Product Introduce About the 360 degree turning transfer trolley, it is powered by battery, which is installed inside of transfer trolley's body. The battery supply power to the DC motor through the electrical control system.We use this principle to operate the 360 degree turning transfer trolley start, stop, go forward and backward, and so on. The wheel of the 360 degree turning transfer trolley uses high strength polyurethane rubber solid tyre or pneumatic tyre. It can get rid of the dependence on the ground track without destroying infrastructure. The 360 degree turning transfer trolley can walk in the ground, turn to at will without being limited by the space and ground, and also can change the direction of walking and route at any time. It's very suitable for field use and the running routes which are not fixed. Advantages and Features 1. The series 360 degree turning transfer trolley does not need to be installed with track. 2. The power supply of 360 degree turning transfer trolley is a battery, which needs to be charged before it provides electricity. 3. The turning mode of this series 360 degree turning transfer trolley is turning while walking. It can make a 360 degree turn on the ground. 4. Low table, smooth running, high security. 5. Simple and convenient operation, one can operate it. 6. The 360 degree turning transfer trolley can be equipped with safety protection, such as stopping when encountering pedestrians or obstacles and radar, and also a sound alarm system. 7. When the ground is slightly uneven, the 360 degree turning transfer trolley can adjust itself, maintain the body balance. 8. The wheel of this series 360 degree turning transfer trolley is solid rubber wheel. 9. Suitable for operating inside and outside of the workshop. It is a common transportation and handling equipment in the factory. 10. The hydraulic lifting device can be installed on the 360 degree turning transfer trolley as per demands.
Product introduction for omni directional electric transporter omni directional electric transporter is powered by battery. It is a new type of electric transporter, which can can be straight or turning freely. It also can designed with hydraulic steering system as demands. Features of omni directional electric transporter 1. With small turning radius, flexible operation, applicable to the narrow working environment. 2.Braking distance is short, high safety, sturdy and durable. 3.It can be 360 ° steering, suitable for a variety of conditions. 4.Adopts DC motor drive, bearing capacity is big. 5.Without install rails, wheels choose rubber or polyurethane material, no harmful for ground. Use notices for omni directional electric transporter 1. Check all parts of the electric transporter are all in good condition; 2. Safety protection device, circuit electronic control switch and all limit switch are all flexible and reliable; 3. Keep the motor equipment clean; 4. The driven mechanism and working environment are clean, no dust and oil; 5. The circuit and control device are clean, flexible and reliable; 6. According to the lubrication requirements of oil; 7. Oil pump, oil cup, Oil mark, oil separator etc keep completely and cleaning, The refueling tools are in good condition; 8. The lubrication system is complete, the oil path is unimpeded, inside and outside are clean, and the oil quantity is sufficient; url:http://www.newld-transfercar.com
1.Brief introductions of BXZ-1 backpack core drilling rig BXZ-1 is a core drilling rig that can drill up to 20 meters. The portable design allows the rig to fit in tighter spaces than traditional larger drill rigs but still has plenty of power to get the job done. This rig is perfect for drilling in remote locations. 2.Applications of BXZ-1 backpack core drilling rig ·mineral prospecting ·geotechnical engineering ·geoscientific research ·tunnel lining ·inflected arch detection ·highway engineering geological exploration ·hydraulic engineering geological exploratory ·oil exploration ·lode prospect 3.Features of BXZ-1 backpack core drilling rig ·portable : a complete set of BXZ-1 can be packed into a backpack that can be carried by one adult ·efficiency and effective: BXZ-1 can work in almost any type of soil conditions ·easy to disassemble ·simple to operate 4.Configuration list of BXZ-1 backpack core drilling rig Item Parameter Unit Quantity Drilling rig 3.2hp/mitsubishi set 1 Drill pipe 33*700mm pc 28 Drill joint 33*100mm pc 28 Core barrel 33*600mm pc 1 Reducing nipple pc 1 Alloy bit 33mm pc 1 Compact bit 33mm pc 1 Diamond bit 33mm pc 1 Manual mud pump set 1 Mud pump ( gasoline engine) high pressure set 1 Maintenance kit set 1 Outlet hose pipe set 1 Inflow water filter pc 1 Inlet hose pipe set 1 Oil & gasoline mixing container pc 1 Safety clamp pc 1 Pipe wrench pc 1 Specialized backpack pc 1 Shandong Master Machinery Group Co.,Ltd. Sales Manager: Kevin Tel:0086-537-2335787 Mob: 0086-18865479503 Wechat:008618865479503 Whatsapp:008618865479503 QQ: 256618593 E-mail:sale03@huaxiamaster.com Website:www.huaxiamaster.com
Product Introduce High duty rail transfer car, it is an electric transfer car running on the rails. Due to its power supply, it get rid of the limitation of cable, and has no strict requirement for the rails. The kinds of high duty rail transfer cars can be operated via remote control, which makes it more convenient and safer. Whatâ??s more, due to this power, it can run without limited distance as long as charged fully! Car Frame Products Details The car frame is two longitudinal beam, several beams with steel panel welded together, which adopts box beam structure according to the crane principle and combined with the design of the cars. Its main feather: large load bearing, little table deformation, long service lifetime. Cast Steel Wheel About the rail wheel, it is single rim of corner case, the material is ZG55, or can be customized as per your demand. It can improve the load capacity and install easily. And the wheel are manufactured and assemblied by ourselves. Battery About the battery, the maintenance free type battery also is chosen to export. This kinds are convenient, and long lifetime, we needn't maintain once a regular time. so in this series rail transfer cars, it is popular among customers. Generally speaking, the charging time is about 8 hours. Intelligent Charger Generally speaking, the intelligent charger is chosen to export, it has high frequency, little interference to the grid, and small volume. The charger can not only realize rapid charging, but also no damage to the battery, and prolong battery lifetime. Applications The high duty rail transfer cars can be used in all kinds of environment with no limited using time. Its application range includes: mould field, car field, steel, iron, heavy industry, light industry, chemical, mine, ship, project, spaceflight, coal, nuclear energy, hydraulic engineering, etc. For material transport: bolier, coil items, transformer, shaft, drum, steel ladle, steel structure, steel pipe, mould, beam, container, heavy equipment, Aluminum product, compressor, polycrystalline silicon, motor, coil, scrap, pallet...
Product Description The transfer cart with coil holder is designed for roll material handling. The transfer cart with coil holder can be powered by battery, low voltage rail, cable drum, towed cable. There are mounted coil holder and roller on the transfer cart to protect the coil from falling down from the transfer cart. The coil holder can be designed according to coil diameter, and roller distance can be adjusted as per coil diameter. The coil holder and roller can be removable from the transfer cart. We can design transfer cart according to the workshop application, material dimension. It can be applied in all kinds of occasion even severe working environment. Advantages Safety and flexibility; High efficiency and stable start; Long lifetime and durable, at least 20 years of lifetime; Simple operation; Using frequency; Environmental protection. Our Company Xinxiang New Leader Machinery Manufacturing Co., Ltd is devoted to manufacture and sell lifting equipment and handling equipment. We can produce 1-500 ton range of various tonnage of KPD rail low voltage series, KPJ cable reel series, KPC safety sliding line series, KPX battery powered series, BWP rubber wheel transfer cart series, KPT towed cable series, KP non-power type seven series which including turning electric flat car, trackless electric flat car, ladle car, ferry electric flat car, hydraulic lifting electric transfer car and so on more than 90 products. Our company located in Yudong Development Zone, and covered an area of 30,000 square meters. Rich design experience engineers and professional manufacturing personnel take you high quality product and service. Our products have been exported to Countries, such as USA, Germany, Netherlands, Thailand, Saudi Arabia, South Africa etc. url:http://www.newld-transfercar.com
Products Description The electric material transfer trailer is mounted on steel rail for shuttling along a fixed path. The capacity load of the electric material transfer trailer can up to 500 tons. The standard electric material transfer trailer is powered by battery. Standard electric material transfer trailer come in lengths of 4, 6 or 8 FT and widths of 4 or 6 FT. The electric material transfer trailers' capacities and sizes are available for specific applications. The electric material transfer trailers can be designed to be semi-manual or fully-automated depending on the requirements of the application. The electric material transfer trailer can also be part of automated crane systems, serving to shuttle goods, material, or product to and from manufacturing processes or storage locations. Working Principle The electric material transfer trailer is battery powered. The battery is installed in the trailer. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the electric material transfer trailer to start, stop, go forward, backward, adjust the speed and so on. Options The hydraulic lifting device can be equipped as per your requirement. As per the transported cargoes, the V frame, U frame, rubber pad, wooden pad, weighing device...can be equipped. As per the working environment, the anti-high temperature, anti-explosion, anti-rust, anti-skid measure can be adopted properly. Warning alarm. Stainless steel decking. Custom paint color. Rail guides. End stops. Each of our design can meet your specific application. Applications Material or stock shuttle Assembly transfer Tank transfer
Products Introduce The steel mill rail flat vehicle is powered by conductor rails. The power supply makes the AC 380v power is transformed into AC 36v three-phase and are respectively connected to the three rails. The steel mill rail flat vehicle's wheels and conducting plate lead the AC 36v electricity to the electrical appliance box which is installed on the steel mill rail flat vehicle, the AC 36v is transformed into DC 380v through the transformer. The controls AC Metallurgy motor through AC control system to make the steel mill rail flat vehicle starting, stopping, going forward, going backward and adjusting the running speed, etc. Advantages The steel mill rail flat vehicle with high level automatation; Excellent gear reducer and motor with high quality, assemblied together perfectly; Safe devices are installed in the steel mill rail flat vehicle; The turning can be realized for this kinds of steel mill rail flat vehicle, as "s", arc-shaped", "curved rail"...; Customization can be supported for the steel mill rail flat vehicle; The steel mill rail flat vehicle with large capacity and high quality; The steel mill rail flat vehicle can be applied in various occasions as high temperature, ponding, dust, scrap iron...; The hydraulic lifting device can be equipped as per customers' demand; The V frame can be installed for rounded material as per your need;
Detailed description This kind of steel coil railway trolley is running on steel tracks or steel squre bars. With different styles and standard capacities up to 500 tons, we have the solution you need and each style can be designed for your specific application. The whole trolley frame adopts crane box girder structure. It has advantages of no easy deformation, large bearing ability. The main parts of steel coil railway trolley includes cable reels, driving system, box girder frame, electric appliance, etc. eatures of steel coil railway trolley Anti-explosion, anti-high temperature Powered by cable With lifting holes, convenient to shipment Stable start, big starting power, long lifetime Simple structure, low cost Running distance is limited Safe and convenient operation High using frequency Unlimited load capacity Can be add hydraulic lifting device Can be add dumping device High efficiency, low energy consumption Applications of steel coil railway trolley Shipyard, steel factory, warehouse to transfer heavy materials. The steel coil railway trolley can applied in the following working station. Carry loads along assembly lines. Transfer material from one work station to the next. Store and transport an entire shift worth of production. They can even be used as a stable yet moveable machine base.
1.The brief introductions of electric pile driver Electric pile driver can generate electricity by its own or external power, which is suitable for building construction foundation , highway foundation reinforcement, high-speed railway power facilities, wind power plant, solar photovoltaic power plant, soft soil treatment, reinforcement and other piling projects. 2. The features of electric pile driver ·Professional design ·Elegant appearance ·Simple operation ·The pile driver can move back and forth, rotate around ·It has the characteristics of fast positioning, quick piling, quick drawing, high efficiency ·Ir can be customized according to the requirements of customers. 3.The technical parameters of electric pile driver Item Unit Parameters Rated power kw 56 Rated speed r/min 2400 Starting voltage v 24 Dimension (long*wide *high) mm 4600*2000*2700 Minimum ground clearance mm 380 Caterpillar width mm 260 Highest standing pipe highest standing pipe 4370 Borehole diameter mm 70-800 Maximum drilling depth mm 3000 Drill pipe rotation speed r/min 71 Main pump model CBG1â??F032/032 Main pump speed l/min 2000-2400 Main pump pressure mpa 20 Main valve flow l/min 100 Hydraulic oil tank volume l 200 Gradient degree 35
1. Melting furnace description Melting furnace : The melting furnace mainly comprises a 12-pulse rectifier transformer, an intermediate frequency power supply, a steel shell furnace body and a PLC auxiliary melting management system. The PLC-assisted smelting management system not only displays the real-time data and information of the power supply operation, but also displays the operating status and information of the entire system, and has automatic oven, cold furnace start, fault diagnosis, fault information display and storage, and operation information display. , system status display and other functions. ZS 11 - 7000 /10-1. 0 * 2 parameters of the rectifier transformer: Electric furnace capacity (t) IF power (KW) Transformer capacity (KVA) Voltage combination Connection group label Impedance voltage (%) Primary side (KV) Secondary side (V) 10T 7000 7000 10 1000 Y/d11 6-8 Main technical parameters of 10T / 7000kw medium frequency coreless induction melting furnace A, comprehensive parameters Serial number project Parameter requirement     1 Melting furnace form Medium frequency melting furnace 2 Melting furnace use Used for melting cast iron , carbon steel, etc. 3 Rated Capacity 10T 4 Maximum capacity 10T +30% 5 Operating temperature 1700 °C 6 Smelting material Cast iron , carbon steel 7 Lower discharge mode Hydraulic : hydraulic control 9 Working noise
Specificationï¼?1/2" ~ 8"(DN15~DN200)ANSI Ratings 150# ~ 600# (PN16~PN100)3 Pieces /2Pieces Body ConstructionRF RTJ BW SW NPT ConnectionsMain Body Material :Â ASTM A105,Website:http://www.cg-valve.com, A182 304, A182 316, A182 304L, A182 316L,A182 F6A,A182,F51,A182 F53,F22 AlloyMain Ball Material:Â ASTM A105, A182 304, A182 316, A182 304L, A182 316L,A182 F6A,A182,F51,A182 F53,F22 AlloyMain Seats Material:Â PTFE/ RTFE(â?¤120â??) , NYLON (â?¤80â??), PEEK/PPL Â (â?¤250â??)Product DetailsForged Floating Ball Valves typical application is for low-medium pressure classes. Substituting it for the smaller size trunnion mounted ball valve can be a cost-saving method.. They are characterized by simple design, easy maintenance, and low cost, with 2-pcs or 3-pcs body design bolted or screwed.together. It can be manual operated (lever or gearbox ), but also equipped with an actuator (electric, pneumatic, hydraulic, etc.).Feature:Design of API 6D and ISO 17292/BS 5351.Full port or reduce portLow Fugitive Emission PackingSide EntryFire-safe Certified API 607Blowout-proof stemAdjustable Stem packing, anti-static deviceISO 5211 Mounting PadLocking Device StandardNACE to MR-01-75
Specificationï¼?1/2" ~ 8"(DN15~DN200)ANSI Ratings 150# ~ 600# (PN16~PN100)3 Pieces /2Pieces Body ConstructionRF RTJ BW SW NPT ConnectionsMain Body Material :Â ASTM A105,Website:http://www.cg-valve.com, A182 304, A182 316, A182 304L, A182 316L,A182 F6A,A182,F51,A182 F53,F22 AlloyMain Ball Material:Â ASTM A105, A182 304, A182 316, A182 304L, A182 316L,A182 F6A,A182,F51,A182 F53,F22 AlloyMain Seats Material:Â PTFE/ RTFE(â?¤120â??) , NYLON (â?¤80â??), PEEK/PPL Â (â?¤250â??)Product DetailsForged Floating Ball Valves typical application is for low-medium pressure classes. Substituting it for the smaller size trunnion mounted ball valve can be a cost-saving method.. They are characterized by simple design, easy maintenance, and low cost, with 2-pcs or 3-pcs body design bolted or screwed.together. It can be manual operated (lever or gearbox ), but also equipped with an actuator (electric, pneumatic, hydraulic, etc.).Feature:Design of API 6D and ISO 17292/BS 5351.Full port or reduce portLow Fugitive Emission PackingSide EntryFire-safe Certified API 607Blowout-proof stemAdjustable Stem packing, anti-static deviceISO 5211 Mounting PadLocking Device StandardNACE to MR-01-75
XGL857 Wheel Loader XGL857 Wheel loader is powerful, high credibility, long using life. The single rocker and long wheel base disign, enlarge the solid implement and frame, ensure stability, enlarge the breakout force and short cycle time. The laoder is of excellent performance and meets the need of loading and unloading heavy materials in mines. Articulated frame, turn redius is small. Pilot system ensures low-effort, nicety and high work efficiency. Quenched interal cutting edge bucket, more strength, better wearing resistance, and long life. Wheel Loader, Single Rocker Wheel Loader, Powerful Wheel Loader Manufacturer High Work Efficiency Wheel Loader, Wearing Resistance Wheel Loader, Engergy Saving Excavator supplier. More information please view here. Rated load 5000kg Operating weight 17300kg Bucket capacity, heaped 3.0m Steering angle 35° Min. turning radius(outside corner of bucket) 7050mm Max. Breakout force 170kN Transmission Planetary power shift Torque converter Dual turbine Time of raise 6.5s Hydraulic cycle time 12s Vehicle speed Forward I: 11.5km/h Forward II: 36km/hReverse : 16km/h Overall Dimensions 7782*2990*3410mm Width over tires 2840mm Wheel Loader, Single Rocker Wheel Loader, Powerful Wheel Loader , High Work Efficiency Wheel Loader, Wearing Resistance Wheel Loader, Engergy Saving Excavator supplier.
Horizontal Detachable Waste Compress Equipment SMALLANDMEDIUMSIZE WASTE TRANSFER STATION SYSTEM WASTE TRANSFER STATION SYSTEM This product is one of our newest generation of self-developed domestic waste disposal equipment. It is composed of the main compress body, the detachable waste container and the transfer tracks. This product is one of our newest generation of self-developed domestic waste disposal equipment. It is composed of the main compress body, the detachable waste container and the transfer tracks. It is ideal for small scale waste collection such as hand collection with cart, tricycle and small dumper. Using horizontal compression technology, the waste volume can be highly reduced. After removing the liquid from the waste, it will be stored in a fully sealed container. This product is extremely approved for its convenience and application diversity. Main features The main body of the compressor is made of highly weather resistant steel plate by soldering. Its well produced for its fine appearance, light weight, h igh endurance and corrosion resistance. The compressor head is double curved with a pleasing waste breaking rate and compression efficiency. Liquid guiding device on the back of the container for liquid discharging. Double guide wheels for the container door to ensure an absolute isolation between compressor and waste container. Twin pumps for the hydraulic system to optimize working efficiency and reduce energy consumption. Multiple security devices s uch as interlock on the control program, indicator lamp�and warning signs. Optional deodorization and dust cleaning system to facilitate equipment cleaning. The main parts of the machine are processed firstly by shot peening, then anticorrosive paint and finally epoxy coat in order to extend service life in corrosive environment.
Introduction of SZ40-16 Backhoe Loader With 0.4m3 Rated Bucket Capacity 1). SZ40-16 Backhoe Loader With 0.4m3 Rated Bucket Capacity has an compact structure and logical layout. 2). Good appearance and design of components embody hommization adequately. 3). The performance has achieved advanced level in China. 4). The imported components is used as the transmission system and the hydraulic system uses domestic famous brand. 5). The panoramic cabin is of broad vision. 6). The driving axle with differential lock and wet disc brake significantly improve the traction and safety performance. 7). The service brake and parking brake adopts maintainable-free. 8). The cover with open-back design improves maintainability. 9). It can be fixed with many accessories according to requirements. Parameter of SZ40-16 Backhoe Loader With 0.4m3 Rated Bucket Capacity Operating weight 6500kg Capacity of bucket 0.4m3 System working pressure 20mpa Engine 4102 Rated power 60kw Rated speed 2200r/min Max. excavating height 6000mm Max. excavating depth 3200mm Max. excavating radius 5550mm Max. excavating Width 720mm Capacity of bucket 0.9m3 Rated load 1600kg Dumping height 2850mm Dumping reach 1000mm Lifting time of movable arm 3.8s Descending time of movable arm 3.4s Dumping time 3s Max. flux 63ml/r Max. Tractive force 30kn Grade ability 35° Ground clearance 220mm Wheel base 2800mm Tread 1550mm Drive type 4WD Tyre 825-16 Size(L*W*H) 7500mm*2100mm*2700mm
Specification Details: 1) 1541 Chemical Component Analysis(%): C: 0.36-0.44; Mn: 1.35-1.65; P: < 0.040; S: < 0.050; 2) Monthly Capacity: 6000 tons. 3) Delivery Condition: BKS condition, Annealed(A), Bright Annealing, Normalized(N), Stress Relief Or Finish Anneal(SR), Quenched and Tempered(Q+T), etc; 4) Surface treatment: ASTM A519-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating,etc; Or Oil-dip paint black with two plastic caps on each end 5) Inspection: Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B) 6) Relevant Test: ASTM A519-Chemical Component Analysis,Mechanical Properties(Ultimate tensile strength,Yield strength,Elongation),Technics Properties(Flattening Test,Flaring Test,Bending Test,Hardness Test,Blow Test,etc), Exterior Size Inspection, Nondestructive electric Test,Hydrostatic Test, magnetic particle testing; 7) Marking: All tubes are eddy current tested and are marked with size, cast number and specification. Or as per customer's requirement; 8) Packing: Hexagonal bundles with several steel strips, Wrapped in waterproof paper, PVC sleeve,and sackcloth with several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires; 9) Packing Type: Round , Square, Rectangle, Hexagon. Streamline, etc; 10) Applications: Automobile and Bearing Industry, Drill or oil industry, Mechanical and Structral Purpose, Hydraulic and Petrochemical Purpose, etc.
LPM Label punching machine with raw waste mouth is suitable for the production of not only all kinds of material labels including paper labels, leather labels, textile labels, and also plastic cards, playing cards, aluminum foil, aluminum plastic, New year card, note book, name card, envelopes of any design of size with an average speed about 900000 pcs per hour. This machine adopts hydraulic pressure system. With a push-cube self-adjusting to every position of the Vâ?� hold where the pack is positioned in order to obtain a homogeneous pressure and distribution of the paper, the working table has a photoelectric cell which gives maximum safety to the operator and allows a quick change of the hollow punch and is adaptable both for low and medium production. The working process is completely stability. The die cutting products surface is smooth, and the size is unified and regular with high precision. Note: the quality of paper products and die are in great relationship. Our companys die is after completion of the process of the six high-quality die, characterized by high accuracy, high hardness, wear-resistant, Durable. MAIN TECHNICAL DATA Model LPM-150 LPM-220 LPM-280 LPM-400 LPM-500 Max cutting size 110*110mm 160*160mm 200*200mm 270*270mm 340*340mm Min cutting size 10*20mm 10*20mm 55*60mm 120*120mm 150*150mm Cutting distance 200mm 200mm 200mm 200mm 200mm Cutting pressure 16KN 30KN 40KN 50KN 50KN Working speed 12000sheets /min 12000sheets /min 12000sheets /min 12000sheets /min 12000sheets /min Power 1.5kw 2.2kw 3kw 4kw 4kw Weight 300kg 360kg 560kg 900kg 1140kg Packing size(mm) 1200*850*1400 1450*850*1500 2300*850*1600 2500*1040*1660 2700*1140*1860
Zhongtuo is a dedicated roll-forming facility equipped with modern machinery to perform the job needed for tomorrow's landscape. Run by a team of highly trained prodution executives, the state-of-the-art facility produces an extensive range of precision-cut steel roof purlin. Fo the steel roof purlin roll forming machine, i will introduce more information to you starting from the drawing profile. Range of products and services 1.Hot dipped galvanized high Tensile Steel C and Z steel roof purlin 2.Section sizes from 80 mm- 300 mm 3.Based metal thickness from 1.5 mm- 3 mm 4.Bridging pieces 5.Design calculation based on BS5950 part 5 and Eurocode Parameters of steel roof purlin roll forming machine Forming steps: 16 rollers Shaft diameter: 90 mm Design type: Middle plate welded Machine frame: 400# H steel welded Roller material: Gcr12 steel Shaft material: 40 CR Working speed: 15 m/min Transport: by chain Power of main machine: 18.5 kw Type of cutting: hydraulic Cutter: Cr12 Working pressure: 20 Mpa Applications of c and z steel roof purlin At zhongtuo, we understand the liberal designs of architects and engineers. Our c and z steel roof purlin are roll-formed and precision-cut for multitude of uses that includes, but is not limited to. 1.Structural supports 2.Single bay buildings 3.Recessed roofs and walls 4.Tower structures 5.End walls 6.Interior supports of multi-bay buildings
Product Introduction Roll to roll film metallizing machine (H serise) converge with the technologies of vacuum, refrigeration, hydraulic, pneumatic, photoelectric and mechanical. It has the features of stable performance, reliable quality and high production efficiency. The major usage for the machine is to metallized an Aluminium coating on the surface of roll films such as PET,CPP,OPP,PVC,PA and PE. The main application of metallized materials are in the fields such as clothing, packaging, security and electronic industry, ect. we would like to take this opportunity to introduce our factory to you,our manufactoty was established in 1993, it is a qualified manufacturer specialized in making Roll to Roll Film Metallizing Machine, vacuum pumps, vacuum equipments and slitting machine in all for more than 20 years of experience. The roll to roll film metallizing machine has been obtained the CE certificate of EU and has been enjoyed the high reputation among all of customers due to the perfect performance.Our machines have been exported to India, Turkey, Bangladhesh, Vietnam, Iran, Russia,North Korea, Turkmenistan and other foreign countries. The local government awarded us the Enterprise of Complying Contracts and Keep Faith for 9 consecutive years. Pls feel free to contact us if you have any other question. Yuedong Vacuum Equipment Manufacture Co., Ltd. of Shantou China Tel: +86-754-88670187/88395012 Email:ydzk@ydzk.com sales@ydzk.com
Application and features : Applies in the workshop production of PE, PP, PVDF elbow, equal tee, four-way such as diameter, extended injection short pipe fittings, production pipe assembly; 45 ° and 60 ° y-shaped tee (Y type tee needs to choose and buy of 45 ° and 60 ° y-shaped three-way welding jig); Integration structure design, different welded pipe need to change the corresponding fixture can; The heating plate temperature control system independently, teflon coating; Electric cutter, safety limit switch, prevent accidental start milling cutter; Low start-up pressure, and high reliability sealing structure; Independent dual channel timer, can record the two periods of heat and cooling, timing alarm over, convenient for the user. Big dial, high-precision shock pressure, more readings clear; The heating plate, cutter adopts tilting, convenient operation; Products comply with 98/37 / EC and 73/23 / EEC standards. Optional components: Short flange welding special fixture. Short pipe welding special fixture 45 °, 60 ° y-shaped three-way welding jig The Main parameters: Model SD-AF315 Pipe sizes (mm) 90,110,125,140,160,180,200,225,250,280,315 Applications 0~90°Elbow, tee, cross, 45° and 60° wyes(optional parts should be used) Heating plate Max. Temp. 270?? Temp. deviation in surface(170~250??) ±7?? Pressure adjustable ranges 0ï½?16MPa Working voltage 380V,50Hz Heating plate power 5KW Hydraulic unit power 1.5 KW Planing tool power 0.75 KW Total power 7.25 KW Weight 760KG(Don`t include optional parts ) Packing Cases 4 Plywood Cases Volume 3.1 CBM