Inco Nickel Plate Suppliers and Manufacturers

Compostable Sugarcane Bagasse 10 3-Compartment Plate,White, 500/Case Try something different with this compostable sugarcane bagasse dinnerware made from the fiber left over after sugar is extracted from the sugarcane plant. Compostable in a commercial facility within 30 - 90 days depending on the conditions of the compost pile. Most cost effective replacement for styrofoam, plastic or paper plates or bowls, cut- and grease-resistant, microwaveable and freezer safe. Featuring 3 distinct food compartments, this plate is perfect for buffets and picnics where there are multiple food selections. The larger compartment is just the right size to serve chicken, hamburgers, or a main entree, while the 2 smaller compartments are ideal for sides or desserts. With divided sections to keep food separated, you can control portions while creating a clean and organized presentation. Additional information Weight 24.25 lbs Dimensions 20.48 x 12.6 x 11.02 in Material Plant fiber Quantity 500/case Color White Diameter 10 Inches

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00

We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us

Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).

6 Round Compostable Fiber Plate 1000/Carton These 6" ripple edge plates are made from surplus sugarcane and wheat straw agricultural fiber. These two renewable and sustainable fiber materials are compostable and require no trees being cut down. This plate is ideal for use in buffets or large catered parties. Its durable, soak-proof design will stand up to grease and liquids for superior strength, allowing it to hold a variety of different foods, from burgers to pasta salad. Choose this eco-friendly plate to reduce your establishment's carbon footprint and provide convenient service.

Areca plates, also known as betel nut plates or palm leaf plates, are eco-friendly disposable plates made from the dried and fallen leaves of the Areca palm tree, native to India and other tropical regions. These plates come in various sizes, typically ranging from 4 inches to 12 inches in diameter, catering to different serving needs. In terms of quality, Areca plates are valued for their natural and biodegradable properties, making them an environmentally sustainable alternative to plastic or styrofoam plates. They are lightweight yet sturdy, suitable for serving both hot and cold food items. The texture of Areca plates varies depending on the manufacturing process and the specific leaves used, but they generally have a smooth surface suitable for serving food. These plates are popular for various occasions, including parties, weddings, picnics, and other events where disposable tableware is needed. They are appreciated not only for their eco-friendliness but also for their rustic and natural aesthetic, adding a touch of elegance to any dining setting. Overall, Areca plates offer a convenient, sustainable, and eco-friendly solution for disposable tableware needs. Size: 4 inches to 12 inches in diameter Country of Origin: India Grade Standard: Thickness, Texture, Finish, Eco-Friendly Packaging Type: Paper Box, Plastic Packet Shelf Life: 12 Months Packing: Customizable Certifications: SPICE BOARD / G.S.T. / I.E.C./ MSME MOQ: 1000 Nos. Binomial Name: Areca catechu Family : HS Code 4602.10.00 / 46021919, 46021990 Indian origin export-quality areca plates are eco-friendly disposable plates made from the dried leaves of the areca palm tree, scientifically known as Areca catechu. These plates are gaining popularity globally as a sustainable alternative to traditional disposable tableware due to their natural, biodegradable, and compostable properties.

With the upsurge of the usage of eco-friendly products, it is products like Areca Leaf Plates that are gaining more and more popularity. It is because people are understanding the need of the hour. We need to make sure that we look after the sustainability of our environment. We understand the importance of using products that are natural and organic. For the very same reason, we made sure that Areca leaf plates are 100% natural with no chemicals, wax, or dyes thereby increasing the safety levels. The production process of these disposable plates requires water for cleaning and heat/steam for shaping. These products can be used for serving any kind of dish.The Areca Leaf Plates are easy to handle when compared to usual plates. These plates are durable, mobile, and intuitive. All these reasons make the Areca leaf plates an attractive choice. They are lightweight and durable. Unlike paper or plastic plates, the Areca leaf plates do not distort the weight and temperature of the food. You can freely use these plates if you are planning to go on an outdoor picnic or organize an indoor gathering. The best part of these plates is that the shape stays intact at all times.

Natural Siali Leaf Plates