Ultra-X RST Pro2 PCI RAM Memory Stress Tester Professional PC Diagnostic R.S.T. 140 Pcs All used in a great condition. Description: RAM Stress Test Professional 2 (RST Pro2) is a memory testing hardware/firmware designed for the rigorous testing needs of memory and system manufacturers, design engineers, and service professionals. RST Pro2 is a Self Booting, Operating System Independent memory diagnostic card for exercising and validating RAM in Pentium through the latest series of Intel Pentium 4/XEON, AMD Athlon XP/MP, and Cyrix/VIA compatible processors. Specifications: Manufacturer: Ultra-X, Inc. Model: R.S.T. Pro2 Memory diagnostic & validation tool With serial port for datalogging Quickly and accurately test and validate memory in desktops, servers, and workstations For use with Intel or AMD x86 compatible 32/64-bit single or multi-core processors For both Base and Extended memory Test up to 64 Gigabytes Uses over 100 test patterns and algorithms Graphic display pinpoints exact location of memory failures Supports the latest SIMM, DIMM, RIMM SRAM, RDRAM (RAMBus), ECC, FB-DIMM, Parity and non-Parity memory technologies Supports DDR-266/333/366/400/466/500, DDR2-533/667/800/1066 Self-Boot technology tests memory without interface of any driver, TSR or operating System limitations
1.GK Combined CH4&CO Alarm Description The GK Combined CH4&CO Alarm is used to test both natural gas and carbon monoxide in home. Its a two in one detector so it shall save more home space with much economic price. 2.GK Combined CH4&CO Alarm Features Available to test both CH4 and CO Best selling model Optional valve and relay output. 3.GK Combined CH4&CO Alarm Application The GK combined alarm is used to test both natural gas and carbon monoxide in home. Itâ??s a two in one detector so it shall save more home space with much economic price. 4.GK Combined CH4&CO Alarm Specifications Measuring gas Natural gas and carbon monoxide Working voltage AC220V±15%/AC110V±15% 50Hz~60Hz DC12V Sensor life >3 years Alarming level CH4: 10%LEL;CO: Follow EN50291 Working Environment Temperature: -10 - 50 Humidity:
Diameter 43mm standard size 1.7mm thickness anodized aluminum alloy tube for Karakuri system. We are the manufacturer of aluminum tubes. Our products are sold directly from factories. With low prices and large shipments, we are the best choice for dealers. 43 series aluminum pipes are typically used in environments with higher requirements for load-bearing capacity. The aluminum tube with a thickness of 1.7mm can provide the user with sufficient bearing capacity. Compared with the traditional lean pipe, the aluminum pipe has less resin coating. Because the supporting connectors are also aluminum materials, it is easy to recycle when doing waste treatment. Moreover, the surface of the aluminum pipe is treated with acid resistant aluminum, and it can be kept beautiful for a long time without maintenance. At the same time, the aluminum tube surface is also coated to reduce oxidation and keep the factory clean. Features 1. WJ-LEANâ??s aluminum tube use international standard size, can be used in any international standard parts. 2. Easy assembly, only needs a screwdriver to complete the assembly. The material is environmentally friendly and recyclable. 3. Aluminum alloy surface is oxidized, the surface is smooth without burrs, and the overall system is beautiful and reasonable after assembly. 4.Product diversification design, DIY customized production, can meet the needs of different enterprises.
Explore precision-engineered Ceramic Rotary Valve from a leading manufacturer. Crafted with ASTM A216 WCB carbon steel, this valve features a robust DN80 (3-inch) design with PN10 and Class 150 LB ratings. The bolted bonnet ensures secure operation, adhering to GB/T 12224 standards, and the RF flanged end provides seamless integration. Upgrade your industrial processes with this high-quality valve solution. Detail Information Ceramic rotary valve, Carbon steel, DN80, PN10, RF. Valve description: Ceramic rotary valve, bolted bonnet, rotary. Design: GB/T 12224. Body: ASTM A216 WCB Nominal size: DN80. Nominal class: PN10. End Connection: RF flange. Face to face: MFGâ??S. Test and inspection:GB/T 9092. Product Range: Body material: Carbon steel. Normal diameter: 2 - 16 Inch (DN50 - DN400). End connection: Flanged. Pressure range: PN10-PN16. Working temperature: -29- +150.
ATLAS-WT3 Freight Elevators ln the elevator car, fixed limit devices are installed on the left and right sides of the floor, and retractable limit devicesare installed near the front door to prevent the car from scratching to the elevator. Features Of ATLAS-WT3 Commercial Freight Elevators Automobile Limiting Device In Car. Landing Floor Call Elevator Device. Specification Of ATLAS-WT3 Freight IFE Elevators NO. Specification ATLAS-WT3 1 Capacity (kg) 2000 2500 3000 2 Speed (m/s) 0.5 1 0.5 1 0.5 1 3 Operation System full collective selection operation 4 Driving System VVVF 5 Door Operator System VVVF 6 Traction Machine Permanent Magnet Synchronous Gearless type 7 Control System CTRL80 8 Car Dimension mm 1800Ã??2300 2000Ã??2500 2300Ã??2500 width*depth 9 Shaft Size mm 3000Ã??2700 3300Ã??2900 3600Ã??2900 W*H As one of escalator and elevator companies, we will do our best to meet all the needs of customers.
Stainless steel water tank SUS316,SUS304 can be choosen depending on the water quality and usage environment ,stainless steel boards are shaped by hydraulic press mold, the standard specification is 1000x1000mm or 1000 x 500mm, they are welded on site by arc-argon welding machine,the welding surface is washed and passivated by acid to ensure the welding parts will not get rusted. Factory use unique stainless steel plate and the high difficulty ramming formation craft to achieve the high strength requirenments with the smallest material consumption. The weight only be third of the ordinaly panel. 1.The raw materaial plate was anlysised by our material anlysier to assure the quality 2.The welding is argon arc weld(TIG) to avoid plate's oxidized 3.After welding the the inner tank ,we will make a full water pressure test to check the welding joint .After welding the jacket ,the full water pressure test be done for jacket too 4.After finishing the surface finish ,our people will make a surface roughness testing to assure the Ra data . 5.After agitator installment ,we will operate it to assure the function is good . 6.The nozzle's position 's confirm also is checked by our quality control people .
NQG5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Specification NQG-5.1 Rail Cutting Machine Material Dimensions (L x W x H) (mm) 800*560*500mm Engine GX270 petrol engine 5.1KW Specification of cutting disc 400*32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticality0. 4mm, flatness0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kg
Product Description NGYM-I Rail Waist Grinding Machine Rail waist grinding machine is suitable for grinding works before railway laying, subway maintenance welding and gluing insulated joints construction. This work is one of the heavy workload jobs in the rail welding operation. In the past, it was mainly carried out by hand-held electric grinder or angle grinder, it has led to high labor intensity, low operation efficiency and slow working speed, poor grinding surface quality, serious environmental pollution etc. The rail waist grinding machine is suitable for 50kg/m-75kg/mrails. Specification Model NGYM-I Material Stainless Steel Dimensions (L x W x H) (mm) 1120*430 *780mm Engine petrol engine Max output power 4.0kw/3600rpm Grinding wheel spindle speed 3600rpm Grinding wheel diameter �¦ 100-230mm Grinding wheel size 2-124*106*34.5/18 G-A20 P 7B-45m/s Machine weight 57kg
API 6A Slab Gate Valve Yulin Machinery This high-performance two-way flat API 6A Slab Gate Valve gate valve is ideal for high pressure critical service applications of 3000 psi to 15000 psi on wellheads, Christmas trees and manifolds. Product Description API 6A Slab Gate Valve have PFFA Series and PFF series. Details as below: PFFA Series Gate valve Full bore design eliminates efficiently pressure drop and vortex, eliminates washing by solids in fluid. Mental-to-mental seal is used between bonnet and body, gate and seat body and seat The surface of gate andseat is weld overlay with hard alloy. which has feature of corrosion resistance and washing resistance. The bonnet and stem designed with back seal, can replace stem sealing under pressure One side of bonnet is designed with sealant injection in order to supply sealant and improve seal and lubrication performance of gate and seat. Can complete with different pneumatic (hydraulic) actuator upon user s requirements Working Pressure: 2000PSI-20000PSI Nominal Bore: 1-13/16-9"(46mm-230mm) Working Medium: oil natural gas mud and gas ,containing hasco Working Temperature:-46C-121'C(Class LU) Material Class: AABBccDDEEFFHH Specification level: PSL1-4 Performance Requirement: PR1-2
Product Description NQG5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Specification Model NQG-5.1 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 800*560*500mm Engine GX270 petrol engine 5.1KW Specification of cutting disc 400*32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticality0. 4mm, flatness0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kg
Product Description NQG5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Specification Model NQG-5.1 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 800*560*500mm Engine GX270 petrol engine 5.1KW Specification of cutting disc �?400*�?32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticality0. 4mm, flatness0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kg
NQGâ??5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Place of Origin Hubei, China Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 800*560*500mm Brand Name Linkage Engine GX270 petrol engine 5.1KW Specification of cutting disc 400*32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticalityâ?¤0. 4mm, flatnessâ?¤0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kg
NQG 5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m 75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc. Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 670*600*510mm Brand Name Linkage Internal combustion engine HONDA GX200 Engine Power 4.8kW Engine Speed 3600r / min Thin grinding wheel (spindle) Spindle speed 3030r / min Specification (linear velocity) 400 * 32 * 4 (â?¥70m /s) Cutting time 60kg / m rail, â?¤120S Number of usage 50kg /m rail, use â?¥ 4 times Number of usage 2 60kg /m rail, use â?¥ 3 times Machine weight 39.5kg
Technical Parameters Travel of X and Y Axes: 1200x1500 mm; Maximum cutting thickness: 1000 mm; Maximum Work piece weight: 3500 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1300x1900x1000 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 4200x3600x2300 mm; Approx. Machine weight: 10000 kg; Approx. Machine control cabinet size: 1200x800x800 mm; Approx. Machine control cabinet weight: 150 kg.
Technical Parameters Travel of X and Y Axes: 630x800 mm; Maximum cutting thickness: 600/800 mm; Maximum Work piece weight: 1000 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 680x1080x600 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2265x1865x1980 mm; Approx. Machine weight: 3500 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
DK7745 Technical Parameters Travel of X and Y Axes: 450x550 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 750 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 500x750x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1865x1350x1900 mm; Approx. Machine weight: 1250 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 400x500 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 450 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 460x690x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1600x1240x1400 mm; Approx. Machine weight: 1250 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 350x450 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 300 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 400x650x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1200x1170x1400 mm; Approx. Machine weight: 1440 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 320x400mm; Maximum cutting thickness: 400 mm; Maximum Work piece weight: 300 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 360x610x400mm; Surface Roughness /Ra: Ra less than 2.5u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function; Total machine power: 1.8KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001mm; Pulse width adjustable range: 15-150us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1200x1170x1400mm; Approx. Machine weight: 1150kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80kg.
Railway Hydraulic Rail Tensor for Rail Stretching Hydraulic Rail Tensor Itâ??s suitable for 75kg/m and 60kg/m type rail stress relief and seamless long rail relaying. While operating in the field at a certain temperature range being lower than the rail locking temperature, by employing this machine, the length of a rail with zero-stress can be forced to stretch to a length at locking temperature, then re-lock the rail. SPECIFICATION Model YLS-900I Material Stainless Steel Dimensions (L x W x H) (mm) 1300*690*240mm Max. rated working pressure 57Mpa Max. rail pulling force 2*450kN Max. stroke of working cylinder â?¥500mm Two pull rod center distance 535mm Lock mode wedges clamp on both sides of rail head Pump model Honda GXV160 Power 3.05kW Rate of flow 3L/min Machine weight 283kg Internal combustion pump station weight 75kg (not including pipeline)
