General Information One-Step HAV Rapid Test is immunochromatographic assay for the diagnosic of Hepatitis A and the detection of Antibodies to HAV. Sensitivity : 99.4.0% , Specificity : 99.5% Specimen : Serum, Plasma or Whole Blood Reading Time : 20 min
General Information The CRP Semi-Quantitative Rapid Test utilizes a combination of colloidal gold conjugate and anti-CRP antibodies to selectively detect CRP in human blood. Sensitivity:97% , Specificity:96.9% Specimen : Serum, Plasma or Whole Blood Reading Time : 10 -15min
The Cytomegalovirus Rapid Test is a rapid qualitative lateral flow test designed for the quantitive detection of Cytomegalovirus (CMV) in human serum/plasma samples. Cytomegalovirus is a herpes virus and a leading biological factor causing congenital abnormalities and complications among those who receive massive blood transfusions and immunosuppressive therapy. About half of the number of pregnant women who contract a primary infection, spread the disease to their fetus. When acquired in-utero, the infection may cause mental retardation, blindness, and/or deafness. Serological tests for detecting the presence of antibody to CMV can provide valuable information regarding the history of previous infection, diagnosis or active or recent infection, as well as in screening blood for transfusions in newborns and immuno-compromised recipients. The Cytomegalovirus Rapid Test Device (Serum/Plasma) has been designed to detect CMV through visual interpretation of color development in the internal strip. The membrane was immobilized with antigens of CMV on the test region. During the test, the specimen is allowed to react with colored recombinant mouse anti-human IgM latex conjugates, which were precoated on the sample pad of the test. The mixture then moves on the membrane by a capillary action, and interact with reagents on the membrane. If there were enough CMV antibodies in specimens, a colored band will from at the test region of the membrane. Presence of this colored band indicates a positive result, while its absence indicates a negative result. Appearance of a colored band at the control region serves as a procedural control. This indicates that proper volume of specimen has been added and membrane wicking has occurred.
General Information One-Step Chloramphenicol Rapid Test is a competitive immunoassay for the semi-quantitative detection of the presence of Chloramphenicol residue in milk, Honey,Tissue extract and Aquatic products. Detection limit: Milk 0.3ppb ,Honey 0.3ppb , Tissue extract 0.3ppb , Aquatic products 0.3ppb Specimen: Defatted milk, Honey, Tissue extract, Aquatic products Reading Time : 5-10min
General Information One-Step Streptomycin Rapid Test is a competitive immunoassay for the semi-quantitative detection of the presence of Streptomycin residue in milk,honey and aquatic product . Detection limit:Milk 100ppb , Honey 10ppb , Aquatic product 100ppb Specimen: Defatted Milk, Honey,Aquatic products Reading Time : 5-10 min
General Information One-Step Sulfonamides Rapid Test is a competitive immunoassay for the semi-quantitative detection of the presence of Sulfonamides residue in Milk,Honey,Tissue extract and Aquatic products. Specimen: Milk, Honey, Tissue extract, Aquatic products Reading Time : 5-10 min
INTENDED USE Giardia Ag Feces Rapid Test is a sandwich lateral flow immunochromatographic assay for the qualitative detection of Giardia antigen in feces. Assay Time: 5-10 min Sample: Feces 25PCS/BOX
INTENDED USE THE ONE STEP ANTI-DENGUE (IGM & IGG) TRI-LINE TEST IS A COLLOIDAL GOLD ENHANCED, RAPID IMMUNOCHROMATOGRAPHIC ASSAY FOR THE QUALITATIVE DETECTION OF ANTIBODIES (IGM & IGG) TO DENGUE VIRUS (DV) IN HUMAN WHOLE BLOOD, SERUM OR PLASMA. THIS TEST IS A SCREENING TEST, AND ALL POSITIVES MUST BE CONFIRMED USING AN ALTERNATE TEST SUCH AS WESTERN BLOT. THE TEST IS INTENDED FOR HEALTHCARE PROFESSIONAL USE ONLY. 25PCS/BOX
MOR Test SUMMARY AND EXPLANATION OF THE TEST The MOR Gold Rapid Screen Test Strip is a fast and easy to read membrane chromatographic immunoassay with no need for instrument. The method employs a unique combination of monoclonal and polyclonal antibodies to specifically identify Morphine in urine with a high degree of sensitivity. Morphine, one of opiates�¢?? derivatives, is central nervous system stimulants that produce alertness, wakefulness, increased energy, reduced hunger, and an overall feeling of well-being. Morphine has been the preferred drug for the management of pain in cases of advanced cancer and other severe conditions. Morphine and other Opiates�¢?? metabolites may be detected in urine as a result of heroin morphine, codeine, or poppy seed intake. Administration of large doses of Morphine can cause tolerance and physiological dependence in users, and can lead to substance abuse. D-Morphine is controlled substances. GC/MS or immunoassay method has been developed for the determination of 300ng/ml for Morphine. MOR Test PRINCIPLE During a test labeled antibody-dye conjugate mixes with urine specimen and binds to the free drug if it is presented in the sample, to form an antibody-antigen complex. This complex prevents the formation of pink color bands in the test zone of the dip-stick if drug to be detected in specimen is above the detection levels (300ng/ml for Morphine). In case of absent of drug and its metabolites, unbound dye conjugate will bind to the antigens immobilized in the test zone to form a pink reaction line. To serve as a quality control for the assay, another pink line will always appears in the test zone regardless positive or negative result. Packaging Details: Pouch+Box+Carton packaging (1) With our company's Logo (2) With the natural package (3) With OEM package (4) ODM
Product Name: Coronavirus (COVID-19) Antigen Rapid Test Cassette (Swab), COVID-19 Antigen Test Kit, SARS COV 2 Variant Test Kits Sample type Throat OR nasal swab Detection type Qualitative Method: Colloidal Gold Rapid Test Function: Diagnose Certificate: ISO9001/ ISO13485/CE Format: Strip, Cassette, Midstream Sensitivity: 96.23% Specificity: 99.11% Accuracy: 98.56% Reading time: 15 minutes Packaging Details: Pouch+Box+Carton packaging (1) With our company's Logo (2) With the natural package (3) With OEM package (4) ODM
Product Name: Coronavirus (COVID-19) Antigen Rapid Test Cassette (Swab), COVID-19 Antigen Test Kit, SARS COV 2 Variant Test Kits Sample type Throat OR nasal swab Detection type Qualitative Method: Colloidal Gold Rapid Test Function: Diagnose Certificate: ISO9001/ ISO13485/CE Format: Cassette Sensitivity: 96.23% Specificity: 99.11% Accuracy: 98.56% Reading time: 15 minutes Packaging Details: Pouch+Box+Carton packaging (1) With our company's Logo (2) With the natural package (3) With OEM package (4) ODM
COVID-19 RT-PCR TEST - NO RNA PURIFICATION NEEDED! Results in less than 60 minutes, very easy-to-use. Made in USA, with clinical validations all over the world. FDA-EUA approved and CE cleared.
Product Nature Chemical name:Potassium Amyl Xanthate (PAX) Equivalent to : Z-6, AERO 350 xanthate Molecular Formula: C5H11OCSSK Physical characteristics: Slight yellow or grey yellow free flowing Powder or pellet and soluble in water. It is a xanthate based on the C5 alkyl isoamyl alcohol in the potassium salt form Testing method: Lead acetate titration CAS Number: 2720-73-2 EINECS No.: 213-180-2 Use A Collector With High Collection And Normal Selectivity,widely Use In Floatation Of Cu/pb/ne And Pyrite,especially For The Floatation Of The Gold In Gold And Copper Mine.It Could Make Good Result In Copper And Lead Oxidized Ore.Ofeen Used In Rough Selecting And Scavenging. Specifications Chemical components Specification 1 Specification 2 Purity 85% Min 90% Min Moisture & volatiles 10% Max 4% Max Free alkali 0.5% Max 0.2% Max Packing and Storage 120kg Iron Drum,134 Drums Per 20'fcl,16.08mt; (or 110-180kg Iron Drum) 850kg Wooden Box,20 Box Per 20'fcl,17mt; (or 500kg,800kg,850kg Wooden Box With Inner Bag) 25-50kg Woven Bag
We have been in this line for many years, our products is very competitive and resonable . Wooden cases, 100kg, 620x460x1530
We are offering eut monitoring system that includes eut monitoring, analysis and data recording. These eut monitoring systems analyzes data during the test for interference or failure conditions, and records test data for retrieval after the test is complete. It is designed as a stand-alone system to communicate with the main test system using our eut monitoring and test software. The eut (equipment under test) monitoring system combines the following: Monitoring instrumentation Video and audio equipment Software to provide eut signal monitoring (analog and digital) Eut stimulation Monitoring for visual or audio interference during testing The monitoring is enabled only after the test level is established with the main test system, since the EUT Monitoring System is fully synchronized with test system. These are appreciated because all parameters captured by the EUT Monitoring System during testing ensures to accurately recreate interference or failure points to resolve compatibility issues monitored. These systems are configured specifically to cater the test needs and can be configured for specialized requirements such as audio breakthrough required by mobile radio standards and ABS/TCS testing needed in automotive test standards. Our entire range of standard as well as customized seamless interface with main test system completes the control of the EUT Monitoring System from the control room console. System Components: EUT stimulation and monitoring instruments selected to cover applicable specifications and meet your price/performance requirements Video monitoring system using shielded color cameras to visually monitor equipment under test An audio monitoring system can supply as a stand-alone solution or built into the video camera system A system controller with application software that offers power to control monitoring equipment These are used to process and store data, graphics, and results of series measurements System cabling and switching to connect the control room with the chamber Shielded room allow test engineers complete control of the EUT monitoring system from the desktop Fiber optic links for analog and digital signal monitoring. We are offering Radiated Conducted EMS that is used for EMS Testing Many electronic products. The subassemblies must meet immunity testing requirements depending on the product's target marketplace. These are designed specifically to meet the requirements of specific environmental use and internal manufacturer's requirements. It also needs an engineer to control instrumentation from a variety of vendors and perform detailed test procedures for numerous specifications. These are known for integrating test instrumentation, system controls, positioning devices, and software to perform automated, semi-automated, and manual immunity measurements in an anechoic chamber, shielded room, or test cell. The range of test specifications is carefully evaluated to develop an integrated test environment covering the basic, generic, product family and product specific standards. The entire recommendation is based on proven system installations, in-house research and development, and extensive experience with dozens of test instrument suppliers. It result in a seamless interface the test system and the test environment. We are offering a range of Radiated Conducted EMI that is designed and manufactured to use in an anechoic chamber, shielded room, OATS, or test cell to perform automated, semi-automated, and manual emissions measurements. These systems are integrated with test instrumentation, system controls, positioning devices and software. This helps to test specific products or subsystems for electromagnetic emissions according to international, R&D and manufacturer-specific standards. Designed especially to meet customerÆs requirements, these receive the exact system solution. This is offered without unnecessary components and costs associated with off-the-shelf, "one size fits all" test systems. Further, we also offer turnkey solution for our Radiated Conducted EMI, which includes system designing and installation with dozens of test instrument supplies. The turnkey EMI Test System designed by us assist to meet product testing requirements. A typical system includes: EMI test instrumentation selected to cover applicable frequencies and meet your price/performance requirements. Antennas/LISNs/Clamps selected to match both test standards and test facility capabilities. Measurement Accessories such as switching and positioning devices that simplify control and increase efficiency. An EMI Main Control Console with instruments and system controls strategically placed to provide test engineers easy access to all functions, and a comfortable, ergonomically-correct work environment. A System Controller with Application Software that offers state-of-the-art power to perform emissions tests from pre-scan to final measurements and to control multiple EMI analyzers and receivers. Proven Solutions: Our test system developments are based on the systems in Europe, North America, and Asia. Each new system incorporates the latest technologies instead of an off-the-shelf approach to design and to explicitly cover the standards. It provides accurate, repeatable measurements and minimizes demands on your limited resources. We are offering Observation System that is appreciated by the clients for conforming to various international quality standards. These are known as Specific Absorption Rate Test Systems (SRC), which include SAR Measurements, System Components, Measurement System, Probes & Measurement Accessories and Position Controller & Positioning Robot. The detail description of Specific Absorption Rate Test Systems is as follows: The SAR System: It is used to measure electromagnetic fields and calculated SAR over a customer-specified frequency range. All tests are conducted in a shielded test room. SAR Measurements: SAR testing works with the thermal effects of human exposure to RF electromagnetic fields. It corresponds to the relative amount of RF energy absorbed of a device close to the body. The test is conducted to verify that the RF energy emitted by a device is within permissible limits for public exposure as defined by test standards. The SAR Measurement System is comprised of the following subsystems: Measurement System: It is an easy to use, flexible package optimized for dosimetric evaluation of radio products. The whole package includes Data Acquisition Electronics and system control computer. Probes and Measurement Accessories: Various broadband probes and support accessories are available based on test requirements. It includes probes to measure current distribution on radio products in free space, to measure fields inside fluids simulating body tissue and to test radiated emissions from mobile radio equipment. Position Controller and Positioning Robot: The automated robot positions the probe inside the tissue-simulating liquid over a precisely defined volume. The robot is controlled by a multiprocessor positioning device. Air tieght packing with container, steel packing, wooden packing
COVID-19 Rapid Antigen Self-Test Kit Indiaâ??s first COVID-19 test kit for self-use. Get your test results within 15 min from the comfort of your home & Office. So, there might be a time when you think you have contracted COVID-19 but cannot book a slot for an RT-PCR test. You might be asked to wait a couple of days. In such a circumstance, you can avail of a home/office corona testing� kit� such as Mylab CoviSelf COVID-19 Rapid� Antigen Test for COVID.� It is Indiaâ??s first COVID-19 home test kit to have earned the approval of the ICMR. Anyone above the age of 18 can use it at home. However, adult supervision is suggested if the test kit is used by people below 18. Intelligently Designed Filled with a solution that inactivates the virus and is designed in a manner to control & contain biohazard.
Rapid Tests Kits OTG USA COVID-19 Rapid Urine Antibody Test (World's First and Only) COVID-19 IgG / IgM Rapid Antibody Detection Test COVID-19 Saliva Antigen Rapid POC Test COVID-19 Antigen Rapid POC Test (Nasal Swab Collection)