Readymade Garments Stock Lot Bangladeshi Stock Shipment cancel overstock surplus overruns stock lot 100% Export Quality Hoodies, T-shirt, Sweatshirt, sweatpants, Polo Shirt, Tank tops, Leggings, gym wear, Cargo Shorts, Cargo, Baby dress set, kids Boys Girls dress set and all kids of Women's & Men's knit item. Product Name : All famous Brande surplus overstock T-shirt Material: Cotton, Lycra cotton, Spandex, Polyester Fabric Type: Knitting dying or yarn dye fabrics Fabric Construction : 1. 100 % Cotton 2. 95 % Cotton, 5 % Spandex (Spandex) 3. 65% cotton 35% polyester (CVC) 4. 100% polyester (Polyester ) 5. 95% bamboo, 5% spandex (Bamboo &Spandex ) 6. 65% bamboo 30% cotton 5% spandex ( Bamboo, Cotton &Spandex Collar Type : O Neck, V neck, Polo collar Fabric Weight : 140gsm , 150gsm , 160gsm , 180gsm, 200gsm Color: Buyer can choose the color from Pantone color Chart or Yarn Dyed Possible as per buyer requirement or instant Market fabric Color available in the market Production Time : 7 - 10 working days with available market Fabric .( 300 - 1000 Pieces) 20 -30 days for Bulk production >= 5000 pieces Shipment : For small Quantity DHL,TNT, Aramex ,Express delivery and Bulk order sea vessel Payment : Western Union, MoneyGram or T/T Only and bulk production irrevocable L/C at Sigh
Readymade Garments Stock Lot Bangladeshi Stock Shipment cancel overstock surplus overruns stock lot 100% Export Quality Hoodies, T-shirt, Sweatshirt, sweatpants, Polo Shirt, Tank tops, Leggings, gym wear, Cargo Shorts, Cargo, Baby dress set, kids Boys Girls dress set and all kids of Women's & Men's knit item. Product Name : All famous Brande surplus overstock T-shirt Material: Cotton, Lycra cotton, Spandex, Polyester Fabric Type: Knitting dying or yarn dye fabrics Fabric Construction : 1. 100 % Cotton 2. 95 % Cotton, 5 % Spandex (Spandex) 3. 65% cotton 35% polyester (CVC) 4. 100% polyester (Polyester ) 5. 95% bamboo, 5% spandex (Bamboo &Spandex ) 6. 65% bamboo 30% cotton 5% spandex ( Bamboo, Cotton &Spandex Collar Type : O Neck, V neck, Polo collar Fabric Weight : 140gsm , 150gsm , 160gsm , 180gsm, 200gsm Color: Buyer can choose the color from Pantone color Chart or Yarn Dyed Possible as per buyer requirement or instant Market fabric Color available in the market Production Time : 7 - 10 working days with available market Fabric .( 300 - 1000 Pieces) 20 -30 days for Bulk production >= 5000 pieces Shipment : For small Quantity DHL,TNT, Aramex ,Express delivery and Bulk order sea vessel Payment : Western Union, MoneyGram or T/T Only and bulk production irrevocable L/C at Sigh
JIC fittings are made in accordance to SAE J514 and ISO 8434-2 standard The JIC body is machined with a 37-degree flared seating surface. This fitting is designed to use in many different sector and especially in the high pressure industry. JIC Female 74 Cone Seat (SAE J514) Product Description Part No.: 26711/26712 Description: Female Swivel JIC 37 Degree Features: * Material: Carbon Steel 45#/SUS304/SUS316 * Surface Treatment: Cr3+/Cr6+/Zinc * Salt Spray Test: 96h/130h Packaging Details 1. All products are equipped with protective caps 2. custom plastic bags 3. Waterproof film and foam protection 4. Carton + pallet/wooden 5.Long-distance seaworthy package 6.According to customers' request Precision machining Every procedure is carefully created, from material selection to processing, attention to detail, strict product quality Stable performance Made of carbon steel, mechanical screw connection, made strictly according to size, reliable performance Surface smooth The surface is polished, lacquered and so on, the chamfer is round, the use feels good, does not scratch.
Interior: Dash Kits, Floor Mats, Seat Covers, Steering Wheels, Sun Shades, Custom Gauges, Cargo Liners, Seats, Dash Covers, Shift Knobs, Car Organizers, Commercial Van Equipment, Pedals, and Exterior : Running Boards, Custom Grilles, Chrome Trim, Body Kits, Off-Road Bumpers, Bed Accessories, Grille Guards, Towing & Hitches, Headlights, Tail Lights, Tonneau Covers, Spoilers, Wind Deflectors, Custom Hoods, Roof Racks, Car Covers, Fender Flares, Mirrors, Bug Deflectors, Car Bras, License Plates & Frames, Vertical Doors, Light Covers, Winches, Bike Racks, Wiper Blades, Mud Flaps, Emblems & Logos, Sunroof Visors, Armor & Protection, Car Wraps, Car Tents, Soft Tops & Hard Tops, Commercial Van Equipment, Spare Tire Covers & Carriers, Snow Plows, Custom Horns, Lighting, Parts, Body Parts, and Audio And Electronics Performance Part Suspension Systems, Brakes & Rotors, Exhaust Systems, Air Intake Systems, Performance Chips, Engine Components, Transmission, Cooling Systems, Turbo & Superchargers, Fuel Systems, Ignition Systems, Steering, Starting & Charging, Driveline & Axles, Caliper Covers, Racing Gear, and Power Adders BODY PARTS Mirrors Headlights, Tail Lights, Bumpers, Fenders, Hoods, Grilles, Doors, Quarter Panels, Auto Glass, Trunks & Tailgates, Interior Parts, Rocker Panels + Floors, Chassis Frames & Body, Header Panels, Window Components, Wipers & Washers, and Roofs Lighting Headlights, Tail Lights, LED Lights, Fog Lights, Off-Road Lights, Signal Lights, Car Bulbs, Trailer Lights, Accessory Lighting, and Emergency & Warning Lighting. Weels & Tires Custom Wheels, Tires, Wheel & Tire Packages, Caliper Covers, Factory Wheels, Wheel Covers, TPMS Sensors, Tire Chains, Lug Nuts & Locks, Center Caps, Wheel Spacers, Spare Tire Covers & Carriers, Wheel & Tire Accessories, and Wheel & Tire Service Tools.
Name: Carbon Steel Pipes for High Pressure Service Standard: JIS G3455-STS410, KS D3564-SPPH42, DIN1630-St44.4, ASTM A524-GrI,II, NF A49-210-Gr.TU42B, ISO 2604/2-75-TS9 Product particular communication: Gr.STS410: C:0.30 Max. Si: 0.10~0.35 Mn: 0.30~1.40 P: 0.035 Max. S: 0.035 Max. 1) Tube dimension(OD�?WT mm) as below: 17.3*3.2; 21.7*2.8; 21.7*3.7; 27.2*3.9; 34*4.5; 42.7*4.9; 42.7*5.8; 48.6*6.4; 2) Accurate tolerance, Smooth surface, Uniform mechanical property(Mechanical Properties equilibrium); 3) Heat treatment: Non-Oxidation,Normalizing or Bright Annealing; 4) Mechanical properties: Tensile: > 450 Mpa; Elongation: > 25% (25%-30% is better) 5) Plastic plugs or caps on both ends as required; 6) Packaging Type: Round, Square, Rectangle, Hexagon. Streamline, etc; 7) Relevant Test: Chemical Component Analysis, Mechanical Properties(Ultimate tensile strength, Yield strength, Elongation), Technics Properties(Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, etc), Exterior Size Inspection, Nondestructive Test, Hydrostatic Test; 8) Main Customers: Hyundai, VOLVO, SANY,Doosan, etc. 9) Origin: China
These pipes are manufactured into different shapes, sizes, and forms as per the requirement of customers. We even make sure that both national and international specifications are included to make high-quality products. Owning the knowledge and skills of qualified professionals and using the latest technology we are able to produce all lengths, shapes, and sizes of seamless pipes. These seamless pipes exhibit various features and properties which make these pipes suitable for all types of application. The features include hardness, toughness, durability, workability, formability, high tensile strength, corrosion and oxidation resistance, and long service life. The entire features make seamless pipes even more popular and demand a wide range of applications. S355J2+N are considered as the most common high strength steel that is mainly used for the construction purpose. This non-alloy structural steel is used in a wide range of applications. The steel is also an excellent choice for critical components. The alloy steel is supplied to manufacturers in hot rolled condition and has high yield strength. Furthermore, it is welder-friendly, high tensile strength, low carbon structural steel that can be readily welded. The steel possesses excellent cold-forming properties. Here symbol â??Sâ?? symbolizes structural steel; J2 symbolizes 20 temperature impact tests. These are the two most important processes done in order to check the quality of seamless pipes. The pipes are manufactured as per the demand and with respect to industrial rules and regulations. The tests include a hardness test, pitting resistance test, flaring test, flattening test, ultrasonic test, third-party inspection, and radiography test. There are few more tests done in order to check the quality of this S355J2+N SEAMLESS PIPE such as positive material identification test, chemical composition analysis, visual inspection and more. The entire testing process is done under the guidance of experts. At last, when all the tests are done these seamless pipes are packed in the high quality of packaging material like wooden cases/boxes, pallets, carton boxes or shrink wrappers. While packing these pipes proper labeling is done on the boxes as this helps customers to easily identify the product.
Specification Details: 1) 1541 Chemical Component Analysis(%): C: 0.36-0.44; Mn: 1.35-1.65; P: < 0.040; S: < 0.050; 2) Monthly Capacity: 6000 tons. 3) Delivery Condition: BKS condition, Annealed(A), Bright Annealing, Normalized(N), Stress Relief Or Finish Anneal(SR), Quenched and Tempered(Q+T), etc; 4) Surface treatment: ASTM A519-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating,etc; Or Oil-dip paint black with two plastic caps on each end 5) Inspection: Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B) 6) Relevant Test: ASTM A519-Chemical Component Analysis,Mechanical Properties(Ultimate tensile strength,Yield strength,Elongation),Technics Properties(Flattening Test,Flaring Test,Bending Test,Hardness Test,Blow Test,etc), Exterior Size Inspection, Nondestructive electric Test,Hydrostatic Test, magnetic particle testing; 7) Marking: All tubes are eddy current tested and are marked with size, cast number and specification. Or as per customer's requirement; 8) Packing: Hexagonal bundles with several steel strips, Wrapped in waterproof paper, PVC sleeve,and sackcloth with several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires; 9) Packing Type: Round , Square, Rectangle, Hexagon. Streamline, etc; 10) Applications: Automobile and Bearing Industry, Drill or oil industry, Mechanical and Structral Purpose, Hydraulic and Petrochemical Purpose, etc.
Material: TP 304/304L, 316/316L, 201, 202, 310S, 321, 800, 600, etc. Tube delivery condition: bright annealing (BA) Tube type: weld, TAW Coil Lengths: max 3000 m per coil tube Standard: ASTM A269, A249 O.D. from 3 to 25.4mm W.T. from 0.3 to 2.0mm Chemical composition: in accordance with ASTM A269 Mechanical and technical properties: in accordance to ASTM A269 Soft annealed max. Hardness 150 HV10 Tolerance +10 points Model type and surface integrity: in accordance with ASTM A269 Surface roughness Ra < 5 μm Cleanliness of the tubes: bore cleanliness in accordance to DIN 8905. The coils shall be dry, clean and free from swarf, drawn and roller marks. Pressure Test: 100% tested at the appropriate pressure stated under water. All coils must be flushed and dried after pressure testing to avoid contamination. Tolerance: D4/T4, Diameter of ball for ball bearing check PMI TEST 100% GOOD ELONGATION IN 50MM LONGITUDINAL HEAT TREATMENT 1050â?? FOR 5MIN (W.Q.) MEASUREMENTS & SURFACE: GOOD IC ASTM A-262 PRACTICE E.NACE MR0175-MR0103 FLARING TESTING AS ASS. TO ASTM A1016 FLATTENING TESTING IS ACC. TO ASTM A1016 100% HYDROSTATIC TEST AS PER A1016/A1016M MARKING SAMPLE: JW STEEL, TP316/316L, welded, Bright Annealed, ASTM A269, OD3/8'' X WT0.035'' HEAT NO.160326T22 MATERIAL ACC TO ASME SECTION II PART A 2010 EDIT CERT TO EN 10204 3.1 IN ACCORDANCE WITH PED ANNEX 1.PARAGRAPH 4.3
Specification Details: 1) Gr. 4130 Chemical Component Analysis(%): C: 0.28-0.33; Mn: 0.40-0.60; Si: 0.15-0.35; S: < 0.040; P: < 0.040; Cr: 0.80 -1.10; Mo: 0.15-0.25; 2) Monthly Capacity: 6000 tons. 3) 4130 SR Condition's Mechanical Properties: Ultimate Strength: > 724Mpa; Yield Strength: > 586Mpa; Elongation: > 10%; Rockwell Hardness B Scale: 95; 4) Delivery Condition: Annealed(A), Bright Annealing, Normalized(N), Stress Relie f Or Finish Anneal(SR), Quenched and Tempered(Q+T), etc; 5) Surface treatment: ASTM A519-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating, etc; Or Oil-DIP paint black with two plastic caps on each end 6) Inspection: Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B) 7) Relevant Test: ASTM 519-Chemical Component Analysis, Mechanical Properties(Ultimate tensile strength, Yield Strength, Elongation), Technics Properties(Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, etc), Exterior Size Inspection, Nondestructive electric Test, Hydrostatic Test, magnetic particle testing; 8) Marking: All tubes are eddy current tested and are marked with size, cast number and specification. Or as per customer's requirement; 9) Packing: Hexagonal bundles with several steel strips, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires; 10) Packing Type: Round, Square, Rectangle, Hexagon. Streamline, etc; 12) Applications: Automobile Industry, Mechanical & Engineering, Fluid Power, etc. 13) Place of origin: China 14) whatsapp: 0086 13812877559 15) e-mail: tubesolution at sina.com Commercial Information: 1) Delicery time: (45-60) days ready at mil also according to the actual weightl; 2) Minium order: 5 Ton; (some specification are excepted) 3) Term of payment: T/T or L/C; 4) Delivery Port: Shanghai Port; 5) Offer Validity: 5-7 Days; 6) Container: 20GP or 40GP or Bulk; 7) Manufacture methods: Cold Finished method or hot finished Method.
ASTM A178 Electric-Resistance-Welded Carbon Steel And Carbon-manganese steel boiler and superheater tubes Tube Details: 1) A178 Chemical Component Analysis(%): Gr. A: C: 0.06-0.18; Mn: 0.27-0.63; P: < 0.035; S: < 0.035; Gr. C: C: < 0.35; Mn: < 0.80; P: < 0.035; S: < 0.035; Gr. D: C: < 0.27; Mn: 1.00-1.50; P: < 0.030; S: < 0.015; Si: > 0.10 2) Tensile Requirements: Gr. A: Tensile strength Min. 47Ksi; Yield Strength Min. 26Ksi, Elongation: 35%. Gr. C: Tensile strength Min. 60Ksi; Yield Strength Min. 37Ksi, Elongation: 30%. Gr. D: Tensile strength Min. 70Ksi; Yield Strength Min. 40Ksi, Elongation: 30%. 3) Manufacture Method: Electric-Resistance Welding; 4) Surface treatment: ASTM A178 & ASTM A450-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating, etc; Or Oil-dip paint black with two plastic caps on each end 5) Quality Test: ASTM A450-Chemical Component Analysis, Mechanical Properties(Ultimate tensile strength, Yield strength, Elongation), Technics Properties(Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, etc), Exterior Size Inspection, Nondestructive electric Test, Hydrostatic Test, magnetic particle testing; 6) Packing: Hexagonal bundles with several steel strips, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires; 7) Applications: Boiler and Heat Exchanger(Wal panel, economizer, reheater, superheater and steam pipeline of boilers), Hydraulic and Petrochemical Purpose, etc. 8) Origin: China Commercial Information: 1) Delicery time: 45 days ready at mil also according to the actual weight; 2) Minium order: 15 Ton/Dimension while not stock raw material; 4) Term of payment: T/T or L/C at sight; 5) Delivery Port: Shanghai Port; 6) Offer Validity: 7 Days; 7) Container: 20GP or 40GP or Bulk; 8) Manufacture methods: ERW method.
4.10.01.030 hexagon socket head screw Check valve S6A1/2 HARTING 9990000319 YELLOW PLASTIC DUST CAP 1-1/4 WF28 MD TOTCO EDMS BOARD 219770-001 Weighing display instrument PLAC-5105L-R-P O-ring bushing AN33001-05.04 O RING: 175 X 3. 55GGB/T3452.1-1992 Screw M8x15 with hex head and full thread GB/T5783-2000 ZQ203-160 Break strap ENG.6.40.066-10.01 ZQ203 01.06.00m Soft seal P100246HP TWS pump Material: rubber ID: 5 Application: plunger XF40-Z Explosion Protected Analogue Zoom Fixed Camera Station Socket 60YZ-4K,400V Balance plate seal 230-3758H887 PACKING GLAND FOR MUD PUMP LINER WASH PUMP SIZE-1X 1.5 LH-8.5 IMPELLER DIA 118 SERIES MCM MCM P18PG Flared combination tee joint 2.4.34.089 Valve REXROTH P-50973-00003 7103-003.19 Membrane keeper Valve 512604900000020801 BEARING CONNECTING ROD,65.02410-0200 Rubber K-1117 1540142 Varco Guide ring P1100160AA for hydraulic release Z07150000009AA Manual Back up Dies 45209 Pressure plate friction clutch for drilling rig MBU-125 Eccentric wheel bearing AH34001-02.19 Pump assembly RS11306A.08.08.00 HRSB YE2-200L2-2 37 kW 2950 rpm 380v 50Hz IM3001 IP54 246-5010/ 246-5009 Engine air filter Liquid tank RS11311.05.01.01 YHT300A explosion-proof all-weather camera protective cover NUT HEX-SLTD SS 50516-S GM2226-020,Bearing Composite Garlock For Chester Worm Drive Electric Low Headroom Chain Hoist Model Elm-0300s MINOR REPAIR KIT J02517701574 Bearing B8-05-02-0075 WASHER A36 01.01-32M XB15 15 Joule Xenon Beacons Exd, Weatherproof 9330009991 connector 5590000121 AIR FILTER harting connector 19300101540 transmission speed sender 29543432 CYLINDER, HYD, PN.AY13257-1 M/D TOTCO tongs pressure gauge GA114-43 GB/T1527-1997Copper tube:10X1270 harting connector 9300030318 Backup Ring O-ring Varco 51301-334 Oilwell Equipment Hydraulic station YZBF-120LD HUMMEL circular plug connector 7680643010 ct. No 3301012070 Rotor drive shaft L=1640 5000700128 for XJ 450 Battery charger 1400021104 / 4NIC-CD240 TDS-8SA SPRING 30182002-13/20508-208 Bushing 45292A SB68J-4.1.4.0 GLAND SET X01173018 SAND PUMP SB6X8FJ 56040821 OUTER AIR FILTER Weatherproof Strobe Light BLG10 AOS element 2250137 ROSSHILL SOLID STATE RELAY CIRCUIT BOARD FOR 8350-SCR/GENERATOR 10043232-001/B 132-8876 power train filter SLEEVE SHAFT MECH 416SS FOR CENTRIFYGAL PUMP MAGNUM MISSION 20943-21 Dies 45293D 114 mm Piston rod GH3161-28.05 Honghua BAY51-Q36 X2xj , Em-Ex Light 2 36w (100v~300v) T8 Ceiling Type O-ring pump seal 23047185 Digital Excitation Controller Model: DECS-100-B15 Part No.: 9287500148 Make: Basler Electric, USA CHECK VALVE, PN.H10057 Ring gasket R39 SY5279.3-91/RS-F-1000 CROUSE-HINDS Series Emergency Lighting Inverter INVCCH12118-36 M/D TOTCO pressure sensor E17-152-40 Plunger piston pump 107645
Sweat hoodies, sweatpants sweatsuit, sports uniforms, t shirt, varsity jacket, soccer ball, backpack and apparels.
Customized clothing, casual pants, sweatpants, jeans, long shorts, long and short sleeves, jackets, sweatshirts.
hoodies, sweatshirts, tee shirts, pullover hoodies, jackets, hats, footwear, activewear, denim, chino pants, chino shorts, swimwear, leggings, sweatpants..
Jerseys, shirts, shorts, socks, cleats, goalkeeper gloves, ball bags, soccer balls, training pants, warm up jackets, team jackets, hoodies, sweatpants, sports bras (for female players), captain's armbands, referee kits, first aid kits, soccer uniform items like home kit, away kit, third kit, goalkeeper kit, training kit, pre match jersey, post match jacket, travel suit, team tracksuit, team jerseys.Exporter around the worlds
Textiles including duvet sets, pillow cases, bed sheets, apparel including t shirts, hoodies, sweatshirts, sweatpants, trousers, shorts, zipper jackets, night wears, boxer shorts, tank tops, leather jackets, socks..Manufacturing, technical assistance
T-shirts, clothing, knitting products, hoodies, tracksuits, shorts, tank tops, joggers, sweatshirts, sweatpants, tshirts, cotton bags, canvas bags, textile fabric, aprons, napkins, bed sheets.
Streetwear, active wear, sportswear and martial arts uniforms, semi peached finish , dry fit , 240 gsm approx sports flare pants, sports bra and leggings .Manufacturing
2. Products description, Jersey or Shirt: Made of lightweight materials like polyester or a blend of polyester and spandex, soccer jerseys are breathable, moisture-wicking, and flexible. They come in various colors and designs, often featuring team logos and sponsor branding. 2 Soccer shorts are also lightweight and comfortable, usually made of materials like polyester or nylon. They have an elastic waistband and allow ease of movement during play. 3, Tall socks are worn over shin guards to protect playersâ?? legs. These socks are an essential part of the uniform. 4, Goalkeepers wear specialized gloves to improve grip and protect their hands during saves.
Jersey (Top): The jersey is usually made of lightweight, breathable mesh fabric. It features the player's number on the front and back. Some jerseys also display the player's last name. Team colors and logos are incorporated into the design. Shorts: Basketball shorts are also made from mesh material for comfort and ventilation. They are loose-fitting to allow for movement during the game. Typically, they match the jersey in color and design. Athletic shoes (basketball sneakers) are essential for players. High-top or mid-top shoes provide ankle support. Traction and cushioning are crucial features. Players may wear compression sleeves, arm bands, or headbands. Socks are usually crew-length or higher.
