Non-Sterile Medical Examination Nitrile Gloves Powder free & Latex free 100% Virgin raw materials with FDA certificate & as per ASTM D6319/ CE EN 455 Quality standard: ASTM D6319, with 510K and FDA, CE/EN455, Color: Blue, white Finger Tips: textured Cuff: Beaded Pcs per Box for S/M/L/XL : 100pcs/box Origin: China, Vietnam, Thailand, Malaysia Benefits Protection from unwanted and harmful substances Beaded Cuff ensures easy donning and prevent roll down Superior Strength with better Puncture resistance Finger Tip Textured enhances wet and dry grip Thinner Guage improves tactile senstivity Custom Design enhances comfort and fit Provide an Alternate Solution for individual who are allergic to natural rubber latex Material : Synthetic Nitrile Type : Non-Sterile Powder Free, Amibidextrous, Finger Tip Textured, beaded cuff. Storage: Store in a dry and cool place, the temperature not higher than 38�° C Shelf life: 2 years Physical Properties Tensile Strength: Before Aging 14Mpa min Tensile Strength: After Aging 14Mpa min Elongation at Break (%): Before aging 500% min Elongation at Break (%): After aging 400% min Length: 230 mm in XS, S, M, L, XL Width: 70+/- 10 (XS) Width: 80+/- 10 (S) Width: 95+/- 10 (M) Width: 110+/- 10 (L) Width: 120+/- 10 (XL) Thickness Single wall ( mm): Fingers 0.050mm min Thickness Single wall ( mm): Palm 0.050mm min
Body scrub, conditioner, hair shampoo, massage oil, body lotion, hot oil, bath salt, nail polish remover, cuticle remover, face cream scrub, mud mask, hair gel.
Yellow peas polished 1st grade
Pearl barley (double polished)
Vanish Fabric Stain Remover Product of Reckitt Benckiser Indonesia Available Variant: 1. Vanish Pouch 150 ml (Pink, White) 2. Vanish Bottle 180 ml (Pink) 3. Vanish Bottle 500 ml (Pink, White) 4. Vanish Bottle 1000 ml (Pink) 5. Vanish Pouch 450 ml (Pink, White) 6. Vanish Powder 400 gr (Pink) 7. Vanish Pouch 120 gr (Pink) 8. Vanish Renceng 30 gr (Renceng) 9. Vanish Renceng 60 ml (Pink, White) 10. Vanish Bottle 800 ml (Pink) Shipping from Semarang, Indonesia
Cosmetic Products In Skin Care, Body Care, Hair Care & Color Cosmetics.
Nails
Hex nut, hex bolts, washers, hub bolts, screws, truck tie rod ends, flange nuts, drywall screws, square nuts, concrete nails, nylon fixing anchors, scaffolding products and many other spl items.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Moisture < 7 % Purity > 99.8 % Empty seeds - 0.5 % Broken seeds - 0.2 % MAX Spot seeds - 3 % MAX Onion seeds - 0.02 % MAX Available sizes: 5-8 MM / 7-8 MM / 7-11 MM Cadmium (Cd) < 0.010 mg/kg Acidity < 1,2 mgKOH/g Pieces in 100 g = 500/550 pcs The product do not contain any: Molds, Frozen seeds, Yeast, Stones or foreign bodies, Radioactive elements and live organisms!
Product of Kao Indonesia Biore Facial Foam. Available for Men's Facial Foam, Women's Facial Foam, and Make Up Remover Men's: Double Scrub Facial Foam (Deep Fresh, Cool Oil Clear, White Energy, Anti-Bacterior), Oil Buster Facial Foam (Acne Action, Bright Action) Women's: Mild Smooth, Bright & Oil Clear, Acne Care, Makeup Remover: Soften Up, Cleansing Oil Sheet, Oil Clear.
Features: this long-lasting nail polish protects dehydrated and rough nails with enhanced shine. How to apply: -Apply one coat of base coat over your natural nail. -Ensure that any excess oil is removed from your nails -you can "squeak" your nails using a small amount of nail polish remover. -Wait a few minutes for your base coat to dry before applying two coats of nail polish.
We put forward a high quality of assortment of Nickel which is available in many forms including LME registered and non registered cathodes, cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder, flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods. Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity