Solar Wafer Cutting wire Silicon Cutting Sawing Wire Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.
Steel Cord for Radial Tire 0.315+6*0.3HT Brass plated steel cord which is made from high carbon steel high-strength strands,is the inside reinforcement structure for radial tire. With strong coating,nice surface quality,average mechanical property,full stress relieving,the steel cord are widely used in radial tires for automabile and other tires. Hengxing can produce steel cord for many types of radial tire,including compact cord,high elongation cord,high impact cord and betru cord. Steel Cord for Radial Tire 0.315+6*0.3HT Meets the highest performance, safety, environment and cost criteria Extends tire life Enhanced wire-to-rubber adhesion for higher safety Lower costs, lower weight and higher fuel savings
Item: Diamond wire Shape:wire Material: Imported C-steel Diameter:55μm-450μm available INTRODUCTION: 24 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 3000000 Kilometers of sawing wire
The breaking strength of diamond wire is high and stable; the diamond particles is well distributed and and no agglomeration, to keep the diameter of diamond wire uniform withdifferent diamond density; strongbonding force of plating ,and there's no peeling and cracks; the coating is compact and smooth, the appearance looks silver andbeautiful. 24 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 3000000 Kilometers of sawing wire ISO/TS 16949 And ISO9002 certificated
Item: Diamond wire Shape:wire Material: Imported C-steel Diameter:55μm-450μm available INTRODUCTION: 24 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 3000000 Kilometers of sawing wire ISO/TS 16949 And ISO9002 certificated
Item: Diamond wire Shape:wire Material: Imported C-steel Diameter:55μm-450μm available INTRODUCTION: 24 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 3000000 Kilometers of sawing wire ISO/TS 16949 And ISO9002 certificated
Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support Copper coated wire /rubber hose wire 0.25mm (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
Copper coated wire /rubber hose wire 0.25mm (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to
High quality hydraulic hose wire Item: Copper Plated Hose Reinforcement wire Nominal diameter:0.2 mm normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please) Material: high carbon steel grade Surface: brass coated 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of brass wire for hose reinforcement ISO/TS 16949 And ISO9002 certificated One of China standard settlers for the steel wire for rubber hose reinforcement GB/T 11182-2003 http://en.hengxingchinese.com/ Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsahttp://en.hengxingchinese.com/
Excellent Mechanical Properties GSW Steel Wire Rope Certificate (1)Meets or exceeds ASTM Specifications A475 or A363 or ASTM B498 or BS EN 50189; (2)Clean and firm hot-dip zinc coating; (3)Shining surface ; (4) Excellent corrosion resistance.
Advantage of Diamond wire for silicon slicing The breaking strength of diamond wire is high and stable; the diamond particles is well distributed and and no agglomeration, to keep the diameter of diamond wire uniform withdifferent diamond density; strongbonding force of plating ,and there's no peeling and cracks; the coating is compact and smooth, the appearance looks silver andbeautiful. INTRODUCTION: 24 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 3000000 Kilometers of sawing wire ISO/TS 16949 And ISO9002 certificated
Item: Diamond wire Shape:wire Material: Imported C-steel Diameter:55m-450m available INTRODUCTION: 24 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 3000000 Kilometers of sawing wire ISO/TS 16949 And ISO9002 certificated
high quality Brass Plated Tyre Steel Cord Meets the highest performance, safety, environment and cost criteria Extends tire life Enhanced wire-to-rubber adhesion for higher safety Lower costs, lower weight and higher fuel savings high quality Brass Plated Tyre Steel Cord Brass plated steel cord which is made from high carbon steel high-strength strands,is the inside reinforcement structure for radial tire. With strong coating,nice surface quality,average mechanical property,full stress relieving,the steel cord are widely used in radial tires for automabile and other tires. Hengxing can produce steel cord for many types of radial tire,including compact cord,high elongation cord,high impact cord and betru cord.
High Tensile Steel Cord for Radial Tyres Brass plated steel cord which is made from high carbon steel high-strength strands,is the inside reinforcement structure for radial tire. With strong coating,nice surface quality,average mechanical property,full stress relieving,the steel cord are widely used in radial tires for automabile and other tires. Hengxing can produce steel cord for many types of radial tire,including compact cord,high elongation cord,high impact cord and betru cord. High Tensile Steel Cord for Radial Tyres INTRODUCTION: 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of steel cord ISO/TS 16949 And ISO9002 certificated steel cord for tire reinforcement for passenger car,truck, off road tires and more
High Quality Steel Cord for Radial Tyres Brass plated steel cord which is made from high carbon steel high-strength strands,is the inside reinforcement structure for radial tire. With strong coating,nice surface quality,average mechanical property,full stress relieving,the steel cord are widely used in radial tires for automabile and other tires. Hengxing can produce steel cord for many types of radial tire,including compact cord,high elongation cord,high impact cord and betru cord. High Quality Steel Cord for Radial Tyres INTRODUCTION: 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of steel cord ISO/TS 16949 And ISO9002 certificated steel cord for tire reinforcement for passenger car,truck, off road tires and more
Item: Sawing wire for multi-wire sawing Shape:wire Material: Imported C-steel Coating:Brass,combinations Number of wires:1 Diameter:65um-350um available INTRODUCTION:Hengxing Cutting Ceramic and SiliconHigh Strength Ultra Fine Diamond Cutting Wire 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 10,000 tons of sawing wire ISO/TS 16949 And ISO9002 certificated
Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology INTRODUCTION:115UM/120UM/ 0.16mm Silicon Wafer Cutting Ultra Fine Sawing Auto Glass Cut Out Wire 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 10,000 tons of sawing wire ISO/TS 16949 And ISO9002 certificated
Henan Hengxing Science&Technology Co.,Ltd was founded in 1995 which is a large-scale key enterprises in Henan province, National Torch Technology enterprise which focus on high-tech, Chinas largest manufacturer of saw wire,galvanized steel wire, steel strand, the biggest radial tire with cord manufacturer in Henan province, the domestic A-share listed company with stock code of 002132. It has two wholly owned subsidiaries and 3 subsidiaries, the existing staff of more than 2200 people. Company's total assets of 3.3 billion yuan with sales income of 1.95 billion yuan and tax of 150 million yuan during the year of 2012. Ultra fine wire is high carbon, cold drawing of brass plated of high strength steel wire, it can be used for cutting high hardness of monocrystalline silicon, polycrystalline silicon and quartz material etc. Henan Hengxing Science&Technology Co.,Ltd can provide all kinds of all kinds of the length of the wire, the line length subject only to the spool take-up capacity limit. H wheel type mainly includes NTC210 type, BS200, BS64, BS126, etc. According to customer needs to provide other specification size h wheel.
Item: Sawing wire for multi-wire sawing Ultra Fine Wire Saw For Cutting High Hardness of Monocrystalline Silicon Shape:wire Material: Imported C-steel Coating:Brass,combinations Number of wires:1 Diameter:65um-350um available 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 10,000 tons of sawing wire ISO/TS 16949 And ISO9002 certificated Can provide all kinds of all kinds of the length of the wire, the line length subject only to the spool take-up capacity limit. H wheel type mainly includes NTC210 type, BS200, BS64, BS126, etc. According to customer needs to provide other specification size of h wheel.
Advantage of Sawing Wire for Solar Wafer Cutiing Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology Sawing wire for multi sawing solar wfter cutting Item: Sawing wire for multi-wire sawing Ultra Fine Wire Saw For Cutting High Hardness of Monocrystalline Silicon Shape:wire Material: Imported C-steel Coating:Brass,combinations Number of wires:1 wire Other Name: Solar Wafer Cutting wire Silicon Cutting Sawing Wire Diameter:65um-350um available
