Model GQ40A Blade 26mm Plain carbon steel �Φ40mm Deformed steel bar �Φ32mm Square steel bar �32mm*32mm steel angle bar �50mm*50mm steel flat bar �70mm*15mm Motor power 3/2.2KW motor speed 2890r/min Voltage 380V/220V Weight 450KG Size 1250*500*730mm G.W.(KGS) 430 N.W.(KGS) 398 -
1.6511 Steel Characteristics 1.It has great atmospheric corrosion resistance, fatigue resistance and strength. 2.Stay excellent toughness, wear resistance and fatigue strength after heat treated. 3.It is alloy steel with low carbon and high nickel. About the coating and softening for leather knife sheath, it is a great choice. 4.4340 alloy steel bar is used widely in the aerospace industry because of great strength. 4340 alloy steel is used to manufacture large and medium-sized plastic molds that require high strength and toughness. And it is used for making important quality controlling parts with good toughness, high strength, and large size, such as heavy machinery and high load shafts, dia of turbine shafts is larger than 250mm, helicopter rotor shafts, turbojet turbine shafts, blades, high-load transmission parts, crankshaft fasteners, gears and etc. After nitriding, it also can be used to make important parts for special performance requirements. And it will be a great material for high strength and good plasticity parts after low-temperature tempering or isothermal quenching. Forging of 4340 alloy steel: 4340 steel is first preheated up to 1150C 120C for forging until uniform temperature throughout the section Do not forge below 850 C, 4340 has good forging characteristics, but care must be taken when cooling as the steel can easily crack. After the forging operation, the workpiece should be cooled as slowly as possible. It is recommended to cool in sand or dry lime etc. Feel free to contact us
A)CAPACITY: 12,000MT B)EQUIPMENT: 2 pre-straightening units. 2 combined drawing units with a speed of 55 m/min. 2 straightening units. 2 vertical type roll straighteners. 2 polishing units. C)PRODUCT SPECIFICATIONS Bright Bars Size Range : 5 - 16 Mm Length : 3 - 6.2 Finish : Cold drawn Tolrance : H9, H10, H11, H12, K12, K13 Supply Condition : 3 - 10 mm annealed + cold drawn + polished Square : 6 - 12 mm Finish : Mirror finish Tolrance : H11 Supply Condition : 11 - 22 mm annealed + cold drawn polished/centerless ground Hexagon : 6 - 13 mm Tolrance : H11 Supply Condition : 23 - 110 mm annealed/hardened + tempered + smooth turned + polished/centreless ground GRADES AISI:201, 202, 301, 303, 304, 304H, 304/304L, 316, 316H, 316/316L, 309, 309, 309S, 310, 310S, 316Ti, 317, 317L, 321, 321H, 410, 416, 420, 430, 430F, 431, 17-4PH, F51 and F60. *Specialised grades also available as per customer requirements. D) PACKAGING: Each bar is colour coded and then wrapped in HDPE cloth.
A)Product Specifications BARS Size Range : 36 - 110 Mm Length : 3 - 6.5 M Supply Condition : Hot rolled, annealed, hardened and hardened + tempered GRADES AISI: 201, 202, 301, 303, 304, 304H, 304/304L, 316, 316H, 316/316L, 309, 309, 309S, 310, 310S, 316Ti, 317, 317L, 321, 321H, 410, 416, 420, 430, 430F, 431, 17-4PH, F51 and F60. *Specialised grades also available as per customer requirements. B) PACKAGING: Packing is done using a variety of protective materials and distance rings, and then placed in the strong plywood boxes to ensure safety of material during transportation
TMT bars.TMT bars
Steel Bars And Profiles: Product Description : Round Bars : bright bars - 5mm to 120mm Forged bars - 125mm to 500 mm Flat Bars : Size - 25mm to 150mm Thickness - 5mm to 20mm Angles : Size - 19x19 to 101.6x101.6 thickness - 3mm to 12.7mm AISI : 201, 202, 301, 302, 303, 304, 304H, 304L, 316, 316H, 316L, 309, 309S, 310, 310S, 316Ti, 317, 317L, 347, 321, 321H, 410, 416, 420, 430, 430F, 431, 440C, 630, 17-4PH, F51 DIN : WNR1.4301, WNR1.4305, WNR1.4306, WNR1.4307, WNR1.4401, WNR1.4404, WNR1.4571, WNR1.4541, WNR1.4828, WNR1.4841, WNR1.4845, WNR1.4449, WNR1.4438, WNR1.4310, WNR1.4550, WNR1.4541, WNR1.4878, WNR1.4006, WNR1.4005, WNR1.4021, WNR1.4028, WNR1.4016, WNR1.4104, WNR1.4105, WNR1.4057, WNR1.4542, WNR1.446 Key Specifications/Special Features : Cold Drawn, Centreless Ground, Peeled & Polished, Rough Peeled or Smooth Turned bars, Chamfered, Soft Annealing, Solution Annealing, Oil & Water Quenching, Tempering & Normalizing Hot rolled, annealed, pickled and shot blasted. Product origin : India, China, Thailand, Malaysia, Turkey, Ukraine, Etc. Minimum Order Size And Packgaing Details : Any. Packaging As Per Customer Requirements. Sea-worthy.
Steel Bars And Profiles: Product Description : Round Bars : bright bars - 5mm to 120mm Forged bars - 125mm to 500 mm Flat Bars : Size - 25mm to 150mm Thickness - 5mm to 20mm Angles : Size - 19x19 to 101.6x101.6 thickness - 3mm to 12.7mm AISI : 201, 202, 301, 302, 303, 304, 304H, 304L, 316, 316H, 316L, 309, 309S, 310, 310S, 316Ti, 317, 317L, 347, 321, 321H, 410, 416, 420, 430, 430F, 431, 440C, 630, 17-4PH, F51 DIN : WNR1.4301, WNR1.4305, WNR1.4306, WNR1.4307, WNR1.4401, WNR1.4404, WNR1.4571, WNR1.4541, WNR1.4828, WNR1.4841, WNR1.4845, WNR1.4449, WNR1.4438, WNR1.4310, WNR1.4550, WNR1.4541, WNR1.4878, WNR1.4006, WNR1.4005, WNR1.4021, WNR1.4028, WNR1.4016, WNR1.4104, WNR1.4105, WNR1.4057, WNR1.4542, WNR1.446 Key Specifications/Special Features : Cold Drawn, Centreless Ground, Peeled & Polished, Rough Peeled or Smooth Turned bars, Chamfered, Soft Annealing, Solution Annealing, Oil & Water Quenching, Tempering & Normalizing Hot rolled, annealed, pickled and shot blasted. Product origin : India, China, Thailand, Malaysia, Turkey, Ukraine, Etc. Minimum Order Size And Packgaing Details : Any. Packaging As Per Customer Requirements. Sea-worthy.
Similar grade: aisi-d2, skd11, dc11, k100, din 1.2379 Chemical composition: Steel grade: gb cr12mo1v1 C Si Mn P S Cr Mo V 1.40-1.60
The raw material billet for producing stainless steel flat bar is low carbon square billet and the stainless steel bar. Steel bar is delivered as hot rolling forming, normalizing, or hot rolling. Most of the flat bars find its application in construction industries in the form of base plates and brackets.
These weight bearing bars have their end use in construction industries with the possibility of tailor made sizes. It can be used as bridge, frame, fence, transmission ship, vehicle, fasteners etc.. Stainless steel hexagonal bar is hexagonal, solid long stainless steel material. It's widely used in marine, chemical, construction etc. due to the characteristics of the stainless steel hexagonal rod.
SS round bar is one of the most vital players in the machining industry. With the fabulous property of corrosion resistance, SS round bars are employed in manufacturing industries that are indulged in the production of fasteners and machineries. Stainless steel round bar is cold drawn of stainless steel black bar via cold rolling machine to remove a layer of black on the surface. Stainless steel round bar are generally cold drawn, finely ground or polished, with good surface brightness and wide application. We source this range of bars from the established vendors of the industry and ensure that it is in compliance with the fixed market norms and standards. Our entire product range is abrasion resistant in nature and has smooth finishing. Grade :- SS 304, SS 304L, SS 316, SS 316L, etc
Cld rolled ribbed reinforcement meshalso named: reinforcing welded mesh, welded reinforced mesh, reinforcing mesh, reinforcing weld mesh panels, reinforcing mesh, construction reinforcing mesh. Cold rolled ribbed reinforcement mesh assortment:cold-rolled ribbed reinforcing mesh, hot-rolled ribbed reinforcing mesh, the most widely application of cold-rolled ribbed steel mesh; Cold rolled ribbed reinforcement mesh is hot rolled wire rods by the multi-channel cold reducing pressure rib and the elimination of internal stress formed with two or three surfaces on the crescent shaped reinforced. The mesh is welded by the cold ribbed steel net. He in the prestressed concrete is the update to the cold drawn low carbon wire replacement products, substitution reinforced grade i, is a better similar processing of cold drawn steel. Cold rolled ribbed reinforcement mesh material: crb550 cold-rolled ribbed steel bar, crb550 cold drawn round steel bar, hrb400 hot rolled ribbed bar
Cld rolled ribbed reinforcement meshalso named: reinforcing welded mesh, welded reinforced mesh, reinforcing mesh, reinforcing weld mesh panels, reinforcing mesh, construction reinforcing mesh. Cold rolled ribbed reinforcement mesh assortment:cold-rolled ribbed reinforcing mesh, hot-rolled ribbed reinforcing mesh, the most widely application of cold-rolled ribbed steel mesh; Cold rolled ribbed reinforcement mesh is hot rolled wire rods by the multi-channel cold reducing pressure rib and the elimination of internal stress formed with two or three surfaces on the crescent shaped reinforced. The mesh is welded by the cold ribbed steel net. He in the prestressed concrete is the update to the cold drawn low carbon wire replacement products, substitution reinforced grade i, is a better similar processing of cold drawn steel. Cold rolled ribbed reinforcement mesh material: crb550 cold-rolled ribbed steel bar, crb550 cold drawn round steel bar, hrb400 hot rolled ribbed bar Cold rolled ribbed reinforcement mesh size:d5,d6,d7,d8,d9,d10,d11,d12,e5,e6,e7,e8,e9,e10,e11,e12
Steel bar mesh Steel bar mesh other name reinforced welded mesh, reinforcing mesh panel, building reinforcing mesh, cold rolled ribbed reinforced mesh, reinforcing mesh without rib (Bridge reinforced mesh, coal mine reinforced mesh) Steel bar mesh workshop cover an area of 2000 square meters, article 2 the large steel bar mesh running water production line; Daily production capacity of 56 tons; Products comply with both mechanical properties and process performance; The technical specification for concrete structures of steel bar welded mesh(JGH114-2003), the reinforced concrete welding net(GB/T1499.3-2010)and the cold rolled ribbed bar(GB13788-2088)standard and design requirements. The material of reinforced mesh and welded reinforced mesh:CRB550 HRB400 APB550 The specifications of reinforced mesh and welded reinforced mesh: Wire diameter: 5-18mm Aperture 10mm*10mm---200cm*200cm Mesh size is a square in commonly and also is rectangular mesh(100*150; 100*200) Widest: 3m the longest:17m In order to transportation of convenience suggested width in 2.3m length in 6m. Reinforced mesh widely used in multi-storey and high-rise buildings, airport runway, highway, tunnel, subway, the air raid shelter, concrete piped, bridges, water conservancy am foundation , docks,warehouses, and a sewage treatment pond of reinforced concrete structure.
Specifications-steel truss 1. Upper wire diameter : from 5-12mm 2. Lower wire diameter :from 5-12mm 3. Diagonal wire diameter: from 4-10mm 4. Steel truss length:from 3-12m 5. Steel truss width:100-150mm 6. Steel truss height: from 100-150mm Applications for steel truss: 1 steel truss applied to precast slabs, pre-high-speed railway sleeper. 2 used in many high-rise, ultra- high-rise steel buildings 3 used for steel building, mezzanine floor of “loft” 4 the force applied to the complex, special-shaped structure, building 5 used in-situ concrete structure(rc) buildings 6 used in the construction of slope roof structure Product advantages & features for lattice girders Advantages economy: the mode of truss is reasonable with low price and has an obvious advantage in this area; can be designed as double-sides deck. Convenient: shorten the project construction time; reduce temporaty support. Security: good performance of cracking resistance and fire resistance; Reliability: good property to prevent earthquake. (1)light in weight , high intensity, huge loading capacity as well as good anti-earthquake capacity. (2)simple in construction operation, easy to install. (3)can act as a part of the structure of weight bearing, to reduce the cost of material. (4)put the panel above the welded wire net fill cement between them. (5)this type of floor decking sheet has the strong friction between the concrete and floor slab, being fire resistant. (6)this deck is connected with steel bar , making it have the higher strength.
We can provide our Customers with Finest Precision Quality Stainless Steel Bright Bars. Grades - AISI 200, 300, 400 Series Size Available - 1.20 to 14 mm Surface Finish - Bright Polished, Bright Chamfered & Polished
MANUFACTURE STANDARD:ASTMA666-96/GB4226-84 stainless steel flat bars(Cold drawn,bright and polished) 201,201+Cu,202,204+Cu,301,303,302,304,304L,316,316L,310,321,410,416,420,430,430F,431,others 3-25mm thickness*20-200width*length3-6mm cold drawn bright bars and polished 3 upto 6m ISO 9001 plastic woven package or wooden box 3-25thicknessX10-150mmwidth
Stainless steel bars-cold drawn/peeled bright surface Grade (201,202,204,205,301,302,304/l,316/l,316ln, 303,310,431,420,410,430)according to the standard: astma276-96, din gb1200-93 Size: 3mm upto280mm, ramdom length or as per request Supplied condtion: bright surface Package: plastic and woven package or wooden box Lead time: within 25days after received your down payment Payment:tt30% down payment and the balance by the fax of copy of bill of loading Iso certificate 9001 PMI test supplied
ROUND BARS :5MM TO 100MM IN ALL GRADE EXPORT BRIGHT GRADES IN STAINLESS STEEL 304 , 316 , 303 , 304L , 316L. AVAILABLE IN BLACK, SEMIEXPORT & EXPORT BARS. Applications : Machining / Pistons / Pump Shafts / Fasteners / Thread rolling domestic industrial & engineering application
Dealing In Various Grades Of Carbon Steel, Free Cutting Steel, Alloy Steel, Stainless Steel.