Liquid ammonia / anhydrous ammonia (NH3) is an important chemical raw material with a wide range of applications. Liquid ammonia can be used as a refrigerant. It is mainly used to produce nitric acid, urea and other chemical fertilizers, and can also be used as a raw material for medicine and pesticides. In the defense industry, it is used to make propellants for rockets and missiles. Application: Agriculture Industry, Pharmaceutical Industry, Textile Industry, Refrigerant, Defense Industry etc. Packing: 100Ltr Cylinder, 800Ltr Cylinder, ISO Tank Item Specification Purity: 99.5 % Oil (Max): 0.02 % Moisture (Max): 0.5 % Residue On Evaporation % By Volume: 0.05 % Pyridine: Nil Napthanlene: Nil Phosphic: Passes Test Sulphur Compounds: Passes Test
Glacial acetic acid (CH3COOH) is commonly used as analytical reagents, general-purpose solvents, non-aqueous titration solvents, chromatographic analysis reagents, and organic synthesis. used for the synthesis of vinyl acetate, cellulose acetate, acetate, metal acetate and halo-acetic acid. It is also an important raw material for pharmaceuticals, dyes, pesticides and organic synthesis. Application: Mainly used in the production of vinyl acetate monomer, then acetic anhydride and ester production. Packing: 30kg Drum, 215kg Drum, 1000 Kg IBC, ISO Tank. Item Description Acetic acid: Min. 99.8% Color(APHA),Pt-Co: Max. 10 Acetaldehyde: Max. 0.05% Formic acid: Max. 0.06% Water: Max. 0.15% Iron(Fe): Max. 0.0004% Residue after evaporation: Max. 0.01% Permanganate: Min. 30min
Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, or deep purple to rusty red. The iron is usually found in the form of magnetite (Fe3O4, 72.4% Fe), hematite (Fe2O3, 69.9% Fe), goethite (FeO(OH), 62.9% Fe), limonite (FeO(OH)n(H2O), 55% Fe) or siderite (FeCO3, 48.2% Fe). Ores containing very high quantities of hematite or magnetite (greater than about 60% iron) are known as natural ore or direct shipping ore, meaning they can be fed directly into iron-making blast furnaces. Iron ore is the raw material used to make pig iron, which is one of the main raw materials to make steel 98% of the mined iron ore is used to make steel. Item Specification Fe: 57 Min SiO2: 4 Max Al2O3: 5.5 Max Moist: 12 Max P: 0.08 Max S: 0.04 Max +40mm: 5 Max -6mm: 20 Max LOI: 7 About TI: 70 Min AI: 15 Max RI: 60 Min RDI: 25 Max DI: 10 Max
In its mineral form Bauxite, Aluminium is the most abundant metal in the earth's crust. Bauxite contains one of a variety of hydrated aluminium oxides (gibbsite, boehmite or diaspore), which are often expressed as Al2O3xH2O but are more commonly regarded as impure Al2O3. Bauxite is claylike and earthy, and ranges in colour from white to deep brown or red according to the nature and quantity of its components. The major impurities in Bauxite are iron oxides (goethite & hematite), silicon dioxide, the clay mineral kaolinite as well as small amounts of anatase (TiO2). Consequently, its composition varies considerably with alumina constituting from about 50% to about 70%. Aluminium content can be accurately and precisely determined over a broad analytical range simultaneously along with Si, Fe, Mn, Ti, Zr and up to 20+ other elements. Item Specification Color: Brown, yellow / light red Granularity: 0-1/1-3/3-5/5-8 mm, 200/325 mesh Application: Aluminium/Precision Casting/Refractory Density: 4.3 g/cm3 Hardness: 1-3 Fe2O3 Content: 3.0% Max CaO Content: 0.2 Max Package: 25 kg/bag Payment terms: T/T L/C
Zinc ore is most commonly found as zinc carbonate (ZnCO3), known as calamine or smithsonite. It generally occurs as rounded, crystalline crusts or granular, honeycombed masses that have a vitreous or pearly luster and are typically dirty brown or grey in colour. Zinc is a chemical element with the symbol Zn and atomic number 30. Zinc is a slightly brittle metal at room temperature and has a shiny-greyish appearance when oxidation is removed. It is the first element in group 12 (IIB) of the periodic table. In some respects, zinc is chemically similar to magnesium: both elements exhibit only one normal oxidation state (+2), and the Zn2+ and Mg2+ ions are of similar size. Zinc is the 24th most abundant element in Earth's crust and has five stable isotopes. The most common zinc ore is sphalerite (zinc blende), a zinc sulfide mineral. The largest workable lodes are in Australia, Asia, and the United States. Zinc is refined by froth flotation of the ore, roasting, and final extraction using electricity (electrowinning). Item Specification LE: 60.244% Zn: 32.767% Pb: 4.403% Fe: 2.244% Ti: 0.225% Hf: 0.073% V: 0.03% Zr: 0.014% Moisture: >3
The main copper sulphide minerals are chalcopyrite (CuFeS2) chalcocite (Cu2S), covellite (CuS), bornite (Cu5FeS4), tetrahedrite ((Cu,Fe)12Sb4S13) and enargite (Cu3AsS4). The largest source of copper is from porphyry ore deposits in which one or a combination of the minerals occurs. A typical copper sulphide ore contains various levels of iron sulphide types that generally include pyrite (FeS2) and pyrrhotite (Fe1-xS). Often gold and silver are present which may either be associated with the sulphides or are free. The gangue particles can consist of a range of silicate minerals from quartz to talc and clays. Item Specification CR2O3: 42% Basis: 40% Min CR/FE Ratio: 1.35:1 MGO: 14% Max AL2O3: 16% Max SIO2: 10% Max P: 0.01% Max S: 0.01% Max Size 0-2 MM: (95% Min) Moisture at 105C or 110C: 8% Max
Dead burned magnesite 97% is a chemical substance, which means that when magnesite is calcined at 1800C, carbon dioxide completely escapes, and magnesium oxide forms a dense block of periclase. This dead burned magnesite has a high degree of fire resistance. Its main component is magnesia, which is made of natural special magnesite magnesia through flotation purification, light burning, fine grinding, high pressure ball pressing, and ultra high temperature oil shaft kiln calcination. Application: Dead burned magnesite 97% are made from sorted super grade natural magnesite through sections including float concentration, calcination, fine grinding, high pressure briquetting and ultra high temperature sintering in heavy oil shaft kilns. They are good quality materials for making magnesia bricks and monolithic refractories. Packing: Jumbo bag(or according to the customer requirement)
When naturally occurring magnesium carbonate(magnesite) is fired at around 800-1500 it becomes what is known as ''caustic calcined magnesite''. The resulting magnesium oxide grains have the outer form of the magnesium carbonate and depending on the firing temperature are porous and more or less reactive due to their large inner surface area. It's also called industrial grade caustic calcined magnesite Application: In the production of magnesium salt, MgO oxide is used as raw material to react with acid. In Refractory, Mgo is used as the Refractory of crucibles. In energy plants, MgO is used to remove sulfur trioxide that are harmful to plants and the environment. In the rubber and plastic industry, Mgo is used as Filler, acid acceptor, anti-coking component and curing acid. Packing: 50kg pp bag with PE coating outside/ PE inner bag, 1250kg Jumbo bag.
Gypsum powder is a superior construction material due to its ability to create an extremely comfortable and aesthetic ambience. It is a natural material, completely odourless, and is easily available in nature. Gypsum is a material that possesses a natural mechanism to perfectly balance indoor climate and humidity. There are a lot of exceptional features of gypsum products that make them perfect for indoor finishing. Gypsum products are environment-friendly and fire-resistant. We offer thermal as well as acoustic insulation. Application: Gypsum panel or building plasters, mould or statutes, grout of marble, clay and ceiling tiles, color additive and also act as an additive to other products. Packing: 25kg, 50kg and 1000kg jumbo bag. Item Specification Color White Initial Setting Time: Minutes 8- 12 Final Setting Time: Minutes 13 -18 Water Stucco Ratio %: 70 - 75 Compressive Strength: N/mm2 15 - 17 Flexural Strength N/mm2: 5 - 6 Fineness %: 200 mesh Sieve pass > 96 CASO4H2O %: > 97 Sodium Chloride %:
Quicklime (or calcium oxide or burnt lime) is obtained by calcining pure limestone at temperature above 9000C. This highly reactive product is essential to many industrial processes. Calcium oxide (CaO), commonly known as quicklime or burnt lime, is a widely used chemical compound. It is a white, caustic, alkaline, crystalline solid at room temperature. The broadly used term lime connotes calcium-containing inorganic materials, in which carbonates, oxides and hydroxides of calcium, silicon, magnesium, aluminium, and iron predominate. Application: Steel Making, FGD, Construction, Masonry & Mortars, Water Treatment, Chemical Processes, Mining Industry, sugar industry, Paper, Pulp and PCC, Remediation of Sludges and Wastes and Glass Manufacturing. Packing: 1000kg Jumbo bag. Item Specification CaO: 92.5% ± 2 Loss on Ignition at 1000 °C: 4% ±2 Grain Size: 10- 60 mm Reactivity: High
This wood belongs to the shorea, which is a type of hardwood. It is most often employed in the making of furniture such as a bed, sofa, and also in flooring and roofing applications. Owing to its lightweight and light pink to light brown color variants, this wood is preferred for the interior designing. For this reason, we are facing a huge demand for the product. Meranti is a medium density hardwood. The timber glues with common adhesives, nails easily and stains well allowing ready finished in a variety of interal and external above ground applications. Color: Heartwood varies from pale pink to dark red, or from white to straw to yellow. Sapwood cannot be reliably identified by colour difference Origin: A tropical rainforest species found throughout South-East Asia and the islands of the South West Pacific region including the Philippines, Indonesia and east Malaysia. Application: Plywood, interior furniture, general construction, concrete forms, veneer, and boatbuilding. Item Specification Tree Size: 100-130 ft (30-40 m) tall, 3-5 ft (1-1.5 m) trunk diameter Average Dried Weight: 40.9 lbs/ft3 (655 kg/m3) Specific Gravity (Basic, 12% MC): 0.55, 0.66 Janka Hardness: 1,070 lbf (4,740 N) Modulus of Rupture: 14,080 lbf/in2 (97.1 MPa) Elastic Modulus: 1,781,000 lbf/in2 (12.28 GPa) Crushing Strength: 7,940 lbf/in2 (54.8 MPa) Shrinkage: Radial: 2.6%, Tangential: 5.3%, Volumetric: 7.2%, T/R Ratio: 2
It has a beautiful natural honey golden hue, but more importantly it is famous for being highly resistant to rot, pests (bugs, termites and worms), and fungi in both land and marine environments. Teak is the premier choice for any requirement in the marine industry, from decks and interior work, to docks. Teak is naturally water-resistant and physically very strong and durable. It is not prone to significant expansion or contraction with humidity changes. The oils in teak are what make it weather-resistant and it requires basically no care when left outside. Its high silica content gives it non-skid properties as well as durability. This makes teak a great choice in damp environments, or in areas where slipping could be very dangerous. Application: Ship and boatbuilding, veneer, furniture, exterior construction, carving, turnings, and other small wood objects. Below are the popular sizes we are offering: Teak Round Logs Teak round logs are a premium choice for those in the market for lumber and timber products. The round logs are the result of a peeling process that removes the bark and exposes the wood's natural grain. Teak Square Logs Teak square logs are created through a process that involves cutting the round logs into square pieces, exposing the natural grain of the wood. This process results in a beautiful and smooth surface that is ready for further processing. Teak Cut to Size Timber Teak Cut to size timber has been precisely cut to the desired dimensions and specifications of a customer. The benefit of cut to size timber is that it eliminates the need for the customer to do any additional cutting or shaping, saving time and effort. Origin: Burma, Ecuador, India, Panama, Costa Rica, Nigeria, Ghana, Brazil, etc. Item Specification Tree Size: 100-130 ft (30-40 m) tall, 3-5 ft (1-1.5 m) trunk diameter Average Dried Weight: 40.9 lbs/ft3 (655 kg/m3) Specific Gravity (Basic, 12% MC): 0.55, 0.66 Janka Hardness: 1,070 lbf (4,740 N) Modulus of Rupture: 14,080 lbf/in2 (97.1 MPa) Elastic Modulus: 1,781,000 lbf/in2 (12.28 GPa) Crushing Strength: 7,940 lbf/in2 (54.8 MPa) Shrinkage: Radial: 2.6%, Tangential: 5.3%, Volumetric: 7.2%, T/R Ratio: 2
This is a temperate hardwood. Oak tree has deep roots and grows on a heavy, wet soil. It grows from 65 feet to 130 feet in height with trunk as wide as 15 inches to 30 inches in diameter. White Oak is a rough barked tree of great and impressive girth. This is a strong rot-resistant, beautiful, easy to work, economical and holds exceptional value to woodworkers. Features: Durable, Long-lasting, less likely to warp when exposed to sunlight, good water-resistant properties, highly resistant to wear and tear, ideal for liming, stains and polishes well, etc. We can offer below types: White Oakwood (Origin: France, Germany, Finland, Ukraine, Romania) Red Oakwood (Origin: United States, Western and Central Europe) Item Specification Tree Size: 65-85 ft (20-25 m) tall, 3-4 ft (1-1.2 m) trunk diameter Average Dried Weight: 47.0 lbs/ft3 (755 kg/m3) Specific Gravity (Basic, 12% MC): 0.6, 0.75 Janka Hardness: 1,350 lbf (5,990 N) Modulus of Rupture: 14,830 lbf/in2 (102.3 MPa) Elastic Modulus: 1,762,000 lbf/in2 (12.15 GPa) Crushing Strength: 7,370 lbf/in2 (50.8 MPa) Shrinkage: Radial: 5.6%, Tangential: 10.5%, Volumetric: 16.3%, T/R Ratio: 1.9
We bring forth a cost-effective and qualitative range of Pinewood logs that are used in a variety of applications such as industrial packaging, scaffolding and as lumber beams, etc. These are available in standard and customized sizes as per the needs and can be supplied as heat treated. Pine belongs to the Pinaceae botanical family and has over 100 different varieties, most of which can be found north of the equator. Depending upon location, pine tree can grow a maximum height of 40 m and different varieties may develop different properties. Applications: - Building and construction - Interior furnishing, furniture - Manufacture of composite wood materials - Wood and paper pulp - Masts and poles - Windows, facade panelling
PVC resin is a polymer compound formed by polymerization of vinyl chloride monomer (VCM), and its structure unit is [CH2-CHCL]n. polymerization degree is usually 590-1500. According to the content of residual polyethylene monomer in PVC resin can be divided into: industrial grade, food hygiene grade and medical grade. The appearance of PVC resin is white powder. PVC resin SG3 SG5 SG8 is flame-retardant (flame retardant value above 40), high chemical resistance (resistant to concentrated hydrochloric acid, 90% sulfuric acid, 60% nitric acid and 20% sodium hydroxide), mechanical strength And the advantages of good electrical insulation. But its heat resistance is poor, with a softening point of 80�°C, it starts to decompose and change color at 130�°C, and precipitate HCI. Application: It is widely used in the production of polyvinyl chloride boardy leatheroid, paint and adhesive agents, paint and adhesive. Packing: 25kgs two layers draft paper bag or 1000kgs PP bag.
ELTEE DMCC is known for its Top Quality Potassium Sulphate (water soluble) NPK - 00:00:50. We supply our products to 17 reputed countries of World and our product is well accepted by our valuable buyers. About Product : Potassium Sulphate is a high-grade potassium fertilizer containing high Sulphur, high Potassium, and low Chlorine. It is mainly used for grapes, citrus, flowers, tobacco and anaerobic crops. It is also used for cutting and cultivating delicate crops (such as greenhouse cultivation, hydroponic crops, etc.) considered as a premium fertilizer. Packing: 25kg bags, 50kg bags, 1200kg jumbo bags, and customer's marking bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Appearance : White Powder K2O %: Min 50.0 Chloride (as Cl) %: Max 1.0 Moisture %: Max 0.5 Sulphur: Min 18.0 pH Value (1% Solution): 2-3 Insoluble Matter: Max 0.3 Sodium: Max 0.4 Na as NaCL: Max 1.1 Appearance : White free flow powder.
Potassium Sulphate is a high-grade potassium fertilizer containing high Sulphur, high Potassium, and low Chlorine. It is mainly used for grapes, citrus, flowers, tobacco and anaerobic crops. It is also used for cutting and cultivating delicate crops (such as greenhouse cultivation, hydroponic crops, etc.) considered as a premium fertilizer. Packing: 25kg bags, 50kg bags, 1200kg jumbo bags, and customer's marking bags. Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation. Item Specification Appearance : White Powder K2O %: Min 50.0 Chloride (as Cl) %: Max 1.0 Moisture %: Max 0.5 Sulphur: Min 18.0 pH Value (1% Solution): 2-3 Insoluble Matter: Max 0.3 Sodium: Max 0.4 Na as NaCL: Max 1.1
Eltee DMCC is the top leading suppliers of Soda Ash Dense in the world. We supply Soda Ash Dense to all the major galss manufacturers of the world. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Physical Properties: * Sodium Carbonate (Na2Co3)% : 99.5% Min * Bulk Density : Ib./ft3 : 62.4 - 68.6 * GPL : 1000 - 1100 Chemical Properties: * NaCl Weight % : 0.04% Max * Si02% : 0.03 Max * Organic Matter as C% : 0.01% Max Product Usage : * Glass Industries * Chemical Intermediates * Soap and Detergent formulations * Water Treatment * Flue Gas Desulfurization * Pulp and paper
Eltee DMCC is the top leading suppliers of Soda Ash Dense Sachi Brand in the world. We supply Soda Ash Dense Sachi Brand to India, Bangladesh, China, Indonesia , Brazil, Egypt, Georgia, Japan, Jordan, Lithuania, Kenya, Malaysia, Nigeria, South Korea, Spain, United Arabian Emirates, Uganda, Thailand, Tanzania, Vietnam etc . Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Physical Properties: * Sodium Carbonate (Na2Co3)% : 99.5% Min * Bulk Density : Ib./ft3 : 62.4 - 68.6 * GPL : 1000 - 1100 Chemical Properties: * NaCl Weight % : 0.04% Max * Si02% : 0.03 Max * Organic Matter as C% : 0.01% Max Product Usage : * Glass Industries * Chemical Intermediates * Soap and Detergent formulations * Water Treatment * Flue Gas Desulfurization * Pulp and paper