FOB PRICE LIST INCLUDED IN IMAGES 0W16 PAO SP 0W20 PAO SP Dexos 1 5W20 PAO SP 5W40 PAO SP 5W30 PAO SP Dexos 1 5W30 SP Dexos 1 10W30 SP 10W40 SP 10W40 Ci-4/SL CVTF Multi ATF MVF Multi ATF Dexron 6 ATF Dexron 3 75W80 GL-4 75W90 GL-4
FOB Price List Included in Images 15W40 Ci-4/SL 20W50 Ci-4/SL 20W50 SN 20W50 SL/CF SAE 50 CF/SF 80W90 GL-4 SAE 90 GL-4 SAE 140 GL-4 Hydraulic HY-68 ATF Type A
Lubricants, greases, base oil sn80, sn150, sn500.
FOB $250/MT MOQ 22MT Our used engine oil is 100% from vehicles workshop, and that is the reason is higher quality as compared to a supplier who mixed vehicles and factory used engine oil, and that is the reason we have max ability to supply only 2000 mt per month, as we try to keep the quality at the highest in its grade. The contract specs are as below, however in reality it's better as you can see in our latest lab test result in the attached picture. 1) Water : +/- 2% 2) Gross calorific Value : Min 10 000 Kcal 3) Sulfur content : Max 0.
Our used engine oil is 100% from vehicles workshop, and that is the reason is higher quality as compared to a supplier who mixed vehicles and factory used engine oil, and that is the reason we have max ability to supply only 2000 mt per month, as we try to keep the quality at the highest in its grade. The contract specs are as below, however in reality it's better as you can see in our latest lab test result in the attached picture. MOQ 22MT 1) Water : +/- 2% 2) Gross calorific Value : Min 10 000 Kcal 3) Sulfur content : Max 0.
Vessel Oil lubrication stern shaft sealing apparatus This series can be used as sealing means ocean transport vessels , work boats , military vessels and inland waterway vessels auxiliary oil-lubricated stern shaft seal . Applicable reference axis for the ship loaded draft < 20 m , stern bush circumferential speed
Automotive Gas Oil (AGO)
Transformer Oil is highly purified non-inhibited high performance mineral oil of Class 1 category of electrical insulation oils, confirming to IS 335:1993 It is use to insulate and cool transformer coil and to quench� electric� arcs� that� form between� contacts� of� switchgears,� circuit� breakers� and� rheostats� using� mineral insulating oil. BENEFITS High insulating capacity. Effective cooling and heat dissipation due to low viscosity. Minimum risk of fire due to very high flash point. High demtilsibility to ensure good separation of water in case of accidental pollution. No impurities e.g. water, dissolved gases suspended solids, etc.. Excellent oxidation stability. Minimum consumption of product due to low volatility at operating temperatures.
Slack Wax, minimally refined paraffinic wax obtained from the dewaxing process of base oil lubricants. It is used in a wide range of applications, including as a blending component in the production of paraffin waxes, as a waterproofing agent, and in the manufacture of candles, rust protective products, and board sizing.
Lubricants oil
Solest 68 is a formulated ISO VG68 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 68 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Soles lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Rotary, Centrifugal, Scroll Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 68, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 68 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 220 is a formulated ISO VG220 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 220 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 220, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 220 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 220 is a formulated ISO VG220 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 220 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 220, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Soles 220 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 180 is a formulated VG180 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 180 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. This grade offers excellent resistance to dilution in HFC refrigerants. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPIs laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 180, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Soles 180 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 180 is a formulated VG180 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 180 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. This grade offers excellent resistance to dilution in HFC refrigerants. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 180, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 180 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 120 is a formulated VG120 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 120 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 120, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 120 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 120 is a formulated VG120 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 120 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 120, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 120 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Lenoil refrigeration fluids are a unique blend of synthetic and semisynthetic basestocks, designed to give optimum performance in a variety of refrigeration systems. In addition to their outstanding stability with R-12 and R-22, the Lenoil fluids also contain a high degree of compatibility with these refrigerants, making them suitable for use at low temperatures where conventional mineral oil-based products often fail. Applications and Compressor Type R12 CFC Systems R22 HCFC Refrigeration R717 Ammonia Refrigeration Features and Benefits Oxidatively stable Longer system life Low carry-over Improves evaporator efficiency Corrosion protection Enhanced system reliability and reduced downtime Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up"
CPI-4628-68 is formulated with high quality synthetic polyalphaolefi n (PAO) basestock, combined with our patented seal swell technology. This lubricant features enhanced oxidation stability and a low pour point, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. Our patented seal swell technology minimized ammonia leaks due to poor elastomer performance. CPI-4628-68 is particularly suited for use in ammonia compressors with evaporator temps below -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Patented seal swell technology Minimize ammonia leaks Mineral oil compatible Easier change-over Oxidatively stable Longer system life Low carry-over Improves evaporator efficiency Corrosion protection Enhanced system reliability and reduced downtime Very low pour point Reduced efficiency loss and easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40 C, cSt ASTM D445 59.1 Viscosity @ 100 C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 131 Density, g/mL, 20 C ASTM D4052 0.84 Pour Point ( C) ASTM D97 -54 Flash Point, C.O.C., ( C) ASTM D92 266 Fire Point, C.O.C., ( C) ASTM D92 282
CPI -1009-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40 C, cSt ASTM D445 69 Viscosity @ 100 C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20 C ASTM D4052 0.88 Pour Point ( C) ASTM D97 -39 Flash Point, C.O.C., ( C) ASTM D92 226 Fire Point, C.O.C., ( C) ASTM D92 246 "
