Infrared Lamp Wholesale Infrared Heater Lamp For Blow Molding Machine SK15 Shortwave Infrared Emitter IR Lamp Heater for Blowing Machine Fast heating IR Infrared Heat Lamp for high speed PET Blowing Machine electric Clear heating tube PET Blowing Machine heater lamps 220v infrared halogen heating lamp Manufacturer Wholesale Red Infrared Lamp PET Blowing Molding Machine IR Heater drying Halogen Emitter equipments PET Blowing Machine heating IR heater infrared halogen heat lamp 380V 1300W 470/120mm SK15 3000W electric pet blowing machine Infrared Heater Lamp element drying equipments
Column forms are a type of concrete formwork. Concrete forms are molds made of steel, aluminum, wood, plastic, or other materials in which wet concrete is poured to achieve the desired shape and size for construction. Once the concrete has set, the forms are usually removed, although permanent forms still exist as part of the construction. The shape and size of the column formwork depends on the needs of the project. To aid in quality control during the pouring phase using a column formwork, a horizontal jig made of steel or wood is often used in conjunction with a column mold. The head of the column formwork is often used to support the beam formwork or to cast the column formwork into the bottom side of the beam. The use of column formwork in combination with beam formwork allows for fast and precise construction.
Model: HL-906 Size: L300 x W220 x H190mm Weight: 11kg Efficiency :40000-60000pcs / H Features: â?? Application: Tape resistors, diodes and other components forming the axial cut feet. â?? molding, cut the foot once completed, the processing ability. â?? molding span, foot length can be adjusted. â?? tool steel imported from Japan, long life. â?? can be installed, the folder on the desktop use; economy high. â?? Can U-shape (horizontal), F type (Vertical) (two forms can not be shared, required to indicate when ordering what kind of shape forming.) Another U-specific specifications for a US-based, specialized components for forming a smaller
Natural gas high-pressure ball valves are often used to cut off or connect media in oil, natural gas, coal and ore mining, refining and processing, and pipeline transportation systems. Special ball valve and ash unloading valve for pulverized coal injection are especially suitable for blast furnace pulverized coal injection, dust and solid powder pipeline systems, air pipelines and spray gun pipelines. The natural gas high-pressure ball valve is a relatively new type of ball valve. It has some advantages unique to its own structure, such as frictionless switch, non-wearing seal, and small opening and closing torque. This can reduce the size of the actuator. Equipped with a multi-turn electric actuator, it can realize the adjustment and close shut-off of the medium. It is widely used in petroleum, chemical, urban water supply and drainage and other working conditions that require strict cut-off. The manual ball valve is mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. The ball valve is a new type of valve that has been widely used in recent years.
Model V222TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 1000(736)/2,300 Displacement( cc ) 21,927 Cylinder number - bore x stroke( mm ) 12 - 128x 142 Compression ratio 15 : 1 Firing order 1 â?? 12 â?? 5 â?? 8 â?? 3 â?? 10 â?? 6 â?? 7 â?? 2 â?? 11 â?? 4 â?? 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 191 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 98 / 87 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,973 x 1,233 x 1,606 Engine dry weight (KG) 1,830
Model V180TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 820(603)/2,300 Displacement( cc ) 18,273 Cylinder number - bore x stroke( mm ) 10 - 128x 142 Flywheel housing & y wheel (inch) SAE 1 & 14 Compression ratio 15.5 : 1 Firing order 1 - 6 - 5 - 10 - 2 - 7 - 3 - 8 - 4 - 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 187 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 92 / 81 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Rubber impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,495 x 1,222 x 1,169 Engine dry weight (KG) 1,630
Model V222TIH Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 720(530)/1,800 Displacement( cc ) 21,927 Cylinder number - bore x stroke( mm ) 12 - 128x 142 Compression ratio 15 : 1 Firing order 1 â?? 12 â?? 5 â?? 8 â?? 3 â?? 10 â?? 6 â?? 7 â?? 2 â?? 11 â?? 4 â?? 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 129 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 98 / 87 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,973 x 1,233 x 1,606 Engine dry weight (KG) 1,750
Model V180TIM Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 650(478)/2,100 Displacement( cc ) 18,273 Cylinder number - bore x stroke( mm ) 10 - 128x 142 Flywheel housing & y wheel (inch) SAE 1 & 14 Compression ratio 15.5 : 1 Firing order 1 - 6 - 5 - 10 - 2 - 7 - 3 - 8 - 4 - 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 141 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 92 / 81 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Rubber impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,495 x 1,222 x 1,169 Engine dry weight (KG) 1,550
Model V158TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 680(500)/2,300 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 10.89 Compression ratio 14.6 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 130 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,435
Model V158TIM Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 540(397)/2,100 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 9.94 Compression ratio 15 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 100 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,350
Model V158TIH Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 480(353)/1,800 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 8.52 Compression ratio 15 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 85 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,350
100,000 metric tons of EN590 10 PPM material at the Port of Rotterdam price is $735 per ton. The transaction will be subject to the following procedures: Procedures (tank to tank) FOB Rotterdam standard procedures: 1. Buyer issues ICPO, (TSA), financial capacity, 2. Bank details, scanned copy of buyer's passport along with CP and Reg. certificate. 3. The seller issues a commercial invoice signed by the seller and buyer. 4. The Seller issues to the Buyer a Dipping Test Authorization (DTA) document which must be signed by the Buyer, the Seller and the Buyer's logistics company as verification. 5. Seller issues the PPOP listed below to Buyer: â?? TSR with GPS coordinates of tank location. â?? Injection report. â?? Certificate of origin. â?? Permit to sell. â?? SGS report. â?? Product passport (laboratory analysis report). 6. Buyer conducts dip test and sends TSR to seller. 7. After successful dipping test in sellers' tanks, the product will be immediately injected into buyer's tanks. Buyer pays for the product via MT103/TT.
(1) Diesel engine for generator use (2)Diesel engine for water pump use 2 Diesel engine spare parts (1)Diesel engine for generator use 代表å?¾ç??ï¼?495D Type Cyliner/Bore/Stroke Intake Method Combustion Type Rated Output/ Speed Min. Fuel Consumtion Net Weight (mm) (Kw/r/min) (g/kw.h) (kg) 495D 4/95/115 Natural Aspirated Turbo Method 26.5/1500 246 380 495D2 4/95/115 Natural Aspirated Turbo Method 30/1800 246 380 K4100D 4/100/115 Natural Aspirated Turbo Method 30.1/1500 246 380 K4100D2 4/100/115 Natural Aspirated Turbo Method 34/1500 246 380 K4100ZD 4/100/115 Turbocharged Turbo Method 42/1500 235 390 K4100ZD2 4/100/115 Turbocharged Turbo Method 45/1800 235 390 N4102D 4/102/120 Natural Aspirated Direct Inject 36/1500 235 380 N4102ZD 4/102/120 Turbocharged Direct Inject 48/1500 230 390
No. Category Description 01) WIRES AND WIRE HARNESS HDV-MICRO WAVE OVEN PARTS 02) WIRES AND WIRE HARNESS OEM 03) WIRES AND WIRE HARNESS MICROWAVE OVEN PARTS 04) WIRES AND WIRE HARNESS BRAKET 05) WIRES AND WIRE HARNESS MOTOR 06) WIRES AND WIRE HARNESS ASSY WIRE HARENESS-MICRO WAVE OVEN PARTS 07) WIRES AND WIRE HARNESS ASSY PLASTIC INJECTION 08) WIRES AND WIRE HARNESS ASSY HOLDER-MICRO WAVE OVEN PARTS 09) WIRES AND WIRE HARNESS WIRE HARNESS 10) ASSY INJECTION MOULDING PARTS PARTS 11) PLASTIC COMPONENTS BATTERY PACK 12) PLASTIC COMPONENTS WIRES AND WIRE HARNESS 13) PRINTED CIRCUIT BOARDS (PCB), PCBA, BOARD & SYSTEM WIRES AND WIRE HARNESS 14) CABLES AND CABLES ACCESSORIES WIRES AND WIRE HARNESS 15) CABLES AND CABLES ACCESSORIES CHARGER CABLE 16) CABLES AND CABLES ACCESSORIES USB CABLE 17) HUB, REPEATER, ROUTER AND TRANSCEIVER MIFI (TELECOMUNICATIOB UNIT) 18) MAINFRAME / MIDRANGE / SERVERS TV ASSY PARTS 19) POWER TOOL BATTERY POWER TOOL BATTERY 20) NOTEPC BATTERY PACK NOTEPC BATTERY PACK 21) INTERFACE BOARD INTERFACE BOARD 23) BATTERY PACK BATTERY PACK
Add a pop of color to your home or office and choose our modern office chair. This office chair with simple design and smooth lines, with its unique black and white color scheme, injects a fresh style into your space. The high back design not only provides extra support but also ensures comfort during use. The seat cushion is made of soft black material that contrasts with the smooth white base, making it both beautiful and functional. The swivel mechanism and foot pedal design at the bottom allow you to easily adjust to the most comfortable position. The stable round base ensures the stability of the chair, giving you solid support whether you are working or resting.
D6, En590, JP54 .Jet A1 AVIATION KEROSENE JET A-1 FOB: +$2-$6 1st Trial Shipment: 2,000,000 BBLS 4,000,000 BBLS Monthly Shipment: 4,000,000 BBLS Destination Port: ASWP/Rotterdam/ Houston Commission Structure: Seller side CLOSED $1/2$- Buyer side OPENED $1/2$ GAS OIL EN 590 10 PPM FOB Price: +5/-10 1st Trial Shipment: 100,000 MT 200,000 MT Monthly Shipment: 200, 000 MT Destination Port: ASWP/Rotterdam/ Houston Commission Structure: Seller side CLOSED $5/$10 Buyer TERMS AND CONDITIONS FOB TANK TO TANK 1) Buyer issue ICPO containing the seller's working procedure and banking details along with buyers nominated TSA, company registration certificate 2) Seller issues commercial invoice of the product in tanks at the port, buyer sign and return commercial invoice along with an acceptance letter. 3). Seller issue appointment letter for seller representative to present a fresh SGS Report of less than 24 hours to Buyers and buyers logistics for proper verification at the buyers Tank Terminal upon successful SGS verification seller inspect buyers Tank for injections 4) Upon confirmation of successful verification of SGS Report by Buyer company and buyers Tank Farm Company, Buyer should be issues 2 day TSR on supplier name of seller 5.Seller issue: a) IPA signed by buyers and buyers Tank Farm b) Authorization to sell and collect c) commitment to supply d) Statement of availabilities of product 6)Upon confirmation of the signed INJECTION PERMISSION AGREEMENT seller Issue to buyers a) Fresh SGS report of less than 24 hours on buyers company name b) Q&Q Report. And Injection Report. c) Authorization to verify physically the product in sellers tank (ATV) d) Tank Storage receipt TSR 7) Buyer conducts Dip test on the product in seller Tank and makes the payment for the total value of product via MT103-TT to enable the injection process into their Nominated tanks 8). Seller pays all intermediaries involved in the transaction and subsequently monthly shipments continue as per terms and conditions of the sales and purchase agreement contract between buyer and seller Send me a message in Chats and I will be able to answer you quickly
WHAT 'S THE FACE SKIN CARE MACHINE This is a 3 in 1RF+LoxyGeneo+Ultrasound skin beauty device, the use of activate the body's natural mechanism - Boer effect, so that the skin can release the oxygen in high environment. lmporove skin oxygen content.stimulating cell metabolism, accelerate the skins repair function. lmprove skin texture from the inside to outside. Advantage Natural L oxygen supply in the skin Immediate and long-term effects Injection of the maximum active ingredient Flexibly customize the course of treatment Deep cleansing of the skin Safe and effective treatment Comfort and simple treatment Cutting-edge technology
Honda Marine 150AK2XC Four cylinder, VTEC, 25 extra long shaft, BLASTTM, NMEA 2000 compliance, electric start, remote steering, EFI, power tilt & trim. With technology from the Accord and CR-V, the BF150 brings big performance and reliability. The legendary Variable Valve Timing & Lift Electronic Control (VTEC®) provides smooth acceleration and power, Dual Stage Induction gives you loads of torque and superb fuel economy, and the Multi-Port Programmed Fuel Injection PGM-FI gives you solid starts and throttle. (The BF150 does not come with a propeller. Please consult with your Honda Dealer for propeller application assistance.)
This yellow iron chair injects a splash of color into your living space with its simple yet stylish design. Its durability ensures a long service life, while the unique square seat design not only provides a comfortable sitting experience, but also adds character to the overall shape. Four sturdy legs ensure the stability of the chair, making it an ideal choice whether in an office, restaurant or home environment. Choose this iron chair to make your daily life more comfortable and convenient.Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
This yellow iron chair injects a splash of color into your living space with its simple yet stylish design. Its durability ensures a long service life, while the unique square seat design not only provides a comfortable sitting experience, but also adds character to the overall shape. Four sturdy legs ensure the stability of the chair, making it an ideal choice whether in an office, restaurant or home environment. Choose this iron chair to make your daily life more comfortable and convenient.Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
