Concrete batching mixing plant Mobile concrete batching/mixing plant: Offered in 12/15/18/20/35m3/hr. Capacity with pan type mixer. Mixer having electronic load cell type weighing system. Loading of aggregates / sand done by wheel loader / conveyor / manual. Inbuilt water and additive tank. Fully automatic-electronic operation with integrated plc/pc control and remote function. Plant can be erected & commissioned within two days. Plant can be transported in single 40 feet trailer.
Model: JY0.6 Walking type: crawler-type Bucket form: backacting shovel Application: universal Engine brand:Yanmar/Changchai Horsepower: 5kw Rated rotate speed: 3000r/min Total displacement:0.296L Air cylinder number: 1 Cylinder diameterxroute: 78*62mm Working weight: 550kg Bucket capacity: 0.028 m³ Walking speed: 3km/h Rotation speed:13rpm Ground pressure: 18kpa Grade ability: 70% Maximum excavating force: 8.6kn Length*width*height: 3200*950*1850 Track link width: 130mm Track link length: 1100mm
Model No. SWT508-MAX SWT508-MAX1 SWT508-MAX2 Power AC220/ 50HZ Motor Rated 500W Rated 800W Rated 1000W Display English/Chinese Cutting Length 1-60000mm 1-100000mm Stripping Length (mm) Wire Head 0-50 Wire Tail 0-50 Wire Head 0-100 Wire Tail 0-100 Wire Head 0-150 Wire Tail 0-150 Cutting Tolerance ± (0.002xL)mm ± (0.001xL)mm Middle Stripping 13sections 16 sections Cut core cross-section 0.2ï½?16mm2 0.3ï½?25mm2 0.3ï½?25mm2 1ï½?70mm2 Catheter Max. Diameter ï¿ 13 ï¿ 18 Appropriate Wire PVC Wire, Teflon Wire, Glass Wire, Multistrand steel wire Blade Material Hard Tungsten Steel Production (piece/hour) 16SQMM2000-3000 25SQMM 3000-4000 4000-5000 5000-6000 Drive Mode 4 wheels 8 wheels 8 wheels independent drive
Engine model LR4M3Z-23 Turbocharge engine PTO power at rated speed 62.5 Clutch Dry,Dual-stage type PTO Speed(rpm) 540/1000 Capacity of fuel tank(L) 150. Dimension LxWxH mm 4593x2050x2810 Wheel base(mm) 2195 Track base(mm) front wheel 1610 Track base(mm) rear wheel 1620-2020 (usual 1620) The smallest clearance(mm) 379 Front tyre 12.4-24 Rear tyre 16.9-34.
Model No. SWT508C SWT508-SD SWT-SDB SWT508-SDB2 Power AC220/ 50HZ Motor Rated 160W Rated 200W Display English/Chinese Cutting Length 1-9999 mm Stripping Length (mm) Wire Head 0-35 Wire Tail 0-15 Wire Head 0-50 Wire Tail 0-30 Cutting Tolerance (0.002xL)mm Middle Stripping 11 sections Cut core cross-section (SQMM) 0.1-2.5 0.1-4.5 Single wire0.1-4.5 Double wires 0.1-2.5 Catheter Max. Diameter 6 Appropriate Wire PVC Wire, Teflon Wire, Glass Wire Blade Material Hard Tungsten Steel Production (piece/hour) 3000-8000 3000-8000 5000-10000 4000-10000 Drive Mode 2 Wheels 4 wheels
The HG60 high-strength steel semi-trailer we provide is a more durable material than ordinary steel. Its load-carrying capacity is 5 times that of Q345 steel. It not only ensures the safety during the transportation of goods, but also avoids unnecessary maintenance to extend the life of the product. The 3 axle low bed trailer for excavator is a particularly versatile and extensive low loader system and is suitable for the transport of: 1> Construction machineries ( excavation and bulldozer , wheel loader .etc ) 2> Forestry machines ( harvester , skidder , forwarder . etc ) 3> Farming machines ( tractors , combine harvesters . etc ) 4> Structural elements ( steel and concrete elements ) 5> Industrial parts ( transformers , crane-loaded goods .etc ) 6> Conveying and crushing systems ( demolition and recycling industry ) 7> Bulky goods , long materials and heavy loads Specification: Brand: CIMC 3 axle excavator low bed trailer Dimension(mm): 13000*3000*2950mm Loading capacity(T): 40-60T Axle: 3 axle,13T/16T, FUWA / BPW / CIMC/Other Brand Tire: 8.25R20/10.00R20/11.00R20/12.00R20 Suspension: Mechanical suspension or air suspension Kingpin: 90# Landing gear: JOST brand Brake system: WABCO Light:LED light Electrical System: 24-volt lighting system
Kaisong mainly offers Komatsu excavator parts, and also provides customers technical support. The company aims to make home-made construction machinery parts be widely used. Kaisong will enter the world with generosity and open mind like that of Confucian. The company has been insisting on the cooperation with Komatsu OEM plants for years, and the value of operating inventory has passed 8million Yuan. The applicable models are Komatsu hydraulic excavators and loaders ranging from 6T-40T. The main products include: Komatsu maintenance parts, NOK seal parts, engine parts and accessory, various specifications of bucket in abnormal shapes, normal arms and long reach boom, pin bushing and rod, cylinder assembly and single-piece, reducer system and gears, various series of oil radiator and water radiator, and the common four wheels and track. We guarantee to provide you Komatsu products with good price/performance ratio, and we promise: genuine and accurate parts with cheap prices and quick delivery. According to the material of products
Dimension: 3000mm*1390mm*1980mm Wheel base: 2100mm Wheel tread (front/rear): 1100mm Minimum ground clearance: 135mm Rated voltage: 48v Rated power: 3kw Maximum speed: 30km/h Climbing capacity: 30% Distance range: more than 80km Braking distance: less than 5m Minimum turning radius: 4m Overall weight: 820kg No. of seats: 4. Container.
Dimension: 3100mm,1460mm,1720mm Wheel base:1200mm Wheel tread (front/rear): 2080mm Minimum ground clearance:150mm Rated voltage: 48v Rated power: 5.5kw Maximum speed: 60km/h Climbing capacity: 25% Distance range: 90km Braking distance: 5m Minimum turning radius: 5.0m Overall weight: 950kg No. of seats: 4. Container.
Stocked steel grades: 12/14% Manganese, X120 Mn12, X120 Mn13, Creusabro M, ASTM A128 Grade B2, DIN W1.3401, Z120 Mn12. 2mm-12mm + Up to 600 HB MANGANESE STEELS A high manganese, fully austenitic, quench annealed, non-magnetic, work hardening steel with an exceptionally high level of wear resistance when subjected to work hardening by shock or high impact pressure in service. Severe wear on the surface has a work-hardening effect on the austenitic structure of this steel. This, when combined with the level of carbon in accordance with the international standards, leads to an increase in hardness from 200BHN (in as delivered plates) up to an in-service hardness of at least 600BHN. This work-hardening capability renews itself through out in-service life. The underlayers not work-hardened maintain an excellent resistance to shock and a very high ductility. TYPICAL APPLICATIONS: Quarries and Constructions: Earth moving crusher jaw, grizzly, screen, stone chutes, chain guide and shredder plates, shovel buckets. Mines: Bucket blade of loader, chain conveyor parts, sprocket wheel, various armouring elements. Iron Industry, Foundry: Guiding and shifting plates, scraps container, liner of shot blasting unit, pedestal liner, flanged bolster cup, wear liner. Concrete and Brickworks: Core and dividing wall of parpen mould, grinding mill scraper, mixer paddle. Scraps - Recoveries: Wheel disk, striker and hammer mill. Automotive Industries: Shot blasting equipment. All steel is supplied with full mill test certificates to DIN EN 10204-3.1. Payment: L/C, T/T, Cheque, Transfer, Cash, VISA.
Stocked steel grades: 12/14% Manganese, X120 Mn12, X120 Mn13, Creusabro M, ASTM A128 Grade B2, DIN W1.3401, Z120 Mn12. 2mm-12mm + Up to 600 HB MANGANESE STEELS A high manganese, fully austenitic, quench annealed, non-magnetic, work hardening steel with an exceptionally high level of wear resistance when subjected to work hardening by shock or high impact pressure in service. Severe wear on the surface has a work-hardening effect on the austenitic structure of this steel. This, when combined with the level of carbon in accordance with the international standards, leads to an increase in hardness from 200BHN (in as delivered plates) up to an in-service hardness of at least 600BHN. This work-hardening capability renews itself through out in-service life. The underlayers not work-hardened maintain an excellent resistance to shock and a very high ductility. TYPICAL APPLICATIONS: Quarries and Constructions: Earth moving crusher jaw, grizzly, screen, stone chutes, chain guide and shredder plates, shovel buckets. Mines: Bucket blade of loader, chain conveyor parts, sprocket wheel, various armouring elements. Iron Industry, Foundry: Guiding and shifting plates, scraps container, liner of shot blasting unit, pedestal liner, flanged bolster cup, wear liner. Concrete and Brickworks: Core and dividing wall of parpen mould, grinding mill scraper, mixer paddle. Scraps - Recoveries: Wheel disk, striker and hammer mill. Automotive Industries: Shot blasting equipment. All steel is supplied with full mill test certificates to DIN EN 10204-3.1. Payment: L/C, T/T, Cheque, Transfer, Cash, VISA.
Parameter Engine PERKINA/KUBOTA/XINCHAI Rated power(kw) 35.7/36.5/36.8 Rated speed(rpm) 2600/2600/2650 External dimensions: length * width * high 3413*1780*2007(mm) Operating weight(kg) 3003 Max travelspeed(km/h) 12 Performance Rated operating capacity(kg) 840 Tipping load(kg) 1600 Max.dump height(mm) 2303 Reach at max.dump(mm) 675 Turn radlus,front tyre(mm) 1230 Wheel base(mm) 999 Bucke capacity(m³) 0.35 Fuel tank capacity(m³) 88 Hydraulic tank capacity(m³) 70
Parameter Engine PERKINA/KUBOTA/XINCHAI Rated power(kw) 35.7/36.5/36.8 Rated speed(rpm) 2600/2600/2650 External dimensions: length * width * high 3413*1780*2007(mm) Operating weight(kg) 3003 Max travelspeed(km/h) 12 Performance Rated operating capacity(kg) 840 Tipping load(kg) 1600 Max.dump height(mm) 2303 Reach at max.dump(mm) 675 Turn radlus,front tyre(mm) 1230 Wheel base(mm) 999 Bucke capacity(m³) 0.35 Fuel tank capacity(m³) 88 Hydraulic tank capacity(m³) 70
Max. Capacity: 1000kn / 2000kn Rated pressure: 40mpa Relative error: ía2% Piston stroke: 40mm Measuring range: 0 - 500kn %26amp; 0 - 1000kn / 0 - 800kn %26amp; 0-2000kn Pressure platen size: 230mm x 290mm Distance between platens: 320mm / 330mm Power supply: 220vac 750w
Model : C650D-EXP blasthole drill Specifications: Rated capacity : Nominal hole size 7-7/8(200 mm ) by Rotary method, Upto a depth of 148 (45.12 m) using 30 long 6.25 OD drill pipes. Standard mounting : Tengl, India make Under Carriage model T23/D4 , 24 Triple grouser track 10 6 long with 9 bottom rollers and 2 carrier rollers each side. Independent hydraulic motor with Planetary gearbox drive for each track. Propel speed is 3.0 KMPH on plains and 1.5 KMPH on grades. Gradeability up to 25% grades with Mast down. Pulldown and hoist :Pulldown is achieved through twin hydraulic cylinders and roller chain arrangement. 33 head travel for handling 30 long drill pipe. Pulldown capacity: 35,000 LBS. Hoisting capacity: 20,000 LBS. Standard feed rate: 14 FPM Standard hoist rate: 25 FPM Fast feed rate: 70 FPM Fast hoist rate : 124 FPM MAST : Electrically welded square and rectangular steel mast of robust construction to withstand adverse drilling conditions. Mast is raised and lowered by two hydraulic cylinders with safety check valves. Working height of mast 38 for 30 long drill pipe. ROTARY HEAD : Axial piston hydraulic motor driven top head drive through spur gear reduction with a constant torque of 48,000 Inch-pounds at 0-150 RPM infinitely variable speed. AIR COMPRESSOR: Screw compressor with a capacity of 900 CFM at 100 PSI. Air oil receiver, Oil cooler, Oil filters and safety valves are provided as standard. PRIME MOVER: Cummins India make engine NTA 855C running @ 1800 RPM drives compressor @ flywheel end and hyd. pumps @ front PTO. Fuel tank capacity : 750 lit. DRILL PIPE HANDLING: Hydraulically operated Four pod loader suitable for handling 6.25 OD x 30 long drill Hydraulic power breakout wrench and stem wrench are provided as standard. HYDRAULIC SYSTEM : Open loop hydraulic system for propel, rotation, feed, Fan, auxiliary and pilot circuits. Axial piston ,variable volume pump: 48 US GPM at 4700 PSI for tram circuit and at 4200 PSI for rotation circuit. Axial piston pump : 12 US GPM at 2500 PSI for feed circuit. Gear pump for ROC fan : 22 US GPM at 3000 PSI for ROC fan circuit and 15 US GPM at 2000 PSI for auxiliary circuit. Hydraulic oil reservoir with suction strainers and 10 micron return line filters. Relief valves in all circuits. LEVELLING JACKS : Three hydraulic jacks - one front 140 MM bore, 48 stroke; two rear 125 MM bore, 36 stroke equipped with heavyduty telescopic guide tubes and lock check valves for safety. OPTIONAL EQUIPMENT: Centralised Lubrication system Shock sub for rotary head Rotary Deck Bushing Hyd powered winch Electronic depth counter Automatic Power breakout system Fire detection and suppression system Fast fuelling system Retractable dust curtain Water injection system with water tank.
Model MGM960 Operation Weight 23500kg Engine Power 175kw Rated Load 20000kg Lift Height 3000mm Length 8400mm Width 2950mm Height 3480mm Wheelbas 3600mm Min.Ground Clearance 460mm Tyre 23.5-25-24PR Drive Type 4WD Fuel tank 300L Hydraulic oil tank 300L Drive speed Forward (1/2) 11.5/36km/h Reverse (1)16km/h Max.gradeability 20 Turning angle 35 Optional equipment 1. Weighing device 2. Cummins engine 6CTA8.3 3. Hangzhou transmission WG180 4. ZF transmission WG200 5. Pilot control 6. Italy tube 7. Air conditioner 8. Luxury seat 9. Tyre protection chain 10. Bucket Remarks: The specification is subject to change without notice. Notes of the equipment working 1. When working, the equipment must be fitted to protection chain. 2. When the rated load is 20t, the largest lifting height should be less than 1.5m. 3. In order to be safe, at the soft surface, slope, steering angle is greater than 10, the heavy load's focus is forward, the load should be limited to 14 tons. 4. Max. gradeability should be less than 20. Powerful performance 1. The turbocharged engine with low oil consumption and high quality, enjoys good performance and strong torque. 2. The planetary power shift transmission and hydraulic torque converter with two turbo have wider high-efficient area, easy control and high reliability. 3. Integral quenching fork is high intensity and more wearable. 4. Enlarged 25t axles have a strong surport capacity. 5. Hydraulic coaxial flow-enlarge style turning system makes operation easy and flexible. 6. Sound/heat isolated and damping ROPS luxury cabin with broad view, MP3 and comfortable seat makes operation more safe and reliable. 7. Double-tube caliper disc brake in four wheels and rear installed brake booster make the operation more safe and reliable.
Model No. SWTâ??508E SWT508-JE SWT508-JE2 Power AC220/ 50HZ Motor Rated 300W Rated 500W Display English/Chinese Cutting Length 1-9999 mm Stripping Length (mm) Wire Head 0-35 Wire Tail 0-15 Wire Head 0-50 Wire Tail 0-50 Cutting Tolerance ± (0.002xL)mm ± (0.002xL)mm ± (0.001xL)mm Middle Stripping 11 sections 16 sections Cut core cross-section 0.1-8 SQMM 0.2-10 SQMM Catheter Max. Diameter 10 13 Appropriate Wire PVC Wire, Teflon Wire, Glass Wire PVC Wire, Teflon Wire, Glass Wire, Multistrand steel wire Blade Material Hard Tungsten Steel Production (piece/hour) 3000-5000 4000-7000 Drive Mode 4 Wheels
MODEL C650D-EXP BLASTHOLE DRILL SPECIFICATIONS RATED CAPACITY : Nominal hole size 7-7/8¡¨(200 mm ) by Rotary method, Upto a depth of 148¡¦ (45.12 m) using 30¡¦ long 6.25¡¨ OD drill pipes. STANDARD MOUNTING : Tengl, India make Under Carriage model T23/D4 , 24¡¨ Triple grouser track 10¡¦ 6¡¨ long with 9 bottom rollers and 2 carrier rollers each side. Independent hydraulic motor with Planetary gearbox drive for each track. Propel speed is 3.0 KMPH on plains and 1.5 KMPH on grades. Gradeability up to 25% grades with Mast down. PULLDOWN AND HOIST : Pulldown is achieved through twin hydraulic cylinders and roller chain arrangement. 33¡¦ head travel for handling 30¡¦ long drill pipe. Pulldown capacity : 35,000 LBS. Hoisting capacity : 20,000 LBS. Standard feed rate : 14 FPM Standard hoist rate : 25 FPM Fast feed rate : 70 FPM Fast hoist rate : 124 FPM MAST :Electrically welded square and rectangular steel mast of robust construction to withstand adverse drilling conditions. Mast is raised and lowered by two hydraulic cylinders with safety check valves. Working height of mast 38¡¦ for 30¡¦ long drill pipe. ROTARY HEAD :Axial piston hydraulic motor driven top head drive through spur gear reduction with a constant torque of 48,000 Inch-pounds at 0-150 RPM infinitely variable speed. AIR COMPRESSOR :Screw compressor with a capacity of 900 CFM at 100 PSI. Air oil receiver, Oil cooler, Oil filters and safety valves are provided as standard. PRIME MOVER : Cummins India make engine NTA 855C running @ 1800 RPM drives compressor @ flywheel end and hyd. pumps @ front PTO. Fuel tank capacity : 750 lit. DRILL PIPE HANDLING : Hydraulically operated Four pod loader suitable for handling 6.25¡¨ OD x 30¡¦ long drill Hydraulic power breakout wrench and stem wrench are provided as standard. HYDRAULIC SYSTEM : Open loop hydraulic system for propel, rotation, feed, Fan, auxiliary and pilot circuits. Axial piston ,variable volume pump: 48 US GPM at 4700 PSI for tram circuit and at 4200 PSI for rotation circuit. Axial piston pump : 12 US GPM at 2500 PSI for feed circuit. Gear pump for ROC fan : 22 US GPM at 3000 PSI for ROC fan circuit and 15 US GPM at 2000 PSI for auxiliary circuit. Hydraulic oil reservoir with suction strainers and 10 micron return line filters. Relief valves in all circuits. LEVELLING JACKS : Three hydraulic jacks - one front 140 MM bore, 48¡¨ stroke; two rear 125 MM bore, 36¡¨ stroke equipped with heavyduty telescopic guide tubes and lock check valves for safety. OPERATOR¡¦S CAB :Fully enclosed spacious steel fabricated, sound suppressed, thermal insulated, Air-conditioned and safety glassed cab with centralised controls for operator¡¦s convenience. Adjustable seat for operator¡¦s comfort and a seat for Helper. DUST CONTROL SYSTEM : NVE type dust control system, equipped with hydraulic motor driven blower and dry type filters. NIGHT LIGHTING : Adequate lighting to enable operation of drill at night times. Lights powered by engine alternator at 24V, DC supply. WEIGHT AND DIMENSIONS :(Approx.) Length(mast down) : 43¡¦ 0¡¨ Length(mast up) : 32¡¦ 0¡¨ Width : 14¡¦ 2¡¨ Height(mast down) : 16¡¦ 0¡¨ Height(mast up) : 42¡¦ 6¡¨ Operating Weight : 73,500 LBS OPTIONAL EQUIPMENT: Centralised Lubrication system Shock sub for rotary head Rotary Deck Bushing Hyd powered winch Electronic depth counter Automatic Power breakout system Fire detection and suppression system Fast fuelling system Retractable dust curtain Water injection system with water tank Angle hole drilling kit upto 25„a in steps of 5„a. 122
1.Rated capacity (kg): 2,000 2. Max lifting height (mm): 4,000 3. Diesel engine: Weichai, Changchai or according to customers¡¯ requirements. 4.Weight distribution with load front/rear (kg): 4775/635, 5525/745, 6500/870, 6925/1035 5. Internal combustion engine displacement: 2.54 L 6. Internal combustion engine fuel tank capacity: 52 L 7. Total weight ( kg) : 3200 8. Service brake: Hydraulic-foot pedal, 9. Parking brake: Mechanical-hand lever 10.Battery voltage ( V): 12/100/20h 11.Tilting angles ( forward-backward): 6¡ã/12¡ã 12.Loader center: 500 mm L:2650mm W:1300mm H:2110mm
1.Rated capacity (kg): 3,000 2. Max lifting height (mm): 4,000 3. Diesel engine: Weichai, Changchai or according to customers requirements. 4.Weight distribution with load front/rear (kg): 4775/635, 5525/745, 6500/870, 6925/1035 5. Internal combustion engine displacement: 2.54 L 6. Internal combustion engine fuel tank capacity: 52 L 7. Total weight ( kg) : 4350 8. Service brake: Hydraulic-foot pedal, 9. Parking brake: Mechanical-hand lever 10.Battery voltage ( V): 12/100/20h 11.Tilting angles ( forward-backward): 6/12 12.Loader center: 500 mm L:2600mm W:1300mm H:2140mm.
