The wall mounted Lithium battery (LiFePO4 Battery) solutions are highly integrated, deep cycle backup power solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of the fashionable design, high energy, high power density, long service life, and easiness of installation and expansion. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
The wall mounted Lithium battery (LiFePO4 Battery) solutions are highly integrated, deep cycle backup power solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of the fashionable design, high energy, high power density, long service life, and easiness of installation and expansion. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
The 19 inches rack standard backup battery is based on Lithium iron phosphate battery, It has been designed to provide backup power for telecom equipment or energy storage system in household. It has excellent safety, high energy density, long lifetime, very nice temperature performance, green power newly of excellent safety and high reliability. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
Pet Resin: A type of polyester resin widely used in the production of plastic containers, bottles, and packaging. Material Composition: Pet resin stands for polyethylene terephthalate, a thermoplastic polymer. Clear and Transparent: Known for its clarity, making it suitable for see-through packaging. Lightweight: Pet resin is lightweight yet durable, making it an ideal choice for various applications. Food and Beverage Safe: Often used for food and beverage containers due to its non-toxic and safe properties. Recyclable: Pet resin is recyclable, contributing to sustainability and eco-friendly packaging. High Strength: Offers good mechanical strength, making it suitable for storing liquids and solids. Resistance to Moisture: Pet resin has low moisture absorption, maintaining product integrity. Versatile Applications: Used for water and soft drink bottles, food containers, cosmetic packaging, and more. Barrier Properties: Provides a barrier against oxygen, carbon dioxide, and moisture, preserving freshness. Clarity and Gloss: Pet resin maintains a glossy appearance and transparent quality. Production Efficiency: Easily molded into various shapes using injection molding or blow molding techniques. Environmental Impact: Recycling initiatives help reduce the environmental impact of pet resin usage. FDA Approved: Compliant with food and drug regulations, suitable for packaging consumable goods. Packaging Innovation: Pet resin allows for creative and functional packaging designs. Retail and Convenience: Commonly found in retail settings due to its versatility and attractive appearance. Sustainable Choices: Recyclable nature encourages manufacturers and consumers to opt for sustainable packaging solutions.
Cocoa Cake is rich in nutrients, protein & carbohydrates, has a strong natural cacao aroma and is commonly used in chocolate and beverage production. 1. Product Name: Natural Cocoa Cake 2. Ingredients: 100 % from cocoa bean 3. Intended Use: Raw material for cocoa powder. 4. Organoleptic Description: Appearance Kibbled Color Light Brown Taste Typical Cocoa, no off flavors Odor Rich Cocoa Aroma, no off flavors 5. Physical and Chemical Parameters Specification: Moisture % 5.0 max Fat Content % 10 -12 pH - 5 - 6 Lead (Pb) mg/kg 1.0 max Cadmium (Cd) mg/kg 0.5 max Mercury (Hg) mg/kg 0.03 max Tin (Sn) mg/kg 40.0 max Arsen (As) mg/kg 1.0 max 6. Microbiological Parameters Specification: Total Plate Count cfu/g 5000 max Yeast cfu/g 50 max Mould cfu/g 50 max Enterobacteriaceae /g Negative Salmonella /25 g Negative E.coli APM/g < 3 7. Standard: Based on SNI No. 01-7553-2009 8. Packaging: Multi-layer paper bags, food grade, with plastic polyethylene respiration in them. Nominal weight of 25 kg / net bag. 9. Optimum Storage Conditions: Store in a cool dry place away from strong odours, protected against water and heat. It is recommended to: Store in areas of low relative humidity, best under 60%. Store at relatively cool temperatures, preferably maximum 25C. Keep free from foreign odors such as coffee, tea, spices, chemicals etc. Transport temperatures should be ambient , recommended below 25C. 10. Shelf Life: Two years under recommended storage conditions.
Hot Selling 100% Sawdust Biomass Wood Pellets Available for Export Descriptions: Wood pellets are a renewable resource, the fuel that is already widely available in the world nowadays. The sawdust or wood shavings are compressed under great pressure and forced through holes. This is a hot process and the natural lignin in the sawdust/wood shavings melts and binds the dust together, holding the pellet in shape and giving it that characteristic sheen on the outside Economic efficiency: Wood pellets are extremely dense and can be produced with a low moisture content (below 10%) that allows them to be burned with a very high combustion efficiency. Their high density also permits compact storage and rational transport over long distances. Electricity generated from pellets in converted coal plants is almost the same cost as electricity generated from natural gas, diesel. Environmentally friendly: Wood pellets are a sustainable fuel that can deliver a significant reduction in net carbon emissions when compared with fossil fuels. Its production and use also bring additional environmental and social benefits. Using scopes: Biomass fuels replace fossil fuels in power plants, stoves, the boiler of textile, food, leather, animal feeding, dye industrial, and animal bedding.
Kiln Dried split firewood: 1. Descriptions: Kiln dried split firewood is a renewable resource, fuel that is already widely available in the world nowadays. The wood log is been split into smaller quantities. This is a hot process and the natural ligin in the wood shavings melts and binds the dust together, holding the wood in shape and giving it that characteristic seen on the outside. 2. Economic efficiency: Kiln dried split firewood are extremely dense and can be produced with a low moisture content (below 10%) that allows them to be burned with a very high combustion efficiency. Their high density also permits compact storage and rational transport over long distance. Electricity generated from kiln dried split firewood in converted coal plants is almost the same cost as electricity generated from natural gas, diesels. 3. Environmentally friendly: Kiln dried split firewood is a sustainable fuel that can deliver a significant reduction in net carbon emissions when compared with fossil fuels. Its production and use also brings additional environmental and social benefits. 4. Using scopes: Dried kiln split firewood replaces fossil fuels in power plants, stoves, boiler of textile, food, leather, animal feeding, dye industrials and animal bedding.
Lithium iron phosphate battery is a kind of lithium ion battery that uses lithium iron phosphate (LiFePO4) as the positive electrode material and carbon as the negative electrode material. It has the advantages of high working voltage, high energy density, long cycle life, good safety performance, low self-discharge rate and no memory effect. Pustun lithium iron phosphate battery is your best power choice for energy storage system of solar street light. This LFP series battery is specifically designed for solar street light application, which has more than 10 years service life; LFP series batteries are the best choice for the durable, safe, environment-friendly energy solution and they can be customized according to your requirement, such as dimension, voltage, capacity of battery. With an increased lifespan, this battery can save you much cost against frequent battery replacement. The working life of lithium battery especially under the outdoor high temperature environment is five times longer than the traditional lead acid battery.
Lithium iron phosphate battery is a kind of lithium ion battery that uses lithium iron phosphate (LiFePO4) as the positive electrode material and carbon as the negative electrode material. It has the advantages of high working voltage, high energy density, long cycle life, good safety performance, low self-discharge rate and no memory effect. Pustun lithium iron phosphate battery is your best power choice for energy storage system of solar street light. This LFP series battery is specifically designed for solar street light application, which has more than 10 years service life; LFP series batteries are the best choice for the durable, safe, environment-friendly energy solution and they can be customized according to your requirement, such as dimension, voltage, capacity of battery. With an increased lifespan, this battery can save you much cost against frequent battery replacement. The working life of lithium battery especially under the outdoor high temperature environment is five times longer than the traditional lead acid battery.
.Fix carbon 95% Calcined anthracite coal for sale Anthracite Filter Media is thoroughly selected from anthracite which yields the highest percentage of carbon. It is then hydraulically classified to reduce mineral matter and ash to a minimum, and finally screened and washed to ensure suitability for filtration purposes. Anthracite filter coal or Anthrafilt is commonly used as sub-fill and as a component of multi-media filters. Anthracite filter media is a durable media with long life and a wide temperature range. It contains no silica to interfere in the production of ultra pure water. Anthracite promotes higher service flow rates and longer filter runs with less head loss than single media filter beds. Backwash rates are reduced as well. Low uniformity coefficient anthracite filter media extends the life of your filter before the media must be changed out. Higher service flows and longer filter runs than equivalent sand filters. â?¢ Unique density allows Anthracite to be combined with other filtration media in multi-media filters. â?¢ Lower uniformity coefficient has less oversized and undersized particles resulting in a highly uniformed bed. â?¢ Due to its medium density, Anthracite can be used in multi-media bed filters providing a unique pre-filtration layer. Anthracite coal filter media Application Anthracite Filter Media is widely used in the process of water quality treatment before and after the production of chemical, metallurgical, thermoelectric, pharmaceutical, papermaking, printing and dyeing, food and so on.
"Diesel D6 virgin oil" is not a standard term in the oil industry. However, based on common industry terminology and understanding, it seems you might be referring to a specific type of diesel fuel. Here's a general description that could apply: Diesel D6 is typically classified under the category of middle distillates, which are refined products derived from crude oil. It is a specific grade of diesel fuel used primarily for automotive engines and industrial applications. The term "virgin oil" is not commonly used in this context; instead, "virgin" could imply that the diesel fuel is of high quality and meets certain specifications without being mixed or blended with lower-grade fuels. Key characteristics of Diesel D6 may include: High Energy Density: Diesel D6 is known for its high energy content per volume, making it efficient for use in diesel engines which are common in transportation (e.g., trucks, buses, trains) and industrial machinery. Low Sulfur Content: Modern regulations often require diesel fuels like D6 to have low sulfur content to reduce emissions and comply with environmental standards. Suitable for Various Climates: It is formulated to perform well in a range of temperatures and conditions, ensuring reliable operation in both cold and warm climates. Industrial and Automotive Use: Besides transportation, Diesel D6 is used in various industrial applications where a reliable and efficient fuel source is needed. For oil exporters, Diesel D6 represents a valuable product that can be sold to domestic and international markets where there is demand for high-quality diesel fuel. Exporting Diesel D6 requires compliance with international standards and specifications to ensure it meets the requirements of customers and regulatory authorities in the receiving countries. Origin: Kazakhstan / Russia.
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - All Model fitted to Mechanical seal. specification Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 18 Mtr. - Maximum Flow Rate : 4200 LPH - Maximum Suction Lift : 8 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Direction of Rotation : Single Phase, Clockwise from driving end - Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 material Of construction - Motor Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : SS-410 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : Brass Cooling Fan : Plastic
Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum
1. Characteristic: It is a white and colloidal micro-particle with its primary micro-particle from 5-40 nm and has obvious properties such as thixotropy, reinforcing, thickening and filling etc. and is insoluble in all kinds of solvents and liquids except hy-drofluoric acid and concentrated bases. 2. Specification: Q/SHG19-2008ItemIndex Product: LM200 Apparent: White solid colloidal micro-particle Specific surface area m2/g: 150�±15 PH value3.6~4.3 Heating loss weight % (m/m) â?¤1.0 Burning loss weight % (m/m) â?¤1.0 Apparent density g/Lâ?¤60 3. Uses: It is used widely in silicone rubber, construction sealant, coating, electron and electric, aerospace, medicine and medical material, resin processing, printing ink, pesticide and other industries. LM-150: used widely in silicone acid rubber, sulfurized silicone rubber in ambient temperature (low water content), silicone neutral rubber. LM-200: used widely in sealing ring, sealing gasket, petroleum pipeline, insulator, tablet powdered preparation, artificial viscera, infusion tube, latex nipple and high quality oil ink. LM-300: used widely in resin thickener, thickness agent for synthetic lubricating ester, resin thixotropic agent for electronic component. LM-380: used widely in reinforcing agent for silicone rubber, medical silicone rubber for transparent artificial organs and artificial heart etc. 4. Packing: packed with multi-layer paper plastic compound bag with net weight of 5 kg or 10 kg, or packed by whole plastic seal for users having special demand on water content. 5. Store and transport: placed in vent and dry storehouse and prevented from humid, water, pressure and throwing during transport.
Sesame seeds are one of the oldest seeds known to mankind. Sesame Seeds have been enjoyed by humans since the dawn of civilization. Sesame is commonly known as til in India and is considered as one of the oldest seed having excellent nutritional value that adds a crunchy sensation and a unique flavor to a variety of food items. It is used in breads, candies, main dishes, as a garnish on pasta and vegetables, and for its oil content Sesame seeds contain many compounds and important nutrients that give the body a lot of health benefits, and moderation in consuming sesame is the key to obtaining its great benefits, with an amount of no more than two tablespoons of sesame seeds per day, Among the benefits of sesame, we mention the following: It reduces the risk of some diseases, and improves the conditions that a person suffers from, including high levels of cholesterol in the blood, osteoporosis, and high blood pressure. Maintains the health of red blood cells, because it contains B vitamins, and it also contains some minerals that contribute to the development and functions of red blood cells. It enhances metabolism and energy production, because it contains some important vitamins for that. It contains some important vitamins to maintain the strength of hair, muscles and bones. It contains monounsaturated fats in a large proportion, which can help reduce levels of low-density lipoprotein (LDL) cholesterol, which is called harmful cholesterol, when used instead of saturated fats, and thus it reduces the risk of heart disease and stroke
Shell charcoal is a form of charcoal made from crushed coconut shells and other marine animal shells. It is an excellent soil amendment and is known for its high nutrient content and ability to improve soil structure. Shell charcoal is an effective way to add organic matter to soil and improve soil fertility. It also helps to improve water retention and drainage, as well as providing a habitat for beneficial soil organisms. Shell charcoal can also help to suppress disease in plants and can be used as a natural pesticide. It has a very high carbon content and helps to reduce soil acidity, making it very beneficial for acid-loving plants. Features: Shell charcoal is a type of soil amendment that can be added to the garden to improve soil quality . It has a low ash content and produces a higher heat output than wood charcoal. Shell charcoal is slow-burning and produces fewer sparksShell charcoal is slow-burning and produces fewer sparks. Its light weight makes it easy to transport and store. It is made from high-quality coconut shells that are burned in a kiln with very little oxygen. It produces virtually no smoke and no odor. Suitable for : 1. Food Industry & Barbeque 2. Coconut Shell Charcoal for Golf Courses 3. Coconut Shell Charcoal used for Animal feed 4. Coconut Shell Charcoal Soap Physical Properties: Physical form : Solid oval pillow shapes Color: Black Odor: Varies from odorless to slight Briquette Average weight : 36-38g Boiling point : 4500 C(8132 F) Melting/Freezing point :3500C(6332 F) Bulk Gravity/Density :0.530-0.550 ton/m3 Fixed Carbon : 65-75%ASTM 1762 Ash : 3-10%
Product pictures Properties: PP has the advantages of excellent comprehensive properties, good chemical stability, good shape processing performance and relatively low cost. PP can adapt to a wider range of application requirements through modifying, copolymerization, grafting,blending, reinforced filling, transparency, filling, weather resistance. Commonly used reference for Pp grade (due to market factors and production schedule, the actual model may be different, please contact us for specific grade confirmation) Category Grade MFI Density Major Applications Homopolymer - Extrusion F103 3.3 0.9 BOPP Film Grade - General Purpose, Lamination & Metallizable films T30S 3.3 0.9 Raffia Tapes ,Woven Sacks for Packaging Fertilizers, Cement, Polymers, Carpet Backing ,FIBC etc. T103 3.3 0.9 Thermoformed Cups, Containers & Other disposable items F110 11 0.9 TQ and Cast Films for General Purpose Packaging etc. Homopolymer â?? Injection Molding M103 3 0.9 General Purpose Injection Molding M106 6 0.9 General Purpose Injection Molding M108 8 0.9 General Purpose Injection Molding M110 10 0.9 General Purpose Injection Molding, Furniture etc. Impact Copolymer â?? Injection Molding M304 3.5 0.9 Automotive Components, Crates, Pails, Furniture etc. M307 7 0.9 General Purpose Injection Molding M310 10 0.9 Battery Boxes M311T 10 0.9 Compounding, Automotive Components, Luggage and Industrial Components M312 12 0.9 Compounding, Industrial Components, Automotive Components, Luggage, Pails, Houseware, Sanitary Wares etc. M315 15 0.9 General Purpose Injection Molding M325 25.0 0.9 Compounding, Automotive Components, Houseware, Appliances parts, Extrusion Coating M340 40 0.9 Appliance & White Goods, Automotive component, Compounding,TWIM Random Copolymer â?? Blow Molding B202S 1.9 0.9 Bottle & Containers for Medical and Transparent Products (e.g. IV Fluid Bottles) etc B200 1.9 0.9 General Purpose Blow Molded & Thermoformed Items, Sheets for Files & Folders. M212S 12 0.9 High Clarity Containers, Household items,Injection Syringe, Laboratory products & ISBM Bottles
Falcon Premium 200 mm (8) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - SS-304 Grade investment casting bowl and SS-304 grade impeller in radial flow series - 20 Mtr. Head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting pad with carbon plate) to with stand axial thrust loads - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS Pumps are available Specification Direction of Rotation : Counter clockwise from driving end -1ph : Electrically Reversible -3ph - Power Range : 7.5 kW to 75 kW (10 HP to 100 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Thrust Load : 7.5 kW -30 kW -10000 lbs - Speed : 2880 RPM - Head Range : 12 Mtr. To 440 Mtr. - Discharge Range : 2400 LPM to 300 LPM - Outlet Size in Inch : 4.0" & 5.0" - Degree of Protection : IP 58 - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : Star Delta (SD) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
