LUBENZ PILLAR TURBINE OIL series are supreme performance circulating oils formulated with high quality base stocks and advanced additive technology, to provide exceptional equipment protection and reliability in applications lubricated by circulating systems which are operating under low to medium severity conditions. They are designed to meet or exceed the general requirements of most builders of turbines, vacuum pumps, compressors & bearings and demonstrate high resistance to oxidation and sludge & varnish formation. for more information, please contact us.
LUBENZ INDS REFRIGERATION OIL are high performance lubricants formulated from extremely low wax naphthenic oil primarily intended for use in refrigeration compressors where an uninhibited oil is required. It is recommended for use in refrigeration compressors using ammonia, CFC (chlorofluorocarbon) and HCFC (hydrochloro-fluorocarbon) refrigerants where the evaporator temperature ranges down to approximately -35F or -37C. It is compatible with most refrigerants except sulphur dioxide & are not recommended for use with HFC (hydroflurocarbon) refrigerants. for more information, please conttact us.
LUBENZ SP SEWING MACHINE OIL range of lubricants are premium quality oils specifically formulated for the lubrication of high-speed machine elements in industrial sewing machines. These oils are formulated from very high quality hydro-treated, low viscosity base oils and optimum additive technology system to provide improved thermal, oxidation and color stability. They are available in three viscosity grades,LUBENZ SP SEWING MACHINE OIL 10 (ISO VG 10), SM 15 (ISO VG 15) and SM 22 (ISO VG 22). for more information, please contact us.
LUBENZ LUBETHERM HEAT TRANSFER OIL are high performance HTOs formulated from highly refined base stocks that are resistant to thermal cracking and chemical oxidation & are intended for use in closed indirect heating installations. The flash points of these oils will not decrease significantly in service because of their resistance to thermal cracking at the operating temperatures for which they are recommended. for more information, please contact us.
LUBENZ IND COMPRESSOR OIL of lubricants are supreme performance air compressor oils formulated with high quality base stocks and advanced additive technology, to provide exceptional equipment protection and reliability for compressors operating under mild to severe conditions. They are designed to meet or exceed the requirements of DIN 51506 VD-L standards and demonstrate high resistance to oxidation and deposit formation.
LUBENZ SP FLUSHING OIL is a solvent free, fast acting, engine cleaning formulation that removes engine depos- its, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes. The solvent free formulation protects gaskets and seals from damage during the cleaning process. for more information, please contact us.
LUBENZ XTREME LITHIUM â?? MOLY BASE GREASE are high performance greases, formulated with lithium based thickeners fortified with Molybdenum Disulfide (MoS2) solid lubrication, high quality base oils and extreme pressure additive system to provide excellent protection against wear, rusting and water washout. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 460 & 320. They are suitable for most types of Automotive and Industrial applications, including heavy-duty Marine applications where high temperatures, heavy shock loads and extreme unit pressures are present. LUBENZ XTREME LITHIUM â?? MOLY BASE GREASE greases are suitable for operating temperatures range from -20�°C to 130�°C, while LUBENZ XTREME LITHIUM â?? MOLY BASE GREASE suitable for operating temperatures range from -25�°C to 120�°C for more information, please contact us.
LUBENZ ULTRA NANO LITHIUM COMPLEX GREASE are high performance greases, formulated with lithium complex based thickeners, high viscosity index base oils and extreme pressure additive system to provide excellent protection against wear, rusting and water washout. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 220. They are suitable for most types of Automotive and Industrial applications, including heavy-duty Marine applications where high temperatures, heavy loads and extreme unit pressures are present. EP 1, 2, 3 & 2 Moly greases are suitable for operating temperatures range from -20�°C to 140�°C, while EP 00 & 0 greases are suitable for operating temperatures ranging from -25�°C to 130�°C. for more information, please contact us.
LUBENZ ULTIMATE HIGH TEMPERATURE CLAY BASED GREASE are high temperature greases, formulated with bentonite clay based thickener and extreme pressure additive system to provide extra protection against wear, rusting and water washout especially in industrial equipment operating under heavy loads and high temperatures. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 150 & 320. It retains its consistency at high temperatures and provides good storage stability. for more information, please contact us.
LUBENZ FLUX BRAKE FLUID 4 DOT 4 are supreme performance hydraulic brake fluid based on polyethylene glycol ether technology to provide a high level of brake and clutch performance in automotive and commercial vehicles. They are designed to meet or exceed the general requirements of most builders of automotive disc, drum and anti-skid brake systems and clutch systems, used in average to high performance vehicles requiring DOT 3 or DOT 4 level performance. for more information, please contact us.
LUBENZ GOLDEN TORQUE CONVERTOR HF-32 is a high performance dual clutch transmission fluid, formulated with high quality fully synthetic base stocks and advanced additive technology with consistent shear stability for maintaining optimum film thickness for reliable protection of gears and bearings, also providing an outstanding improvement in friction durability enabling longer drain intervals under a broad range of driving conditions, temperatures and transmissions. It is designed specifically to be used as a service-fill DCT transmission fluid for European, Asian and American vehicles equipped with wet & dry dual clutch transmissions. Outstanding torque retention to provide smooth shift feel without NVH (Noise, Vibration and Harshness) concerns and all-around lubrication protection of the transmission components to help extend transmission service life with a smooth driving experience. It provides exceptional copper corrosion protection for better hardware durability, excellent oxidation control to provide longer fluid life and good seal compatibility for better leakage prevention. for more information, please contact us.
LUBENZ PIONER GREASE CALCIUM BASE-EP series are high performance greases, formulated with Calcium based thickeners and an ISO VG 320 mineral base stock to provide added protection against wear, rusting and water washout. They are available in NLGI grades 2 & 3, which are suitable for general purpose automotive applications at moderate temperatures and loads. The suitable operating temperature range is from -20�°C to 80�°C maximum. It does not contain lead or any other heavy metals which are considered harmful to human health and environment. for more information, please contact us.
LUBENZ ONYX TRUNCK PISTON EO series is a range of high performance 30 TBN marine diesel engine oils formulated with premium quality base stocks and high performance additive detergent technology to ensure optimum performance and protection for trunk piston engines. They are designed to operate efficiently in severe residual-fuelled medium-speed diesel applications found in marine and stationary power industries. These TPEOs provide outstanding residual fuel compatibility and excellent engine cleanliness, especially in crankcase, camshaft areas, ring belt and piston under crowns operating under severe conditions. for more information, please contact us.
LUBENZ PETRO Rock Drill oil series of lubricants are supreme performance Pneumatic Rock Drill & Tool oils, formulated with high quality base stocks fortified with sulfur-phosphorus additive system. They are designed to work efficiently in pneumatically operated rock drills in underground and surface mining operations. They offer optimum adhesiveness and emulsification with water to avoid adverse effects of rust and corrosion. Their excellent wear protection property helps in reducing component wear and maintains adequate lubrication film to carry high loads. for more information, please contact us.
LUBENZ IND SPINDLE OILare formulated from select high-quality, low viscosity base oils and additives that impart good resistance to oxidation and protection from rust and corrosion. They possess very good resistance to foaming and separate readily from water. Specifically designed for the lubrication of high-speed spindles in machine tools. They are also used in some critical hydraulic, circulation systems and airline oilers where the appropriate viscosity grade is selected. for more information, please contact us.
LUBENZ VISTA AUTOMATIC TRANSMISSION FLUID A TYPE A (ATF DEXIII-CVT) is a high performance automatic transmission oil, formulated with high quality base stocks, shear stable viscosity index improvers and advanced additive system to meet or exceed the requirements of General Motors for Type A specification. Suitable for passenger cars and commercial automatic transmissions, for use in applications like power steering systems, hydraulics and some manual transmissions where automatic transmission fluid is specified. for more information, please contact us.
LUBENZ SOLO TRANSFORMER OIL BS and GB are severely refined hydro-cracked / hydro-treated virgin inhibited insulating oils with highest degree of purity and stability. It is manufactured from judiciously selected blend of latest technology feed stocks, which is highly suitable for all grades of Power & distribution Transformers, Circuit Breakers, Oil filled switches and X-ray equipment. for more imformation, please contact us.
LUBENZ GEAR OIL ROXX GL-4 of lubricants are high performance heavy duty gear oils, formulated from high quality base oils and an advanced additive system. These lubricants are designed for automotive heavy- duty transmissions, axles and final drives. Moreover these oils are engineered to work efficiently in transmissions where protection against wear and scoring is required and high level of oil film protection is desired. for more information, please contact us.
LUBENZ SUPER NANO HIGH TEMP CALCIUM SULPHONATE COMPLEX GREASE, made of the NEW GENERATION calcium sulfonate complex soap designed by LUBENZ. This new soap has enhanced properties in terms of water resistance, load capacity, thermal resistance, anticorrosion properties while keeping a very high level of pumpability and ability to lubricate well in case of high speeds. for more information, please contact us.
LUBENZ SP CUTTING OIL is high quality water soluble cutting oil specifically formulated for cutting and grinding operations of metalworking for both ferrous and non-ferrous components. These oils are formulated to provide outstanding emulsion stability & rust inhibition and woks satisfactorily for all types of processes involving fine carbon steels. for more information, please contact us.
