Product Name: Propylene Glycol Appearance:Colorless Liquid Purity:>99% CAS:57-55-6 EINECS:200-338-0 Solubility: It can be mixed with water and other organic solvents. Propylene Glycol is a viscous colourless liquid which is nearly odourless but possesses a faintly sweet taste.Forty-five percent of propylene glycol produced is used as chemical feedstock for the production of unsaturated polyester resins. Propylene glycol is used as a humectant, solvent, and preserva-tive in food and for products.
Products Description Glycerol is a colorless, viscous, hygroscopic, sweet-tasting trihydric alcohol. It is also called glycerin or glycerine, with the term glycerol being preferred as the pure chemical form and the term glycerin(e) being primarily used when the compound is used commercially in various grades. Application 1) In medicine, it is used to making various preparations, solvent, hygroscopic agent, antifreeze and sweeteners, preparation for external use ointment or suppository, with glycerol nitroglycerin used for explosive materials. 2) In the coatings industry, it is used for making all kinds of alkyd resin and polyester resin, epoxy resin and glycidyl ether. 3) In textile and printing industry, it is used for preparing wetting agent hygroscopic agent, fabric anti-creasing shrink proof treatment agent, dispersant and penetrating agent. 4) In the food industry , it is used as sweetener, tobacco hygroscopic agent and solvent. 5) In addition, in the paper, cosmetics, leather, photography, printing, metal processing rubber and other industries widely application.
Cedarwood Oil, extracted through steam distillation from the Juniperus virginiana tree, is a pure essential oil originating from Indonesia. It has a deep, woody, and balsamic odor with a clear appearance. This versatile oil is widely used in various industries, including fragrance and perfume, soap, cosmetics, pesticides, flavoring, and pharmaceuticals. Its primary constituents are a-Cedrene, Thujopsene, Cedrol, b-Cedrene, and a-Selinene. Cedarwood Oil is certified with COA (Certificate of Analysis) and MSDS (Material Safety Data Sheet), ensuring its quality and safety.
Sebacic acid has a wide range of uses, mainly used to prepare sebacic acid esters, such as dibutyl sebacate, dioctyl sebacate and Diisooctyl sebacate. These esters can be used as plasticizers for plastics, cold resistant rubber, polyamide, polyurethane, alkyd resin, synthetic lubricating oil, lubricating oil additives, spices, coatings, cosmetics, etc. It can also be used as raw material for the production of nylon 1010, nylon 910, nylon 810, nylon 610 and nylon 9, and as raw material for high temperature resistant lubricating oil diethylhexyl ester. It is also the raw material for the production of plasticizer, softener and solvent for alkyd resin (used as surface coating, plasticized nitrocellulose coating and urea resin varnish) and polyurethane rubber, cellulose resin, vinyl resin and synthetic rubber. Hot selling Sebacic acid Decanedioic Acid with new batch CAS 111-20-6
Cinnamon Bark Oil, known botanically as Cinnamomum Burmani, is a pure essential oil sourced from Indonesia and extracted through steam distillation. This oil possesses a warm, woody, and slightly balsamic aroma, and appears as a clear liquid ranging from yellow to brownish in color. Widely used in various industries, Cinnamon Bark Oil is a valuable ingredient in cosmetics, aromatherapy, medicine, flavoring, and home care products. Its main constituents (E)-Cinnamaldehyde, Eugenol, (E)-Cinnamyl Acetate, Linalool, B-Caryophyllene, and p-Cymene contribute to its distinct properties and effectiveness. Certified by COA and MSDS, this oil meets stringent quality and safety standards, making it suitable for diverse applications.
Physical property: Melting Temperature: -49 ºC Boiling Temperature: 240-243 ºC Density at 20ºC, g/cm3 : 1.204 Flash Point: 123 ºC Ignition Temperature: 455 ºC Packaging Details 250kg drum;1200kg/IBC; 23-24MT ISO TANK Application: 1. Reactive diluents for urethane and epoxy resins 2. Cleaner and degreasers 3. Chemical intermediates 4. Cosmetics additives 5. Electronic industry(media) as filler 6. Paint stripper 7. Foundry sand binder, wood binding resins 8. Coal mining ,excavation and tunneling 9. Removal of CO2 from Urea manufacturing, oil gas, natural gas etc 10. Setting agent in chemical grouting to get easily controlled gel time
White crystal powder without any visible foreign matters. Soluble in water, slightly soluted in alcohol, dissolvable in benzene, ether and petroleum ether etc., Esters will be formed by reaction with common organic acid; No reaction take place when it is heated with dilute caustic solution. application Pentaerythritol is used in the manufacture of Alkyd resins, fatty acid rosin and tall oil esters and to make paint and coatings, printing ink, coating adhesives, explosives, sealants, varnish, lacquer, vinyl chloride, synthetic rubber and miscellaneous including Pentaerythritol tetranitrate (PETN), urethane coatings, flame retardant paints, polyvinyl chloride stabilizers, olefins antioxidant and Pentaerythritol triacrylate.
Physical state and appearance: Colorless clear Liquid. (Oily liquid.) Practically Odorless. Taste: Practically Tasteless. Molecular Weight: 76.1g/mole Boiling Point: 188C (370.4F) Melting Point: -59C (-74.2F) Specific Gravity: 1.036 (Water = 1) Vapor Pressure:0 kPa (@ 20C) 0.08 mmHg at 20 C 0.129 mmHg at 25 C Vapor Density: 2.62 (Air = 1) Water/Oil Dist. Coeff.: The product is more soluble in water; log(oil/water) = -0.9 Dispersion Properties: See solubility in water, acetone Application: Its most important end use is in the production of unsaturated polyester resins that, in turn, go into items that effect our daily lives, like water tanks, or our leisure time, like sailing boats. It can also be used as plasticizer, surface active agent, emulsifying agent and demulsifying agent, mould inhibitor, antiseptic for fruit, ice inhibitor and moisture preserving agent.
We Setco Trading FZE is specialized Oil/Bituminous products supplier in UAE. Our range of products include like Metals (ferrous & non-Ferrous), Minerals (Chrome Ore, Mn Ore, Ferro Alloys etc) Petrochemical like PVC Resin, LLDPE, LDPE , Polypropylene, HDPE etc/ Base Oil Group I and II / White Spirit , Base oil, Furnace oil, Fuel Oil (Cst 180, Cst 380), Diesel(Gas Oil), Paraffin Wax, Slack Wax, Grease, Rubber Process Oil & other related products. Our products are approved by Directorate of Design and successfully used in diverse areas. Since our inception in the year 2007, we are serving both domestic as well as overseas markets with our focus on product and service quality. And, we have made it possible by virtue of our commitment towards state-of-the-art technology, unmatched product quality and intensive research & development initiatives. we are committed to render our clients high quality oil products that comply the international quality standards. which have paved our way for the phenomenal growth in oil products in UAE but also in the global markets. Our understanding of requirements in diverse industries helps us to deliver best, we manufacture and supply a comprehensive range of oil products. We are very much interested to supply Sulfur Granular & Lumps mentioned above to your esteem company .
Supply- Granular & Prilled Urea We Setco Trading FZE is specialized Oil/Bituminous products supplier in UAE. Our range of products include like Metals (ferrous & non-Ferrous), Minerals (Chrome Ore, Mn Ore, Ferro Alloys etc) Petrochemical like PVC Resin, LLDPE, LDPE , Polypropylene, HDPE etc/ Base Oil Group I and II / White Spirit , Base oil, Furnace oil, Fuel Oil (Cst 180, Cst 380), Diesel(Gas Oil), Paraffin Wax, Slack Wax, Grease, Rubber Process Oil & other related products. Our products are approved by Directorate of Design and successfully used in diverse areas. Since our inception in the year 2007, we are serving both domestic as well as overseas markets with our focus on product and service quality. And, we have made it possible by virtue of our commitment towards state-of-the-art technology, unmatched product quality and intensive research & development initiatives. we are committed to render our clients high quality oil products that comply the international quality standards. which have paved our way for the phenomenal growth in oil products in UAE but also in the global markets. Our understanding of requirements in diverse industries helps us to deliver best, we manufacture and supply a comprehensive range of oil products. We have availability for Granular and Prilled Urea of Middle East Origin as follows: PRILLED AND GRUNALAR UREA Please advise your interest.
Physical state and appearance: Colorless clear Liquid. (Oily liquid.) Practically Odorless. Taste: Practically Tasteless. Molecular Weight: 76.1g/mole Boiling Point: 188°C (370.4°F) Melting Point: -59°C (-74.2°F) Specific Gravity: 1.036 (Water = 1) Vapor Pressure:0 kPa (@ 20°C) 0.08 mmHg at 20 C 0.129 mmHg at 25 C Vapor Density: 2.62 (Air = 1) Water/Oil Dist. Coeff.: The product is more soluble in water; log(oil/water) = -0.9 Dispersion Properties: See solubility in water, acetone Application: Its most important end use is in the production of unsaturated polyester resins that, in turn, go into items that effect our daily lives, like water tanks, or our leisure time, like sailing boats. It can also be used as plasticizer, surface active agent, emulsifying agent and demulsifying agent, mould inhibitor, antiseptic for fruit, ice inhibitor and moisture preserving agent for tobacco. Packaging Details Mono Propylene Glycol MPG CAS: 57-55-6 Iron drums, 215kg/drum, 17.2 MT/20GP Flexitank: 22-23MT/ flexitank cost little
Crude Sunflower Oil Specifications Crude Sunflower Oil Specifications Typical Values Specific Gravity ( At 20 C ), G/cm 0,918 0,923 Refractive Index ( At 40 C ) 1,461 1,468 Smoke Point, C Min �±10c Flash Point, C Min �±10c Colour Red ( On Lovibond Cell ) Consistency Liquid Viscous +20c Odour, Taste Specific For This Product Quality And Food Safety Parameter Max Perokside Value, Meq.o2/kg 15 Moisture And Volatile Substances, % 0,2 Acid Value, Mg Koh/g 4,0 Jodine Value, Gj2/100g 118 - 141 Insoluble Impurities, % 0,05 Soap Content, % 0,005 Soaponification Value, Mg Koh/kg 188 - 194 Unsoaponification Matters, % < 15 Typical Fatty Acid Composotion % C 14:0 < 0,2 C 16:0 5,0 7,6 C 18:0 2,7 6,5 C 18:1 14,0 39,4 C 18:2 48,3 74,0 C 18:3 < 0,3 C 20:0 0,1 0,5 C 20:1 < 0,3 C 22:0 0,3 1,5
Our frankincense oil is 100% pure, extracted through steam distillation from the resin of the Boswellia serrata tree. This ensures a high concentration of therapeutic compounds, making it ideal for a variety of applications in health, wellness, and cosmetics. Certifications & Quality Control 1. 100% Pure & Natural: No additives or synthetic ingredients. 2. Certified Organic (where applicable): Processed under strict standards to maintain its purity. 3. Batch Testing: Each batch is rigorously tested for purity, potency, and safety to ensure it meets industry standards. Product Availability & Packaging Options 1.Bulk Supply Available: We offer various sizes (from 1 kg to larger bulk orders) to meet your production needs. 2. Flexible Packaging: Available in glass or aluminum containers, as well as private labeling options, helping you brand the oil to your target market. We ensure competitive pricing without compromising on quality, and with our reliable supply chain, you can expect timely deliveries and consistent product availability year-round.
Leading Castor Oil Manufacturers, Suppliers & Exporters From India Castor oil is generally a non-edible vegetable oil obtained by pressing the seeds of the castor oil plant (ricinus communis). it is a triglyceride in which approximately 90 percent of fatty acid chains are ricinoleate. oleate and linoleates are the other significant components. castor oil and its derivatives are used in the industrial and technical use in paints, printing inks, soaps, lubricants, hydraulic and brake fluids, paints, dyes, coatings, cold resistant plastics, waxes, polishes, nylon, pharmaceuticals, perfumes, synthetic (alkyd) resins, varnishes, adhesives, plasticisers, sealants, leather, foundries, wood & timber preservation / treatment, glass putty, etc. also, the biodiesel or methyl esters find use as fuel, solvent, lubricant, adjuvant, cleaner, metal pre-treatment (degreasing). methyl ester sulfonates can be prepared from these for use in detergents. castor oil is famous as a source of ricinoleic acid, a monounsaturated, 18-carbon fatty acid. among fatty acids, ricinoleic acid is unusual in that it has a hydroxyl functional group on the 12th carbon. in the food industry, castor oil (food grade) is used in food additives, flavorings, candy (e.g., polyglycerol polyricinoleate or pgpr in chocolate), as a mold inhibitor, and in packaging. polyoxyethylated castor oil is also used in the food industries. castor oil is a vegetable oil pressed from castor beans. Castor oil is a colorless to very pale yellow liquid with a distinct taste and odor. we aspire to develop ourselves as lead player in castor oil derivative market by offering our customers best quality products at competitive prices. we aim to achieve this by adopting ethical, moral, innovative and eco-friendly practices that would lead us to professional heights coupled with personal uplift of our employees. castor oil in kutch â?? gujarat, castor oil in india, best castor oil brand, etc. find castor oil manufacturers in india, castor oil suppliers in india, castor oil exporters in india, castor oil importers in india, gujarat, rajkot, mundra port, junagadh, nhava sheva port, ahmedabad, kandla, mumbai, delhi in india and around the world. Real Extreme Export private limited regularly exports to malaysia, indonesia, philippines, thailand, vietnam, saudi arabia, united arab emirates, morocco, kuwait, qatar, uae, usa, singapore, turkey, russia, algeria, jordan, georgia, armenia, yemen, oman, south korea, egypt, china, bahrain, tunisia, afghanistan, south africa, united kingdom. Castor Oil Specifications: PROPERTIES VALUES & LIMITS Product Name: Castor Oil Appearance: Yellowish, Viscous, Liquid M. I. V. 0.50 % Max. F.F.A. (as oleic): 2.00 % Max Place of Origin: India Saponification Value: 177 â?? 185 Iodine value: 158 â?? 163 Unsaponifiable matter %: 0.70 % Max Packaging Details: TYPES OF BAGS QUANTITY Packaging size Flexi Bags â?? As Per Customer Requirement Container Capacity: TYPE OF CONTAINER
Bitumen a black viscous mixture of hydrocarbons obtained naturally or as a residue from petroleum distillation. It is used for road surfacing and roofing. Bitumen is a mixture of Organic Liquids that are highly Viscous, Black, Sticky, Entirely Soluble in Carbon Disulfide, and composed primarily of highly condensed Polycyclic Aromatic Hydrocarbons. Naturally occurring or crude bitumen is a sticky, tar-like form of petroleum which is so thick and heavy that it must be heated or diluted before it will flow. At room temperature, it is much like cold molasses. Refined Bitumen is the residual (bottom) fraction obtained by fractional distillation of crude oil. It is the heaviest fraction and the one with the highest boiling point, boiling at 525 C (977 F). Petroalliance are involved in import and the supply and trade of Bitumen Oil. This oil is a dark and viscous liquid which is sticky in texture. It is widely used in road construction, waterproofing, paints, enamels etc. It is available to clients in different types of settings at highly affordable prices. It is widely acclaimed amongst our client base for its supreme quality. Uses of Bitumens Bitumen is primarily used for construction and paving of roads. Its other uses are for Bituminous Waterproofing Products, including the use of bitumen in the production of roofing felt and for sealing flat roofs.
CAS Number: 67701-08-0 It is obtained by splitting and the subsequent vacuum distillation of rapeseed oil. The product obtained has a melting point above 15 C. When in liquid form, it is bright yellow and with a characteristic odour. Rich in oleic acid. Fatty acids are used, inter alia, in the following sectors: Amines, betaines, esters, fatty alcohols, lubricants, surface finishes, detergents, cosmetics and personal care, and solid liquid soaps, textile finishing, leather finishing, finishing fibers, coatings, resins and surfactants.
CAS Number: 67701-08-0 It is obtained by splitting and the subsequent vacuum distillation of rapeseed oil. The product obtained has a melting point above 15 C. When in liquid form, it is bright yellow and with a characteristic odour. Rich in oleic acid. Fatty acids are used, inter alia, in the following sectors: Amines, betaines, esters, fatty alcohols, lubricants, surface finishes, detergents, cosmetics and personal care, and solid liquid soaps, textile finishing, leather finishing, finishing fibers, coatings, resins and surfactants.
CAS Number: 84625-38-7 Is obtained by splitting and the subsequent vacuum distillation of sunflower oil. The product obtained has a melting point above 20 C. When in liquid it is pale yellow. Sunflower Fatty acids are used among others applications: Amines, betaines, esters, fatty alcohols, lubricants, surface finishes, cosmetics and personal care, and solid liquid soaps, textile finishing, leather finishing, finishing fibers, coatings, resins, detergents and surfactants.
CAS Number: 68424-45-3 It is obtained by splitting and the subsequent vacuum distillation of linseed oil. The product obtained has a melting point above 19 C. When in its liquid state it is pale yellow. Linolenic acid-richLinseed. Fatty acids are used among others aplications: Amines, betaines, esters, fatty alcohols, lubricants, surface finishes, technical detergents, liquid soaps and solids, textile finishing, leather finishing, finishing fibers, coatings, resins, surfactants.
CAS Number: 68308-53-2 Obtained by splitting and the subsequent vacuum distillation of soybean oil. The product obtained has a melting point above 25 C. Solid yellow or clear fluid at room temperature. Rich in linoleic acid and less in oleic acid. Soya Fatty acids are used among others application's: Amines, betaines, esters, fatty alcohols, lubricants, surface finishes, detergents, cosmetics and personal care, and solid liquid soaps, textile finishing, leather finishing, finishing fibers, coatings, resins, and surfactants.