Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, especially suitable for copper and aluminum electronic components, radiator, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type aluminum extrusion and precision cutting of different profile. 1 high precision sawing, no burr, no need for secondary processing, high efficiency. 2 only foot switch, automatic mechanical pressure and sawing. Safe and easy. Pressure parts using high quality rubber strip, not easy to damage the surface of the workpiece. 3 hidden saw blade sawing from the bottom up, high safety, single or multiple materials sawing at the same time, small vibration, low noise. 4 the pressure system is driven by two-way linear bearing and controlled by an independent air pressure cylinder, with high pressure stability (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure) 5 press height and speed and saw cutting height and speed can be set according to material size and thickness. 6 the spindle runs at high speed, and equipped with automatic oil injection device, to provide the saw blade with proper lubrication, make the workpiece surface smoother without burr, extend the service life of the saw blade 7 additional Angle template can be cut Angle. Model ZG-455SAL specifications Sawing angle 90°&45° Maximum sawing width 300mm Maximum sawing height 140mm Saw blade 3200R.P.M Blade size Tungsten steel blade with blade tip Ï?355-455Ã?Ï?25.4mm Size of Table 650Ã?670Ã?860mm Machine motor 5HP/2P three-phase Pressure required 5-6kg/cm2 Machine dimension ( LxWxH ) 1030Ã?860Ã?1360mm Packing dimension ( LxWxH ) 1050Ã?880Ã?1380mm NW/GW 335/385kg
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, especially suitable for copper and aluminum electronic components, radiator, audio panels, graphics CARDS, network CARDS, CPU, hard disk aluminum shell, MP3 shell, aluminum doors and Windows, picture frames, light boxes, screen, display equipment, line type lamp, aluminum furniture, aluminum extrusion and precision cutting of different profile 1 accurate sawing Angle, high precision, smooth cutting surface without burr, high efficiency. 2 only foot switch, automatic mechanical pressure, automatic saw material is safe and easy 3 hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time 4 the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure) 5 press height and speed and saw cutting height and speed can be set according to material size and thickness. 6 precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life 7 can do ± 0~45 degrees arbitrary Angle saws, Angle adjustment convenient and accurate Model ZG-410SA Sawing angle +45° ~ 0°~ -45° Blade size 16"x1" Inner hole Saw blade 3200R.P.M. Machine motor 3 HP Pressure required 4-6kg/cm2 Size of Table 800x400mm Table height 850mm NW/GW 500 /530kgs Machine dimension ( LxWxH ) 1100x1000x1600mm Packing dimension ( LxWxH ) 1200x1100x180mm
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, especially suitable for copper and aluminum electronic components, radiator, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type aluminum extrusion and precision cutting of different profile. 1ã?? high precision sawing, no burr, no need for secondary processing, high efficiency. 2ã?? only foot switch, automatic mechanical pressure and sawing. Safe and easy. Pressure parts using high quality rubber strip, not easy to damage the surface of the workpiece. 3ã?? hidden saw blade sawing from the bottom up, high safety, single or multiple materials sawing at the same time, small vibration, low noise. 4ã?? the pressure system is driven by two-way linear bearing and controlled by an independent air pressure cylinder, with high pressure stability (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure) 5ã?? press height and speed and saw cutting height and speed can be set according to material size and thickness. 6ã?? the spindle runs at high speed, and equipped with automatic oil injection device, to provide the saw blade with proper lubrication, make the workpiece surface smoother without burr, extend the service life of the saw blade 7ã?? additional Angle template can be cut Angle. Model ZG-455SAL specifications Sawing angle 90°&45° Maximum sawing width 300mm Maximum sawing height 140mm Saw blade 3200R.P.M Blade size Tungsten steel blade with blade tip Ï?355-455Ã?Ï?25.4mm Size of Table 650Ã?670Ã?860mm Machine motor 5HP/2P three-phase Pressure required 5-6kg/cm2 Machine dimension ( LxWxH ) 1030Ã?860Ã?1360mm Packing dimension ( LxWxH ) 1050Ã?880Ã?1380mm NW/GW 335/385kg
Features 1.Adopting hydraulic shearing, small volume, high cutting force and high output, low noise, long service life and stable operation, etc. 2.Adopting import seal to the hydraulic cylinder, it is greatly increased service life. Technical Parameter (Note: as your reqested size, we can customize for you.) NO Model FHS-32 1 Rebar Diameter range 12-40mm 2 Max cut power 120Kn 3 Effective shearing width 250mm 4 Shear frequency 20times/min 5 Rebar convey speed 1.92m/s 6 Shear length 1-12m 7 Shear error ±2mm 8 Min Manual shear size 10mm 9 Min auto shear size 700mm 10 Min auto convey size 1000mm 11 Rebar stock bin 4pcs 12 Processing capability 40mm 1 bar--12mm 15 bar 13 Total power 25.5KW 14 Work temperature -10-50�?? 15 Weight 9000 kg 16 Working voltage 380V 17 Working air pressure 0.7MPa 18 Hydraulic system max pressure 31.5Mpa 29 Overall dimension 28m(L)
Technical Parameter of the automatic twin head rebar bending machine factory Model FHB2-32 Overall Size 12000*2155*1690(L*W*H) Working Voltage 380V Installed Power 15.5KW(working power 5KW),50-60Hz Bender moving speed 0.1-0.5m/s Bending Speed 30°-48°/S(5-8r/min) Overall Weight 4.5tons Min Length scope of the stirrup side 70mm Max bending angle Upward bending 0-200° Downward bending 0-120° Bi-directional bending (up or down bend) Φ10mm-Φ28mm Unidirectional bending (upward bending) Φ28mm-Φ32mm Min. Space between stirrup side ¢10 560mm ¢32 620mm Max bending length 10.5m Feeding speed of storage convey table 0.6m/s Load capacity of storage convey table 3T Working Temperature -10�??�??+50�?? Processing ability Bar diameter ( mm) Φ10 Φ12 Φ14 Φ16 Φ18 Φ20 Φ22 Φ25 Φ28 Φ32 Bars Quantity (pcs) 7 6 5 4 3 3 2 1 1 1 Note: as your requested size, we can commission the machine you need
Principle of the machine structure: The steel bending and bending hoop mainly consists of four parts: the transmission mechanism, the frame, the bending and bending hoop fixture and the electrical control. During operation, the motor drives the gear via the V-belt and the pulley, and then the gear rotates the working disk. Advantages of the Mini type bar bender (1 ) 11 teeth on one axis, high strength (2)High-frequency heat treatment of spline shaft, using high-strength gears to increase service life (3)Separation of spindle and work disk. It is more convenient to disassemble and maintain. (4)Spindle bearing a dopts double seal (seal bearing and upper shaft seat plus seal) to prevent iron oxide enter the bearing during work. (5)Configure foot switch and manual button for easier operation (6)Spindle with high frequency heat treatment, high toughness (7)Sturdy skid type baffle plate, effectively reducing the bending load of the motor. (8)Pressure clutch is adopted, and clutch return is more accurate. (9)The main shaft gear adopts semi-circular teeth to ensure that there is no winding phenomenon when the steel bar is bent. (10)The bending process is simple, the work efficiency is high, the bending is neat, and the bending angle can be arbitrarily adjusted. Technical Parameter Model FHGW-26 Long-term bending ability round bar 4--26mm 3 grade 4--25mm bending speed 32R/Min(90°) 28R/Min(135°) voltage 380V motor model 3Kw-4P Machine dimension 850x550x870 weight 190Kg operate method CNC/full automatic/manual Note: as your requested size, we can commission the machine you need.
Plate rolling Our metal plate rolling facilities are listed first class not only in china but also in world wide. We have over 10 plate rolling machines, including a hausler heavy plate roller, capable of rolling steel plates up to 4250mm in width by 210mm in thickness. We also have a range of other machines including the faccin sertom and more. We can carry out all necessary metal processes before rolling, such as cnc cutting, plate bevelling, and also the process of shot blasting and painting after rolling Our coastal location makes for convenient transportation across the globe. Users in petro-chemical pipelines, wind tower construction can take our manufacturing service flexibly.
Aluminum Bending Machine Operating principle Automatic feed , slot and bend Available material Flat,Channel Aluminum Slot angle 45°-135° Bending radius =12mm Feeding width 20mm=Width=128mm Feeding thickness Flat Aluminum: 0.3mm-1.2mm Channel Aluminum: 0.3mm-1.0mm Machine watt =1500W Machine size 1350mm*700mm*1300mm Machine weight 350KG Voltage 220V/110V Working air pressure 0.6Mpa Key Specifications/Special Features 1.Automatic feed , automatic notch, automatic bend 2.No need to fit the trimcap separately, simplified the fabricate process 3.High speed, stepper motors controlling system, it only takes 48 seconds to finish a 30cm height letter like s 4.Available material width ranges from 20mm to 128mm 5.Energy saving and environmental protection. Total power 1500w, actual service power less than 1500w. 6.Can read muti-vector file, the formats like dxf ,ai ,matching with the engraving software perfectly. 7.Size :1350*700*1300mm 8.processing materials: flat aluminum and channel aluminum. Processing width: 20mm-128mm aluminum :0.3mm -1.2mm(flat), 0.3mm-1.0mm(channel) 9.Special specification of this equipment is available. MOQ: 1 set Packaging: Wooden case
Stainless Steel Bending Machine Operation principle Automatic feeding,slotting and bending Available material stainless steel,galvanized iron Drive motor Servo motor 1set, Step motor 3set Bending radius =3mm Material width 20mm-120mm Material thickness stainless steel 0.3-1.0mm, galvanized iron 0.3-1.0mm Power 2.5kw Machine size 1900mm*1000mm*1350mm Machine weight 420kg Voltage 220V Working Air pressure 0.6-0.8Mpa File format AI?DXF?PLT Feeding speed 2-5m/min Key Specifications/Special Features 1.Servo control system, high precision, fast speed, improved working efficiency 2.The slotting tool can be used repeatedly when sharpen, lower the cost. 3.The groove depth, slotting frequency can be adjustable when slotting different thickness of materials. 4.The appearance is compact and takes small space. 5. The software is easy to learn and operate. MOQ: 1 set Packaging: Wooden case
Characteristics High speed automatic textile laser cutting machine, using high-definition digital slr to one time realization the high precision imaging, which is including the large-format and multi-pattern, and avoid the error of splicing the image and the decline in image quality. This machine adopting high speed, high precision stepper motor, automatic feed, automatically capture the border and cutting speed is 2.5 times than of the traditional, which is the best choice of modern high-speed fully automatic large enterprise. Advantages 1 using vision positioning system, auto identity the material edge 2 using high-definition digital slr to one time realization the high precision imaging 3 automatically feeding the material 4 automatically correct and find the border again when the prints was deformed 5 using high-speed stepper motor 6 suitable for etching industry, leather, packaging and logo cutting industry Wide application: Suitable for clothã?�embroiderã?�fabric toyã?�furnitureã?� reticule ã?�gloveã?�bagã?�leatherã?�engraving cuttingã??modelã?�advertisingã?�decorationã?�electricã?�productã?�rubberã?�acrylic productã?�middle densityã?�board etc nonmetal sheet precision cutting.Ï»¿ -
Product/Service Description: Introducing SLTL's Future X, the cutting-edge High Power 2D Fiber Laser Cutting Machine designed for unparalleled precision in sheet metal cutting. Packed with futuristic features, this model stands out with its instinctive reflexes and a robust gantry structure for 3G acceleration. The 15 kW fiber laser effortlessly cuts various metals, from mild steel to titanium. Here's why Future X is a game-changer: Dynamic Motorized Lens: Experience self-driven operation with automatic focus adjustment for different materials. Say goodbye to piercing delays, thanks to the alert auto-focusing function. Auto Sheet Orientation: Speed up your cutting process by eliminating manual sheet alignment. The auto-sheet orientation feature ensures efficient cutting without non-productive delays. Precise Section Cutting: Achieve precise cuts on thin to thick metal components, including coated and textured sheets. Future X's 15KW fiber laser provides complete control over cutting, even for complex profiles. Anti-Collision Mechanism: Designed with a powerful mechanical structure, Future X includes an anti-collision system. Enjoy uninterrupted material processing with features like snipping and parabolic leaping, minimizing non-productive times. Elevate your manufacturing unit's efficiency with Future X where innovation meets performance! Specification/Additional Details a. Model: Future X b. Laser Source: Fiber c. Laser Power: 6k, 8, 10, 12, 15 kW d. Power Consumption: 32, 40, 48, 56, 68 kW e. Working Area (X Y Z): 1550 x 3030 x 150mm (60 x 120 x 6) f. Maximum Speed (X Y Z): 220 m/min (4724 ipm) g. Position Accuracy: ±0.0050 mm (0.002) h. Repeatability: ±0.020 mm (0.001) i. Work Piece Weight: 900 kg j. Country of origin: Made in India
ROLLING MILL PLANT SPARE PARTS
Precision metal parts and assemblies on your inquiry. Any complexity. You are welcome to send us the list with the parts you need, and we'll calculate the prices for you. We use high quality materials from ferrous and non-ferrous metals and alloys that are certified according to the standards of the European Union.
Good scrap wires need good copper wire recycling machine to process, so do you need it small copper granulator machine BS-D75 is in running for our Nanjing client. After finish testing, this model BS-D75 wire granulator will be transport Small capacity, capacity is 50-80kg/h; Support single-phase electricity, fit for home use.
mini copper wire granulator machine BS-S05 very well. Compared with other machines, the BS-S05 small cable wire recycling machine's design has more than two years of development, and we test and run it many times only for the best machine performance, so you can always trust manufacturers.
BS-D10 small cable granulator is a kind of dry-type copper recycling machine, which is mainly for crushing and separating waste copper particles and plastic skins, so as to achieve the purpose of recycling scrap copper from used waste cable wires. BS-D10 small wires granulator machine has a small volume and a small output and capacity of processing wires is about 100kg per hour, very suitable for recyclers with few cables or households. Dry-type small cable granulator does not need to add water for drying and separation, and this copper recycling machine is simple to operate the entire process only requires one worker, which saves both manpower and cost. The dust collection system of the copper granulator machine can effectively collect dust while complying with environmental protection requirements, energy saving, and environmental protection, with zero pollution and zero emissions. Technical data of this wire granulator machine: Model: BS-D10 small cable granulator Processing dimension: Below 20mm Machine Capacity:100KG/H Machine weight: 1100KG Machine size: 2300*1600*2000MM Motor power: 20KW Motor voltage: 380V/220V/customized
Copper wire recycling machine BS-N130 granulates and separates copper and plastic from electric wires, processing capacity is about 600-800kg per hour. After the crushing and separating process, scrap cable wires can be recycled into clean copper rice with a 99.9% high copper separating rate, are you interested For different kinds of scrap wires, the wire recycling machines capacity is as follows: 1. For 4 6 square wire, capacity can reach 600-800KG/H 2. For 1.5 2.5 square wire, capacity can reach 500-700KG/H 3. For car wire and plug wire, copper content is 45-50%, and capacity can reach 400-60KG/H 4. For mixed wire, copper content 20-30%, capacity can reach 300-500KG/H. Technology data of copper wires separator recycling machine: Name: Copper cable wire separator recycling machine Model: BS-N130 Processing dimension: Below 50mm Machine Capacity: 600-800KG/H Machine weight: 5000KG Machine size: 1200*3500*2250MM Motor power: 67KW Motor voltage: 380V/customized
Brand DHATVIK Automation Grade Automatic We can manufacture and supply Mill stands for Rolling Mills / Wire rods / TMT / Light Section / Medium Section & Heavy Sections steel and of ferrous and non ferrous metals. These cost- effective conventional stands are available in both fibre bearing as well as anti-friction bearing. They can be opened or closed type. We also manufacture advanced pre-stressed mill stands that are known for their consistency in maintaining stock sizes. These stands provide significant advantage of both closed top, of rigidity and open top, of easiness in roll changing. Pre - stressed mill stand can be availed in 3 High as well as 2 High configurations based upon the requirement of the clients. The unique cassette design of the stand reduces the roll changeover to almost 10 to 15 minutes. We offer best solutions for mill stands to our clients with due regards to production, steel grades, easiness of maintenance and quality requirements.
MIW series mechanical ironworker processing capacity(kn):630 Material tensile strength (Mpa):
