NO.1 High Resolution Guide Rail.High standard galvanized steel girder, no creases and painting, which works more stably and quietly, which effectively reduce the noise of printing. NO.2 New type auto cleaning capping system, which can make sure the system raising and descending and protect printhead more efficiently. NO.3 Use new feeding gear and anti-static segmented pressure roller. NO.4 Three-stage adjustable temperature heating. Front, middle, rear, three sides of advance surface treatment, high temperature resistance. NO.5 Embedded feeding up system and Taking-up system(Optional) NO.6 Use the Imported brands THK linear guide rail and Igus towline, reliable quality assurance.
NO.1 New type auto cleaning capping system, which can make sure the system raising and descending and protect printhead more efficiently. NO.2 Three-stage adjustable temperature heating. Front, middle, rear, three sides of advance surface treatment, high temperature resistance. NO.3 Embedded feeding up system and Taking-up system(Optional) NO.4 Use the Imported brands THK linear guide rail and Igus strong towline, reliable quality assurance. Japan Epson DX5 printheads FDT technology, the smallest drop 3.5pl. The single nozzle width is up to 25.4mm, more stable and reliable, perfect print vivid image.
Valve bottomer G+H Progress for production of valve paper cement sack • Sack length : bottom width 7cm : 58–107 cm ? : bottom width 15,5cm : 66,5–115,5 cm • Sack width : 32–60 cm • Bottom width : 7–15,5 cm • Tube length : bottom width 7cm : 68–117 cm ? : bottom width 15,5 cm : 85–134 cm • Bottom center to bottom center min/max : 51–100 cm • Capping Strips : Width 6,5 - 16 cm / length 25 – 52 cm • Valve : Width 7 – 15,5 cm / length 10 – 22 cm • 1 station for forming and cutting sack bottom • 1 station for sucking and opening bottom • 1 station for forming and positioning ventil and adding double ventil from Paper/PE • 1 station for gluing bottom • 1 station for reinforcement on the bottom/bottom patch/one (1) color flexo print for both bottoms • 1 station pressing of bags at the end with drying with counter of bags in bundles, transport line for gathering bags • Gluers for different sizes of bottom • other various parts for the machine All information is given by the source, which deemed reliable. Availability is subject to prior sales.
Blister foil (hard) 4-6, 6-8 gsm heat seal coating Sealing with pvc or pvdc
a2 uv flatbed printer,digital uv flatbed printer Model UV168-2.3-A3 Standard UV Printer Brand Kossel Max. printing size A3+: 280mm*600mm Max. media thickness 180mm ( Customizable higher ) Max. media weight 20KG Print head Epson 1390 Print direction Bidirection Print thickness detection Infrared automatic detect Ink type UV environmentally ink Print ink color C,M,Y,K+W,W Add ink All UV ink usable Ink system 500ml*5 Max. printing resolution 5760dpi*1440dpi Print speed A4 (5760*1440dpi)Fully printing colourful / 111s Cooling type Water circulation + Heat sinks UV lamp life time 25000hours UV Power Max. 100W ( Adjustable ) UV lamp temperature Surface temperature 120C Control Software RIP Power 35W Interface USB2.0 ( IEEE1394 For custom ) Power 110-220V 50-60HZ ( Customizable ) Working enviroment 25-30C, 50% Humidity, Dust free Printer size 870mm*670mm*630mm Packing size 950mm*750mm*750mm (with wooden case) Print head protection Intelligent self-protect system / Manual cleaning System require Windows XP / Vista/ Win7 / MAC I Linus Country of origin Shanghai, China UV lamp system 6 Power degree adjustable system Net weight 62KG Gross weight 90KG (with wooden case) Height adjust Electronic / manual automatic adjust
dtg printer,dtg printing machine,print machine Model UV168-2.3-A3 Standard UV Printer Brand Kossel Max. printing size A3+: 280mm*600mm Max. media thickness 180mm ( Customizable higher ) Max. media weight 20KG Print head Epson 1390 Print direction Bidirection Print thickness detection Infrared automatic detect Ink type UV environmentally ink Print ink color C,M,Y,K+W,W Add ink All UV ink usable Ink system 500ml*5 Max. printing resolution 5760dpi*1440dpi Print speed A4 (5760*1440dpi)Fully printing colourful / 111s Cooling type Water circulation + Heat sinks UV lamp life time 25000hours UV Power Max. 100W ( Adjustable ) UV lamp temperature Surface temperature 120C Control Software RIP Power 35W Interface USB2.0 ( IEEE1394 For custom ) Power 110-220V 50-60HZ ( Customizable ) Working enviroment 25-30C, 50% Humidity, Dust free Printer size 870mm*670mm*630mm Packing size 950mm*750mm*750mm (with wooden case) Print head protection Intelligent self-protect system / Manual cleaning System require Windows XP / Vista/ Win7 / MAC I Linus Country of origin Shanghai, China UV lamp system 6 Power degree adjustable system Net weight 62KG Gross weight 90KG (with wooden case) Height adjust Electronic / manual automatic adjust
CPC1.02, CP Tronic, quick action plate, cocking, preset
Vat change to Aluminum Build volume form128*128*180 to 128*128*185 Optic 5000 hours update10000 hours
Product Dimensions: 480 x 480 x 560 (mm) Build Vol. : 220 x 220 x 200 (mm) Technology: Industrial FDM Layer resolution (mm) : 0.02 ~ 0.2 (mm) Nozzle Diameter: 0.12 - 4(mm), single nozzle, selectable Printing Speed: 250 mm / s Filament Diameter: 1.75mm Modeling Error: 0.005 ~ 0.006 mm Weight: 20 Kgs Supported OS: Windows 10
Er will never exceed. When laminating, it is very easy to make top paper and bottom paper alignment, or top sheet exceeded. 6. Fully automatic glue supply system: glue will be automatically supplied during lamination, and recovered, avoiding glue wasted. 7. Scientific design for linear speed of metering roller, avoiding glue thrown when high-speed running. 8. The whole machine adopts plc control system, compared with other time-delay device or middle relay control, the bottom paper is transferred more precise and stable, furthermore, speed is greatly increased, and circiut breakdown can automatically display and alarm. 9. Clean the lower roller in gluing section by blade with circulated water, complete cleaning, convenient to replace the blade 10. Floating movable pressing section is adopted to make the laminated paperboard smooth. This section can be moved front and back to take in paper conveniently. 11.. Gear rach is used to control the lift of water tray, which is easily taken out for cleaning. Model Hrbtmj-1300h Hrbtmj-1500h Hrbtmj-1600h Max size of cover face 1300mmx1250mm 1500mmx1250mm 1600mmx1250mm Mix size of cover face 360mmx360mm 360mmx360mm 360mmx360mm Economic speed 0-80 piece/min 0-80 piece/min 0-80 piece/min Precision +-1 +-1 +-1 Power 6kw 6kw 6kw Size 8.8m x 1.95m x 1.5m 8.8m x 2.15m x 1.5m 8.8m x 2.25m x 1.5m Weight About 3t About 3t About 3t
Er exceed. When laminating, it is very easy to make top paper and bottom paper alignment, or top sheet exceeded. 6. Fully automatic glue supply system: glue will be automatically supplied during lamination, and recovered, avoiding glue wasted. 7. Scientific design for linear speed of metering roller, avoiding glue thrown when high-speed running. 8. The whole machine adopts plc control system, compared with other time-delay device or middle relay control, the bottom paper is transferred more precise and stable, furthermore, speed is greatly increased, and circiut breakdown can automatically display and alarm. 9. Clean the lower roller in gluing section by blade with circulated water, complete cleaning, convenient to replace the blade 10. Floating movable pressing section is adopted to make the laminated paperboard smooth. This section can be moved front and back to take in paper conveniently. 11.. Gear rach is used to control the lift of water tray, which is easily taken out for cleaning.
E piled up to 1.8m. 4. Bottom sheet is automatically fed; the two sheets are piled freely; high efficiency 5. Advanced elastic front register is used for location, high register precision, bottom paper will never exceed. When laminating, it is very easy to make top paper and bottom paper alignment, or top sheet exceeded. 6. Fully automatic glue supply system: glue will be automatically supplied during lamination, and recovered, avoiding glue wasted. 7. Scientific design for linear speed of metering roller, avoiding glue thrown when high-speed running. 8. The whole machine adopts plc control system, compared with other time-delay device or middle relay control, the bottom paper is transferred more precise and stable, furthermore, speed is greatly increased, and circiut breakdown can automatically display and alarm. 9. Clean the lower roller in gluing section by blade with circulated water, complete cleaning, convenient to replace the blade 10. Floating movable pressing section is adopted to make the laminated paperboard smooth. This section can be moved front and back to take in paper conveniently. 11.. Gear rach is used to control the lift of water tray, which is easily taken out for cleaning.
ws7 and windows8, vista Power consumption:150w Power supply:ac 100-240v, 50/60hz Operating temperature:+5-+40 Gross weight/net weight:35kg/30kg/carton Packing dimension(lxdxh):660x690x560mm Packing dimension:530mmx585mmx330mm Gross weight:35kg/ct
Optical brightener cxt (c.I.71) Specification Appearance: Off-white powder Use:Mainly be used as brightener of cotton, linen, silk, polyamide fiber, wool and paper. Package: 25kg paper board bucket. It can be packed according to the requirement of the user. 25kg paper board bucket. It can be packed according to the requirement of the user.
4-hi tower with "h" type architecture "h" priunting module consists of two printing couples, one couple, bottom one, is of arch type architecture and the top printing couple is of u type architecture. This module can print 2+2 colors on one web. 4 hi tower consisting of 2 such h modules placed one a top other will print 4+4 colours on one web. The 'h' over 'h' is driven by 'm' series timer belt for high accuracy and maintenance free drive. This also helps in beter 4+4 registration. The height of the tower gets reduced due to the typical arrangement of the printing couples as mentioned above. The print quality also is better because of short travel of the paper between 2 printing couples. We packed our machine in standard export worthy packing cases. The weight of above machine is : 10000 kgs. Dimension : 3.2 x 3 x 5 meter
Wn-121 winon one color inkwell pad printer Usage: printing on electronic products, home appliance, toys, stationeries and plastics. Max cliche size(mm): 150 x 100 Wn-121 winon one color inkwell pad printer: 1. Made of high-quality aluminum; 2. Single colour inkwell; 3. Microelectronic keyboard control operating interface; 4. Rubber heads with independent upper/lower strokes; 5. Speed regulation and control; 6. X, y and z axles; and 7. Angled adjusting workbench. This machine is greatly known for its high printing efficiency, simple operation system, and its wide application ranges, such as flat, curvy and irregular surfaces. It is widely employed on surfaces of electronics, electric appliances, hardware, plastics, toys, stationeries, and etc. This machine can also be assembled with such fittings as cleaning Dimension(mm): 560 x 340 x 540 Weight(kg): 36
1. Accurate and reliable Mitsubishi PLC control. 2. Solid and durable PVC molding without corrosion. 3. Long-operation-life roller bearing stand assures durability of the machine. 4. Smooth and easy-caring main worm gear driving. 5. Energy and water saving. Internal recycle and tap water washing are optional, environment friendly. 6. Wide diving developing structure assures sufficient developing. 7. Developing filter system keeps the plate clean and eliminates dirts effectively. 8. Special-designed brush cleans the plate thoroughly. 9. Automatic gumming and glue recycling. 10. Ageing-resistance gum roller meets the highest demand of reproduction of screen dots when developing CTP plates. 11. Double washing function, convenient for secondary washing and gumming after retouching. 12. Compatible with automatic plate receiver and clean water filtering system. 13. Compatible with CTcP plate maker.
1. Solid and environment-friendly full-cover metal machine frame prevents UV light from leaking out. 2. Micro computer control (manual or automatical) 99 sets of data can be selected. Multidigit LED displaying. 3. Three drawers for stores and standby plates. 4. UV light integrator assures comprehensive scanning. 5. Multiple exhausting system and multistep exposure system selects multi-exposure according to different materials and eliminates tape track. 6. Pre-vacuum-exhausting, enhanced vacuum exhausting, exposure and enhanced exposure. 7. Anti-electrostatic rubber pads and air-intake all around assures comprehensive exhausting with high efficiency and speed. 8. Yellow safe work light. 9. Long-time-lasting constant metal-halide lamp, 5KW.(25%,50%,100% light intensity for option) 10. Strong cooling air fan assures the normal operation life of glass and lamp. 11. High-quality lamp initiates exposure with parallel light spectrum and assures the quality of printing down.
1.Flip top double sided exposure at the operation height of 1200mm.simple and convenient operation meets the requirement of mass and fine printing down. 2.Dual-loop speed vacuum-exhausting system kits fast and smoothly. It is applicable to density screen lines and crystal screen dots, the dots being undistortured. 3.Precision light integrator accurately keeps the error within 2%, eliminating unsteady exposure and distortion of screen dots caused by the deterioration of lamps, activation of light and instability voltage keeps the uniformity of voltage, etc. 4.UV resisting and anti-oxidation light reflector keeps the uniformity of light and plate. 5.Ultra-short exposure time of 5000W shifting constant UV lamp, applicable to printing of newspaper and mass plate printing. 6.Enhanced steel plates processed by numerical control and thick film coating of electrostatic powder for ultra-long operation life.
Corrugated box printing plate making machine, stereo making machine, nonwoven bag printing plate making machine Fip a2 400 kg, 120 x 100 x 125
