Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 3000 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2200 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1800 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1500 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Multifunction Car Battery Jump Starter for Gasoline/Diesel, Portable Jump Starter, Battery Charger Supplier SHENZHEN TRAMSMART TECHNOLOGY CO., Limited Price $50.00 Availability In Stock Mini Order: 1 Model NO. T240 Dimensions 178X84X45mm Weiht 580g Application Jumpstarting/Charging/Lighting Warranty 12 Months Transport Package Gift Box with Cloth Bag Specification 178x84x45mm/580g Trademark Huayao Origin Guangdong, China(Mainland) HS Code 8507600090 Production Capacity 30000pieces/Month Type: Lithium Battery Certification: CE, RoHS, FCC,MSDS,Un38.3 Capacity: 16800mAh(62wh) Battery: Lithium Polymer Battery Peak Current: 800A Jumpstart for: 8.0L Gasoline & 6.0L Diesel Multifunction Battery Car Jump Starter for gasoline/diesel Specification Name: Portable Jump Starter Input Charging: DC 15V/1A Battery: Li-polymer Battery Output: DC 12-16V/15A MAX USB 5V/3.1A MAX Capacity: 16800mAh (62Wh) EC5 Output: Only for 12V battery system Peak Current: 800A DC Wattage(MAX) 180W MAX Dimensions: 178x84x45mm Charging Time: 6 hours Weight: 580g Bulb Type: Ultra Bright LED light/Strobe/SOS Lifecycle: >500times Working Temperature: -20�ºC-60�ºC Color: Green Black(Customized) Safety Technology: MultiSafety Protection 2.0 Details & Packing List 1.Gift box (240x185x65mm) + color bag (256x193x73mm) 2.Package include: 1�?power adapter 1�?smart clamps 1�?cigarette light adapter 1�?micro USB charging cable 1�?car charger 1�?User Manual Multifunction Car Battery Jump Starter for Gasoline/Diesel How to jump starter your car? 1. Insert the battery clamps into the interface of EC5 dock. 2. Clip the red clamp to the positive electrode and black clamp to the negative electrode of car battery. 3. After connection, the unit will be wake up, and ready information will display on the screen. 4. Start the car in time. Multifunction Car Battery Jump Starter for Gasoline/Diesel Built-in high quality lithium polymer battery MultiSafety Protection 2.0 1.Short circuit protection 4.Charge/Discharge protection 2.Low voltage protection 5.Over-temperatureprotection 3.Reverse polarity protection 6.Charge balance protection Multifunction Car Battery Jump Starter for Gasoline/Diesel FAQ Q1.What is the lifetime of this product? A1.Usually 3-5 years in normal condition. Q2.How to extend the life of this product? A2.It is best to charge it within 3 months and at least once 6 months. Q3.How about the warranty? A3.Normally we offer 12 months warranty, depends on products, some products have 24 months warranty, Contact us for more details.
LED beanie hat - 100% Acrylic Rechargeable LED Beanie: Our rechargeable hat with light provide a standard USB port for battery charging, which means you can charge it in car charger,computer or portable power bank. Just takes about 2-4 hours to fully charge depend on different charging methods, this beanie will always light your way when you need it. Super Bright: With 3 brightness settings, you can adjust the brightness of the hat by pressing according to your own needs. It can last up to 8 hours in the lowest level, 4 hours in medium level and 2 hours in the highest level. Youâ??ll have the perfect amount of light for any task. Keep You Warm: This headlamp beanie is made of soft and elastic acrylic material, comfortable and washable. One size fits all men,women,the simple and stylish design allows everyone to easily match different clothes in the cold winter. Hands Free: No matter what you want to do, this hands free led lighted hat which approves IPX44 water resistant is up for the challenge. Wear it dog walking at night or early morning, running,jogging, camping,fishing, biking, grilling, auto repair, and more. Light your way in dark night and enrich your quality of life. Gifts Idea: Comfortable, super bright, warm, washable, light weight perfect for working out, giftable, our Unisex beanie with light is best present choice for Thanksgiving, Christmas, New Year's Day, Valentines Day, Father Day, birthday and other special occasions. A perfect Gifts for Dad Husband Him Men Women Boyfriend Handyman.
Plasma cutting machines are used for iron/steel plate cutting, if you have big size metal to cut, the portable and table type are all not suitable. You need choose gantry type plasma cutting machines, but it price is very high. So we design this kind plasma cutting machines that can cut big size iron/steel plate with good price. Features of plasma cutting machines: 1 .The machine is all welded as seamless steel structure. Steady structure and long life time 2. High configuration, high cutting speed and precision. 3., Auto ARC starting. Steady performance. 4, Control system: STARFIRE control, with USB interface 5. Cutting material: steel, copper, iron, aluminum, galvanized sheet, titanium plates, and so on. 6. File format: G-code 7, Suitable Software: CAD, ART CUT, Type, Art CAM etc Parameters of plasma cutting machines Working Voltage 3-Phase 380V/2-phrase 220V Working Area(X*Y) 2000*3000mm, 2000*4000mm, 2000*5000mm, 2000*6000mm Machine Structure Welded X Y Guide Rail Taiwan HIWIN Square Rail X Y Transmission Imported Rack gears Drive Mode Stepper Motor (Optional Servo ) Control System STARFIRE Max thickness 30mm Plasma Generator 63A/100A /120A/160A/200A Cutting Speed 0-10000mm/min G.W. 1500KGS
This is a state-of-the-art sewing machine designed to streamline and automate the production of intricate patterns and designs. With its advanced computerized technology, this machine offers precise stitching and high-speed operation, making it an ideal choice for various industries such as apparel, automotive, upholstery, and home textiles. Computerized Operation: The machine is equipped with advanced computerized technology that allows for precise and automated stitching of complex patterns. Users can create and input custom designs through the machine's user-friendly interface, eliminating the need for manual pattern marking and reducing production time. Large Sewing Area: With a spacious sewing area of 300*200mm, this machine offers ample space to sew large-scale patterns and designs. The generous sewing area enables the creation of intricate and detailed designs on a wide range of fabrics and materials. High-Speed Performance: The Automatic Computerized Pattern Sewing Machine is capable of high-speed stitching, significantly increasing productivity and efficiency. The machine's precise motor control and optimized thread tension system ensure consistent stitch quality, even at high sewing speeds. Versatile Stitching Options: This machine offers a wide range of stitching options, including straight stitching, zigzag stitching, decorative stitching, and more. With the ability to customize stitch length, width, and density, users can achieve a variety of design effects and meet diverse application requirements. Model BS-2010 BS-3020 BS-6040 Sewing type SINGLE NEEDLE LOCKSTITCH Max sewing speed 2,800 RPM 2,800 RPM 2,800 RPM Stitching area 200x100 mm 300x200 mm 600x400 mm Cloth feeding device INTERMITTENT FEEDING (DRIVEN BY PULSE MOTOR) Needle gauge 0.05 -12.7mm Can be saved by code 50000 STITCHES/ SEWING PATTERN Highest sewing stitched for each pattern 20000(A PATTERN) Storage SD CARD BUILT-IN MEMORY:2GB, 900 KINDS Clamp drive PNEUMATIC Clamp height Max 35 mm Clamp lowest ONE-PIECE PRESSURE FOOT Pressure foot lift up 22 mm Intermittent pressure foot 0.2-4.5 mm OR 4.5 mm (FACTORY SETTINGS:3 mm) Shuttle (hook) DOUBLE HOOK(STANDARD) Thread wiper device STANDARD EQUIPMENT Trimmer device STANDARD EQUIPMENT Date memory FLASH MEMORY(CAN SAVE WITH SD CARD) 3 INCH DISK 2HD/1.44BM.2DD,USB INTERFACE No. of user programs 50 Loop program number 9 Motor SERVO MOTOR 750W Weight HEAD: 160 kg, OPERATING PANEL: 0.6 kg, CONTROL BOX: 16.2 kg Power SINGLE PHASE 220V 3-PHASE 200V/380V/400V 500VA Air pressure 0.5 Mpa 1.81/min
Multiparameter Patient monitor for critical care domain. 5 parameter/ 7 parameter and 12 parameter Monitor available with touch screen display. ECG respiration SpO2, NIBP and temperature standard Monitoring.
Anesthesia Machine , Anesthesia workstation with two vaporizers and touch screen display. Uses for infant, pediatric and adult application. Both pressure and flow triggers available. medical equipment for critical care segments.
Patient monitor for critical care domain. 5 parameter/ 7 parameter and 12 parameter Monitor available with touch screen display. ECG respiration SpO2, NIBP and temperature standard Monitoring.
Anesthesia Machine , Anesthesia workstation with two vaporizers and touch screen display. uses for infant, pediatric and adult application
Anesthesia Machine , Anesthesia workstation with two vaporizers and touch screen display. uses for infant, pediatric and adult application