Control :by technician Needed air :10.5 bar 12 m³/min.(duct 40 hdp) Air engine : double effective, 740 watt (2 pieces) Needed air for engines : 6 bar-1.6m³/min. Cable installing velocity : 0, 30, 50m/min. Lay down power :80~85 kg. Dimensions (width x lenght x height) : 365mm x 330mm x 540mm Weight of machine :46kg. In chrome box.
Optical fiber cables
Production The td1827 optical fiber identifier is a low cost. Portable instrument designed to detect optical signals without disrupting traffic. During maintenance, installations, rerouting or restorations, its often necessary to isolate a specific fiber. By inserting the fiber into its adapter head, it can identify sm optical fibers without any damage by detecting the optical signals being transmitted through them so as to avoid the opening of the fiber at the spice point for identification, and thus avoids the interruption of the service .In the presence of traffic, the intermittently audible tone is activated. The td1827 optical fiber identifier also aows relative core power display and identification of the 270hz, 1khz and 2khz frequencies. When they are used to detect the frequency, the continuously audible tone is activated. There are four types of adapter heads available: 0.25, 0.9, 2.0 and 3.0. The td1827 optical fiber identifier is powered by a 9v alkaline battery. Efficiently identifies the traffic direction and frequency tone (270hz, 1khz, 2khz) without any damage of the fibers. Displays the core power of the fibers (-50~+0dbm) Low bending loss and highly efficient output Easy-to-replace adaptors (0.25, 0.9, 2.0, 3.0 to match various optical cables) Mechanical damp design of adapter heads to ensure the fiber without damage. Operation design, easy-to-sue Application maintenance in telecom maintenance catv test lab of optical fibers
FC/PC-FC/PC-SM-SX-3.0mm-3m. Plastic Packing.
1. "lucent" nca 8055-216 tw (outdoor accuribbon) in the quantity of 1, 700 km 2. "corning" nz-dsf 216 tw (outdoor 2 cor non-metalic) jelly with two (2) parallel steel in the quantity of 200 km. Drum : 192 Volume: 20/22 container 40/ft
Terminated with SC, FC, ST, LC, MU, E2000, MTRJ, MPO connectors. Features: Low insertion loss: -SC/FC/ST/LC/MU/E2000: SM
Low loss, low dispersion, unique fiber spare length control and advanced cabling technology make the cable has excellent mechanical and environmental properties. Optical fiber ribbon enlarged the cable capacitance and improved fusion efficiency. Steel-plastic composite sheath has excellent moisture, resistant performance; PE bag
Fiber optic cables & connectors
Used for: Ducts and conduits Aerial lashed Direct burial (armored only) Applications requiring good ozone, moisture and weather resistance Characteristics: Operating temperature: 40óx to 70óxc (storage) â= 40óx to 70óxc (operating) Color description: Fibers: eia/tia 598a Jacket: black Product description: Buffer tube: gel filled thermoplastic Armor: corrugated steel (armored only) Jacket: polyethylene Specifications: Crush resistance (eia45541): 1000n/10mm Impact resistance (eia45525): 2000 impacts @ 1.6 nm Tensile strength (short): 1500n Min.Ben radius, installation: 20x cable o.D. Min.Ben radius, long term: 15x cable o.D. Max.Weight: 15.5kg / 100m Other: Glass type: singlemode enhanced Operating wavelength (nm): 1310/1550 Max attenuation (db/km): 0.35/0.22 100 mbit fast ethernet min.Link length (meters s/l): /5000 1 gigabit ethernet min.Link length (meters s/l): /5000 10 gigabit ethernet min.Link length (meters s/l): /10000 Legend: "max attenuation" for microloose tube cables "s/l" short wavelength (850 nm) / long wavelength (1310 nm) "singlemode enhanced" low water peak singlemode compiles with itu g.652.C/d Weight:150kg per reel 400m/reel
Fiber optic splitters and couplers are used to split or combine optical signals in various kinds of networks Common applications of splitters and coupler are: system monitoring, fiber to the home, network redundancy, laser splitting Features: Single and multiples mode are available Industry standard and custom housing available Variety of connectors available 1 x 2, 1 x 4 and 1 x n custom couplers configurations available Low insertion loss Environmentally stable Specifications: Operation wavelength: 850nm or 1,310nm or 1,550nm, others on request Thermal stability: í_0.1dB over -10 to 85íµ Operating temperature: -10 to 85íµ/-20 to 70íµ/-20 to 70íµ Applications: Optical communication system Optical testing system Optical fiber sensor Optical power distributor
Feather: Low insertion loss High return loss High stability and reliability Customer design available Applications: Collimator Splitter Awg Wdm Isolator Active device As per customers' requirement
Optic fiber adapter - LC are all plastic housing; There are simplex LC adapter and duplex LC adapter, usually duplex LC fiber adapter are with SC footprint. The LC fiber adapter colors are same as SC fiber optic adapter: Blue for single mode PC, beige for multi mode PC and green for single mode APC. LC fiber optic adapter are with bronze sleeve for multimode and zircon sleeve for single mode. Features: 1. Standard metal one-piece body, good interchangeability 2. Precision ceramic sleeve, low insertion loss 1. Applicable standard: YD/T826, YD/T896, IEC61754-13 Applications: 1. Optical fiber communication networks 2. Optical CATV 3. Instruments and meters
Mfoc íªs sm and mm attenuators can be applied to adjust the power levels of signals in optical communications at the output of light sources, e/o converters and for testing the linearity or dynamic range of optical power meters.
1> Long distance and local light transmission network 2> Data Transmission network, various kinds of testing and self-control system 3> Realizes connection of transmission of fiber optical 4> Simplex and duplex patch cords available 5> multimode and singlemode optional 6> Single mode fiber :8/125,8.3/125,8.7/125,9/125 um Multimode fiber :50/125 ,62.5/125 um 7> Connector: ST/SC/FC/LC/DIN/MTRJ/ D4/MU/E2000/SMA optional 8> made by advanced ceramic sleeve 9> PC, UPC, APC polishing cartons
1> Long distance and local light transmission network 2> Data Transmission network, various kinds of testing and self-control system 3> Realizes connection of transmission of fiber optical 4> Simplex and duplex patch cords available 5> multimode and singlemode optional 6> Single mode fiber :8/125,8.3/125,8.7/125,9/125 um Multimode fiber :50/125 ,62.5/125 um 7> Connector: ST/SC/FC/LC/DIN/MTRJ/ D4/MU/E2000/SMA optional 8> made by advanced ceramic sleeve 9> PC, UPC, APC polishing
Optical fiber couplers 1. Input / output connector: fc/pc; fc/apc; lc/pc; mu/pc; sc/pc; sc/apc 2. Fiber length: 1: 1 m; 1.5: 1.5 m (customized) 3. Fiber type: 2: bare fiber, 9: 0.9mm loose tube, 3.0: 3.0mm cable 4. Coupling ratio: 01: 1: 99, 02: 2: 98, 50: 50: 50 5. Central wavelength: 13: 1310nm, 15: 1550nm 6. Port: 12: 1*2, 22: 2*2 7. Grade: p or a.
The product includes: optical fiber, loose tube, fiber compound, cable core, strengthened steel wire, water blocking tape, steel-composite belt, sheath with Kevlar. Characteristics of technic: damp proof, Aerial ground Characteristics of the product: Optical fiber coating loose tube, fill in fiber compound, Strengthened steel wire in the middle, tube gasket around steel wire as SE intertwist, cable fiber fill in cable core, and then coating water blocking tape, double-faced PE outer jacket Best SE interwist product optical fiber away from drawing and press. Ensure the machine of optical fiber, environment function adapt damp-dry waterblocking fiber, dependable waterproof function, avoid shift, high camber, damp proof, high bulletproof.
Widely used in the city and country cable network The data and graph transfer system, the catv wired tv series The direct and branch connection of the indoor cable, which acts as pigtail storage and connector protection It is made of cold-rolled steel sheets by electrostatic plastic spraying And has proper structure and neatly-looking We can fix the cable by strengthening core in the terminal box, and its ports can be replaced according to the practical engineering requirements.
Optic fiber patch cord 1) Fiber mode: single mode 2) Type: SC/UPC 3) Fiber cable external diameter:3.0mm,2.0mm,0.9mm 4) Standard length: 1m, 2m, 3m, 5m ,10m (or upon request) 5) Jacket color: yellow, orange (or upon request) 6) Insertion loss: 50 DB repeatability :
Performance indexes: Insertion loss 0.1db Return loss upc 50db Repeatability 0.1db Plugging times 1000 Operating wavelength 1310nm, 1550nm Operating temperature 40 70 Storage temperature 40+ 80 Features: Standards of iec, bellcore Small volume, high density wiring Upc end-face finishing Low insertion loss High return loss Applications: Communication networks Device termination Optical fiber test and measurement system Lan Industry and military applications