rebar detector which can be used for testing the thickness of protective layers, measuring the diameter, location, and distribution of rebar as well as for detecting the corrosion content of a rebar. Features Multi function rebar detector = rebar locator + rebar corrosion detector; an economical and convenient device. This model features the worldâ??s first wireless onsite data transfer function for such a device and remote management is also available Data can be stored on a usb-thumb drive, great for field work This device can generate rebar distribution map and rebar corrosion potential contour graph. Powerful professional analysis-process software allows for the automatic generation of test reports.
Advantages: Bar-break feature guarantees fully ductile elongation. No reduction of the bar cross-section area. Material of the rebar coupler is No.45 steel. Working principle: 1,First,We use GQ50 rebar cutting machine to splice up the end of rebar. 2,Secondly,we use Upset Forging Parallel Thread Machine (BDC-Auto1 Machine) to forge the end of rebar. 3.Third, we use Parallel Thread Cutting Machine (LW-I500 Machine) to thread the ends of the rebar which have been forged. 4.Fourth,an upsetting coupler is used to link the two ends of rebar in parallel thread.
Standard Model:used in the occasion for connecting the steel bar in normal situation Different Diameter Model:used for connecting the steel bar in different diameters Flared Model:used for the steel bar which was hard to match Positive And Negative Screw Thread Model:used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted. Locking Nut Model:used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
This machine is the preparative machine for rebar connection in construction work. Its main function is to forging the end part of rebar to raise the rebar area and therefore enlarge the strength of rebar end. Parameter: Upset forging machine: Mode:BDC-Auto 1 Suitable Rebar size (mm):16-40mm Voltage: 380V/3 Phase/50Hz Nom. Upset Force (kN):2000 Dimensions (mm):1300*680*1400 Weight (kg):850KG Hydraulic Pump: Mode:XB6.3/80 Nom. oil Pressure (Mpa):80-90 Nom. Flow (L/min):10.00 Power of Main Motor (kw):7.5 (380V/3 Phase/50Hz Or Customized) Dimensions (mm):800*550*900 Weight (kg):150KG
This machine is used to cut tmachinehe thread for rebar end after cold forging.And it can also be used for thread rolling as well as bolt length above 500mm,unlimited length bolts. Parameter: Rebar diameter range: 16-40 Output speed Reducer:62r/min Electric motor power:5.5KW Water pump motor power: 0.15KW Cutting head movement distance:150mm Or unlimited Out dimension(mm):1700*1000*1400mm Weight:1200Kg
This machine is used to cut the thread for rebar end after cold forging.And it can also be used for thread rolling as well as bolt length above 500mm,unlimited length bolts. Parameter: Rebar diameter range: 16-40 Output speed Reducer:62r/min Electric motor power:5.5KW Water pump motor power: 0.15KW Cutting head movement distance:150mm Or unlimited Out dimension(mm):1700*1000*1400mm Weight:1200Kg
Introduction Hebei Yida Anti Impact Rebar Coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the High Speed Tensile test of Anti instant impact by Germany Berlin BAM Laboratory. It has been widely applied at the sites where required high level of resistance to impact. The coupler sleeve will be perfect connected with rebar by cold swaged deformation in the application, and dual couplers will be connected by a high strength bolt.Its size can be from 12mm into 40mm different diameter bars. Special Advantages: (1)Each rebar is connected by cold swaged with a coupling, It was processed by large-tonnage hydraulic machine and unique split mould to ensure high quality and reliable radial deformation swage. (2)Rebar sleeve bond press is done prior to site connection saving precious site time. (3)The two sleeves are connected through a high-strength bolt, quality ensured. (4)Installation on site is easy and fast, even in dense cages. No X-ray check is needed and installation can be done in any weather conditions. (5)No thread cutting, no need heat or pre-heat on rebar, hence the rebar retains its original characteristics after splice. (6)The Yida ACJ rebar coupling system stands complex or full tension as well as full compression state. Application Guide: Proper installation is very important to ensure the design load will be reached in the application. Yida strongly recommends that the installation and site quality check be done according to the required guidelines and dimensions. Site installation method Step 1:Screw the bolt into female coupler swaged with rebar, till unable to screw continually. Step 2:Screw another side of bolt into the other sleeve after swaged with rebar, till unable to screw continually. Step 3:With help of two pipe wrench, tighten the connection by turning both rebar / couplers in opposite direction at the same time.
Hebei yida anti impact rebar coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the high speed tensile test of anti instant impact by germany berlin bam laboratory. It has been widely applied at the sites where required high level of resistance to impact. The coupler sleeve will be perfect connected with rebar by cold swaged deformation in the application, and dual couplers will be connected by a high strength bolt.Its size can be from 12mm into 40mm different diameter bars. Special advantages: (1)each rebar is connected by cold swaged with a coupling, it was processed by large-tonnage hydraulic machine and unique split mould to ensure high quality and reliable radial deformation swage. (2)rebar sleeve bond press is done prior to site connection saving precious site time. (3)the two sleeves are connected through a high-strength bolt, quality ensured. (4)installation on site is easy and fast, even in dense cages. No x-ray check is needed and installation can be done in any weather conditions. (5)no thread cutting, no need heat or pre-heat on rebar, hence the rebar retains its original characteristics after splice. (6)the yida acj rebar coupling system stands complex or full tension as well as full compression state. Application guide: Proper installation is very important to ensure the design load will be reached in the application. Yida strongly recommends that the installation and site quality check be done according to the required guidelines and dimensions. Site installation method Step 1:screw the bolt into female coupler swaged with rebar, till unable to screw continually. Step 2:screw another side of bolt into the other sleeve after swaged with rebar, till unable to screw continually. Step 3:with help of two pipe wrench, tighten the connection by turning both rebar / couplers in opposite direction at the same time. -
Advantages: Bar-break feature guarantees fully ductile elongation. No reduction of the bar cross-section area. Material of the rebar coupler is No.45 steel. Working principle: 1.First,We use GQ50 rebar cutting machine to splice up the end of rebar. 2.Secondly,we use Upset Forging Parallel Thread Machine (BDC-Auto1 Machine) to forge the end of rebar. 3.Third, we use Parallel Thread Cutting Machine (LW-I500 Machine) to thread the ends of the rebar which have been forged. 4.Fourth,an upsetting coupler is used to link the two ends of rebar in parallel thread.
Product parameter: The GL-12 Rebar Material Organizer & feeder Machine is widely cooperated with rebar automatic cutting,rebar upset forging,rebar thread cutting as well as thread rolling procedure,saves labor force and higher working efficiency in construction rebar mechanical splice technology .Its product design is compact,flexible and effective; and the unit size is 4m*3m*1.5m, which realizes the decomposition of the whole bundle of 16-40 rebars, the lateral displacement of the single rebar, the longitudinal fast forward, feeding and fast backward in work area and the second lateral displacement to the reservior. Use the Siemens frequency converter to regulate the moving speed. The cylinder controls the inverting and feeding of the material. The feeding speed is 0.5m/s. Product features: 1.The equipment is very flexible to use and with widely scope application. The bottom bracket of GL-12 Rebar Material Organizer & Feeder Machine is detachable and equipped with adjustable anchor feet, which can adapt to different height of equipments application. The equipment adopts the design of application expansion and it is easy to combine and lengthen. It can adapt to rebars of varying length and various processing equipments as well as flexibly transmitting the rebar. The rebar material organizer is widely used in construction, expressway, nuclear power plant and other industries and applies to organizing and conveying the rebars of various specification and varying length. Well-designed and efficient and durable We adopt the well-known brand motor and gear reducer to ensure product's durability. Use Siemens frequency converter to regulate the moving speed can effectively reduce the assistant machining time. The well-known brand large diameter cylinder to invert and feed is stable and durable. The specially designed turnover fixture is efficient and safe. The soft chain type collecting rack is well-adapted and capacious, and does little harm to rebar. Simple maintenance can ensure the normal operation as the simplified design can adapt to complicated processing environment, for which the purchase and use cost is low. Working Principle: Step1. Prepare rebars and use the crane to sling them on the shelf. Decompose the whole bundle of bars then can make the single ones lateral displacement. Step 2.Remove the single rebar to the working area by reversing device. The rebar can realize the the longitudinal fast forward, feeding and fast backward in this area. Step 3.Carry the rebar to the reservior through the second lateral displacement after processing and realize the storage function of rebar.
Application Guide: Proper installation is very important to ensure the design load will be reached in the application. Yida strongly recommends that the installation and site quality check be done according to the required guidelines and dimensions. Site installation method Step 1:Screw the bolt into female coupler swaged with rebar, till unable to screw continually. Step 2:Screw another side of bolt into the other sleeve after swaged with rebar, till unable to screw continually. Step 3:With help of two pipe wrench, tighten the connection by turning both rebar / couplers in opposite direction at the same time.
Ydzts-40c rebar taper thread cutting machine is designed and manufactured by hebei yida reinforcing bar connecting technology co., ltd. It is mainly used as a special equipment to make taper thread on the end of the rebar in the processing of rebar connection. Its applicable diameter is from 16 to40. It applies to grade and level rebar. It has reasonable structure, light and flexible, simple operation, high production efficiency. It is widely used in steel bar end processing of taper thread joints in concrete works .It adapts to a variety of complex construction site environment. The main performance parameters: Processing of bar diameter range: 16mm 40mm Processing thread length: less than or equal to 90mm Processing steel length: greater than or equal to 300mm Power: 380v 50hz Main motor power: 4kw Reduction ratio reducer: 1:35 Rolling head speed: 41r/min Overall dimensions: 1000 480 1000 (mm) Total weight: 510kg
PARAMETER: 1. Range of application: Ï?16-Ï?40 2. Threading speed: 32r/min 3. Back off speed: 64r/min 4. Pitch size: 4 sizes 5. Electric motor power: 2.4 KW /3 6. Rolling (cut) head moving distance: 150mm 7. Out dimension: 1325*570*1070mm Principle:
Specifications: Steel bar connection 1.Material:carbon steel 2.Easy operation 3.Saving time& rebar material 4.No.45 steel Specifications Steel bar connection 1.Material:carbon steel 2.Easy operation 3.Saving time& rebar material 4.No.45 steel Spec.: 1. Sleeve material: #45 high quality carbon steel 2. Diameter :14~40mm (enough quantity in stock) 3. Carbon sleeve thread pitch:1.75/2.5/3/4 4. Sleeve standard thread angel: 60/75 5. Steel bar sleeve is used to connect two pieces of rebar together. 6. Passed the tensile strength test, the tensile strength is 594mpa, test report canbe supplied as well. 7. The steel bar connecting sleeve has passed iso9001 international quality system, so quality can be guaranteed with no doubt. 8. Types: standard type / left-handed and right-hand type/ reducing type sleeve. 9. We are well-known enterprise in bar connecting field in china. 10.Different spec.Is available as per your requirements, free sample can be supplied for your reference.
Commodity: Remelted aluminum ingot (A7) Specification: AI>99.7%, AI 99.7% min, FE 0.17% max, SI 0.10 max Quantity: 5000 MT minimum order. Inspection: CCIC/SGS at loading port to be borne by the seller, CIQ at loading port, to be borne by the seller Origin: Africa Incoterms 2010: CIF Delivery shall be performed by the seller to any port within 30 days after SPA signed.
Hebei Yida BTS-3 Rebar Parallel Thread Cutting Machine is used for thread cutting on the end of rebar after cold forging. Processing different diameter rebar, only chaser need to be changed, so it's very easy and simple for working man.
China iron rebar stirrup bending machine manufacturer China zhihaomachinery is a leading China iron Rebar Stirrup Bender manufacturer, reliable supplier and exporter. Adhering to the pursuit of perfect quality of products, so that our iron Rebar Stirrup Bender have been satisfied by many customers. Extreme design, quality raw materials, high performance and competitive price are what every customer wants, and that's also what we can offer you. Of course, also essential is our perfect after-sales service. If you are interested in our iron Rebar Stirrup Bender services, you can consult us now, we will reply to you in time!
construction automatic rebar bending machine Technical parameter: Model KT6 double bending way Single wire 5-16mm Double wire 5-12mm Max bending angle ±180 Max traction speed 75m/min Max bending speed 800 /sec Dimension 4000*2000*2200mm Machine color Yellow (customized) Total power 52.5kw(include air compressor) Work temperature -5 --40 Length accuracy ±1mm Angle accuracy ±1 Average power 12kw/h Weight 3000kg Optional with long platform
RC-20 Portable Rebar Cutting Machine is of light weight, small size, easy to carry, easy to operate, cutting process does not produce sparks, dust, no odor. Mainly used to cut steel bars used in construction, such as rebar. Round. Steel bars. Screws, etc. Voltage 220V/110V Wattage 830W/900W Gross weight 17.5kg Machine weight 13kg Cutting speed 3.0-3.5 s Max rebar 20MM Min rebar 4MM Package One Pc /Metal Box/Cardboard Ctn Carton Size 460*160*270mm Machine Size 410*115*220mm Certificate CE ROHS
