Product overview: With the rapid development of China's economy, it has been the trend to change the sizing process of traditional box board paper and corrugated board from the combination method of traditional internal sizing and surface sizing into complete surface sizing. Our company has developed new AKD modified surface sizing agent SA2600 through concentrated development for many years. The product is aggregated by various cation materials through special process and added the cross-linking resin synergist. The product can greatly boost the sizing effect, reduce the AKD hydrolysis and improve paper moisture regaining. The product not only can provide excellent high water-resistance performance, but also can boost the surface strength of paper. The product is used in the box board paper and high-strength corrugated paper produced from waste carton. Technical specifications Appearance: Milky white liquid Solids content: 25 �±1% pH value: 2-4 Viscosity: â?¤ 50 mPa.s (25 oC) Ionic type: Cation Solubility: Soluble in water. Performance characteristics 1. It owns excellent water resistance performance and thermal water resistance performance. 2. It can shorten the curing time, and isn't easy to regain moisture. 3. The consumption of internal sizing agent is reduced to decrease production cost. 4. It can significantly improve the interface strength of paper. 5. Compared with the Cation styrene acrylic surface sizing agent, the product reduces its dependence on aluminum sulfate. The less or no aluminum sulfate can be used to improve the paper folding resistance. 6. The product is good in mechanical stability, and few bubbles are generated in the operation process. 7. The product can be used separately or matches with styrene acrylic surface sizing agent. Usage tips Consumption: In case of separate use, 2-6 kg/ton paper is used. In case of matching with styrene acrylic surface sizing agent, the 1-3 kg/ton paper is used. The specific consumption needs to be adjusted according to the water absorption indicator requirements. During use, the pasted starch glue solution is cooled to below 65�°C, and the stock solution of the product is added to the starch glue solution tank, and is mixed evenly before sizing; Or the metering pump is used to add starch glue solution to pipeline for continuous adding. Starch glue solution can be added aluminum sulfate or not according to the actual conditions. The PH value of glue solution in glue solution tank is controlled at 3.5-4.5 upon the use of aluminum sulfate. In case of matching with styrene acrylic surface sizing agent, the aluminum sulfate of glue solution in sizing tank is controlled at 3.5-4. Packing and storage It is packaged in 200kg and 1000kg plastic bucket and is stored in cool place (5-30C) to avoid freezing and solarization. Storage life: 3 months
Xiongcai E3 Motor Controller For RC Car Performance, Handling and Reliability, We have All Xiongcai has stayed focused on motor controller for automotive fuel pump, water pump, RC car & truck, drones and medical devices since 2011, and focusing on motor controller only. I know that our clients can search a lot of companies that manufacture motor controller, but you will find that most of them provide OEM only. We are one of the few motor controller suppliers providing a full service from design to supply of finished product. Engineered from ground up, we provide solution according to customerâ??s application. For example, Xiongcai designed a high performance motor controller for RC car for a client. I believe most of manufacturer could make powerful motor controller, but the most important thing is how to control the power and eliminate the negative impact. Xiongcai E3 motor controller is such a perfect product for RC car for a notable brand. With 400A continuous current, 800A peak current, 6-12S Lipo cells, 16-54v high performance power system, how to control the monster? Xiongcai RD team designed perfect protection measures to protect the motor and keep it work at its best. a. Peak current limit. This measure will limit the peak current to avoid damage to motor; b. Single PWM periodical current detection limit enables reducing impact of pulse current to motor; c. Intelligent thermal management. Fans will be turned on or turned off automatically according to internal temperature; also when abnormal heavy current is detected, the motor controller will cut off power supply to fan, d. When a short-circuit takes place in fan, the test mode will start running. If the fan canâ??t be recovered in three times test, the power to fan will be cut off, and the ESC is still working; And there are some more protection measures, including low voltage protection, throttle loss protection, abnormal braking protection, over-temperature protection etc. Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Kesen, Unicent and more. We can put your RC car in extreme.
Xiongcai XC303 motor control (ESC) is engineered for medical bone drill. Xiongcai XC303 electronic speed control (ESC, motor controller) is packed with a potent combination of hardware and software advancements. This product is designed for MECIAL DEVICE SUCH AS BONE DRILL, GRINDER, PEDAL TYPES. In April, a client from Brazil sent us a message, inquiring about motor controller for Stryker bone drill. He said he was running the maintenance business for several notable brands, and seeking for partner in providing motor controller. In the past years, too many damaged Stryker bone drill have been abandoned due to lack of repair and short of motor controller. He saw our motor controller XC303 on internet, and found that the performance of our parts was similar with original Stryker7. Whether we can send him samples for test. We show him the detail of our products, especially the installation dimensions and operation rules between triggers and Hall sensors. He confirmed the following item complying to his tool, and wished to test parts. a) this product can be inserted into handle and fixed with our any loose; b) The magnets fixed on the trigger align with Hall Sensors; c) The max range between magnets and Hall sensors is greater than 5.5mm(for cutting off the magnetic field and stopping completely) and the minimum range is zero(for maximizing the performance of bone drill). The samples were charged but we promised that expense would be refunded in mass production. This client order 3 pcs each for single trigger and dual trigger. Three week later, client came back to us and told us the bone drill were working well, XC303 motor controller matched Stryker7 exactly, and working as excellent as original products. Xiongcai XC303 ESC will promote the performance to a new level. Xiongcai is serving top clients in multitude of industries, such as automotive fuel pump, water pump, medical devices, electrical tool, we are partnering with top clients in their lines, ACHR, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto(FLACC), Keshen, Unicent and more. Our team is capable of excellent RD ability, if you have any special requirements on your motor control, we will help you achieve your ideals. Contact us and have a try, we are ready to put your device in its best.
Description for S&S Cycle T124 Long Block Black Edition Engine with 585 Camshafts The Black Edition S&S motors combine classic wrinkle black with high gloss covers for a subtle contrast and elegant look while still producing the power and reliability you've come to expect from S&S, which is legendary performance Durable powder coat finish, wrinkle black cases, cylinders and heads, and gloss black covers are all a part of this engine No fuel or ignition systems included, upgrade to your choice of performance intake, throttle body, and ignition Special machined heads to fit stock length manifolds (S&S manifold size 405) Super Stock T2 crankcase, which is stock looking, but stronger Thicker wall made of 356-t6 aircraft grade aluminum Three Piece Flywheel assemblies with main shaft integrated into the flywheel forging, continuing to keep the stock diameter crankpi Stronger design due to superior materials, updated production techniques, and patent pending designs S&S high flow oil pump and cam cover S&S Easy Start gear drive 585 cam Stock 96 Twin Cam bolt patter Forged dished piston 4-1/8 bore 4-5/8 stroke 10.2:1 compression ratio Requires oil line installation kit 434-336 for 1999-2006 FLT models, 434-335 for 1999-05 Dyna models 58MM throttle body highly recommended Carbureted engines will require a performance ignition module that allows adjustments to the advance curves S&S engines are shipped without oil 2 Year Warranty
Description for S&S Cycle T111 Long Block Black Edition Engine with 585 Camshafts The Black Edition S&S motors combine classic wrinkle black with high gloss covers for a subtle contrast and elegant look while still producing the power and reliability you've come to expect from S&S, which is legendary performance Durable powder coat finish, wrinkle black cases, cylinders and heads, and gloss black covers are all a part of this engine No fuel or ignition systems included, upgrade to your choice of performance intake, throttle body, and ignition Special machined heads to fit stock length manifolds (S&S manifold size 405) Super Stock T2 crankcase, which is stock looking, but stronger Thicker wall made of 356-t6 aircraft grade aluminum Three piece flywheel assemblies with the main shaft integrated into the flywheel forging, continuing to keep the stock diameter crankpi Stronger design due to superior materials, updated production techniques, and patent pending designs S&S high flow oil pump and cam cover S&S Easy Start gear drive 585 camshafts Stock 96 Twin Cam bolt patter Forged piston 9.8:1 compression ratio 4-1/8 bore 4-1/8 stroke Requires oil line installation kit 725-169 S&S engines are shipped without oil 2 Year Warranty
Product Description It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features: Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 4 pieces of vacuum tubes as one unit. Tankless: Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. Pressurized mode: the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Flexible installation position Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Installation method: vertical, horizontal, inclined etc. installation Limescale prevention: Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry. Excellent insulation: Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C. The highest energy efficiency: due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest. Automatic anti-freeze function: when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature. optional devices: electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.
Product Description It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features: Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 3 pieces of vacuum tubes as one unit. Tankless: Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. Pressurized mode: the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Flexible installation position Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Installation method: vertical, horizontal, inclined etc. installation Limescale prevention: Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry. Excellent insulation: Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C. The highest energy efficiency: due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest. Automatic anti-freeze function: when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature. optional devices: electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.
Stages of using the sterilization station 1- washing hands with water and soap 2- Drying hands 3- Disinfection of footwear 4- 360 disinfections for the whole body during drying up the hands (optional) 5- Disinfection of hands (optional) Sterilization station equipment 6- Photocell Soap Dispenser 7- Compulsory two-hand wash basin with sensor 8- Hand dryer 9- Sole cleaning brushes 10- 6 legs for fixing and changing the machine's height off the ground 11- Indicator lights to indicate the machine's condition 12- Welded drain tube behind the equipment 13- 2 stainless steel steps 14- Protective steel bars 15- Emergency stop button Other equipment that can be added to the sterilization station: Tissue box holder and a trash can Hair-net box holder and glove box holder Hand Sanitizer with Stainless turnstile gate Body essential for disinfection 8x spraying points for Body disinfection (360 Degree Rotation simultaneously) Sterilization station specifications 1. Sterilization station specifications 2. Type of protection: IP65 3. All parts of the sterilization station are made of 304 stainless steel 1.5 - 3mm 4. All wear parts are made from the highest-grade material 5. Strong Chassis - Insulated Welded - Industrial Design 6. Brush length: approx. 1000mm easily cleanable 7. Electrical connection: 220-250V / L + N + PE, 50-60Hz 8. Nominal power 1,0 kW 9. Control voltage valve and pump for disinfection and water: 24 V DC 10. Control voltage turnstile actuation: 24V DC 11. Control system: PLC Delta 12. Changeable parameters for all disinfections 13. Isolated electrical panel inside the body 14. Dimensions (LxWxH): 2700x1050x1750mm 15. Shipping dimensions (LxWxH): 2150x1200x2000mm
Product overview WS-4089 is a kind of cationic polymer of polyamide & epichlorohydrin. It can be retentioned via effectively being attracted by pulps with negative charges at fast speed. The thermosetting chemical reaction will be resulted in at the dry section of dryer. The high wet strength of paper is from the stable chemical binding Technical specifications �· Appearance: Light yellow transparent liquid �· Ionic type: Cation �· Solids content: 12.5 �±0.5% �· pH: 3-5 �· Viscosity(25�ºC): â?¤ 100 mPa.s Performance characteristics WS-4089 is easily absorbed by fibers and can be gelatinized at medium or alkaline conditions. It is widely used in papers that need higher wet strength, such as tissues paper, decoration base paper, coated paper, map paper, food package paper, fruit bag paper, medical paper. Usage tips 1. Dosage: 5 kg to 30 kg for each mt of absolute dry pulp (or as per paper sheet situation) 2. It can be used in paper making afte adding into head box continuously via meter pump 3. It performs best at neutral and alkaline conditions. Packing and storage The package can be 200 Liters, 1000 Liters drum or as per clients' requests. It should be stored in cold place. The shelf life time is around 6 months.
---------Description--------- ! We provide installation work and operational training for all of our equipment! Fixed Crushing-Screening & Sand Washing plant is another type of mining equipment solution that is targeted for hard stone types with sandy physical composition like Riverstone, where sand separates from the stone after the crushing process and neeeded to be washed away. After completion of crushing process, the product is sorted into necessary fractions and the smallest size product is sent to the helix/screw sand washer and after to the final stockpile conveyor belt. The process of washing that begins at the vibrating screen with the use of water pump tubes at each layer, continues at the sand washer, therefore sending both sandy water and sorted product to the helix washer. Depending of initial stone size, jaw crusher can be added at the primary stage. In our case, the stone is smaller than 400 mm, therefore we use secondary impact crusher and vertical shaft impact crusher. Crushing-Screening Line consists of: Secondary Impact Crusher 1120 x 1500 mm Vertical Shaft Impact Crusher 900 mm Inclined Vibrating Screen 2000 x 6000 mm (2 pcs) 600 x 6000 mm helix sand washer (2 pcs) Main, stockpile, feedback conveyor belts All intersystem electrical cables Control panel with control system Feel Free To Contact Us For Any Additional Information!
Xiongcai XC303 Motor Controller Provides Equivalent Performance to Stryker's Products Xiongcai has been focusing on motor controller for automotive fuel/water pump, RC car and medical devices since 2011, and focusing on motor controller only. We provide expertise and solution. In earlier October, one customer from Brazil, found us from internet. He sent an email trying to inquire about motor controller and find replacements to Stryker6/7/8 for his maintenance business on Stryker bone drills, especially the Stryker6/7/8, a lot of damaged bone drill were abandoned due to lack of replacement motor control, because he could find a ssupplier providing replacements. Actually we do have some types of motor control for bone drill application, providing equivalent performance. The customer said he bought some replacements before, but after he installed motor controller into bone drill, he found that some of the bone drill failed to work at its best and some of them does not work at all. We ask him to send us some pictures of components. After checking the PCB, we found that the triggers of bone drill and Hall sensors did not match precisely. The distance of triggers is not the same with the distance between Hall sensors. In this case, the magnet installed on the triggers could not activate the Hall sensors, so the devices failed to work or failed to work at their best. We asked the customer to show us instruction, and check the installation dimensions. Then we recommended two types XCB302 and XC303 motor controller, which matched devices precisely. it's not sophisticated, but it needs profession, not only technology, but also service. The customer said the previous supplier did not check the detail and just sold him products, and he wanted to bought several pieces each from us for test because he felt that we were responsible and professional. Three weeks later, customer came back to us and told us the motor controller had been installed perfectly and worked at their best. Xiongcai Technology investment into research and development enable the company to be at the leading edge of technological development, delivering excellent products to customers. Xiongcai motor controllers have been applying in top brands in automotive industries, such as Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto (FLACC), Kesen, Unicent and more. Contact us and have a try, or google Shenzhen Xiongcai Technology, we will deliver efficient solution to you according to your ideas.
BRAVE 26 TON VERTICAL/HORIZONTAL GAS LOG SPLITTER Price:$1,095.08 SKU:VH1326VN Brand:Brave Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features 26 Tons Of Splitting Force Designed for heavy usage - split up to 250 cords per season Split Wood In Horizontal Or Vertical Positions Split smaller logs at comfortable waist height Switch to vertical, save your back & roll large logs into place Heavy Duty 10HP/305cc Briggs & Stratton Vanguard 4-Cycle Engine OHV design for increased efficiency and optimal power transfer 2-Stage, 16 GPM Hydraulic Pump Productive 14 second cycle time with auto-return 5.4 gallon hydraulic system; hydraulic fluid not included 6-Inch High Carbon Steel Splitting Wedge 25" log opening on 3" x 6" reinforced steel beam 26.5-inch working height from ground to top of beam Includes log dislodger High Speed 4.80 x 8 Highway Rated Tires 35 mph maximum towing speed Includes safety chains and 2" hitch coupler Specifications Engine Engine Brand Briggs & Stratton Starting System Recoil Start HP 10 HP CC 305 CCs Fuel Tank Size 0.875 Gallons Low Oil Shutdown Yes Hydraulics Auto Return Yes Hydraulic Filter Yes Hydraulic Oil Included No Hydraulic Reservoir Size 5.4 Cylinder Diameter 4.5 Inches Cylinder Length 24 Inches Cycle Time 14 Seconds Tonnage 26 Tons Wedge Wedge Material Steel Wedge Size 6 Inches Wedge Style 2-way Replaceable Wedge Yes Sharpenable Wedge Yes Log Capacity Max Log Length 25 Inches Towing Towable Yes D.O.T. Lights No Fenders Included Hitch Type 2 Inch Ball Hitch Max Towing Speed 35 MPH Accessories Jack Stands Included Log Cradles Sold Separately Overview Assembly Required Yes Weight 500 Pounds Product Length 81.5 Inches Product Width 40.0 Inches Product Height 36.0 Inches Consumer Warranty 2 Years Commercial Warranty 1 Year
Product overview: CRM-8501 is an organic polymer compound of cation quaternary ammonium salt type. The advanced technology and raw materials are from developed countries. The characteristics are as below: The effective concentration is 10 times or 15 times higher than common retention acid liquid. It has better fluidity, easy & fast dissolution, no caking or granularity phenomenon. It has very good adaptability and can adapt to kinds of papers of kinds of pulps. Product function mechanism during the paper-making process 1. To neutralize the paper surface charge. The pulp and filler are of negative charges and the charges can be neutralized and decreased by adding into CRM-8501so as to form micro-floc when the potential towards zero. 2. To be inlaying effect. The electrostatic of positive charge on CRM-8501 surface can attract pulps and fillers whose surface is of negative charges. 3. To be bridging effect. Higher molecular weight and longer enough molecular chain will result in bridging between fines and fillers so as to form micro-floc. 4. The micro-floc of fines and fillers will decrease the porous structure blockages of wet paper layers and increase the permeability properties of papers. Appearance: Milky white liquid Solids content: 38�±1% pH value: 3-6 Viscosity : â?¤ 500 mPa.s Performance characteristics 1. To increase the retention rate of paper fines and fillers dramatically so as to decrease the pulp consuming qty. 2. To decrease the concentration of whitewater, wastage of fines&fillers and the whitewater pollution. 3. To increase the permeability properties of pulp and the wet strength of paper. To increase the production speed of paper-making machines so as to increase the production. 4. Without any pungent odor. And has better fluidity under lower temperature Usage tips Dosage: Around 0.3 kg to 0.8 kg per mt paper ( adjust as per different pulps and production processes) To add CRM-8501 evenly and slowly into dilution tank with ready water. And add additional water till requested qty ( the dilution concentration of CRM-8501 is usually 1-3). To stir the diluted concentration for around 20 to 30 minutes before entering into paper-making system via flow pump. Packing and storage The package is 200 Liters plastic drum or 1000 Liters IBC drums or as per clients' requests. It should be stored between -5C-30C. The shelf life time is 3 months. To wave the CRM-8501 before dilution and the diluted liquid can be stored 3 days at most.
Half Balance Exercise Pilates Ball, Custom Logo Half Balance Ball, Gym Half Balance Ball Price Half Balance Ball System Parameters: Product Name Gym Stability Pvc Half Balance Exercise Pilates Ball Material: PVC Color: Red/Blue/Purple or Custom Color Size: 58*60*22 or Custom Size Logo: Custom Logo Could add customized logo on Stability Ball with Pump MOQ: 50pcs Delivery time: (1)7-10 working days-for existing products (2)10-15 working days-if need customized logo OEM Service: Yes Certification Available: Yes Packing details: Poly Bag+Carton Production Capacity: 50000 Piece/Pieces per Month Payment Term: L/C,T/T,D/P,PAYPAL,Trade assurance Half Balance Ball Description: Half exercise ball combines all the elements of fitness cardiovascular toning and flexibility into unique and highly effective combinations.Challenging and fun, half exercise ball gives a whole new meaning to "moving with control" as you work out on an unstable, dynamic surface.Half balance ball for strengthening and coordinating core muscles strengthens, trims and tones while improving balance and coordination. 1. Half exercise ball combines all the elements of fitness cardiovascular toning and flexibility into unique and highly effective combinations. 2. Challenging and fun, half exercise ball gives a whole new meaning to "moving with control" as you work out on an unstable, dynamic surface 3. Work out on an unstable dynamic surface,can improve one's balance and coordination. 4. By adding an element of instability it forces your body to use more muscles from your core. 5. Perfect for physical therapy and recovery exercises. 6. Balance ball trainer for strengthening and coordinating core muscles. 7. Strengthens, trims and tones while improving balance and coordination. Bingehua specializes in the production and export of fitness accessories, body-sculpting and power training goods, mainly including yoga ball, Resistance Band Loop, Half Yoga Ball, etc. Our own factory was founded more than 10 years.
Price:$2,138.73 Brand:Cub Cadet Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features Mower Is Too Large To Fit On Lift Gate For Delivery Must have a loading dock or fork lift @ delivery locale to unload 25HP/725cc Kohler 7000 Series V-Twin 4-Cycle OHV Engine Dual-seal air filter keeps debris out of the engine Fully pressurized lubrication with spin-on oil filter Dual Hydro Gear ZT2800 Hydrostatic Transmissions 10cc pumps and 16cc wheel motors on each drive wheel Includes oil reservoir for easy serviceability 60-Inch Fabricated (Welded) Floating Mower Deck Heavy duty 11-gauge steel w/ 3 blades and geaseable spindles Convenient electric blade engagement 13-position, spring-assisted deck lift (lever operated) 2 greasable heavy-duty gauge wheels Patented SmartJetâ?¢ high-pressure deck washing system Fully Welded 12-Gauge Steel Frame E-Coat corrosion defense system for protection & durability Curved front axle helps cushion rough terrain for a smoother ride 15-inch Cub Comfortâ?¢ deluxe mid-back seat Ergonomic Lap Bars 3-way adjustable lap bars with foam grips for easy, comfortable steering Specifications Engine Engine Brand Kohler Starting System 12-Volt Key Start Engine Cycle 4-Cycle HP 25 HP CC 725 CCs Fuel Tank Size 2.8 Gallons Engine Cylinders 2 Cylinders Oil Filter Yes Consumer Engine Warranty 2 Years Motor Battery Included Included Battery Voltage 12 Volts Battery Type Lead Acid Deck Cutting Options 3-in-1 (Side-Discharge/Bag/Mulch) Deck Material 11-Gauge Deck Construction Welded Spindle Material Aluminum Blades 3 Blades Deck Positions 13 Positions Cutting Width 60 Inches Cutting Height 1.0-4.0 Inches Deck Lift System Manual Hand Operated Engagement PTO Electric Deck Drive Belt Drive Speeds Variable Maximum Speed 7 MPH Maximum Reverse Speed 3 MPH Drive Wheels Rear Wheels Transmission Type Hydrostatic Drive System ZT2800 Hydro Drive Accessories Rear Bagger Sold Separately Engine Guard No Seat Type Mid Back Hour Meter Included Arm Rests Sold Separately Front Bumper No Trailer Hitch Sold Separately Mulcher Kit Sold Separately Headlights Sold Separately Wheels Front Tire Size 13 x 5 Inch Rear Tire Size 20 x 10 Inch Tire Type Pneumatic Wheels Overview Weight 810 Pounds Product Length 70.0 Inches Product Width 63.5 up/68.0 down Inches Product Height 38.0 Inches Consumer Warranty 3 Years UPC 043033574704
Diesel fuel injection parts, products cover head rotor, feed/supply pump, ve pump parts , diesel nozzle, pencil nozzle, common rail nozzle, nozzle tester, nozzle holder, control valve, magnet valve, regulating valve, delivery valve, diesel plunger/element, diesel injector, test bench, repair kit, oil seal, common rail, drive shaft, cam disk, cross cube..
Item Diesel Fuel Injector Model No 0950006701 MOQ 1pcMaterial Steel Package Details Carton Packing Stock In Stock Brand CNDIP Warranty 6 months
Item Diesel Fuel Injector Model No 0950000800 MOQ 1pcMaterial Steel Package Details Carton Packing Stock In Stock Brand CNDIP Warranty 6 months
Item Diesel Fuel Injector Model No 0 432 193 450 MOQ 1pcMaterial Steel Package Details Carton Packing Stock In Stock Weight 08kgBrand CNDIP Warranty 6 months
Item: Diesel Fuel Injector Model No: 095000-0890 MOQ: 1pc Material: Steel Package Details: Carton Packing Stock: In Stock Weight: 0.8kg Brand: CNDIP Warranty: 6 months
