Wood pallet block machine uses sawdust, wood shavings, etc. as raw materials, is dried by a dryer, and then mixed with glue to form woodblocks. This kind of compressed wood block is beautiful and clean and does not drop slag.
The wood shaving machine has a wide range of applications. The wood shavings can be used as the materials for making plywood, wood pulp paper in paper mills, as the filling materials for pet and poultry breeding bedding
This wood debarker machine has the advantages of compact structure and simple operation. This new log debarking machine can better peel dry and wet logs with a diameter ranging from 150mm to 360mm.
The wood shaving machine has a wide range of applications. The wood shavings can be used as the materials for making plywood, wood pulp paper in paper mills, as the filling materials for pet and poultry breeding bedding, fragile goods transport cushion, or as biomass energy fuels, and so on. It is suitable for small and medium-sized enterprises and individual wood processing households.
Model: MF09 Min diameter of Arc band;40mm Feeding speed 0.5-5.3m/min Tape thickness 0.3-3.0mm Working temperature 120-150 Degree Total power: 765W Glue pot measurement 270ML Net/Gross weight 9.5/14kgs Packing size: 465*430*515mm
The wood peeling machine also called the wood debarking machine, belongs to a series of wood processing machinery products. As its name implies, the equipment is used to peel off the bark of wood. The peeled wood is better for the further process so as to bring more profits.
-> Speed Conveyors are controlled wood Carrier (size 130 x 60 cm) Fhgkkx9sw -> Adjustable Height Blade (the desired wood shaving thickness can be adjusted) -> Wood Carrier is Konvi Speed Controls (wood shaving Size is set at the desired figure) -> Machinery Spare Parts is our standard production can be obtained from anywhere. -> blower fan -> Can be used for horse or chicken. Technicial Specifications Model : 4 YT - 60 Number of Rollers : 4 Blade Length : 60 cm Number of Blades : 7 x 4 = 28 Motor Powers : 4 * 7,5 KW = 30 KW - Total Engine Power : 33 KW Cutting Setting : 0.5 mm - 2 mm Machine Weight : 2400 KG Production Capacity : 900-1250 kg / h 380V- 50 HZ
The drum wood chipper machine is commercial wood processing equipment for making wood chips on a large scale. Drum chipper is a kind of practical equipment for processing all kinds of wood. It is widely used in the pre-processing stage for manufacturers of particleboard factory, medium, and high-density board factory, bio-power plant, and wood chip factory. https://charcoalmachines.com/drum-wood-chipper-machine/ Logs and small-diameter wood can be cut into high-quality industrial wood chips with uniform length, flat cut, and uniform thickness by this large wood chipper, and it can also cut branches, slabs, and plates.
The Wood Shaving Machine is a new type of wood processing equipment. The shaving machine can process logs such as sticks, branches, boards into thin shavings. There is no difference between machine-made shavings and hand-made shavings. The shavings are of moderate size and uniform thickness and can be customized according to customer requirements. Our wood shavings machine is easy to operate, compared to the traditional operation greatly improve the speed of shavings production, not only save manpower and time but also improve the production efficiency and keeps up with the needs of social development. The shavings produced by the shaving machine are widely used in particleboard factories, paper mills, biomass energy fuels, pet bedding, poultry breeding bedding, fragile goods transport cushion material, and other industries. It is the ideal shavings processing equipment for small and medium-sized enterprises and individual wood processing households.
Product Introduction The sawdust dryer is used for pellet sawdust or powder sawdust. Wet materials are continuously sent into drum through screw conveyer and then get separated and pushed by high-speed hot flow. The moisture in wet materials is taken away in this process and then we get powder or pellet dry materials. Product Application Sawdust dryer are widely used for the drying of straw briquette, charcoal, wood pellet fuel, sawdust briquette, corn straw, soybean straw, cotton stalk, wheat straw, sorghum stalk, wood shavings, sawdust, gingko leaf, mulberry leaves and other fiber materials. Product Configuration Sawdust dryers are consist of heating furnace, feeding port, drum, filter drum, conveying pipe, cooling drum and discharging port.
The sawdust dryer is used for pellet sawdust or powder sawdust. Wet materials are continuously sent into drum through screw conveyer and then get separated and pushed by high-speed hot flow. The moisture in wet materials is taken away in this process and then we get powder or pellet dry materials. Sawdust dryer are widely used for the drying of straw briquette, charcoal, wood pellet fuel, sawdust briquette, corn straw, soybean straw, cotton stalk, wheat straw, sorghum stalk, wood shavings, sawdust, gingko leaf, mulberry leaves and other fiber materials.
Ring die pellet mills are widely used in the granulation of wood, straw, and other biomass sources. Driven by heavy-duty gearbox construction, it can work continuously in even most adverse conditions. The imported key elements are of high performance with long life and low maintenance cost. The key parts of the ring die pellet mill are made of alloyed steel that is very strong and malleable. Ring die pellet mills die is made of stainless steel. Our ring dies pellet mills capacity ranges are from 200kgs to10T per hour.
Wood Shaving Machine is used to crush wood into shavings and sawdust and is chosen by wood recycling companies and racecourses, good for horse bedding and animal bedding. Also with baler. UK ENERPAT Wood shaving machine is designed to produce wood shavings in desired and suitable size to be able to use them as bedding at chicken farming and horse breeding sectors. There are all adjustment possibilities to get wood shavings in desired size and high quality. Quality Features Automatic running from start to ending Contain-usrunning Preventivesystem for wood jamming Shaving depthcan be adjusted Two motordrive UK safety standard Application Fire wood Logs Timber Scrap wood Scrap furniture Specifications: Model: EWS-37 Motor power: 37KW Max lenght of wood: 140cm Max diameter of wood: 45cm Cutting head: 4sets Blade: 24sets Machine size: 4750 x 1000 x 1800mm Machine weight: 2.8T
This wood sawdust machine is designed to produce wood sawdust in desired and suitable size to be able to use them as many applications .wood sawdust can be used to do the mechanism of charcoal, mushroom cultivation, blackfungus mushroom cultivation, mushroom processing Agaricus bisporus, MDF processing, particleboard processing,fiberboard processing, Zen Incense and mosquito coils manufacturing, paper pulp raw materials, making charcoal fueland other functions. The enerpat ESM-55 automatic wood sawdust machine is one 55kw drive machine,used for making wood from firewood,wood logs and scrap wood .our wood sawdust machine come with automatic re-set function,when feeding thebig size wood into the machine,which can not process,the re-set function will protect the machine and feed back thewood. This sawdust production machine is very specially producing the sawdust from woodlog to sawdust just in one stepwithout hammer mill and grinder process only just one chop-mill. Chop mill producing particle size is 2- 4mm or clientdemanding size maximum 10mm. Lots of European wood pellet producer is changing and using the there wood pelletprocess instead of hammer mill process. It's simple and easy operating and drum knife repairing quiclky also thischop-mill knife life time are 1000Hours production available by normal stone shaving grinder. Chop-mill(sawdustmachine)beaver production capacity is from 25m3/h to 75m3/h range depend on your demading capacity.
Max. working length 1400mm Working diameter range 22~500mm Max. working speed 90-120m/min Veneer thickness 0.5~7mm Double rollers motor power 7.5kw x 2sets Single roller motor power 7.5kw x 2sets Screw Feeding motor power 11kw Rotary clipper motor power 2.2kw Rubber belt conveyor motor 2.2kw Machine size 4700x1900x1500mm Machine weight 7000kgs Total power 45.4kw Remark Including 6 meter veneer conveyor
1. The main structure is strong with enough rigidity and high stability. 2. High efficiency, one shift working can produce 4000(16mm) sheets. 3. High precision anti-wearing guide rail, diagonal error
Technical Parameters: Model Single/Double side glude spreader Roller Dia customized Roller length 2500MM Linear speed 20-50M/min Total Power 7.5 KW Weight 2200kgs Dimension 3400*1750*1900MM Usage: 3 Roller and 4 roller glue spreader are avaliable Single side and double side, 4 Ft and 8 Ft Glue spreader is mainly used in multi layer board, veneer, block noard and so on. The machine has resonable design, can save production cost and is easy to operate.
1.Technical Parameters: Model RBD1400 Max dia of log 500MM Max length of log 1400MM Linear speed 45M/min Total Power 19 KW Weight 3200kgs Dimension 3600*2100*1600MM 2.Features: 1.Log rounding debarker is used for peeling off the log skin and make the raw log to be round, after debarking it will be easy for the peeling lathes to peel and the veneer thickness will be even without big variation. 2. It also can increase the peeling lathes working life. 3.One set debarker can work with two sets of peeling lathes, it can save labor.
1. Product Features: 1.Used for poplar core veneer peelig and cutting. 2.Veneer thickness is adjustable, double sides smooth. 3. Peeling speed is adjustable. 4.High/Normal speed avaliable, double power. 2. Technical Parameters: Max Wood dia: 500mm Max length of Log: 1400mm Dia of left wood: 26mm Veneer thickness range: 0.5-7mm Peeling Speed: 55- 100M/MIN avaliable Total Power: 41.4kw Overall dimension: 4900X2000X1550mm Total Weight: 7000kg
1.Product Description: 1.This machine is used to peel log without skin to core veneer and continue peeling log core after spindle peeling. It is very popular for plywood industry. 2. CNC Spindle less Veneer Peeling Lathe, with hydraulic system for knife installation which makes easy to change knife when need to grind and save time. 3. Servo motor, Precision hardened gear reducer. 4. Japanese Mitsubishi CNC system . 5. We have 4f, 6f and 8f to meet different requirement. You can choose it according to your demand.