FFP3 provides the highest level of protection that a disposable mask can offer. A well-fitting FFP3 mask can protect users against fine toxic particulates including asbestos, bacteria, viruses and radioactive particles.
Good Quality Medical Grade Mask Approved CE Certification, FDA Approved and with Certificate of Confirmity.
Origin : China with FDA and CE
FFP3 respirators CE certification.
General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified in accordance with the European standard EN14683:2005 BFE 95% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Non-splash resistant Comfort Features Breathing resistance < 29.4 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type I medical masks effectively resist bacterial penetration with a rating of at least 95% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 95 â?? 99.9% protected from inhaling airborne pollutants. 100% compliant with regulations (CE, EN14683:2005) Our surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The combination of a soft lightweight material and comparatively low breathing resistance allows for greater breathability. This also means the fabric is more absorbent, which serves to lessen the moisture build-up. Disposable In order for your Type I mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.
General Features Size: 17.5 x 9.5cm Colour: Blue and white Materials: polypropylene, non-woven fabric Packaging: 50 masks per box Safety Features CE certified In accordance with the European standard EN14683:2005 BFE â?¥98% The middle polypropylene layer filters airborne particulate matter Water-absorbent inner layer to alleviate the moisture build-up Water-repellent outer layer to prevent inhalation of large liquid droplets Non-splash resistant Comfort Features Breathing resistance & 29.4 Pa/cm2 The soft material makes the mask-wearing more comfortable A non-irritating inner layer Adjustable nose clip for a better fit Elastic ear loops for a more secure mask adjustment 3 layers Our 3-ply surgical face masks have a multi-ply design to better prevent inhalation of non-oily airborne pollutants. The blue outer layer and white inner layer are made out of non-woven materials, with a polypropylene filtration layer in the middle. The non-woven layers are designed to provide a comfortable fit, with the protective melt-blown middle layer serving as the barrier. Bacteria filter efficiency (BFE) Our Type II medical masks effectively resist bacterial penetration with a rating of at least 98% in accordance with the European standard. Therefore, you can go about your business, knowing that you are 98 â?? 99.9% protected from inhaling airborne pollutants. 100% compliant with regulations (CE, EN14683:2005) Our surgical masks are 100% CE certified. They are also in accordance with the European standard EN14683:2005. Please note that if you need reassurance regarding the certification of our products, we are willing to send you the copies of the relevant documents upon request! High breathability The combination of a soft lightweight material and comparatively low breathing resistance allows for greater breathability. This also means the fabric is more absorbent, which serves to lessen the moisture build-up. Disposable In order for your Type II mask to effectively protect you from the pollutants you should wear it for a maximum of four to five hours. Please do not share your 3-ply face mask with other people. If your mask becomes damaged or dirty, throw it away. Please follow the World Health Organisation's (WHO) guidelines for correctly putting the mask on and off.
General Features Size Universal Colour White Packaging 20 masks per box Fluid resistant Optional design Cupped or folded Safety Features CEcertified FDAcleared In accordance with the Chinese standard GB26262006 Filtration efficacy of PM25 99 Filtration efficacy of PM03 95 Disposable Inward leakage lt8 Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic ear loops for a more secure maskadjustment High fit effectiveness Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA GB26262006 Our KN95 respirators have been confirmed to meet all of the performance requirements set by the Chinese standard GB26262006 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your KN95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Fluid Resistant Our filtering face piece respirators are FDAcleared as being adequately fluid resistant Therefore they are recommended for use during surgical procedures or circumstances where one could come in contact with infectious splatters of bodily fluids User Seal Check Before entering a possibly contaminated area you need to properly put on your filtering face piece To do this you need to Take the mask by its ear loops one in each hand with the nose clip up Position the respirator under your chin Place each ear loop behind its respective ear Adjust the mask carefully against your face not allowing for any gaps between the mask and your face Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect its position and then quickly exhale Depending on where you fill the air passing adjust the nose clip or the entire mask accordingly following the aforementioned steps If there are no gaps for the air to pass through you have correctly put on the mask
General Features Size Universal Colour White Packaging 20 masks per box Optional design Cupped or folded Safety Features CEcertified FDAcleared In accordance with the US standard NIOSH42CFR84 Filtration efficacy of PM25 99 Filtration efficacy of PM03 95 Disposable Comfort Features The soft material makes the maskwearing more comfortable Adjustable nose clip for a better fit Two elastic ear loops for a more secure maskadjustment High fit effectiveness Fits more tightly against the face cupped respirators Conveniently portable folded respirators Filtration efficacy Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants It is extremely effective 9599 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO 100 compliant with regulations CE FDA NIOSH42C FR84 Our N95 respirators have been confirmed to meet all of the performance requirements set by the US standard NIOSH42C FR84 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request Nonreusable NR In order for your N95 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use Cupped Design Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket If youre looking for a more portable alternative check out our folded mask design Remember if your mask gets damaged its best to just throw it away User Seal Check Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to Take the mask in one hand so that the nose clip is turned upwards Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The bottom strap should go below your ears over your neck The top strap should go high on your head above the ears Adjust the mask carefully against your face not allowing for any gaps between the mask and your face Adjust the nose clip with both hands to ensure the nose clip is firmly tightened Pinching it with just one hand is not advised as it might affect the tightness of the mask Finally check if you completed all of the steps correctly by putting both of your hands over the mask so as to not affect it
Medial Face Mask,Civilian Mask Feature: Three-layer design: Can effectively filter the gray layer. Highly elastic and soft ear hooks. Each is individually packaged and clean. You can adjust the radians according to the different nose shapes. The mask is medium in size and fits most people's face shapes. Disposable face masks to protect against dust fluids germs and weather Perfect mask when travelling through congested airports bus terminals malls parks and busy city streets
Precipitated Calcium Carbonate (PCC) is synthetic calcium carbonate. It is white ultra-fine crystalline powder having consistent Particle Size Distribution and Excellent dispersibility. Precipitated Calcium Carbonate (PCC): High Purity lime stone is calcined in Lime Kiln to produce quick lime which is slaked and further carbonated to produce PCC slurry, which is filtered and dried to produce pure white PCC Powder. Activated Calcium Carbonate (ACC): Activated Calcium Carbonate is produced by surface coating the Precipitated Calcium Carbonate slurry with Fatty Acids (Stearic Acid) and Titanate Coupling Agent. Filtering and drying of the coated PCC slurry to produce ACC Powder. The particle size, as well as the crystal form, is controlled by temperature, concentration of reactants and time. Price: INR 5,000/- to 20,000/-
Vibhuti is an age-old practice is made of dried cow-dung cakes in a traditional/ sacred way followed since ancient times. Cow-Dung cakes are dried on rocks to avoid dust and sand. Cow-dung covered with hay & paddy husk (without rice), baked to get the sacred ash called Vibhuti. After burning cow-dung has to be kept for 7-10 days to get fire extinguished. At the end cow dung cakes will burned completely & become ash. This then filtered and mixed with Javadhu, Herbals to get 100% pure Javadhu vibhuti. This is done on Sivarathiri day on every month. The Cow dung from Indian breed cows are best used for making vibhuti. Vibhuti (Sacred Ash) is one of the primary non-milk output comes from the holy cow. Vibhuti is foremost of saivite a symbol which is to be adorned in oneâ??s body. It is also called Thiruneer in Tamil and is also traditionally associated with curative properties. Pure Vibhuti is Aiwswaryam-Wealth (Prosperity) and Goddess Lakshmi resides in Gomaya and in Gomaya Vibhuti. We also have Viboothi Paste and Roll on in this divine fragrance having mesmerizing effect on skin and body when applied. Fragrance is pleasant, long lasting and effective when applied during prayers, yoga or meditation. Contents of Javadhu Vibhuti : Cow-dung Paddy Husk Herbal Mix Features : Text of Cow-Dung Vibhuti is very soft & fine Its color is pure white Fragrance is very much Natural and long lasting Free from Rough or coarse particles Long Life Good for Health and do not have any side effects because of Cow-dung Available in 1kg to 25kg packing based on requirement
In the time of the coronavirus situation, we would like to offer a solution to keep you safe. We present to you our protective FFP3 mask: - Made 7 layers from SS + 5 layer fibers wadding + SMS - Size is UNI. It can be adjusted by the elastic band with a clip. - Can be branded with logo. We have certificates CE; TEST; Declaration of conformity;
[FFP3 series, KP302, ] 1. Headband, good elasticity cotton headband. 2. Flat-fold. 3. Internal sponge nose pad design. 4. Filter material, high-efficiency, free and smooth breathing. 5. Fit face shape. 6. Disposable, soft, comfortable. 7. Application: construction, hardware, glass, cement, mining, textile, polishing, pharmaceutical and etc... 8. Auto Manufactured. 9. [standard: EN149:2001 + A1:2009 FFP3 NR]/// 10.[carton size: 67x30x26.5CM 500 pieces/ box 500 pieces/ carton G.W.: 5.7 KGS] /// 11.[OEM orders & ODM orders are welcome. CE certificate & test report. White list in China Commercial Bureau.] Filtrate bacteria >=95%
FFP3 TP301 mask, Duckbill Shape 1. Ear band, good elasticity cotton headband. 2. Flat-fold. 3. Internal sponge nose pad design. 4. Filter material, high-efficiency, free and smooth breathing. 5. Fit face shape. 6. Disposable, soft, comfortable. 7. Application: construction, hardware, glass, cement, mining, textile, polishing, pharmaceutical and etc... 8. Auto Manufactured. 9.[standard: EN149:2001 + A1:2009 FFP3 NR]/// 10.[carton size: 80.5x39.5x40.5CM 30 pieces/ box, 600 pieces/ carton, G.W.: 11.4KGS] /// 11.[OEM orders & ODM orders are welcome. CE certificate & test report. White list in China Commercial Bureau.] Filtrate bacteria >=99%
Product name: FFP3 mask Standard: EN149:2001+A1:2009 Certificate: CE certificate, ISO 9001, SGS Color: white (other)
comply with EN149, CE issued by NB companies
Production company for certified masks : Surgical masks, respirators, flat folded masks, half folded masks, cup masks, conic masks and various disposable products. We are certified with ISO, TUV, CE, N99 and FFP3. Quality products made with US and EU norms.
The product has all the necessary certificates. Product available in stock, immediate dispatch via TNT, UPS or FEDEX For 5000pcs Free 24h delivery - For selected EU countries
Everything invoice covered 6,5 euro for a piece Mask has every single test and required quality standard Located in Poland
Vertical fold-flat, without exhalation valve Welded elastic earloops Imbedded nose clip, sponge nose lining CE approved by UNIVERSAL (NB no. 2163) Tested and certified according to EN 149:2001+A1:2009 Class: FFP3 NR This respirator mask is certified and classified as FFP3 under EU standard EN 149:2001+A1:2009. EN 149:2001+A1:2009 - Respiratory protective devices - Filtering half masks to protect against particles. This European Standard specifies the minimum requirements for filtering half masks used as respiratory protective devices, specifically against particles, and the required laboratory and practical performance tests to assess masks' compliance. EN 149:2001+A1:2009 classified half masks into three types according to their filtering capacities: FFP1, FFP2 and FFP3. Respirators that meet the requirements of EN 149:2001+A1:2009 are designed to protect against solids, water-based aerosols, and oil-based aerosols. FFP3 masks have a minimum of 99% filtration percentage and maximum 2% leakage to the inside. They are mainly used in construction, agriculture, and by healthcare professionals against influenza viruses.