MAIKE is specialized in the design and manufacture of high-quality customized planar transformers and inductors. The factory is based in Mianyang which is the only National Science & Technology city in China and is strategically placed to service the global electronics market. We design and manufacture for a variety of end-user applications ranging from Welding to Aerospace & Automotive & Battery Charging etc. The planar transformer is a transformer with high frequency, low profile, small height, and high operating frequency. Compared with conventional transformers, the size of the magnetic core of planar transformers is greatly reduced, especially when the height is reduced the most. This feature is very attractive in power supply equipment where space is strictly limited, making it the preferred magnetic component in many power supply equipment. The structural advantages of planar transformers also bring many advantages to its electrical characteristics: high power density, high efficiency, low leakage inductance, good heat dissipation, and low cost. Key Features-- (1) High current density. The wires of a planar transformer are actually planar conductors, so the current density is high. (2) High efficiency. The efficiency can reach 98%~99%. (3) Low leakage inductance. Approximately 0.2% of the primary inductance. (4) Good heat conduction. The hot aisle distance is short and the temperature rise is low. (5) Low EMI radiation. Good core shielding can keep radiation to a very low level. (6) Small size. The use of a small magnetic core can reduce the size accordingly. (7) The parameters have good repeatability. Because the winding structure is fixed and easy to pre-process, the parameters are stable. (8) Wide operating frequency range. The frequency can be from 50kHz to 2MHz. (9) Wide operating temperature range. The working temperature is -40 130. (10) Good insulation. The planar transformer is composed of overlapping conductive circuits and insulating sheets, thereby ensuring up to 4 kV insulation isolation between windings, primary-secondary and secondary-secondary.
Grade: Q235B/Q345B/Q420B/Q460C/SS400/SS540/S235JR/S235J0/S235J2/S235JR/S275J0/S275J2/S355JR/S355J0/S355J2 Techniques: Welded/ Hot-rolled / Cold-rolled Coatings: Galvanized/ Black Length: 3-9M, 4-12M, 6-15M or customized Min order: 25Ton, 1x20GP
Grade: Q195/Q235/Q345 Techniques: Hot-rolled Length: 6-12M as customized Width: 10-870MM as customized Thickness: 3-60mm as customized
Grade: Q235/Q235B/Q345/Q345B Techniques: Hot-rolled Length: 6M/12M
Grade: Q195-Q142 Techniques: cold-rolled/ hot-rolled/ welded Coatings: Galvanized Dimension: 100 * 100 * 6mm / 150 * 100 * 6mm
Raw material: mild steel/ stainless steel/ aluminum / customized Grade: A36 / Q235B/ Q345B / Q46045#304 316 / SS400/ S235JR
1.Manufactured by FBATTERY, it's certified with CE, ROHS, and UN38.3 for quality assurance. 2.This 1/2AA-sized battery has a nominal voltage of 3.6V and a capacity of 1200mAh, ensuring a stable and long-lasting power supply. 3.With an operating temperature range of -55�°C to +85�°C, it can withstand extreme conditions. 4.The battery features a low self-discharge rate of less than 1% after one year of storage at 20�°C, ensuring reliability. 5.Suitable for applications in the intelligent and instrument area, remote/wireless systems, and intelligent fire control systems. 6.Its stainless steel container and hermetic glass-to-metal sealing ensure durability and safety. 7.Compatible with various models of 1/2AA batteries, including Tadiran, Saft, and Toshiba. 8.With a shelf life of over 10 years, this battery is built to last. Get your ER14250 Lithium Thionyl Chloride Battery now and power up your water meter alarm with confidence!
3-37mm LVL LVB LVD FACE:bleached poplar, poplar, technology wood, pine, Oguman, birch.
3-37mm
SUNLIGHT AUDIO SWEEPER 7116C Loudspeaker Polarity Tester 139B NOISE GENERATOR 8121C GAUSS METER 138 IMPEDANCE METER 152A DIGITAL HIGH-SPEED Fo METER 7117 C.
Model 7117C has the following two main functions: A.Model-7117C can measure the Fo value of a loudspeaker fully automatically, with no need for manual adjustment of the instrument. The correct Fo value of a loudspeaker is displayed on the DISPLAY PANELã??( 14 ) in just 1 to 1.5 seconds. It has many advantages to using a voltmeter with a needle indicator for measuring the Fo value of a loudspeaker: ( a ) Easy to read; ( b ) No visual error; ( c ) High accuracy. B. Model-7117C can be used in a production line: high speed judging if the Fo value of every loudspeaker is within the qualified range, Judging speed is as fast as in just 0.3 to 0.7 seconds, the â?? PASS / FAIL Testâ?? functions will be indicated instantly. Technical specificationï¼? A. Display: Displayed in 3 �¾digits. B. Accuracy: Fo readout error less than �± ( 1% + 1Hz ) C. Measuring Range: 4 ranges from 16Hz to 3KHz, ( a ) 16Hz - 80Hz ; ( b ) 54Hz - 270Hz. ( c ) 180Hz - 900Hz ; ( d ) 600Hz - 3KHz. D. Fo measuring voltage added on the pre-measure loudspeaker: 1V r.m.s. �± 10%( complies with EIA standard ). E. Can test the impedance of an under-testing loudspeaker: Divided into two ranges, which are (1) 3�© to 18�©; (2) 19�©to 100�©. F. Measuring Speed: ã?? Fo Readout ã??in 1 to 1.5 seconds. ã??PASS / FAIL Testã??in 0.3 to 0.7 seconds. G. Limit Setting: Both the upper & lower limits of a loudspeaker can be preset independently from 16Hz to 3KHz, and have no interference with each other. H. Limitation in usage: Model-7117C can not be used to measure the Fo value of an air suspension loudspeaker, including those loudspeakers which are air-tight frames, since their Q.o. values are too low to measure. SUNLIGHT AUDIO SWEEPER 7116C Loudspeaker Polarity Tester 139B NOISE GENERATOR 8121C GAUSS METER 138 IMPEDANCE METER 152A DIGITAL HIGH-SPEED Fo METER 7117 C.
the weighting filter 8121FT-1 (IEC-268-1) 1 8121FT-1 is the weighting filter made by IEC-268-1 requirement, it must linked with either Model-8121C, to enable it to generate a weighting noise filter that complies with IEC-268-1 requirements, for undergoing the life testing of the loudspeaker and defining the rated power of the loudspeaker 2 When using please take note that: The input signal adopts the Pink Noise, and not other signal of noise sources. 3 Furthermore, the noise generated from this weighting filter also complies with the filter noise required by the JIS C5532. SUNLIGHT AUDIO SWEEPER 7116C Loudspeaker Polarity Tester 139B NOISE GENERATOR 8121C GAUSS METER 138 IMPEDANCE METER 152A DIGITAL HIGH-SPEED Fo METER 7117 C.
Model-8121C uses a logic circuit to generate Pseudo Random Noise, it is the newest and the most advanced design to generate audio white noise. It has a much flatter frequency response than using a diode. Model-8121C has: (1)White noise source. (2)Weighting filters. (3)Built-in power amplifier. (4) TRUE RMS voltage meter circuit. It can generate five different kinds of the noise spectrum, including White Noise, Pink Noise, and three kinds of Weighted Noise, that conform to the following nations standards:(1) JIS C5531, IEEE 219, CNS 4785 (2) EIA 426B(3) DIN 45573 1. White Noise: -3dB Bandwidth: 20Hzï½?100kHz, Roll off:-24dB / Oct. Flatness: �±1dB 2. Pink Noise: -3dB Bandwidth: 20Hzï½?20 kHz Roll-off: -24dB / Oct. Crest factor: 4 ( IEEE 219 ) Amplifier: 1.100W output is defined at an unclipped maximum output of sine wave. 2.Frequency response : 20 Hz~20 kHz ±0.2dB; 20 kHz~100kHz ±1dB 3. Output: With permanent short circuit protection. Load Impedance:
Even in a very noisy environment, Model-139B still has the ability to determine quickly and precisely the positive and negative polarity of a loudspeaker headphone receiver and every single unit in a loudspeaker system. Model-139B also includes 3 sets of external input terminal and selector which can be used to combine with other instruments, in order to measure the other features of a loudspeaker simultaneously. It is quite suitable for 100% Q.C. testing for loudspeakers in the production line. Loudspeaker Polarity Tester 139B Technical specification: (1) Pulse measuring method. (2) Polarity indicator : (a) Green indicator: Positive polarity with beep sound. (b) Red indicator: Negative polarity with no sound at all. (3) Five touch switches : (a) WF range: Suitable for measuring the polarity of the woofer. (b) M & T range: Suitable for measuring the polarity of midrange and tweeter. (c) EXT.1 to EXT.3: Used to select the instrument connected to the external input terminal. (4) Model-139B can be connected with Model-7116C, to measure the buzz, and rattle of a loudspeaker. Only one operator is needed. (5) Measuring distance: 2 to 4 Cm. from the center point. of the dust cover of the pre-measure loudspeaker. (6) Measuring sensor: Uses ECM. (7) Dimension ( m / m ): 85 ( height ) x 205 ( width ) x 280 ( depth ). (8) Weight: 2.3 Kg. SUNLIGHT AUDIO SWEEPER 7116C Loudspeaker Polarity Tester 139B NOISE GENERATOR 8121C GAUSS METER 138 IMPEDANCE METER 152A DIGITAL HIGH-SPEED Fo METER 7117 C.
Model-8121C uses a logic circuit to generate Pseudo Random Noise , it is the newest and the most advanced design to generate audio white noise. It has a much flatter frequency response than using a diode. Model-8121C has: (1)White noise source.(2)Weighting filters. (3)Built-in power amplifier. (4)�¢?? TRUE RMS �¢?? voltage meter circuit. It can generate five different kinds of noise spectrum, including White Noise, Pink Noise, and three kinds of �¢??Weighted Noise�¢??, that conforms to the following nation�¢??s standards:(1) JIS C5531, IEEE 219, CNS 4785 (2) EIA 426B(3) DIN 45573 1. White Noise: -3dB Bandwidth: 20Hz 100kHz, Roll off:-24dB / Oct. Flatness: �?�±1dB 2. Pink Noise: -3dB Bandwidth: 20Hz�¯�½?20 kHz Roll-off: -24dB / Oct. Crest factor: 4 ( IEEE 219 ) Amplifier: 1.100W output is defined at an unclipped maximum output of sine wave. 2.Frequency response : 20 Hz~20 kHz �±0.2dB; 20 kHz~100kHz �±1dB 3. Output: With permanent short circuit protection. Load Impedance: 3.2
Men Crew Socks With Argyl Pattern Designs
We provide the following services.... 1-Sampling 2-Merchandising 3-Quality control/ Inspection. 4-Style and fit approval. 5-Logistics and follow up Our Products: Products for Mens:- T-shirt, Polo, Boxers shorts, Sleepwears, Sportswear, Sweatshirts, Trousers, Tank tops, Ensembles, Cardigans, Bermudas,Underwear sets. Products for Womens:- T-shirt, Cycling shorts, Nightwear, Ensembles, Cardigans, Sweatshirts, Skirts, Beachwear, Tank top, Blouses, Loggings, Pyjamasets. Products for Infants wears:- Bodysuit, Tank tops, Dresses and Rompers,Sweaters, Hoodies and Outerwear, Newborn necessities, Sleepwear and Shorts and Capris.etc... IF you have any enquiry then pls send the details by direct email
Ferrosilicon alloy is a deoxidizer used in steelmaking production. It improves the shape of inclusions and reduces the content of gas elements in molten steel. It is an effective new technology to improve steel quality, reduce costs, and save aluminum. It is especially suitable for the deoxidation requirements of continuous casting molten steel. Practice has proved that it not only meets the deoxidation requirements of steelmaking, but also has desulfurization performance and has the advantages of large specific gravity and strong penetrating power. The production of silicon-aluminum ferroalloy can be divided into the following three stages 1. Generation of silicon carbide At lower temperatures, SiO2 reacts with carbon to produce silicon carbide, 2. Generation of aluminum oxide carbides and carbides In the temperature range of 1600~2000�ºC, carbon reacts with aluminum oxide to form aluminum oxide and silicon carbide; 3. Intermediate compounds such as carbides decompose silicon-aluminum-iron to form. At a higher temperature, aluminum oxide, silicon carbide, aluminum carbide and silicon dioxide react to obtain silicon-aluminum; only high-quality silicon-aluminum ferroalloy can produce high-quality silicon-aluminum iron blocks. When purchasing silicon-aluminum iron balls, you need to pay attention to Its quality, the quality of silicon aluminum iron ball has a direct impact on its application.
Recycled low density polyethylene (ldpe), high density polyethylene (hdpe), polypropylene (ppe), and polyvinyl chloride (pvc) .Sourcing, processing, and exporting
High fashion women's wear, sports wear, men's shirt, pant, blazer, t shirt.
