Hardness tester LK120 Features: Easy one handed operation Digital Display Compact body for areas of restricted space Slim detector allows measurements to be taken on complex curved surfaces such as welds, moulds etc, as well as conventional flat surfaces Conversion function for different hardness scales Self calibrating Supplied with NAMAS certified test piece Used in any direction Lightweight, portable and easy to carry Using large-screen 128 * 64 dot matrix LCD module, information abundant and intuitive. Can be pre-set limit, hardness, when beyond the scope it automatic alarm, convenience customers batch test. English display: menu type operation, uses simple and convenient. Technical parameter: Measuring scope: HLD (170-960) HLD Measuring direction: support plummet, inclined, level, oblique, pure vertical measured material: Steel ,alloy steel, stainless steel, grey cast iron, ductile iron, zinc alloy, copper alloy ,casting of copper, , Copper alloy (brass, bronze), pure copper, forged steel . Hardness formats: HL,HB, HRB, HRC,HRA,HV,HS Display: high contrast segment code type LCD display Data storage: maximum 500 groups (impact times: 32-1) Paper width: 57.5¡À0.5£©mm Paper coil diameter: 30mm Work voltage: 6V Nimh batteries Work Time: about 150h, With power saving function like auto dormancy, automatic shutdown etc. Measuring direction: 360¡ã operating temperature: -10 ~ +50¡æ Shape dimension:213*80*215mm relative humidity:
RDLM system is mainly including three parts, which are the level sensors, safe barrier (or Junction Box) and monitor (different kind of display alarm units or PC computer). Compared with the project.
Temperature£º
Temperature£º
1.pre-freezing at in situ situation, transparent organic glass door to observe working procedure. 2.The tray temperuate adjustable,controllable, detectable ;its suitable for pilot scale and small production. 3.LCD display working situation and PID control,drying curving display on the LCD. 4.optional gas valve to fill with inert gases like nitrogen gas. Drying area :0.2©O No. of trays :2 Condenser lowest temperature: ¡Ü-50¡æ ¡Ü-70¡æ£¨optional£© tray temperature range: -50¡æ¡«50¡æ Distance between trays :70mm trays size :265mm*400mm*25mmX2mm Water capture: 3Kg/24h Liquid loading capacity :2L 22 vial 370pcs 16 vial 768pcs 14 vial 970pcs 12 vial 1300pcs Vaccum degree ¡Ü10Pa Mashine cooling Air cooling External dimension 600mm*660mm*1100mm. External dimension 600mm*660mm*1100mm.
CME 3CCD endoscopes camera system adopts the global advanced video technology with over 800-line horizontal resolution and signal-to-noise ratio of over 62db. It uses the advanced 720p progressive system which improves the image sensitivity with no flickering. Complicated many advanced digital signal processing technology, cme 3ccd camera can provide an exceptionally stable picture with high visual information for excellent image details. It is especially suitable for clinical use in laparoscope, gynecological laparoscope, thoracoscope, rectoscope and flexible choledochoscope etc. 10 kgs.
Dimension L x W x H 4,600 x 1,800 x 1,300 (mm) Production Capacity 5 - 8 (tons / hr ) (Adjustable by frequency converter) Degree of Vacuum ¡Ü - 0.092 (Mpa) Augers Nominal Diameter ¡é400 / ¡é300 (mm) Extruding Pressure 3.0 (mpa) (Main / Vacuum Pump) Motor Power 37 / 5.5 (kw) Weight ¡Ö 6000 (kg) Features of Type TL-CXJ-300B 1. Leading technology specially made for high-grade extruded wet-forming ceramic tiles and bricks, especially for making the split tiles, roofing tiles, special shaped tiles and clay bricks etc. 2. Casting-steel-structured machine body, high strength gear-box, special alloy steel augers etc., to ensure high quality and reliable of production. Wooden frame bottom support.
Dimension L x W x H 2,838 x 1,724 x 1,540 (mm) Working Frequency ¡Ý70 (times/min) (Adjustable) To Be Split Tiles Size L x W£º(~300) x (~200 ) (mm) (Adjustable) Main Power 1.9 (kw) Weight ¡Ö 1500 (kg) Features of Type TL- PZJ-AT The type TL- PZJ-AT of leading technology specially made for the high efficient and auto-splitting process, by which the wet-forming co-extruded double-piece split tiles being split to separated pieces of final split tiles in up to 70 times per minute working frequency and beyond 99.5% qualified rate. Wooden bottom frame.
Feature: compact construction, large capacity, easy operation, long service life. Specification: Drum load: 200KN Nominal speed: 9.6m/min Holding load: 590KN Diameter of rope: 40mm Capacity of rope: 250m Other specifications are available.
Drive mode:electric or hydraulic operated With single or double gypsy, with single or double drums With or without single or double warping head. Apply for chain: 17.5mm-50mm With local/remote control stand Manually/hydraulic operated brake Manually/hydraulic operated clutch.
Feature: large reduction ratio, compact construction, easy mounting & disengaging, steady in rolling and low voice. Specification: Mooring load: 100KN Nominal speed: 0-18m/min Capstan diameter: 600mm Chain diameter: 30mm Rated pressure: 20MPa. Speed range: 0.3-80r/min Volume efficiency: ¡Ý94% Other specifications are available.
Feature: compact construction, large loading capacity, safe and reliable, easy operation. Specification Safe working load: 15t Working radius: 3.7-12m Hoist height: 30m Hoisting speed of rope: 20m/min Luffing speed: 50-65s Slewing speed: 0.8r/min Other specifications are available.
Feature: excellent air-proof, good appearance, easy mounting and operation. Size: 450*630mm-1030*1330mm Other specifications are available Feature: excellent air-proof, good appearance, using for oil tank and chemical tanker. doorway: round type: diameter 570-1170mm elliptical type: 720x1170-820x1470mm Other specifications are available.
The system can be used as standing light moved freely, or a table light to save space. High quality pipe design for you to adjust the angle randomly. Fast and easy teeth whitening by using 6 pieces of 5w LED with an output at 1500 mw/cm2. Simple and fast pre-preparation program with digital LCD display showing the operation time and light intensity. The 3-LED in the left/center/right side are divided into 3 grades: High, Medium and Low. Patientí»s canine and pre-molar can also enjoy perfect whitening with the equal source of light. Wireless operation by built-in lithium battery. When fully recharged, the machine can be used for 1 hour in case of power failure. With an average of 8 shades, you can finish the full teeth whitening at 30 minutes. Specifications: 1. Wavelength: 420nm-490nm 2. Light resource: SEMA LED 3. Emission time: 5mú¼10m, 15m, 20m by modes 4. G.W.: 5kg 5. Input power: 100-240V AC, 50/60Hz 6. Output power: 12V DC, 2.2A 7. Whatí»s included: SEMA LED Cool Light Teeth Whitening System, Main Poles, Transformer, Machine Base, Instruction Manual, and Mouth Guard. Carton package.
The system can be used as standing light moved freely High quality pipe design for you to adjust the angle randomly. Fast and easy teeth whitening by using 6 pieces of 5w LED with an output at 1500 mw/cm2. Simple and fast pre-preparation program with digital LCD display showing the operation time and light intensity. The 3-LED in the left/center/right side are divided into 3 grades: High, Medium and Low. Patient's canine and pre-molar can also enjoy perfect whitening with the equal source of light. Wireless operation by built-in lithium battery. When fully recharged, the machine can be used for 1 hour in case of power failure. With an average of 8 shades, you can finish the full teeth whitening at 30 minutes. Specifications: 1. Wavelength: 420nm-490nm 2. Light resource: SEMA LED 3. Emission time: 5mú¼10m, 15m, 20m by modes 4. G.W.: 5kg 5. Input power: 100-240V AC, 50/60Hz 6. Output power: 12V DC, 2.2A 7. Whatí»s included: SEMA LED Cool Light Teeth Whitening System, Main Poles, Transformer, Machine Base, Instruction Manual, and Mouth Guard. Carton package.
Wound negative pressure drainage system nps - 2000 (type b) An effective system to accelerate wound healing, a kind of simple, low cost of treatment system. Wound negative pressure closed drainage with pva refers to cover or foam dressing, skin and soft tissure defect of filling, wound, with drainage holes on the transparent paster, pasted with closed drainage tube through pressure systems, through the negative pressure control to achieve full, complete and instant drainage, promote wound healing of a new method. The whole system is very deft, can even make patients returned to work and daily activities. Compared to the conventional wound care, reduce the search and replace dressings; the number of nurses, disposable filter will reduce the odor, intelligent control wound pressure increases patient comfort, leakage, as many as 10 blockage of the alarming protective function ensures the safety of patients. Wound negative pressure drainage system, trauma, trauma, negative pressure and negative pressure drainage wound pressure wound therapy, trauma, negative pressure treatment, the data vsd closed drainage, daniel alves first. 111
Dimension L x W x H 3650 x 1700 x 825 (mm) Production Capacity 15 - 25 (tons / hr) Stirring Barrel Length 2200 (mm) Motor Power 22 (kw) Weight í+ 2500 (kg) Features of Type TL-JBJ-290II 1. Specially made for the material preparation process with three functions of stirring, mixing with water & kneading. 2. Type TL-JBJ-290II works by adopt structures of two shafts separately rotating in opposite directions to treat the materials. (It is available to add hoppers according to different requirement, like type 290II-L) Adopts the package of bottom wooden frame, bolt reinforcement supporting, and outer waterproof film for the machines; and wooden trunk for other parts or the wear parts.
Dimension L x W x H 4,600 x 1,800 x 1,300 (mm) Production Capacity 5 - 8 (tons / hr ) (Adjustable by frequency converter) Degree of Vacuum í_ - 0.092 (Mpa) Augers Nominal Diameter íT400 / íT300 (mm) Extruding Pressure 3.0 (mpa) (Main / Vacuum Pump) Motor Power 37 / 5.5 (kw) Weight í+ 6000 (kg) Features of Type TL-CXJ-300B 1. Leading technology specially made for high-grade extruded wet-forming ceramic tiles and bricks, especially for making the split tiles, roofing tiles, special shaped tiles and clay bricks etc. 2. Casting-steel-structured machine body, high strength gear-box, special alloy steel augers etc., to ensure high quality and reliable of production. Adopts the package of bottom wooden frame, bolt reinforcement supporting, and outer waterproof film for the machines; and wooden trunk for other parts or the wear parts.
Dimension L x W x H 4,644 x 1,960 x 1243 (mm) Capacity 5 (m3) Feed Speed 1.6 (m/min) Motor Power 4.5 (kw) Weight í+ 3000 (kg) Features of Type TL-WLJ-5L 1. Specially made for the material preparation process with three functions of mixing, storage & feeding. 2. TL-WLJ-L series mainly for all kinds of lump materials like wet clay lump by adopt chain plate conveying. (It is available to design small or big hoppers according to different capacities requirements) Adopts the package of bottom wooden frame, bolt reinforcement supporting, and outer waterproof film for the machines; and wooden trunk for other parts or the wear parts.
Luminance:12, 000 Color temperature:4300k plus or minus 500k Sport diameter:160 ~280mm Lllumination depth :greater than or equal 600mm Light-adjusting mode:eight grade dimmer system Temperature at surgeon's head :less than or equal to 2 degrees Color indcatoin index:greater than or equal 97% Power supply:220v plus or minus 22v 50hz plus or minus 1hz Input power:220w Bulb of power(w):150 Lowest herght of installation 2900mm
