Rodent Repellent Pouches Twobrosrepellent best rodent repellent for attic pouches - your ultimate solution to keep mice and rats at bay. Our premium formula combines ultra-powerful and sustainable essential oils to emit a strong, clean, minty aroma that causes strong irritation to the pest brain and olfactory nervous system. Safe and friendly for children and pets, our all-natural ingredients repel rodents without harming them. Effective for up to 60 days, the pouches are easy to place and work for both indoor and outdoor rodent prevention. With Twobrosrepellent Rodent Repellent Pouches, say goodbye to rodents and hello to a pest-free environment. Features of Rodent Repellent Pouches Twobrosrepellent rodent repellent pouches - the ultimate solution to your pest control problems. Our pouches are made of an exclusive formula combining ultra-powerful and sustainable essential oils that emit a strong, clean, minty aroma, causing strong irritation to pest brain and olfactory nervous system. Say goodbye to rodents like mice and rats, who will be forced to leave your property immediately. Features of Rodent Repellent Pouches Our rodent repellent pouches are long-lasting and effective, providing up to 2 months of protection against all types of rodents, both indoors and outdoors. Independently tested, our premium formula is scientifically proven to work. Plus, it's all-natural and humane, made from essential oils that are safe and friendly for children and pets when used as directed. Features of Rodent Repellent Pouches Using our rodent repellent pouches not only keeps mice out, but it also prevents them from chewing on wires and nesting in your house and vehicle. The pouches are also easy to apply and double as an air freshener, leaving your vehicles, closets, and cabinets smelling minty fresh. With an effective area of up to 120 square feet, the pouches can be used in garages, gardens, pantries, basements, sinks, closets, kitchens, storage units, attics, sheds, cars, RVs, and trash cans.
Why choose us? We can not only sell containers, but also provide shipping container services. 1) Door to port, door to door, no problems for us, and we try our best door to your heart. 2)We are logistic babysitters of your cargoes!!! offer at least 3 logistics solutions, save cost at least 5% for you. 3)Proficient in customs clearance in the United States, Europe, Australia, etc., customs clearance 1-2 days earlier. 1)Nearly 20 industry giants, including Huawei, Costco, and SF Express, and over 100 enterprises have been consistently served by Shenzhen Sunny Worldwide Logistics. 2)Shenzhen Sunny Worldwide Logistics has its own logistics fleet and is one of the few in the industry, not just a small freight forwarder in urban villages. 3)Shenzhen Sunny Worldwide Logistics does not rent office space, but owns 1,800-square-meter Grade A office space in Shenzhen's commercial district. 4)Owning a licensed and standardized warehouse at the shipping terminal fully demonstrates our position in international logistics industry. 5)Having signed contracts with three major international shipping companies perfectly reflects our creditworthiness, service capabilities, and business capabilities. 6)Within its responsibilities, Shenzhen Sunny Worldwide Logistics provides full compensation for any delays or damages. With such strength, what do you have to worry about? 7)Who in the logistics industry provides both order follow-up and logistics services for major customers, directly communicating with overseas end customers? 8)Once we have cooperated together, you'll experience our "more shipper-oriented than shippers" values and are unlikely to look for another company. 9)There are no additional fees once signed. we never resorts to underhanded tactics and does not engage in industry chaos. 10) Customized combined logistics services, including rail, sea, and air transport, reduce your freight costs or time. It is difficult to find such services. 11)Your are promptly informed by us of changes in tax exemption and refund policies in many countries, reducing hidden costs that others may not consider.
Use Merrell microfiber wall tiles cleaning mop to remove dust from the wall, use a microfiber pad to absorb dust, clean the walls, and then wet and wipe the mop. You can also use a brush to easily remove the dust on the reusable microfiber mop. And then dry the walls, and gently wipe the surface with a clean, dry cloth. You can also keep the windows open to dry the walls when you go out. Clean Walls with Mop 129cm Long Handle Design Microfiber mop for walls and ceilings can help you clean close to the ceiling or even the ceiling. Square Mop Pad Cleaning walls with mop can help you in the cleaning process without leaving any dead corners. To Your Own Needs You can also wet or dry the mop pad to clean the wall according to your own needs. Advantage of Cleaning Mop for Walls 1. Tubes of various materials are optional. 2. 129cm long handle design. 3. 360-degree flexible rotary mop head, which means no dead corner cleaning. 4. Microfiber wall mop heads with strong dust adsorption. 5. 4 sections detachable for easy storage. 6. Magic tape base plate and mop pad can be reused, save money. 7. Lightweight to avoid the risk of arm injury during cleaning. Now the price of household cleaning products bulk is reasonable, if you have needs to buy cleaning tools equipment, please contact us.
Size:600*600mm Resflor Introduction of Products     Calcium sulphate raised floor panel make the environment friendly plant's fibre as the reinforcement material, and then solidify the calcium sulphate crystals, and after the pulse pressing process done. It's wildly used in the raw material of the raised flooring,because the good furthers in environment friendly, fireproof, high loading capacity and flatness and so on. Characteristics     1.Strong wearability, nIntroduction of Products     Prefer aluminum as base material. Die casting by large oil press,imported strong glue paste HPL or PVC, pedestal/stringer are pressured forming with steel, lead screw could adjust height, Characteristics. Characteristics     1.This is best base material/optimal conductor in antistatic floor, can give off the static into ground by earthling system in a very short time.     2.Fireproof, soundproof, dustproof, antisoil, resistance to chemical attack, electromagnetic shielding.     3.Pressurization, super strength loading,1.5T for each square.     4.High grade and environmental protection, recycled, no devaluate Range of application; bank and high grade office, clean room and other occasions which require higher loading and material.on-bubble, no degumming     2.Strong design ability, pressurization, good loading capacity;     3.Appearance is beautiful;     4.Easy to fix, convenient for wires.
Gypsum Board Manufacturing Plant Wuxing Providing turnkey gypsum board solutions from plant design to completion. With talented engineers and state-of-the-art equipment, we can help you build your Annual Output 20million (12.5mm) Square Meters gypsum board manufacturing plant. As a professional building materials equipment manufacturer, Wuxing is committed to providing customers with high-quality, economical, energy-saving and environmentally friendly equipment systems and plant construction solutions. At present, we have successfully helped customers in many countries to build several gypsum board production lines, and our products and services have been widely praised by customers. Translated with DeepL.com (free version) Main technical indicators:( based on the board of thickness 12.5mm) 1. Processing speed:40M/min 2. Annual working days 300, 24 hours continue producing 3. Product specification: Length 2000-3000MM Width 1200-1220MM Thickness 7-15MM 4. Power requirement: Three phrase AC420V, 50Hz One phrase AC220V,50Hz This production line is a fully mechanized production line with a total installed capacity of about 1500 KW. 5. Fuel requirement: natural gas, diesel, coal 6. Workshop requirements: 340M length * 50M,had better more than that. 7. Automation degree: operation system adopts PLC program control,fully automated production process, forming - sealing head and stack.
Professional Tube Metal Fiber Laser Cutting Machine Fiber laser cutting machine is one metal laser cutting machine. It can help us cut many different metals, such as stainless steel, carbon steel, copper, aluminum,brass, gold, silver, iron, titanium, alloys, etc. Tube laser cutting machine adopts with FSCUT3000S system, which is designed for tube cutting control, support standard tube(rectangle, circle, oval, ellipse and obround etc.) , free form , and steel channels(T/U/H/L shape) production of high precision and efficiency. Product configuration: 1. It can process square pipe, round pipe, rectangular pipe, oval pipe, channel steel, I-shaped steel, hexagon steel, etc. 2. Servo support design, more stable cutting. 3. One-key self-centering, fast clamping, rapid cutting. 4. The clamping force of the chuck can be adjusted according to the wall thickness of the pipe, which is convenient and efficient. 5. The rear chuck brakes quickly to ensure pipe cutting accuracy. Our advantage of fiber laser cutting machine: -- High precision, fast speed, smooth cutting edge, no burrs. --The laser head will not touch the surface of the material and will not scratch the workpiece. --It has the narrowest cutting seam, the smallest heat affected zone, the least local deformation of the workpiece, no mechanical deformation. --Good processing flexibility, it can cut any graphics, such as pipes and other special-shaped materials. Different cutting thickness requires different laser power, please tell us your material, size and thickness, therefore we can recommend you the suitable laser cutting machine.
Digital Rail Offset Ruler This digital railway offset ruler is special equipment which is used for railway turnout offset distance and frame size Measuring the distance between the working edge of straight stock rail and the closure rail working edge BENEFITS 1 Durable Adopt the high strength material not easy to wear out 2 High Accuracy Reach 005mm 3 Stable insulation performance The ruler body is equipped with insulating board which is made of epoxy glass fiber board FR4 It has high mechanical strength performance under the temperature of 40 120 The size of the mechanical ruler is stable and never degenerates and the electrical insulation performance is stable in high humidity environment 4 Accept customized 5 Digital displayeasy to read 6 Multifunctions with wide usagecould be used for measuring two kinds projectssuitable for different demands 1Measure the offset distance for the standard track gauge turnout 2Could be used as track square ruler for measuring the right alignment of rail tracks 7 High hardness Measure Heads Made of Rockwell 52 steel high hardness and not easy to rust Specification Model LJSZJCI Type Digital Rail Offset Scale Ruler Material Aluminum alloy Dimensions L x W x H 17103540cm Type Digital Measuring Rang 1001400mm or Customization Indication Error 04mm Accuracy 005mm Insulation Resistance 1M
Plasma cutting machines are used for iron/steel plate cutting, if you have big size metal to cut, the portable and table type are all not suitable. You need choose gantry type plasma cutting machines, but it price is very high. So we design this kind plasma cutting machines that can cut big size iron/steel plate with good price. Features of plasma cutting machines: 1 .The machine is all welded as seamless steel structure. Steady structure and long life time 2. High configuration, high cutting speed and precision. 3., Auto ARC starting. Steady performance. 4, Control system: STARFIRE control, with USB interface 5. Cutting material: steel, copper, iron, aluminum, galvanized sheet, titanium plates, and so on. 6. File format: G-code 7, Suitable Software: CAD, ART CUT, Type, Art CAM etc Parameters of plasma cutting machines Working Voltage 3-Phase 380V/2-phrase 220V Working Area(X*Y) 2000*3000mm, 2000*4000mm, 2000*5000mm, 2000*6000mm Machine Structure Welded X Y Guide Rail Taiwan HIWIN Square Rail X Y Transmission Imported Rack gears Drive Mode Stepper Motor (Optional Servo ) Control System STARFIRE Max thickness 30mm Plasma Generator 63A/100A /120A/160A/200A Cutting Speed 0-10000mm/min G.W. 1500KGS
Parameter: Maximum swing diameter over bed: 800 mm; Maximum turning length: 3000 mm; Maximum length of two centers: 3000 mm; Spindle bore diameter: 104 mm; Spindle nose type D11 type; Spindle nose taper: 120(1:20) mm; Spindle speed range(clockwise): 5.4-720(18 steps) rpm; Spindle motor power: 11 kw; Rapid motor power: 1.1 kw; Saddle feed speed: 4000 mm/min; Spindle longitudinal feed per revolution: 0.06-24.3/64 kinds mm/r; Spindle transverse l feed per revolution: 0.03-12.1/64 kinds mm/r; Lead screw pitch: 12 Metric ; Metric threads range(number): 1-240(50 kinds) mm; Inch threads range(number): 1-14(26kinds) t.p.i; Modular threads range(number): 0.5-120(53 kinds) mm; Diametral pitch threads range(number): 1-28(24 kinds) Dp; Tailstock sleeve diameter: 100 mm; Tailstock sleeve traverse: 250 mm; Tailstock center taper hole: MT5 ; Positions of tool rest: 4 positions vertical type pcs; Maximum swing diameter over tool rest: 480 mm; Transverse travel of lower tool rest: 500 mm; Transverse travel of upper tool rest: 200 mm; Section size of tool shank: 25*25 square mm; Machine weight: 5900 kg; Machine overall size: 5160x1450x1630 mm;
Parameter: Unit Maximum swing diameter over bed: 800 mm; Maximum turning length: 1500 mm; Maximum length of two centers: 1500 mm; Spindle bore diameter: 104 mm; Spindle nose type D11 type; Spindle nose taper: 120(1:20) mm; Spindle speed range(clockwise): 5.4-720(18 steps) rpm; Spindle motor power: 11 kw; Rapid motor power: 1.1 kw; Saddle feed speed: 4000 mm/min; Spindle longitudinal feed per revolution: 0.06-24.3/64 kinds mm/r; Spindle transverse l feed per revolution: 0.03-12.1/64 kinds mm/r; Lead screw pitch: 12 Metric ; Metric threads range(number): 1-240(50 kinds) mm; Inch threads range(number): 1-14(26kinds) t.p.i; Modular threads range(number): 0.5-120(53 kinds) mm; Diametral pitch threads range(number): 1-28(24 kinds) Dp; Tailstock sleeve diameter: 100 mm; Tailstock sleeve traverse: 250 mm; Tailstock center taper hole: MT5 ; Positions of tool rest: 4 positions vertical type pcs; Maximum swing diameter over tool rest: 480 mm; Transverse travel of lower tool rest: 500 mm; Transverse travel of upper tool rest: 200 mm; Section size of tool shank: 25*25 square mm; Machine weight: 4900 kg; Machine overall size: 3660x1450x1630 mm;
Parameter: Unit Maximum swing diameter over bed: 400 mm; Maximum turning length: 1000 mm; Maximum length of two centers: 1000 mm; Spindle bore diameter: 104 mm; Spindle nose type D11 type; Spindle nose taper: 120(1:20) mm; Spindle speed range(clockwise): 5.4-720(18 steps) rpm; Spindle motor power: 11 kw; Rapid motor power: 1.1 kw; Saddle feed speed: 4000 mm/min; Spindle longitudinal feed per revolution: 0.06-24.3/64 kinds mm/r; Spindle transverse l feed per revolution: 0.03-12.1/64 kinds mm/r; Lead screw pitch: 12 Metric ; Metric threads range(number): 1-240(50 kinds) mm; Inch threads range(number): 1-14(26kinds) t.p.i; Modular threads range(number): 0.5-120(53 kinds) mm; Diametral pitch threads range(number): 1-28(24 kinds) Dp; Tailstock sleeve diameter: 100 mm; Tailstock sleeve traverse: 250 mm; Tailstock center taper hole: MT5 ; Positions of tool rest: 4 positions vertical type pcs; Maximum swing diameter over tool rest: 480 mm; Transverse travel of lower tool rest: 500 mm; Transverse travel of upper tool rest: 200 mm; Section size of tool shank: 25*25 square mm; Machine weight: 4200 kg; Machine overall size: 3160x1450x1630 mm;
Parameter: Unit Maximum swing diameter over bed: 400 mm; Maximum turning length: 3000 mm; Maximum length of two centers: 3000 mm; Spindle bore diameter: 104 mm; Spindle nose type A11 type; Spindle nose taper: 120(1:20) mm; Spindle speed range(clockwise): 7.5-1000(18 steps) rpm; Spindle motor power: 11 kw; Rapid motor power: 1.1 kw; Saddle feed speed: 4000 mm/min; Spindle longitudinal feed per revolution: 0.05-24.3/64 kinds mm/r; Spindle transverse l feed per revolution: 0.03-12.1/64 kinds mm/r; Lead screw pitch: 12 Metric ; Metric threads range(number): 1-240(50 kinds) mm; Inch threads range(number): 1-14(26kinds) t.p.i; Modular threads range(number): 0.5-120(53 kinds) mm; Diametral pitch threads range(number): 1-28(24 kinds) Dp; Tailstock sleeve diameter: 100 mm; Tailstock sleeve traverse: 250 mm; Tailstock center taper hole: MT5 ; Positions of tool rest: 4 positions vertical type pcs; Maximum swing diameter over tool rest: 350 mm; Transverse travel of lower tool rest: 400 mm; Transverse travel of upper tool rest: 200 mm; Section size of tool shank: 25*25 square mm; Machine weight: 5700 kg; Machine overall size: 5160x1380x1450 mm;
Parameter: Unit Maximum swing diameter over bed: 400 mm; Maximum turning length: 1500 mm; Maximum length of two centers: 1500 mm; Spindle bore diameter: 104 mm; Spindle nose type A11 type; Spindle nose taper: 120(1:20) mm; Spindle speed range(clockwise): 7.5-1000(18 steps) rpm; Spindle motor power: 11 kw; Rapid motor power: 1.1 kw; Saddle feed speed: 4000 mm/min; Spindle longitudinal feed per revolution: 0.05-24.3/64 kinds mm/r; Spindle transverse l feed per revolution: 0.03-12.1/64 kinds mm/r; Lead screw pitch: 12 Metric ; Metric threads range(number): 1-240(50 kinds) mm; Inch threads range(number): 1-14(26kinds) t.p.i; Modular threads range(number): 0.5-120(53 kinds) mm; Diametral pitch threads range(number): 1-28(24 kinds) Dp; Tailstock sleeve diameter: 100 mm; Tailstock sleeve traverse: 250 mm; Tailstock center taper hole: MT5 ; Positions of tool rest: 4 positions vertical type pcs; Maximum swing diameter over tool rest: 350 mm; Transverse travel of lower tool rest: 400 mm; Transverse travel of upper tool rest: 200 mm; Section size of tool shank: 25*25 square mm; Machine weight: 4700 kg; Machine overall size: 3660x1380x1450 mm;
Parameter: Unit Maximum swing diameter over bed: 400 mm; Maximum turning length: 1000 mm; Maximum length of two centers: 1000 mm; Spindle bore diameter: 104 mm; Spindle nose type A11 type; Spindle nose taper: 120(1:20) mm; Spindle speed range(clockwise): 7.5-1000(18 steps) rpm; Spindle motor power: 11 kw; Rapid motor power: 1.1 kw; Saddle feed speed: 4000 mm/min; Spindle longitudinal feed per revolution: 0.05-24.3/64 kinds mm/r; Spindle transverse l feed per revolution: 0.03-12.1/64 kinds mm/r; Lead screw pitch: 12 Metric ; Metric threads range(number): 1-240(50 kinds) mm; Inch threads range(number): 1-14(26kinds) t.p.i; Modular threads range(number): 0.5-120(53 kinds) mm; Diametral pitch threads range(number): 1-28(24 kinds) Dp; Tailstock sleeve diameter: 100 mm; Tailstock sleeve traverse: 250 mm; Tailstock center taper hole: MT5 ; Positions of tool rest: 4 positions vertical type pcs; Maximum swing diameter over tool rest: 350 mm; Transverse travel of lower tool rest: 400 mm; Transverse travel of upper tool rest: 200 mm; Section size of tool shank: 25*25 square mm; Machine weight: 4000 kg; Machine overall size: 3160x1380x1450 mm;
Parameter: Maximum swing diameter over bed: 400 mm; Maximum swing diameter over carriage: 210 mm; Maximum turning length: 2000 mm; Maximum length of two centers: 2000 mm; Spindle bore diameter: 52 mm; Spindle nose type: ISO-C6 (C8) type; Spindle inner hole taper: MT6 ; Spindle speed range(clockwise): 10-1400(24 steps) rpm; Spindle speed range(anti-clockwise) 12.5-1400(12 steps) rpm; Spindle longitudinal feed per revolution: 0.08-1.59 mm/r; Spindle transverse l feed per revolution: 0.04-0.79 mm/r; Spindle motor power: 11 kw; Metric threads range(number): 1-192(44 kinds) pcs; Inch threads range(number): 2-24(24 kinds) pcs; Modular threads range(number): 0.25-48(39 kinds) pcs; Diametral pitch threads range(number): 1-96(37 kinds) Dp; Transverse travel of the tool rest: 320 mm; Travel of small tool rest: 140 mm; Swing angle of tool rest rotary table : Pos&Neg 90 Deg.; Rapid feed speed (transverse/longitudinal ): 4/2 mm; X-axis travel: 180 mm; Z-axis travel: 320 mm; Section size of tool shank: 25*25 square mm; Tailstock sleeve diameter: 75 mm; Tailstock center taper hole: MT5 ; Tailstock sleeve traverse: 150 mm; Machine weight: 2570 kg; Machine overall size: 3668x1000x1267 mm;
Parameter: Maximum swing diameter over bed: 400 mm; Maximum swing diameter over carriage: 210 mm; Maximum turning length: 1500 mm; Maximum length of two centers: 1500 mm; Spindle bore diameter: 52 mm; Spindle nose type: ISO-C6 (C8) type; Spindle inner hole taper: MT6 ; Spindle speed range(clockwise): 10-1400(24 steps) rpm; Spindle speed range(anti-clockwise) 12.5-1400(12 steps) rpm; Spindle longitudinal feed per revolution: 0.08-1.59 mm/r; Spindle transverse l feed per revolution: 0.04-0.79 mm/r; Spindle motor power: 11 kw; Metric threads range(number): 1-192(44 kinds) pcs; Inch threads range(number): 2-24(24 kinds) pcs; Modular threads range(number): 0.25-48(39 kinds) pcs; Diametral pitch threads range(number): 1-96(37 kinds) Dp; Transverse travel of the tool rest: 320 mm; Travel of small tool rest: 140 mm; Swing angle of tool rest rotary table : Pos&Neg 90 Deg.; Rapid feed speed (transverse/longitudinal ): 4/2 mm; X-axis travel: 180 mm; Z-axis travel: 320 mm; Section size of tool shank: 25*25 square mm; Tailstock sleeve diameter: 75 mm; Tailstock center taper hole: MT5 ; Tailstock sleeve traverse: 150 mm; Machine weight: 2220 kg; Machine overall size: 3168x1000x1267 mm;
Parameter: Maximum swing diameter over bed: 400 mm; Maximum swing diameter over carriage: 210 mm; Maximum turning length: 1000 mm; Maximum length of two centers: 1000 mm; Spindle bore diameter: 52 mm; Spindle nose type: ISO-C6 (C8) type; Spindle inner hole taper: MT6 ; Spindle speed range(clockwise): 10-1400(24 steps) rpm; Spindle speed range(anti-clockwise) 12.5-1400(12 steps) rpm; Spindle longitudinal feed per revolution: 0.08-1.59 mm/r; Spindle transverse l feed per revolution: 0.04-0.79 mm/r; Spindle motor power: 11 kw; Metric threads range(number): 1-192(44 kinds) pcs; Inch threads range(number): 2-24(24 kinds) pcs; Modular threads range(number): 0.25-48(39 kinds) pcs; Diametral pitch threads range(number): 1-96 (37 kinds) Dp; Transverse travel of the tool rest: 320 mm; Travel of small tool rest: 140 mm; Swing angle of tool rest rotary table : Pos&Neg 90 Deg.; Rapid feed speed (transverse/longitudinal ): 4/2 mm; X-axis travel: 180 mm; Z-axis travel: 320 mm; Section size of tool shank: 25*25 square mm; Tailstock sleeve diameter: 75 mm; Tailstock center taper hole: MT5 ; Tailstock sleeve traverse: 150 mm; Machine weight: 2070 kg; Machine overall size: 2668x1000x1267 mm;
Technical Parameters Travel of X and Y Axes: 800x1200 mm; Maximum cutting thickness/ Maximum height of the part: 700 mm; Maximum Work piece weight: 1000 kg; Wire diameter: Standard 0.18 mm mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 985x1580 mm; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " . Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; No. of axes: 4 axes (X,Y,U,V) Maximum cutting speed: 160 square mm/min; Numerical Control System: X8 ; Motor power: 2.5 KW; Maximum processing current: 7 A; Maximum power consumption: less than 1 KVA; Minimum feed increment: 0.001 mm; Adjustable range of pulse width: 15-150 �¼s; Approx. Machine size (LxWxH): 2600x2400x1800 mm; Approx. Machine weight: 4500 kg; Approx. Machine control cabinet size: 670x630x1800 mm; Approx. Machine control cabinet weight: 200 kg; Operating system/CNC system/Software drawing system: X8 system is a total integrated system that includes CNC system, Operating system and Software drawing system. ; Menu language: Chinese and English ; The units of measurement does the system use: Metric ; Data port: USB port, RS 232C port, Ethernet port ; Operating room temperature: Normally is 5-40 , we suggest 10-20 â??. ;
Technical Parameters : Travel of X and Y Axes: 500x630 mm; Maximum cutting thickness/ Maximum height of the part: 600 mm; Maximum Work piece weight: 700 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 600x860x600 mm; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " . Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; No. of axes: 4 axes (X,Y,U,V) Maximum cutting speed: 150 square mm/min; Numerical Control System: X8 ; Motor power: 2.5 KW; Maximum processing current: 7 A; Maximum power consumption: less than 1 KVA; Minimum feed increment: 0.001 mm; Adjustable range of pulse width: 15-150; Approx. Machine size (LxWxH): 2000x1950x1750 mm; Approx. Machine weight: 2540 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg; Operating system/CNC system/Software drawing system: X8 system is a total integrated system that includes CNC system, Operating system and Software drawing system. ; Menu language: Chinese and English ; The units of measurement does the system use: Metric ; Data port: USB port, RS 232C port, Ethernet port ; Operating room temperature: Normally is 5-40 , we suggest 10-20 ;
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 3000 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
