Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Casting - manhole covers, gully tops, tree gratings, cast irons.
Since 36 Years, we JAY KHODIYAR INDUSTRIES are recognized as a trustworthy manufacturer, Exporter and supplier of cast iron product. In order to manufacture high-quality cast iron our professionals employ advanced machines and utilize quality tested material procured from the authentic vendors. In addition, our clients can avail these cast iron from us at a reasonable price.
ZSI can provide you all kinds of iron casting products with competitive pricing. Material:Grey Iron: GG15, GG20, GG25, GG30 Ductile Iron: GGG40, GGG45, GGG50, GGG60, GGG70 Process:Resin sand casting, Film-covering sand casting, Clay sand casting, Hand molding and machine molding Application:Agricultural machinery, Off-shore industry, Printing machinery, Waste treatment machinery, Concrete plant equipment, Packaging machinery, Pumps
Gray iron & ductile sand mould casting parts. Standard export packing, suitable for long distance ocean freight.
Corrtech silicon iron anodes are made by chill casting in metal mould. The anodes have high density, compact crystal structure and low consumption rate, thus have longer life than other anode. We produce this kind of anodes according to astm a518-86(grade 3) standard. They are made by chill cast technology, and have much higher performance and better quality than normal sand mould casting. Alloy composition The alloy contains chromium which is preferable suited to situations where chlorine or other aggressive agents may be generated by electrolysis (e.G. In seawater or in deep well ground beds).
Name specification weight Ktgt-a-38 (dia 38mm x 1500mm) 13kg Ktgt-a-50 (dia 50mm x 1500mm) 20kg Rod anode ktgt-a-75 (dia 75mm x 1500mm) 50kg Ktgt-a-102 (dia 102mm x 1500mm) 85kg Tubular anode ktgt-b-1(dia 68mm x 1500mm) 20kg Ktgt-b-2(dia 120mm x 1500mm) 58kg Ktgt-b-3(dia 120mm x 1500mm) 77.5kg Ktgt-b-4(dia 100mm x 1500mm) 30kg Ktgt-b-5(dia 100mm x 1500mm) 40kg
We do manufacture vast sizes of iron powder which ranges from +2 mesh upto -325 Mesh . Our production capacity is 7200- 9600MT per annum. In all our powder, iron content is more than +95% . Mostly used by all the biggest chemical manufacturers and pharma companies, dyes & intermediate companies in INDIA. It will be great doing business with you sir . Thank you.
Malleable Iron Castings Category:Steel casting Malleable Iron Castings is a cast iron product obtained by treating ordinary white cast iron. Common grades are KTH300-06 etc. Malleable Iron Castings is very common in the production process, has a wide range of uses, and has good mechanical properties.It is mainly used in shock and vibration parts such as rear axle housing, steering mechanism, low pressure valve, pipe joint and so on. Malleable cast iron refers to a kind of cast iron obtained by graphitizing and annealing white cast iron, which has high strength, plasticity and toughness, and can replace carbon steel to a certain extent. Malleable cast iron is also called malleable iron, horse iron and ductile cast iron. Childworms are used in the manufacture of automobile parts or wear-resistant parts of power machinery. The processing performance of white iron is extremely poor, so through graphitization degradation treatment, the formed malleable cast iron has higher strength and plasticity, which has better mechanical properties than gray cast iron, and has good plasticity and toughness. It is generally divided into black-core malleable iron and pearlitic malleable iron.
High carbon graphite recarburizer is also named carbon addtive, which widly used in casting industry. It is a derivative from Calcined Petroleum Coke & Calcined Anthracite. This product can be used as a pure carbon additive. We monitor percentage of sulphur for this product as the customers of this product require minimal level of sulphur.
Cast iron griddle for all your grilling needs such as meats, steaks, hamburgers, poultry and vegetables. Can be reversed and used on smooth side to make morning breakfast such as eggs, bacon, ham, grilled cheese sandwiches.
The Cast Iron Skillet is a multi-functional cookware that works wonders with slow-cooking recipes and all your favorite foods. Fry up a mess of catfish, roast a chicken, or bake an apple crisp in this pan that features two handles for heavy lifting and two subtle side lips for pouring. Made from pre-seasoned cast iron, it is durable enough to last for generations.
Products: 1. Heavy engineering parts( drum , gear housing ect.), material: qt500, weight: 5~200kg; 2. Hydrualic parts( tube, valve , valve cover , cross/tee, cylinder, pump head and so on ), weight:2~30kg; 3.Auto parts(arm triangle, steering knuckle , suspension arm, etc.) material: qt450-10, weight: 2~30kg; 4.Compressor parts ( cylinder, air inlet block, air outlet block, flange ect.), material: ht250.