Rubber moulded good.
This is recycled rubber made out of used tyres cleaned free from fibres, steel etc ash content less than 0% can be used for manufacturing all kinds of rubber products Jumbo bags 1mt to 1.5 mts used jumbo bags
Specifications resistvity of surface layer 106-109¬+ Resistvity of botton layer 103-105¬+ Bulk resistvity 105-108¬+ Abrasistivity loss f_0.02g/cm2 Time forf static dissipation
Thickness:2.5mm-6mm Width:1m-1.5m Longth;1m-50m . Packingin plastic film roll and pallet.
The specification:thickness;1mm-25mm width;1m-2m longth;1m-50m . Plastic film roll and the pallet.
The thickness from8mm-20mm, the wide from 1-2m, the longth from 1-50m. Packing in plastic film and the wooden pallets.
The silicone rubber sheet used to industry area.It can be made to the sealing or the o-ring. Packing in plastic film to roll and the pallet.
Sponge rubber strips
Silicon rubber for molding making is primarily intended for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts, crafts industry, a large statue buddha, relievo furniture, furniture decorative materials, statues buddha artifacts copied, building decoration materials, large-scale cerment mold, artificial fossils factory, europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Silicon rubber for molding is white or red flowing liquid with general hardness of 22-50A centi degrees after curing. Molding silicon rubber is a kind of elastic silicon rubber whose features with resistance to deformation,high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation. Silicon rubber for mold making operationsú¦ If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; contrarily, if molds requiring slower drying and demold, less curing agent is needed. 25KG,200KG/DRUM PACKING Delivery Lead Times : within 3 days after payment confirmed in bank.
Silicon rubber for manual mold applicationsú¦ The manual mold silicon rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc. Silicon rubber for manual mold features descriptionú¦ The manual mold silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers. Silicon rubber for manual mold operationsú¦ Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2-3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2-3 hours. (Note: our company does not recommend you to add silicon oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demold.) Frequently asked questions for Silicon rubber for manual mold 25KG,200KG/DRUM PACKING Delivery Lead Time : within 3 days after payment confirmed in bank.
Silicone rubber for pad printing operation instructions: Pad printing silicone rubber is two-component silicone, part A is the liquid silicone rubber, part B is the catalyst. The usual mxing ratio for silicone rubber and catalyst is 100 : 2-3, eg. we take 100grams of liquid silicone rubber, then we add 2-3 grams catalyst, mix then evenly and pour it to your mold. Then after 2-4 hours, you will obtain a printing pad. Frequently asked question of pad printing silicone rubber: The reasons why the silicone pad has a short service life are listed as follows: (1)The problem caused by inappropriate filtration of silicone rubber, and impurities in the packaging process due to the uncleanness of barrels and bags. (2)The short service life of the silicone pad has a close relationship with the adding amount of silicone oil. The more the silicone oil added, the softer the silicone pad will be. The silicone oil will destroy the molecule of the silicone rubber, thereby bringing about the non-durable and easy ageing of the silicone pad. Packing: 25KG,200KG/DRUM PACKING Delivery Lead Times : within 3 days after payment confirmed in bank.
Silicon rubber for manual mold applicationsú¦ The manual mold silicon rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc. Silicon rubber for manual mold features descriptionú¦ The manual mold silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers. Silicon rubber for manual mold operationsú¦ Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2-3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2-3 hours. (Note: our company does not recommend you to add silicon oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demold.) 25KG,200KG/DRUM PACKING Delivery Lead Time : within 3 days after payment confirmed in bank.
Silicon rubber for manual mold applicationsú¦ The manual mold silicon rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc. Silicon rubber for manual mold features descriptionú¦ The manual mold silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers. Silicon rubber for manual mold operationsú¦ Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2-3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2-3 hours. (Note: our company does not recommend you to add silicon oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicon oil can be added to soften the mold for easy demold.) Frequently asked questions for Silicon rubber for manual mold What should we do when the air bubbles appeared in the process of mold making ? To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to deair. If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%-2%. In this way, the pre-crosslinking time of silicon rubber will slow down, so the air in the mold will be eliminated gradually to reduce the air bubbles. 25KG,200KG/DRUM PACKING Delivery Lead Time : within 3 days after payment confirmed in bank
The mat can be applied to the ground pavement in the hotel, gymnasium, meeting room walkway, kitchen, warehouse, toilet, showers, supermarkets; it has the merits of anti-slip, body building and beautiful appearance. Made of Resilient Rubber in a variety of colors that reduces standing worker fatigue, Excellent for drainage, spills pass through the holes eliminating bacteria collection and keeping workers feet dry. Surface texture helps prevent slipping and dirt trapping. Multi-nib bottom adds comfort while enhancing drainage .
This kind of rubber mat is non-slip, non-static and has high flexibility. It is mainly used as floor mat for livestock, like horse, cow, pig, etc. It can reduce feed cost and improve animal comfort, warm and dry. It is a soft, yet durable addition to wood or metal floors can help ease the stress on horses during travel by providing a resilient, comfortable surface on which to stand that provides maximum support and traction for the animals. It also can protect the animals from getting infected by bacteria and getting injured, reduce animal raising cost, increase the production quantity of milk of each cow, etc.
Rubber fine powder Product origin: Crushed tires resulting from the recycling of a mixture of used tires of various categories (pv, cv, gv, hgv, pwv, cev, iv, agrarian, handling, motorbikes, etc). All the technical features of these tires comply with the regulations and standards requirements of france and of the european union. The rubber is made of a mix - in variable proportions - of 2 main types of synthetic rubber and of natural rubber. The 2 types of synthetic rubber are : - the sbr (styrene butadiene rubber) - the nbr (nitrile butadiene rubber) Apparent density: 428 kg/m3 or 0, 428 (adimensional). Industrial process of manufacturing: Exclusively with a mechanical crushing of the tires at ambient temperature. The process used does not require and does not reject any kind of solid, liquid or gas additives.
Specifications: Volatile content:2.0 Organic acid:2.3 Organic soap:0.1 Styrene content:62 Tensil strength(Mpa):8.2 Shore Hardness A:98 ML degree(mooney viscosity):45-60 25KG in composite bag(plastic film+fabrics) lined kraft paper. Stored in clean place, avoid fire, insolation, dust and heat, the max pile is less than 20 bags.
RTV-2 mould making silicon rubber applications RTV-2 mould making silicon rubber is intended for poly resin crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, statuonery gifts crafts industry, a large statue Buddha, relievo furniture, funiture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mould, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. RTV-2 mould making silicon rubber features RTV-2 mould making silicon rubber is flowing liquid with general hardness of 22-50 Aíp after curing. Mould making silicon rubber is a kind elastic silicon rubber mould which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation. Our curing agent is free charged. 25kg/drum, 200kg/drum
High temperature bearing performance, the maximum temperature reaches 200¦c and good oil resisting feature.
1.RTV-2 molding silicone rubber advantage: with good fluidity, fast curing speed, high tearing strength elongation, high tear strength. 2.RTV-2 molding silicone rubber application : RTV-2 molding silicone rubber mainly applicable to make the silicone mould for cultural relic duplication,architectural decoration, resin crafts, lighting ornaments, candles, statues, model design, product exploitation, etc. 3.RTV-2 molding silicone rubber features : RTV-2 molding silicone rubber, silicon rubber are generally named two -component room temperature vulcanization silicone rubber, a kind elastic silicone rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion. 4.RTV-2 silicone rubber instruction: RTV-2 molding silicone rubber are generally named as two-part room temperature sulfurated silicone rubber, which features an exceptional fluidity and good operability. When mixed with 2-3% curing agent, they can still be operated within 30 minutes, but will be formed after 2-3 hours. With resistance to deformation, high temperature, acid and alkali, and expansion, silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts lighting and candle crafts.
