Sintered Bronze Filter Suppliers and Manufacturers

Products Description Sintered copper powder filter element is also called sintered copper. Like titanium and stainless steel powder sintered filter elements, it is also a breathable porous material formed by molding, isostatic pressing, etc., and then sintered by high temperature vacuum. It is a new type of material used in filtration and high-tech industries. Due to the advantages of stable pores, good strength, large amount of dirt, can be directly processed on the substrate, can be cleaned, and can be customized according to the required shape and size, sintered copper powder filter element has been widely used in pneumatic cylinders, electronic accessories, hydraulic filter elements, air dust removal, and gas distribution. , heat sink, mold making and other industries. The selection of precision is very critical In the process of using the sintered copper powder filter element, the selection of precision is very critical. If you choose a product with a smaller precision, if there is no corresponding pressure, the product flow will decrease and cannot meet the flow requirements; if you choose a product with a higher precision, it will It cannot intercept the required impurity particles, and cannot achieve the effect of filtering or dust removal. If it is used in a high temperature environment, it will also have a certain impact on the performance of the product. Features 1. Sintered copper powder filter element has stable penetration and high filtration accuracy; 2. Can better withstand thermal pressure and impact; 3. High strength, good plasticity, anti-oxidation, corrosion resistance, good assembly; 4. Strong regeneration ability and long service life; 5. Sintered copper powder filter element is resistant to rapid cooling and rapid heat, and has better performance than filters made of paper, copper wire mesh and other fiber cloth, and is easy to assemble, disassemble and clean; 6. It can work at higher temperature and in corrosive medium, and can be welded, bonded and machined. Main application of the product 1. Pneumatic valve cylinders and other pneumatic components are used to filter air, remove impurities in the air or gas distribution, decompression, interception, etc., and are fixed and installed by interference, stamping, screwing, threads, and clamps. 2. Oil-gas separation, solid-liquid separation, and oil-removal impurity filtration and separation, according to experience, can operate continuously under a pressure of 20Mpa, and can effectively remove impurities in the pore size according to different conditions of precision and pressure.

Titanium powder sintered filter disc is made of industrial pure titanium powder (purity 99.6%) as raw material, which is formed by rolling the powder and then sintering at high temperature and high vacuum. There is no need to add any binder during rolling. Because the raw material is high-quality titanium powder, the titanium powder sintered filter has a uniform structure, a porosity between 30% and 40%, a filtration accuracy of 0.22 microns to 100 microns, and high separation and purification efficiency. High temperature resistance, acid and alkali corrosion resistance. The sintered products are laser cut or lathe cut according to the size and style required by customers. The main shapes are: round, square, hexagonal and special-shaped pieces. Product parameters Product name: Customized porous titanium powder sintered filter disc for beverage filtration Filtration accuracy: 10 microns Porosity: 35% Size: 40mm 40mm (customized) Applicable temperature: 300 Features 1. Porosity, good air permeability; 2. Depth filter; 3. Easy to clean and backwash, long service life; 4. Narrow pore size distribution; 5. High separation efficiency and good filtration performance; 6. Corrosion resistance. The main usage Mainly used for liquid-solid separation of beverages, reverse osmosis pre-filtration

Sintered wire mesh is the combination of different layer of wire mesh sintered under high temperature inert gas inside the furnace. During the sintering (diffusion bonding) process, indiviual wires and each adjacent layer of the mesh bond to each other.After cooling, the sintered wire mesh is rigid and completely flat readily to be finished. Sintered Wire Mesh Material: SUS304 (AISI304), SUS316 (AISI316), SUS316L (AISI316L), Alloy Metal as well Sintered plate Standard Size: 500 Ã?? 1000 mm, 600 Ã?? 1200 mm, 1000 Ã?? 1000 mm, 1200 Ã?? 1200 mm, or customized. Sintered wire mesh layers: 3 5 6 7 8 10 layers. Sintered mesh filtering rate: 1-100 micron Sintered filters: sintered mesh can be shaped into any tube, disc, conical shapes according to your requirements.

Item Name Sintered Metal Porous Disc Filter Material inconel 600 601 625 and other metals Filtering rate 0.2um 0.3um 0.5um 1um 3um 5um 10um 15um 20um 30um 50um 80um 100um Shape Round disc, Ring shape, and other special shape. Diameter Max diameter for round shape up to 500mm Thickness Min 1mm to Max 20mm Particle removal efficiencyï¼?Up to 99.99% Density rangeMetal edged process. Special size can be made as per the drawing or request. Application Stainless Steel Sintered Powder Metal Porous Disc Filter is widely used in Many excellent filtration solutions for specialized solving the problems in petrochemical, chemical engineering, coal chemical industry, silicon, lithium battery, metallurgy, pharmacy, food and nuclear power industry, etc. Titanium porous sintered disc&sheets are now popular used as gas diffusion layer in PEM Electrolyzer stacks.

General technical data Size Pneumatic connection, [NPT/BSP] ⅛ö 8540;ö +ö +ö 1ö Operating medium Compressed air Design Filter regulator Proportional standard Type of mounting Via accessories In û line installation Assembly position Vertical ¦5 ¦ Grade of Filtration [um] 5 to 40 Micron Filter Material Sintered Bronze / PolyProplene Max. hysteresis [kg/cm2] 0.2 Pressure regulation range [kg/cm2] 0.5 to 7 0.5 to 12 Pressure indication Gauge connection [NPT] Via pressure gauge +ö / ⅛ö (optional) Bowl Capacity [cc] 80 Max. Flow [l/min] 800/2400 (optional) Max Input Pressure [kg/cm2] 12/18 Condensate drain Turned manually Materials Body; Diecast Aluminum alloy, Internal Components; Stainless steel, brass, plated steel, acetal. Pressure Gauge Material Brass internals with CS Cover/Brass internals with SS cover / Fully SS Knob Non Rising (SS screw with Acetal Handle)/ Rising (SS screw with Phenolic Handle) Diaphragm Buna û N elastomer and polyester fabric / Neoprene coated Nylon.

MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max

The multi-layer metal sintered mesh filter element is made of metal meshes with different wire diameters and meshes sorted in a certain order and sintered at high temperature. It has higher strength than stainless steel fiber felt, better permeability than metal powder products, uniform pore size distribution, good permeability, high strength, strong corrosion resistance, high temperature resistance, weldable, renewable, long life, easy to clean and not easy to break. Product parameters Material: stainless steel 304 or 316L; Size: 1000mmx500mm, 1200mmx600mm, 1000mmx1000mm (customizable); Filtration accuracy: 2um-300um; Classification: single-layer, double-layer, three-layer, five-layer, seven-layer and multi-layer metal Note: Special specifications can be customized according to the requirements of the buyer. Features 1.High strength and durability: This feature is achieved through high temperature sintering, which is a process of sintering material through heat and pressure without melting it. The high temperature sintering process enables the material to have a high level of strength and durability, making it resistant to wear and tear. 2.Anti-corrosion and heat resistance: This material can withstand high temperatures up to 600 C and is resistant to corrosion, which makes it ideal for use in harsh environments. 3.Steady filter rating: This material has a steady filter rating that ranges from 2 micron to 300 microns. This means that it can effectively filter out particles of different sizes, making it suitable for a wide range of applications. 4.Filter mesh not easy to deform: The filter mesh is protected by two layers, which makes it difficult to deform. This feature ensures that the filter mesh maintains its shape and continues to function effectively even under high pressure or high viscosity environments. 5.Versatile in manufacturing processes: This material can be cut, bent, punched, stretched, and welded, making it versatile in manufacturing processes. It can be easily customized to fit different shapes and sizes, making it suitable for a wide range of applications. Application aspects and industries Metal meshes of various wire sizes are sorted in a specific sequence, sintered at high temperatures, and used to create the multi-layer metal sintered mesh filter element. It is stronger than stainless steel fiber felt, more permeable than metal powder goods, evenly distributed pore size, strong corrosion resistance, high temperature resistance, weldable, renewable, long-lasting, simple to maintain, and difficult to break. Multi-layer metal sintered mesh filter elements have many applications in the filtration of high-temperature and high-pressure media (liquid-solid separation, gas-solid separation), including oil sand separation in oil fields, high temperature gas dust removal, beverage filtration, oil filtration, and water treatment.