1. As the 7th generation of Bluelight serial products, BL£F type ( also known as Bluelight diabetes treatment instrument, Bluelight health instrument )contains all the excellences of the former ones, it occupies the largest exports in China and widely holds true to hospitals¡¢clinics and families. 2. With far infrared heat treatment, BL-F health devie can reach the function of dredging the channels¡¢balancing the metabolism and the calming and analgesia. 3. With bi-helix magnetic therapy under field effect, BL-F health devie takes effect by using the body-like spectrum electrotherapeutics and the helix magnetic field in link with the physiological electric current of human body. 4. With ion-inducted reflexotherapy through hands and feet, the apparatus continually outputs electric current in frequency conversion to the organs¡¯ nerve reflection area lying on the body periphery and feet, and blends with the physiological conditions of human body. 5. With multifunctional microcomputer numeral display, 8 outputs auto-alternate and the treatment process is well memorized. The timing can be set freely from 1 to 9 minutes, and the electric current intensity and heat treatment temperature are numeral displayed in 8-section division and of free regulation. Collecting three sets of electrode poles¡¢four outputs and sound alarming system together, the four treatments can be independently used or shared by three at the same time. 210*146*82mm, packed in carton
Technical details: A) refractive index: 2.20+/-0.02 B) round ratio: less 10% C) opacity: less 5% D) specific gravity: 4.5+/-0.01 E) size: no. Mesh 1 160-200 2 200-250 3 250-300 4 300-350 5 350-400 6 400-450 Packing: 25kgs/iron drum Min order quantity: 200kgs Packing: 25kgs/iron drum
Slar power pack for petrol pump A
1) inner tank: imported food grade stainless steel sus304-0.5mm 2) vacuum tube: 47/1500;58-1800 3) outer tank: painted steel-0.4mm/aluminum-zinc coated steel-0.45mm/stainless steel sus304 4) insulation: polyurethane 50mm/60mm 5) frame: coated galvanized steel-1.5mm/stainless steel sus430-1.5mm 6) reflector: aluminum component/stainless steel/none 7) if not stainless steel model, outer tank/frame/side cover color: option (blue/red/golden etc..) Manifold in one carton, frame in one carton, vacuum tubes in several cartons
Solar panels. A4 copier paper from 70, 75, 80 gsm. Textiles, agri products, etc. Kg
Made in Canada. Jacuzzi brand pump, filters & accessories. Standard packing
1.High quality 2.Competitive price 3.Prompt delivery Weight: 0.061kg/set
1.Easy installation 2.Pre-assembly 3.Clean anodized 4.Lower price 5.Factory Weight:0.052kg/set
Mppt technology High conversion efficiency Wide input voltage range Low frequency transformer isolation Easy operation and installation. Dimension:442*380*110mm Weight: 16.5kg
Input voltage: 12vdc/24vdc/48vdc Output voltage: 110vac/220vac Output frequency: 50/60hz Efficiency: >90% Continuou power: 2000w Max start powr: 2400w Surge power: 4000. Dimensions (mm): 320x220x88 Weight (kgs): 3
The HGN4-002GL DC Isolators have been specifically designed to switch Direct Current (DC) at voltages up to 1000Volts. Their robust design and ability to switch such voltages, at rated current, mean that they are ideally suited to be used in the switching of Photovoltaic (PV) systems. Key Features P65 rated enclosure TUV Approval Ample internal space for easier wiring. Polycarbonate flame retardant plastic ,UV protect 16A,25A & 32A all rated up to 1000V DC. Unique spring loaded switching mechanism for high speed switching(5mS max). Knife edge self-cleaning contacts for increased switch life. Long arc chambers to help rapid arc suppression 16mm2 rising clamp terminals for easy wiring 1pc/inner box, 20pcs/carton
The hgn4-003gl dc isolators have been specifically designed to switch direct current (dc) at voltages up to 1000volts. Their robust design and ability to switch such voltages, at rated current, means that they are ideally suited to be used in the switching of photovoltaic (pv) systems. The product adopts the latest opposed wiring mode, which is different from the cross dislocated wiring of the previous similar products(hgn4-002gl). Therefore, it is more convenient for the electricians to assure the correct wiring, and to avoid to make error for the wiring of the input and output. Key features ample internal space for easier wiring. 16a, 25a & 32a all rated up to 1000v dc. unique spring loaded switching mechanism for high speed switching(5ms max). knife edge self-cleaning contacts for increased switch life. long arc chambers to help rapid arc suppression 16mm2 rising clamp terminals for easy wiring. 1pc/inner box, 60pcs/ carton
The hgn4-002gl dc isolators have been specifically designed to switch direct current (dc) at voltages up to 1000volts. Their robust design and ability to switch such voltages, at rated current, mean that they are ideally suited to be used in the switching of photovoltaic (pv) systems. Key features p65 rated enclosure tuv approval ample internal space for easier wiring. polycarbonate flame retardant plastic , uv protect 16a, 25a & 32a all rated up to 1000v dc. unique spring loaded switching mechanism for high speed switching(5ms max). knife edge self-cleaning contacts for increased switch life. long arc chambers to help rapid arc suppression 16mm2 rising clamp terminals for easy wiring. 1pc/inner box, 20pcs/carton
Install sit open ground Tilt angle 10~60deg System height
-- Item No. KS-M305225G -- Maximum Power (Pm) :10W -- Operating Voltage (Vmp):18V -- Operating Current (Imp) :555mA -- Power Tolerance:-5% to +5% -- Solar Cell: Monocrystalline silicon solar cell -- Dimension:305X225X4.5mm -- Encapsulation Methods: PV Tempered glass, black film, No frame -- STANDARD TEST CONDITIONS(STC): AM1.5, Irradiance:1000W/square meters, Module temperature:25 degrees centigrade. -- Warranty: nominal power keep more than 90% in 10 years. -- Charger for 12V battery. Standard.
The tubes are made from low emissivity borosilicate glass (glass with a very low iron content that has superior durability and heat resistance ) with an all-glass seal and they employ AL/N on AL selective coating, which enables the use of the whole solar energy spectrum to generate heat; this produces greater thermal efficiency in bright sunshine but also produces high efficiency in overcast or diffuse sunlight conditions. Further, the tubes are evacuated and have a barium getter (vacuum indicator) which changes color from silver to white if a tubes vacuum has been compromised. An examination of the tubes shows that the outside is actually 2 layers of glass and a vacuum has been created between them. A good way to demonstrate this would be to fill an empty tube with very hot water and notice that it does not even get warm as you hold the tube in your hands. That is because of the thermos effect¡± created by having a vacuum between the layers of glass. Carton with foam inside.
Low-pressure sodium lamp (LPS), an electricity source of using the low-pressure sodium vapor (work vapor pressure no more than a few pa), to discharge and generate the visible light. Since the invention in 1930. The Low Pressure Sodium lamp has consistently maintained its enviable position as the most efficient light source available. Germany lighting experts OSRAM is an important member of the Siemens Group, which is one of the two largest manufacturers of the electric light. LPS are famous for the most efficient light sources. For example, the 36W LPS system designed and collocated by our company, used in 8m-height road lamp system, the exposure on the ground is 24.5 Lux, however, the 85W energy-saving light at the same height, only has 4.4 Lux. The life span of low-pressure sodium lamp depends on the number of ignition process, typically 18,000 hours. Light decline is smaller than other sources, can be reached 80-85% Luminous fiux at the end of the life. At present, our company has developed the LSP system with the characteristics of high light efficient, low temperature increase, lightweight, small self-consumption and large power factor and other characteristics. Compared with the common light source, it can save the electricity above 70%. It is especially suitable for the solar road light, tunnel lighting and highland cold special environmental situation etc. Solar energy low-pressure sodium lamp system is the best choice of solar lighting field. 12 pieces/carton.
Material: AL6005-T5 & stainless steel 304&a2-70 bolt; Pre-assembly with tilt-in module; Various types to meet the difference roof and weather condition. 40pcs/ctn.
Pressurized tank Solar keymark --en12976 certificate With high pressure resistant design, the water tank adopts the water tank adopts sus304-2b or sus316l stainless steel, and special welding technology. Its thickness is 1.2mm - 2.0mm. And directly connected to pressurized water supply is permitted. The pressure resistance capability is 6 bar, if the data exceeds, the exclusively-used p/t valve will bereleased. The p/t valve, with the brand name caleffi, is qualified to en1115. Qualified to tuv safety standardization, the water tank has dual insulation functions. The temperature controller adopts american "therm o-drsc" one, qualifying to vde standardization. The super long and big magnesium stick can protect the tank free of scale. The long enough exchange copper tube(14) assures very high exchange efficiency in solar system. The outlet of copper adopts special copper, good in sealing performomce and easy to install. Product model200l300l400l We have solar keymark --en12976 certificate Whole packaging
Product Description Solar Enertech is a great solar company. Certificated by CE, IEC61215, IEC61730, VDE. Appling UL. SE series silicon solar modules with high quality are produced by Solar EnerTech Co., Ltd. It has a wide application area, such as grid-connected power system, stand alone power system, civic construction, solar water pump, communication, traffic, military, industry and agriculture etc. Feature: 1. High quality guarantee using 125/156 mm high conversion efficiency crystalline silicon solar cells 2. High performance bypass diodes minimize the power drop caused by shade 3. High transmittance, low iron tempered glass; High performance EVA; A weatherproof back sheet and sandblast electrophoresis aluminium frame extend the application of modules greatly 4. 25-year limited warranty on power output and performance (see quality guarantee) 5. Sealed, waterproof, multi-functional junction box gives high level of safety 1580*808*46mm, 16kg/pcs.
