REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25 CRUDE SUNFLOWER OIL SPECIFICATIONS CRUDE SUNFLOWER OIL SPECIFICATIONS TYPICAL VALUES SPECIFIC GRAVITY ( AT 20 C�°), G/CM�³ 0,918 0,923 REFRACTIVE INDEX ( AT 40 C�°) 1,461 1,468 SMOKE POINT, C�° MIN�±10C�° FLASH POINT, C�° MIN�±10C�° COLOUR RED ( ON LOVIBOND CELL ) CONSISTENCY LIQUID VISCOUS +20C�° ODOUR, TASTE SPECIFIC FOR THIS PRODUCT QUALITY AND FOOD SAFETY PARAMETER MAX PEROKSIDE VALUE, MEQ.O2/KG 15 MOISTURE AND VOLATILE SUBSTANCES, % 0,2 ACID VALUE, MG KOH/G 4,0 JODINE VALUE, GJ2/100G 118 - 141 INSOLUBLE IMPURITIES, % 0,05 SOAP CONTENT, % 0,005 SOAPONIFICATION VALUE, MG KOH/KG 188 - 194 UNSOAPONIFICATION MATTERS, % < 15 TYPICAL FATTY ACID COMPOSOTION % C 14:0 < 0,2 C 16:0 5,0 7,6 C 18:0 2,7 6,5 C 18:1 14,0 39,4 C 18:2 48,3 74,0 C 18:3 < 0,3 C 20:0 0,1 0,5 C 20:1 < 0,3 C 22:0 0,3 1,5
REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25 CRUDE SUNFLOWER OIL SPECIFICATIONS CRUDE SUNFLOWER OIL SPECIFICATIONS TYPICAL VALUES SPECIFIC GRAVITY ( AT 20 C�°), G/CM�³ 0,918 0,923 REFRACTIVE INDEX ( AT 40 C�°) 1,461 1,468 SMOKE POINT, C�° MIN�±10C�° FLASH POINT, C�° MIN�±10C�° COLOUR RED ( ON LOVIBOND CELL ) CONSISTENCY LIQUID VISCOUS +20C�° ODOUR, TASTE SPECIFIC FOR THIS PRODUCT QUALITY AND FOOD SAFETY PARAMETER MAX PEROKSIDE VALUE, MEQ.O2/KG 15 MOISTURE AND VOLATILE SUBSTANCES, % 0,2 ACID VALUE, MG KOH/G 4,0 JODINE VALUE, GJ2/100G 118 - 141 INSOLUBLE IMPURITIES, % 0,05 SOAP CONTENT, % 0,005 SOAPONIFICATION VALUE, MG KOH/KG 188 - 194 UNSOAPONIFICATION MATTERS, % < 15 TYPICAL FATTY ACID COMPOSOTION % C 14:0 < 0,2 C 16:0 5,0 7,6 C 18:0 2,7 6,5 C 18:1 14,0 39,4 C 18:2 48,3 74,0 C 18:3 < 0,3 C 20:0 0,1 0,5 C 20:1 < 0,3 C 22:0 0,3 1,5
REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25 CRUDE SUNFLOWER OIL SPECIFICATIONS CRUDE SUNFLOWER OIL SPECIFICATIONS TYPICAL VALUES SPECIFIC GRAVITY ( AT 20 C�°), G/CM�³ 0,918 0,923 REFRACTIVE INDEX ( AT 40 C�°) 1,461 1,468 SMOKE POINT, C�° MIN�±10C�° FLASH POINT, C�° MIN�±10C�° COLOUR RED ( ON LOVIBOND CELL ) CONSISTENCY LIQUID VISCOUS +20C�° ODOUR, TASTE SPECIFIC FOR THIS PRODUCT QUALITY AND FOOD SAFETY PARAMETER MAX PEROKSIDE VALUE, MEQ.O2/KG 15 MOISTURE AND VOLATILE SUBSTANCES, % 0,2 ACID VALUE, MG KOH/G 4,0 JODINE VALUE, GJ2/100G 118 - 141 INSOLUBLE IMPURITIES, % 0,05 SOAP CONTENT, % 0,005 SOAPONIFICATION VALUE, MG KOH/KG 188 - 194 UNSOAPONIFICATION MATTERS, % < 15 TYPICAL FATTY ACID COMPOSOTION % C 14:0 < 0,2 C 16:0 5,0 7,6 C 18:0 2,7 6,5 C 18:1 14,0 39,4 C 18:2 48,3 74,0 C 18:3 < 0,3 C 20:0 0,1 0,5 C 20:1 < 0,3 C 22:0 0,3 1,5
REFINED SUNFLOWER OIL SPECIFICATIONSREFINED SUNFLOWER OIL SPECIFICATIONSPHYSICAL PROPERTIES Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Refractive index: 1.465-1.475 at 40 deg. C Density: 0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste: Excellent Odor: None - not sensed CHEMICAL SPECIFICATIONS %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value: 190.32 koh/g. Of oil Iodine value: 134.13 (wijs-hanus method) Peroxide: 0.2 meq/KG. Of oil % soap: 0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids): 8-12 % unsaturated fat(-ty acids): 87-91 Feeding energy: 900kcal Iron: < 0.02 mg/lt FATTY ACID COMPOSITION C14:0: 0.06 C16:0: 5.77 C18:0: 4.1 C18:1: 27.3 C18:2: 59.2 C20:0: 0.27 C18:3: 0.25 CRUDE SUNFLOWER OIL SPECIFICATIONS CRUDE SUNFLOWER OIL SPECIFICATIONS TYPICAL VALUES SPECIFIC GRAVITY ( AT 20 C�°), G/CM�³ 0,918 0,923 REFRACTIVE INDEX ( AT 40 C�°) 1,461 1,468 SMOKE POINT, C�° MIN�±10C�° FLASH POINT, C�° MIN�±10C�° COLOUR RED ( ON LOVIBOND CELL ) CONSISTENCY LIQUID VISCOUS +20C�° ODOUR, TASTE SPECIFIC FOR THIS PRODUCT QUALITY AND FOOD SAFETY PARAMETER MAX PEROKSIDE VALUE, MEQ.O2/KG 15 MOISTURE AND VOLATILE SUBSTANCES, % 0,2 ACID VALUE, MG KOH/G 4,0 JODINE VALUE, GJ2/100G 118 - 141 INSOLUBLE IMPURITIES, % 0,05 SOAP CONTENT, % 0,005 SOAPONIFICATION VALUE, MG KOH/KG 188 - 194 UNSOAPONIFICATION MATTERS, % < 15 TYPICAL FATTY ACID COMPOSOTION % C 14:0 < 0,2 C 16:0 5,0 7,6 C 18:0 2,7 6,5 C 18:1 14,0 39,4 C 18:2 48,3 74,0 C 18:3 < 0,3 C 20:0 0,1 0,5 C 20:1 < 0,3 C 22:0 0,3 1,5
Medrop Absorbent cotton gauze B.P Specifications: A wide range of gauze roll that are hygienically made so that they are safe to use in various medical applications. Made from finest quality 100% cotton, bleached to white, these gauze ro ll can be provided with X-Ray detectable thread or Without. Roll of 4 folded fabric of different lengths. The gauze used is super hydrophilic in nature & conforms to global as well as Indian Standards. Ideal for dressing on big wound pockets and abscesses.With / withoutX-Ray detectable threats. . Available in Mesh quality â?? 19 X 15, 24 X 18 and 30 X 20, Cotton Yarn- 26S, 30S and 40S thread. Description Absorbent Gauze Roll Characteristics: Made from accomplished cotton yarn. Absorption rate faster (less than 10 seconds). Better tending capacity. Less allegiance to healing tissue. These Absorbent Gauze Roll are available in British Standard as well as United States Standard. Applications: High utility & lite. Easy to use. These are uniquely designed to make them perfect for all types of application.
Within the heartlands of the vibrant and verdant Southern Indian landscape, our renowned brand, 'GK Fresh Banana', orchestrates a symphony of precision and care in the curation of our export-bound bananas. Each fruit, meticulously handpicked and scrutinized by our dedicated team, originates from the sprawling banana plantations nestled amidst the undulating hills and valleys of Western Tamil Nadu The origin story of our bananas is a tale steeped in the embrace of nature's bounty and the wisdom of optimal cultivation practices. Enveloped by the breathtaking vistas of the Western Ghats, our farm stands as an oasis of growth, carefully chosen for its ideal climatic conditions. This idyllic setting serves as the canvas upon which our bananas flourish, consistently upholding the standards of uniformity, quality, and variety that define 'GK Fresh Banana'. Packing : Bottom 5 Ply And Top 3 Ply Strong Carton Box Loadability : 1x40feet Container Can Loadable 1540 Carton Box(20mt) Delivery Time : 10 To 15 Days From Date Of Advance Payment Received Port of Loading : Tuticorin Port Supply Capacity : Weekly 10x40feet Containers Can be Loadable Specifications of Banana Colour ; Green Length Minimum 18 cm- 25 cm( pulp to tip) Net weight : 13-13.5 Kg per carton box Supply Ability : Per Day 2�?40 feet containers Temperature : In refer 13.5 degree Maturity : 40 to 46 (depend upon the age, size & length) Hands ; 4,5,6 hands 85% & 7 hands 15% Gross weight : 14.1 kg per box Box Quality Bottom 5ply and Top 3ply strong Carton Box Capacity 10 containers(40â?²Ft reefer) /Weekly These containers serve as guardians of freshness and safety, safeguarding the journey of our bananas from our meticulously tended plantation to the tables of discerning customers worldwide. Thus, from the sun-kissed plantations of Southern India to the farthest reaches across the globe, 'GK Fresh Banana' represents a legacy of excellence, sustainability, and unmatched quality in every single fruit we deliver
Our Company is certified from FSSAI (Food Safety and Standards Authority of India), APEDA (Agricultural and Processed Food Products Export Development Authority of India) having RCMC and having certified IEC which allows us to executes the services at par with International standards. All our products are based on Best Value for Money and we are always looking to expand the services with Potential Buyers all over. We are one of the most recognized Export/Import companies to export our products over the globe. Sr # Product 1 Spinach 2 Ladies Finger 3 Drumsticks 4 Curry leaves 5 Bottle Gourd 6 Bitter Gourd 7 Sponge Gourd 8 Snake Gourd 9 French Beans 10 Cluster Beans (Gavar) 11 Cauliflower /flower 12 Cabbage 13 Coriander 14 Mint 15 Arugula 16 Spring Onion 17 Parsely 18 Asparagus 19 Broccoli 20 Lettuce 21 Celery 22 Bell Pepper (Red, Green,Yellow) 23 Carrot 24 Red Carrot 25 Radish 26 Beet Root 27 Egg Plant 28 Banana Flower 29 Banana Stem 30 Tinly 31 Yellow Cucumber 32 Green Cucumber 33 Chau Chau 35 Gooseberry 36 Bullet Chilli 37 Chilli 38 Tomato 39 Red Capsicum 40 Mushroom Button 41 Fresh Peas 42 Bamboo Shoots
We export high-quality vegetable oils and fats, as we supply all types of edible cooking vegetable oils; We supply both Refined and Crude Sunflower oil, Soybean oil, Palm oil, Rapeseed oil, Palm oil Sunflower oil, Soya oil, Corn oil, Rapeseed oil, Olive oil, Palm oil, Coconut oil, Jatrapho oil, Rice bran oil edible oil, Vegetable oil germ oil, Rbd Palm Olein. Our advanced quality ranges of Refined Sunflower are widely used for cooking applications and are supplied in secure packs. These are available in various quantity and are supplied on wide market scale. We ensure secure, reliable, advanced quality crude and Refined Sunflower oil for sale PRODUCT SPECIFICATIONS Sunflower Oil is manufactured according to a process that should confer to the finished product the following specifications: Specific Density (At 20�° C) Range 0,915 â?? 0,923 typical 0,921 Refractive Index (At 40�° C) 1,474 â?? 1,476 Acidity Mg KOH % Gm Oil Max Range 1,0 -2,0 Typical 1,6 Peroxide Value Mmol/Kg Oil Max 7,5 Color Value Iodine Mg Max 15 Iodine Value (WIJS) 127 Moisture & Volatile % Max 0,09 â?? 0,13 Saponifcation Value Mg KHO/Gm 185 â?? 194 Unsaponificable % 1, 3 â?? 1, 5 Phosphorus Containing Matter (P205) 0,1 Non - Fatty Impurities % Max Range 0,10 â?? 0,02 Typical 0,02 Coloring Materials Absent Artificial Flavors Absent Anti Oxidant Absent Preservative Agent Absent Soap Content Absent Anti Foaming Agent Absent Anti Crystallization Agent Absent Acidity, Free Fatty Acid 0,8 â?? 1,5 (FFA) % Refractive Index 1,474 - 1,475 Packaging Plastic Bottle, Bulk, Can (Tinned), Drum, Flexytank In transparent PET bottle----1L, 2L, 3L, 4L and 5L (With Handle). In jerrycan---- 5L, 10L, 20L, 25L and 220L. In metal tin----16L, 14kg (with or without carton), 15L /15 kg, 16 kg (with or without carton), 17L/17kg, 18L /18 kg, 20L metal tin with bung hole (Round or Square) In metal drum---- 200L In flexytank---- 20MT/20FCL
V7 Borewell Submersible Pumpset Falcon Premium 175 mm (7) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Cast iron casting bowl and SS-410 grade impeller in mix flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps Specification - Method of Starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW - Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Speed : 2880 RPM - Head Range : 18 Mtr. To 650 Mtr. - Discharge Range : 1860 LPM to 55 LPM - Outlet Size in Inch : 2.0 , 2.5 , 3.0 & 4.0 - Degree of Protection : IP 58 - Direction of Rotation : Electrically Reversible -3ph - Thrust Load : 11.2 kW -37.3 kW -8000 lbs - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Introducing the finest quality leather products! We offer a wide range of premium leather options to satisfy your needs. Our leather is available in sizes of 3.5 to 5.5 square feet and 4.0 to 6.0 square feet, with a stunning semi-chrome finish. You can choose from an array of colors tailored to your preferences. With our selection options, ABC comprises 80 percent, while CD takes up 20 percent, ensuring the perfect leather for your requirements. The substance ranges from 0.7mm to 1.0mm, providing both durability and flexibility. Experience luxury with our Goat Garment Suede. Similar to our Shoe Suede, it offers a semi-chrome finish, custom colors, and ABC/CD selection preferences. This lightweight suede comes in substance sizes of 0.4mm and 0.5mm, ideal for garment applications. For a softer touch, our Lamb Suede is a perfect choice. Available in various sizes and a semi-chrome finish, it offers a customizable color palette. With substance options of 0.7mm, 0.9mm, and 0.9mm to 1.0mm, our Lamb Suede guarantees a refined look. Discover the durability of our Cow Suede, available in sizes of 12 square feet and beyond. Customize the finish, colors, selection, and substance to suit your preferences, making it perfect for a wide range of applications. Looking for something unique? Try our Cow & Goat Foil Print Leather, combining the best of both worlds. With custom sizes, colors, prints, and selection preferences, this leather is a statement in itself. The goat leather ranges from 0.7mm to 0.9mm, while the cow leather offers substance options of 1.4mm to 1.6mm. For a rugged and distinctive look, our Cow Crazy Horse Leather is unparalleled. With sizes of 16 square feet and above, custom colors, and selection options, this leather exudes character. The substance ranges from 1.4mm to 1.6mm, providing strength and style. Add a touch of sophistication with our Cow Crazy Horse Print Leather. Available in sizes of 14 square feet and larger, this leather offers a custom color palette, prints, and selection preferences. The substance options range from 1.2mm to 1.6mm, ensuring durability without compromising elegance. Experience the smoothness of our Cow & Sheep Nappa collection. With various types, including Cow Garment Nappa, Sheep Shoe Nappa, Sheep Garment Nappa, and Sheep Glove Nappa, you can tailor the size, colors, selection, and substance to suit your specific needs. For a luxurious and distinctive option, try our Cow Floater Leather. With sizes starting from 18 square feet, you can customize the colors and selection to match your vision. The substance ranges from 1.4mm to 1.6mm, offering both strength and style. Make a lasting impression with our Cow Embossed Print Leather. Available in sizes of 14 square feet and beyond, this leather allows you to choose custom colors, prints, and selection preferences. The substance options range from 1.4mm to 1.6mm, ensuring a textured and unique finish.
1.Advanced features ensure safety for nurses and patients; 2.Apply to syringe 1ml-60ml luer lock or slip lock.
** WAREHOUSE CLEARANCE - STOCK IS OTG IN CHINA READY TO SHIP IMMEDIATLEY** Safety Needle 23G 1" (universal) Safety Needle 23G 1.5" (universal) Safety Needle 25G 1" (universal) Safety Needle 25G 1.5" (universal) Numedico Technologies is the manufacturer of a range of traditional | Standard syringe supplies. We use high-quality cannulas for increased patient comfort. Numedicos Everyday standard safety needles are available in a range of sizes and we can deliver worldwide. Available as Safety Needle 23G 1" (universal) Safety Needle 23G 1.5" (universal) Safety Needle 25G 1" (universal) Safety Needle 25G 1.5" (universal) Latex-free Blister paper packed | EO Sterilization Certification: CE Marked , FDA Approved, US 510k approved , International ISO standards 13485, ISO 7864-4
Material- Laminated MDF Shape- Round, Square, Oval, Hexa etc (can be customized) Color- Wood textures, solid colors, Stone texture, customize photo print, etc Movement- Step Size- from 10-inch to 18-inch diameter Thickness of Dial- 5mm Needles- Metal Color of needles- Customise available Packaging- Box per clock Customized Branding of packaging available
HEALTH GAIN FACTOR: White tea has antioxidant and anti-aging properties which help in maintaining good health and healthy skin. It protects skin from the harmful effects of UV light. FEEL GOOD FACTOR: This is refreshing, soft and airy on the palate. This exquisite tea, perfect to enjoy in multiple infusions. QUALITY FACTOR: Silver Needle from Darjeeling is one of the rare tea in the world, gathered only for a few days in early spring, the perfection is evident in the pale ivory coloured liquor. Our products and production facilities are certified by major certification agencies including accreditation from the Food Safety and Standards Authority of India� ISO22000-2018, ISO9001-2015, GMP,MSME, STARTUPINDIA, FSSAI, TEA BOARD and APEDA. Ingredients Silver Needled White Tea
HEALTH GAIN FACTOR: White tea has antioxidant and anti-aging properties which help in maintaining good health and healthy skin. It protects skin from the harmful effects of UV light. FEEL GOOD FACTOR: This is refreshing, soft and airy on the palate. This exquisite tea, perfect to enjoy in multiple infusions. QUALITY FACTOR: Silver Needle from Darjeeling is one of the rare tea in the world, gathered only for a few days in early spring, the perfection is evident in the pale ivory coloured liquor. Our products and production facilities are certified by major certification agencies including accreditation from the Food Safety and Standards Authority of India� ISO22000-2018, ISO9001-2015, GMP,MSME, STARTUPINDIA, FSSAI, TEA BOARD and APEDA. Ingredients Silver Needled White Tea
HEALTH GAIN FACTOR: White tea has antioxidant and anti-aging properties which help in maintaining good health and healthy skin. It protects skin from the harmful effects of UV light. FEEL GOOD FACTOR: This is refreshing, soft and airy on the palate. This exquisite tea, perfect to enjoy in multiple infusions. QUALITY FACTOR: Silver Needle from Darjeeling is one of the rare tea in the world, gathered only for a few days in early spring, the perfection is evident in the pale ivory coloured liquor. Our products and production facilities are certified by major certification agencies including accreditation from the Food Safety and Standards Authority of India� ISO22000-2018, ISO9001-2015, GMP,MSME, STARTUPINDIA, FSSAI, TEA BOARD and APEDA. Ingredients Silver Needled White Tea
White Tea is taken from the youngest tea leaves which are still rolled up, resembling a bud, these tea leaves are harvested and dried where it turns to a white and silver colored from the fuzz that surround the leaves. White Tea has a needle like shape which is why it's often called silver needle. White Tea is known for its high antioxidant level compared to other teas, it also has numerous other health benefits, as in lowering cholesterol, protecting the heart, antimicrobial and antivirus properties, preventing diabetes melitus, etc. White Tea produces a light yellow colored tea which can be enjoyed whether hot or cold without affecting its antioxidant properties. The tea leaf products we sell are produced from a clean production process so that quality dry tea leaf products are produced. We accept Maklon/Toll Manufacturing where we produce requested products, so the buyers or brand owners can sell the final outcome of the tea. Price listed is for each kilogram.
We Supply Used cooking oil for Bio diesel and others as below : USED COOKING OIL SPECIFICATION Free fatty acids 3 % Max M.I.U(Moisture and Impurities) 0.1 % max Saponification value: 18185-1955-195 Iodine value: 120 Titre C (melting point) 13.75 'C Specific Gravity @ 25 C 0.915 Density (kg/m3) 920 Flashpoint by P.-M. (Degree C) 220 Calorific Value (kj/kg) 36, 000 Kinematic Viscosity (40 deg.C) (mm2/s) Carbon Residue (mass-%) 0.4 Sulphur Content (mg/kg) 16 Contamination (mg/kg) 24 Acid Value (mg KOH)/g) 7.0 Oxidation Stability (110 deg.C)(h) 5.0 (min) Phosphorus Content (mg/kg) 15 Ash Content (mass %) 0.01 Packaging & delivery TRANSPERENT PET BOTTLES * 1L, 3 L,5 Liters and in bulk PET Transparent Bottle (With Handle). JERRYCANS * 5 L, 10 L, 20 L, 25 L and 220 Liters Jerry can. METAL TIN * 16 L, 14 kg (with or without carton), 15 L / 15 kg, 16 kg (with or without carton 17 L / 17 kg, 18 L / 18 kg, 20L Metal Tin with Bung Hole (Round or Square) and 211 Liters Metal Drum. FLEXI TANK 20 MT Flexi Tank.
Product Description Texol Ultra S SAE 10W40 is an advanced, semi-syn- thetic engine oil meeting the requirements of almost all the engines in passenger cars running on multiple fuels like Gasoline, Bio Diesel, Gasoline-ethanol Mix, LPG & LNG. It is mainly suited for turbo charged, multi valve and direct injection engines, based on OEM recommendation. Applications They are semi-synthetic engine oils designed for use in modern gasoline engines, diesel engines (without partic- ulate filters) and gas engines of model year 2012 and later. And it is also suitable for use with bio diesel and Gasoline Ethanol blends. Features and Benefits As a Semi-synthetic engine oil, it provides excellent oxidation stability and low temperature flow properties. Protection of three-way catalyst poisoning by reducing the volatility of the phosphorus in the lubricant. Helps to protect the engine throughout the oil drain interval helps to protect high performance engines from power and performance robbing deposits. Specifications and Approvals API-SN Health and Safety Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.
Texol Motorcycle Oil 4T SAE 10W40 API SN JASO MA-2 - Synthetic - 1 Ltr Product Description Texol Motor Cycle Oil 4T SAE 10W40 API SN JASO MA-2 is an advanced synthetic engine oil meeting the requirements of almost all the engines in passenger cars running on multiple fuels like Gasoline, Diesel, Bio Diesel, Gasoline-ethanol Mix, LPG & NG. It is mainly suited for turbo charged, multi valve and direct injection engines. As the oil also meets JASO MA-2 specification, the additives are designed for providing outstanding performance in motor cycles running on 4 stroke engines and as recommended by the OEMs. Applications The oil is a semi-synthetic engine oil designed for use in modern gasoline engines, diesel engines (without partic-ulate filters) and gas engines of model year 2012 and later. And it is also suitable for use with bio diesel and Gasoline â?? Ethanol blends. In Motor cycles, it is used in high RPM 4 stroke engines running in all terrains. Features and Benefits As synthetic engine oil, it provides excellent oxidation stability, low temperature flow properties. Smooth & responsive gear changes Clean Engines. Friction characteristics provide for extra grip. Excellent protection from engine wear besides prolonging oil drain interval. Specifications and Approvals API-SN JASO MA-2 Health and Safety Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.