OUTER DIMENSIONS W400mm D400mm H700mm WEIGHT 85kg POWER SUPPLY AC110V or AC220V(Single phase)50Hz/60Hz POWER CONSUMPTION 2.2KW Crimping press 6T Stroke distance 30mm � Wire TYPE AVSS,VSF, IV, KV, UL,Teflon , Glass Wire, etc Terminal type Terminal in roll or terminal in loose � Crimping applicator Side feeding or back feeding Applicator replacement Short time of change-over Crimper MATERIAL HSS Drive mode electrical Operating way By pedal HS code 8479899990
Product Details: Available Core Cross-Section Range: 0.1 - 2.5 mm2 Conduit Diameter: 6mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~35mm, End 0~50mm Twisting Way: Both sides or one side Twisting Length: 1 ~ 99mm Max. Middle Stripping Section: 3 Cutting Tolerance: ±(0.002 L) (L=Cutting Length) Speed: 4000~10000pcs/hour Display Way: English LCD dispaly Drive Mode: 4 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz Power Rating: 220W
Feature: Available Core Cross-Section Range: 0.1 - 6.0mm2 Max. Conduit Diameter: 10.0mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~30mm, End 0~15mm Max. Middle Stripping Section: 13 Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3 Cutting Tolerance: �±(0.002�?L) (L=Cutting Length) Speed: 3000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: 4 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz 110V/60Hz Power Rating: 220W
Product Details: Available Core Cross-Section Range: 0.1 2.5mm2 Conduit Diameter: �¦10mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~50mm, End 0~35mm Max. Middle Stripping Section: 11 Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3 Cutting Tolerance: �±(0.002�?L) (L=Cutting Length) Speed: 3000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: 4 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz 110V/60Hz Power Rating: 220W
Product Details: Available Core Cross-Section Range:30 - 150mm2 Conduit Diameter: 10mm-35mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~300mm, End 0~250mm Cutting Tolerance: ±(0.001 L) (L=Cutting Length) Speed: 400~700pcs/hour Display Way: English LCD dispaly Drive Mode: 32 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz Power Rating: 2000W Machine weight: 200kg Size: 1120x600x950mm
Product Details: Available Core Cross-Section Range: 0.1 - 10mm2 Conduit Diameter: �¦13mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~50mm, End 0~50mm Max. Middle Stripping Section: 11 Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3 Cutting Tolerance: �±(0.002�?L) (L=Cutting Length) Speed: 3000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: 4 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz 110V/60Hz Power Rating: 500W
When it comes to choosing the right PTFE-lined sampling valve for your industry, there are many factors to consider. From the valve size to the flange type and manufacturer, each decision can have a significant impact on the performance and longevity of your equipment. PTFE-lined sampling valves are essential components in many industrial processes, and selecting the right one is critical to ensure accurate and safe sampling. We are a manufacturer, supplier, and exporter of Sampling valves with PTFE Tubes or Teflon Lined Tubes. We also offer casting materials like Ductile Iron, Carbon Steel, and Stainless Steel.
We are one of the leading manufacturers, suppliers, and exporters of high-quality PTFE Lined Valves in India, PFA Lined Valves, and FEP Lined Valves like Lined Ball Valves, Lined Plug Valves, Lined Butterfly Valves, Lined Diaphragm Valves, with assured smooth running besides safety & reliability. Testing: Hydraulic Test, Pneumatic Test, and Spark Test. Our Teflon lined butterfly valves are resistant to corrosion have a longer service life than other types of valves. They are widely used in a variety of applications, including food and beverage processing, pharmaceutical manufacturing, chemical processing, and more.
DTech Products offers PTFE / PFA / PVDF / FEP lined double window sight glass/sight flow indicator. All products are fully lined with either PTFE, FEP, PFA depending on application. MS / SS 304 / SS 316 is also available. Both the glasses are bolted with the body. Fluids can be viewed from either top or bottom side. Our sight glass has Pressure resistance, Sturdy built, corrosion resistance, Durable. We do manufacturing, exporting and Supplying PFA / PVDF / FEP Lined Double Window Type Sight Glass in various grade of Teflon lining to suit temperature application in Flanged End Connection.
Product Description Our Platinum TwinDrag two-speed reels are simply the finest built and most rigorously tested offshore reels available to serious big-game fisherman. Designed to be light weight yet extremely durable, they offer state-of-the-art technology not found in other reels. Complementing the reel's ultra-smooth and highly efficient TwinDrag system is a unique, graduated alphanumeric visual reference scale that works in conjunction with the preset lever to enable precise drag range settings. That in conjunction with the reel's two-speed Quick-Shift, which allows for an easy transition between high and low gears, gives anglers a decided advantage when fighting powerful fish like big wahoo, tuna and marlin. Unhindered free spool at every drag setting Heat treated pinion gears Patented TwinDrag system Stainless Steel gears Stainless Steel Springs and Clips Removable Spool stud 2 Stainless Steel anti-reverse dogs 7 Abec rated Stainless Steel bearings sealed with teflon impregnation Accudrags Harness lugs ATD Reel Bag One year warranty
Product Description The Abel Super Series Fly Reels are designed with large arbor spools. This large arbor gives great line pickup while keeping coiling to a minimum. These reels are the choice for many fly fishermen. Reel Frame, spool drag knob and foot made of 6061-T651 cold finished Aerospace grade aluminum Teflon sealed bearings: ISO9001:2000 and AS9100 Certified FAA TSO C149 Aircraft Bearings Cork Drag System is made entirely in the Abel factory: They use a superior high grade Portuguese cork with a little neatâ??s-foot oil on it Double Pawl System: Super Series reel sizes 6 and larger are built sound with therecently upgraded double pawl system. Advantages are increased reliability, back-up strength and unique as well as flexability so anglers can Interchange Large & Standard Arbors spools. Branch Office Shop Fishing Tackles Jl. Jend. Sudirman kav. 112 - 114 Jakarta - 12190 Indonesia
Precise and accurate spray application of hot melt glue using heated nozzle, adhesive tank, and air pressure. Ideal for footwear, packaging, automotive industries etc. This applicator is suitable for Hot-Melt Adhesives, consists of heated tank and heated spray nozzles. The glue spraying is rapid and uniform. The coating area can also be adjusted. The heated glue tanks are treated with teflon which help in preventing carbonization of hot melt adhesives. The machine also has a thermostatic exhaust fan to maintain machine temperature. This applicator is highly recommended for footwear, bags, belts, electronics, toys, sanitary ware, stationery, packaging, labelling, sporting goods etc. Model No. BS-834-2 Tank Capacity 5 kg Melting Rate 7 kg/hour Total Power 2.5 kW Gluing Method Spray Max Operating Temp. 250C Power Requirement 220V/50Hz, Single phase Dimensions 720 x 400 x 1450 mm Weight 70 kg
Precise and accurate hot melt adhesive applicator with heated tank and heated rollers. Perfect for footwear, bags, belts, packaging, stationary, woodworking, and more. This applicator is suitable for Hot-Melt Adhesives, consists of heated tank, heated rollers and speed control system. The machine has a thickness adjustment system and can support material thickness from 3 to 20mm The heated glue tanks are treated with Teflon which help in preventing carbonization of hot melt adhesives. The machine has an emergency stop button to prevent any accidents. This applicator is highly recommended for footwear, bag, belt, stationery, packaging, labelling, fly traps, sporting goods etc. Model No. BS-831s Tank Capacity 3 kg Melting Rate 8 kgs/hour Total Power 2.5 kW Coating Width 300 mm Max Operating Temperature 250°C Power Requirement 220V/50Hz, Single Phase Machine Dimensions 515 x 355 x 420 mm
Achieve precise and seamless edge coating with our advanced Hot Melt Applicator. Applies adhesive seamlessly to paper, footwear, bags, belts, cardboard, plastic, and many more for a flawless finish. This applicator is suitable for Hot-Melt Adhesives, consists of Heated tank and heated glue nozzles. This machine is used for Line application. The coating is even and uniform. The machine has a glue control system, the glue thickness can be adjusted easily. The heated glue tanks are treated with Teflon which help in preventing carbonization of hot melt adhesives. The machine also has a thermostatic exhaust fan to maintain Machine temperature. This applicator is highly recommended for component edge coting in courier bags, stationery, packaging, labelling, footwear etc. Model No. BS-832 Tank Capacity 1 kg Melting Rate 3 kg/hr Total Power 2 kW Gluing Method Line Max Operating Temp. 250�°C Power Requirement 220V/50Hz Air Pressure 4 kg/cm2 Weight 45 kg Dimensions 480 x 370 x 520 mm
PTFE Carbon Products Carbon filled PTFE products consist of a blend of carbon particles or fibers mixed with polytetrafluoroethylene (PTFE), commonly known as Teflon. PTFE is a highly durable fluoropolymer known for its exceptional chemical resistance and low friction properties. The addition of carbon to PTFE enhances its mechanical, thermal, and electrical characteristics, making it ideal for a wide range of applications. The Technical Indexes of the Product Item Data Unit Apparent density 2.1-2.3 g/cm3 Tensile strength 15 Mpa The elongation at break 150 % Features of Carbon Filled PTFE Products Carbon graphite filled PTFE products are widely utilized in industries such as automotive, aerospace, chemical processing, electrical engineering, and mechanical engineering. These products are available in various forms, including sheets, rods, tubes, gaskets, seals, and bearings. The inclusion of carbon in PTFE offers numerous advantages. Firstly, it improves the mechanical strength and wear resistance of the material, making it more robust and capable of withstanding high-stress conditions. PTFE carbon graphite products have enhanced load-bearing capacities and can endure higher pressures compared to pure PTFE. Secondly, carbon enhances the thermal conductivity of PTFE, resulting in efficient heat transfer and dissipation. This makes carbon filled PTFE products well-suited for applications where effective heat management is critical, such as in seals, gaskets, and heat exchangers. Thirdly, carbon improves the electrical conductivity of PTFE, transforming it from an insulating material to a conductive one. Carbon filled PTFE plastic products are employed in applications requiring static dissipation, electrical grounding, or electromagnetic shielding. Furthermore, carbon filled PTFE rod products retain the nonstick and low-friction properties of pure PTFE. They exhibit excellent release characteristics, making them highly desirable for applications where prevention of sticking, adhesion, or friction is necessary. In summary, PTFE 25 carbon filled products combine the inherent properties of PTFE, such as exceptional chemical resistance and low friction, with the enhanced mechanical strength, thermal conductivity, and electrical conductivity offered by carbon. These products find extensive use in industries where durability, efficient heat dissipation, electrical conduction, and nonstick performance are highly valued.
Bronze Filled PTFE Products Bronze filled PTFE sheets/rods are composite materials consisting of bronze particles combined with polytetrafluoroethylene (PTFE), commonly known as Teflon. PTFE is a highly versatile fluoropolymer renowned for its excellent chemical resistance, low friction, and nonstick properties. The addition of bronze enhances the mechanical and thermal properties of PTFE, making it suitable for a wide range of applications. The Technical Indexes of Bronze Filled PTFE Sheet/Rod Item Data Unit Apparent density 2.1-2.3 g/cm�³ Tensile strength 15 Mpa The elongation at break 150 % Features of Bronze Filled PTFE Rod/Sheet Bronze-filled PTFE products are commonly used in industries such as automotive, marine, oil and gas, and mechanical engineering. These products are available in various forms, including sheets, rods, tubes, gaskets, seals, bushings, and bearings. The inclusion of bronze in PTFE offers several advantages. Firstly, this filled PTFE improves the mechanical strength and wear resistance of the material, making it more durable and capable of withstanding high-pressure and high-load conditions. Bronze filled PTFE sheets/rods exhibit enhanced load-bearing capacities and can endure harsh operating environments. Secondly, bronze enhances the thermal conductivity of PTFE, resulting in improved heat transfer and dissipation. This makes bronze filled PTFE plastic products suitable for applications where efficient heat management is crucial, such as in heat exchangers, bearings, and bushings. Furthermore, PTFE 40 bronze products retain the low friction and nonstick properties of pure PTFE. They have excellent wear resistance, reducing friction and extending the lifespan of components. Bronze filled PTFE sheets/rods are particularly useful in applications where self-lubrication, reduced friction, and prevention of galling or seizing are essential.
Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuit fabrication base material is FR4/Teflon/Ceramic, pcb fabrication used in high-power power supply and motor circuits products. HUIHE CIRCUITS is one of the heavy copper PCB manufacturers, we have passed ISO9001/ISO13485/IATF16949/UL/RoHS/REACH certification.If you want to know more about thick copper pcb, heavy copper pcb, please contact HUIHE Circuits heavy copper pcb board manufacturer. Heavy Copper PCB List 2 Layer ENIG Heavy Copper PCB circuit manufacturer 4 Layer ENIG Heavy Copper PCB 6 Layer ENIG Heavy Copper PCB supplier 6 Layer ENIG Heavy Copper PCB manufacturing 6 Layer ENIG Heavy Copper PCB Fabrication Service 6 Layer ENIG Heavy Copper PCB 8 Layer ENIG Heavy Copper PCB 8 Layer ENIG Impedance Control Heavy Copper PCB 2 Layer ENIG Heavy Copper PCB The Heavy Copper PCB Plating Process Must Achieve The Following Aspects: 1. HUIHE Circuits heavy copper pcb manufacturer adds a certain value according to the area value calculated by the computer and the empirical constant accumulated in the actual production to ensure the integrity of the plating layer in the hole. 2. When the heavy copper PCB is electroplated for 5 minutes, take out the substrate and observe whether the copper layer on the surface and the inner wall of the hole is intact. It is better that all the holes have a metallic luster. 3. A certain distance must be maintained between the substrate and the substrate. 4. When the heavy copper PCB reaches the required electroplating time, a certain amount of current must be maintained during the removal of the substrate to ensure that the surface of the substrate and the hole will not be blackened or darkened. 5. HUIHE Circuits heavy copper pcb manufacturer according to the mechanical processing floppy disk for trial processing, the first part pre-inspection is carried out, and all the workpieces are processed after meeting the technological requirements.
Model features: This series of models is an open aluminum alloy profile structure heat shrink baking machine, suitable for electronic wire harness and new energy wire harness heat shrink tubes, circuit boards, inductor wire diagrams, copper bars, hardware accessories and other products (heat shrink baking size range small, but the product size is relatively long), or products that can only be heat-shrunk and baked at one end. 1. The machine uses far-infrared heating tubes for heating (the new energy wiring harness uses thermal radiation heat shrinkable tubes). There are heating tubes installed on the top, bottom, left and right, which can be heated at the same time. It is also equipped with a high-speed centrifugal fan, which can Stir the heat evenly to keep the entire box at a constant temperature; the products that need to be heat-shrunk and baked can be heated at the same time, maintaining the original characteristics of the product, so that the product does not deform or discolor after heat-shrinking or baking, and the quality Stablize: 2. Use high-temperature resistant Teflon mesh belt (temperature resistant 0-350), feeding in assembly line mode, fast baking speed and high efficiency: 3. Aluminum alloy profile structure mode, the mechanical size and structure can be customized and modified at will, and the machine model has a compact structure and exquisite design, and can also be moved and connected to the production line and controlled synchronously; 4. Intelligent control system, the heating temperature and speed can be adjusted at will, which can adapt to the temperature and heat shrinking time needs of different products; 5. Independent control electric box, away from high temperatures; the double-layer design of the heating box is sandwiched with high-temperature insulation cotton (temperature resistance 1200�°C), so that the surface temperature of the box will not be overheated, which not only makes the working environment comfortable, but also reduces Energy waste.
DHS056-50-1F The main parameters Number of circuits 50 Working temperature -40 ~+65 Rated current can be customized Working humidity 70% Rated voltage 0~240 VAC/VDC Protection level IP54 Insulation resistance 1000M @500VDC Housing material Aluminum Alloy Insulation strength 1500 VAC@50Hz,60s,2mA Electrical contact material Precious metal Dynamic resistance variation 10M Lead wire specification Colored Teflon insulated & tinned stranded flexible wire Rotating speed 0~600rpm Lead wire length 500mm + 20mm DHS056-50-1F series photoelectric slip ring 1 channel optical fiber + electric hybrid slip ring 1 optical fiber (supports single-mode/multi-mode), can transmit 1 optical fiber and 1~50 electrical signal paths at the same time, suitable for 360-degree unrestricted, continuous or intermittent rotation, and at the same time need to rotate from a fixed position to Locations where large-capacity data and signals are transmitted can improve mechanical performance, simplify system operation, and avoid damage to optical fibers due to the rotation of movable joints. Features Can transmit single or multiple optical fiber signals, multi-channel rotation; Optical fiber connectors can be selected from FC, SC, ST, SMA or LC (PC and APC), etc., which can hybridly transmit power supply, control signals, micro power signals required for instrumentation and computer automatic control; It can be used with traditional electric slip rings to form photoelectric hybrid bus rings to transmit power and high-speed data; No contact, no friction, long life, up to 100 million revolutions (more than 200-300 million revolutions for a single core); Safe and reliable, no leakage, no electromagnetic interference, and can be transmitted over long distances;
Product Description Crafted for home baristas with tighter budgets and kitchen space, the ECM Classika II PID is a high performance semi-automatic espresso machine for those who demand quality without the restriction of cost. The result is a machine that utilizes many of the same commercial grade components ECM relies on for their prosumer models but at a more modest price point. Externally, the machine boldly reinforces the fact that no corners were cut with its polished stainless steel housing and custom machined E61 group head. On the top of the machine, the large capacity railed cup tray doubles as a passively heated cup warming surface and can be removed for access to the water reservoir. Removing the tray also allows access to the pump pressure adjustment screw. As you make adjustments, you can monitor your changes can be with the pump pressure gauge mounted on the front of the machine. Beneath the pressure gauge, brew temperature can be monitored and adjusted with the PID temperature controller. The Classika brews with .5 liter stainless steel boiler and a high-performance vibration pump. Like all ECM espresso machines, the internal plumbing avoids using teflon or other plastics in favor copper tubing with brass fittings. The water reservoir holds 3 liters and is fitted with a sensor that shuts off the machine off at low volumes to prevent the boiler from running dry. An advantage of brewing on a PID machine is that you can set the temperature to match your exact parameters. This becomes important when trying to extract specific notes and flavors from certain coffees. The vaunted E61 group head performs a vital function in helping to maintain these temperature conditions thanks to its thermosyphon system. Hot water and steam are dispensed through a shared wand located on the left side of the machine. Whether you dispense steam or hot water is controlled by a steam switch that raises the temperature in the boiler when flipped on.The Classika froths using a commercial style, two-hole steam tip ideal for crafting lattes, cappuccinos, and other milk drinks.Compact and capable, the ECM Classika II PID has the features you want and quality that you can depend on. Dimensions (with portafilter): 9.84" W x 21.85" D x 15.47" H Weight: 40.78lbs 3 Liter Monitored Reservoir The water reservoir holds an ample 3 liters of water and is fitted with a sensor that shuts off the machine at low volume to keep the machine from running dry. Durable Stainless Steel Construction The Classika II PID is housed in polished stainless steel that is both tough as nails and easy on the eyes. ECM wasn't content with simply welding the drip tray onto the machine, it's actually part of the frame for enhanced durability and build quality.