Glass Evacuated Solar Collector Tube Suppliers and Manufacturers

Solar collector The characteristic: 1 the vacuum tubes absorb the solar energy and transfer into the heat energy, then pass it to the u pipe, it can get high temperature. 2 there is no water in the vacuum tube, so the tube will not break in the winter. 3 it is steady and credible. 4 it can be combined with the architecture perfectly. 5 it can be combined with existing pipeline. 6 it can still operate in the event of occasional tube breakages. The details of material: Outer tank: alnico 1.5mm Manifold: 22mm thickness 2mm U copper type: 8mm thickness 0.6mm G.W. 50.6kg

Solar collector The characteristic: 1 The water is heated by the heat pipe rapidly. 2 There is no water in the vacuum tube,so the tube will not break in the winter. 3 It can be combined with the architecture perfectly. 4 It can be combined with existing pipeline. 5 It will be affected by the local water quality,it doesnf+t suit hard water. 6 It can still operate in the event of occasional tube breakages. The details of material Outer tank: Alnicof¼1.5mm Manifold:fT22mm thickness 2mm g.w. 77.1kg

The tubes are made from low emissivity borosilicate glass (glass with a very low iron content that has superior durability and heat resistance ) with an all-glass seal and they employ AL/N on AL selective coating, which enables the use of the whole solar energy spectrum to generate heat; this produces greater thermal efficiency in bright sunshine but also produces high efficiency in overcast or diffuse sunlight conditions. Further, the tubes are evacuated and have a barium getter (vacuum indicator) which changes color from silver to white if a tubes vacuum has been compromised. An examination of the tubes shows that the outside is actually 2 layers of glass and a vacuum has been created between them. A good way to demonstrate this would be to fill an empty tube with very hot water and notice that it does not even get warm as you hold the tube in your hands. That is because of the thermos effect¡± created by having a vacuum between the layers of glass. Carton with foam inside.

we provide X-ray tube accessories like glassbulb, target , rotor cathode and so on. offering mechanical parts processing work according to customer's drawing and requirements .

Material: borosilicate glass tube Shap: cone shape, H shape etc. Size: small, large, customer design Color: clear, amber, blue, black, green, pink, purple, yellow, etc. Application: flowmeter, household electrical appliance

1. Transparent quartz glass tube Smooth, colorless and transparent, high purity íí(sio2í¦99.99%), corrosion-resistant (expect hydrofluoric acid), high temperature-resistant (intenerating point 1730íµ), good thermal-stability, good light-penetrability (over 93% of visible light), crystal capability(6 hour under the temperature 1400í+5íµ,crystal thickness is less than 100 micron), good insulating-ability, long-life and non-contaminative. Mainly used in protection of heaters, production of halogen tube, lamps. 2. Desoxy transparent quartz tube Nice appearance, good thermal property and mechanical strength, strict tolerance and low hydro-(í_5ppm).Used in mercury lamp, metal halite and other quartz lamps. 3. Non-ozone transparent quartz tube It can prevent high-density ultraviolet radiation by being added titanium-oxide with colorless surface and light-purple section. It can almost prevent ultraviolet radiation no more than 220nm, while penetrates over 83% of 253.7nm, which have strong bactericidal ability. So ití»s called "bactericidal" and "non-ozone" quartz. It is widely used in bactericidal lamp, treatment of water and so on. 4. Uv-filtering transparent quartz tube It has colorless or light-blue surface and light-purple section. Besides common property, it can filter ultraviolet radiation of 190-320nm to prevent harm to bodies. It can be used in most kinds of environmental lighting products.

1. The milk-white (pearl-white) quartz glass tube can be manufactured into different shape as circle, pear, u and so on. 2. Normal quartz heating tube Never be eroded, good insulating ability, safely used, fast falling of temperature, save energy. Used in sterilizing dresser, microwave oven, drinking fountain and some other home appliances. 3. Far infrared halogen lamps: Our halogen lamps are all made by ourselves including tungsten filament- twisting and shell producing. The output is up to 3000-5000pcs/month. They are mainly used in room heating and industrial baking. The using life is over 5000 hours with good appearance and high quality. They can be manufactured into different shape as straight, round, circle, u and so on. All the products are made with fine tungsten filament as heating element, different quartz glass tube (transparent, uv, colored, milk-white) as shell, and filled halogen-tungsten gas to prolong the life.

Standard Size

1. Soda lime glass tube, lead glass tube, leads free glass tube for CFLs and EFLs. They have different length and O. D. 2. Competitively priced in China 3. High quality.

1) Available colors: dark blue, light blue, amber, light yellow, green, pink, purple, red and opaque blackú¼transparent black, gold champagne color new color. 2) Regularly stocked tubing size (diameter x wall thickness): Heavy wall tubing :( ten colors) 25 x 4mm, 32 x 3.2mm, 32 x 4mm, 38 x 3.2mm, 38 x 4mm, 44 x 4mm, 51 x 4mm, 51 x 4.8mm (standard length of tubingú¦1220mm) Light wall tubing :( amber, blue, green colors) 25x1.6mm, 30x2mm, 35x2mm, 40x2mm, 50x2mm, 55x2mm, 55x2.5mm, 60x2mm, 60x2.5mm, 70x2mm, 80x2mm, 85x2mm, 90x2mm, 100x2mm, 110x2.2mm, 120x2.5mm Inner profile tubing (amber, blue, green colors) 30x1.8mm, 35x1.8mm, 40x1.8mm, 45x1.8mm

Opaque quartz glass tube With the adoption of distinctive technique, our opaque quartz glass tube has its typical characteristics of good visual aspects and stable physical &chemical properties. It serves as material of infrared heating for heaters, micro-wave oven, electrical baking oven, car paint baking, steriliztion container and other consumptive and industrial infrared application. Further processing of trim cutting, bowing, firepolishing can be done according to the demanding of the customers. Carton

Translucent quartz glass tube They are clean and smooth, high purity (si02fª99.8%), stand cautery (expect hydrofluoric acid), stand high temperatrure (intenerate point 1650), good heat stablity, good transmition (even at infrared spectrum), insulated well, long life and without pollution. Mainly used in kinds of far infrared heating and drying facilities.

Key points High performance evacuated tube collectors Can be mounted free-standing or on a pitched roof, easy to install, simple roof fixings Heat pipe - offer low maintenance No water in the vacuum tubes, no freezing problem in winter, can be used in cold area. One broken tube will not affect the function of the system. 3 years warranty, 20+ years lifespan Market leading efficiency/output Triple layer selective absorber coating, absorption coefficient 94% Evacuated tube outer tube thickness 1.8mm 14mm high conductivity heat pipe condenser, Nick-coated condenser surface. Aluminum frame, strong structure, light weight. High and constant pressure of polyurethane foaming technology ensure the outstanding insulation quality. Principle: Evacuated tube solar collector use evacuated tubes to absorb solar energy then transfer energy to heat pipe via aluminum fin, when heat pipe is heated and working liquid vaporize and rise to top of heat pipe condenser (condenser is inserted into the mainfold port inside the solar collector manifold), when the heat pipe condenser meet cold water flow inside the manifold port, the working liquid will cool down and fluidify return to the bottom of heat pipe, so time and time again repeat this process, finally cold water(glycol) inside the manifold port be heated. Technical data: Model BSSC-10 BSSC-12 BSSC-15 BSSSC-18 BSSC-20 BSSC-24 BSSC-30 No. of collector pipes 10 12 15 18 20 24 30 Gross area(m2) 1.68 1.99 2.52 2.95 3.24 3.84 3.84 Absorber surface(m2) 0.87 1.04 1.30 1.46 1.62 2.08 1.94

The neutral borosilicate glass tube is our main products which have an outer diameter of 4 mm to 300 mm, which can meet the different requirements of pharmaceutical packaging, daily necessities, electronic products, military industry and solar thermal power generation. USP Type I water-resistant neutral borosilicate glass, acid and water-resistant for grade I, strong resistance to rapid cooling and heat, chemical stability, mechanical strength and impact resistance are better than other glasses. At the same time, the material can be directly sealed with Kovar alloy, which is the core component of solar high temperature collector tube and the key material in military industry. At present, the product quality of our company is stable, and the AI system has been realized in the productions line.

The neutral borosilicate glass tube is our main products which have an outer diameter of 4 mm to 300 mm, which can meet the different requirements of pharmaceutical packaging, daily necessities, electronic products, military industry and solar thermal power generation. USP Type I water-resistant neutral borosilicate glass, acid and water-resistant for grade I, strong resistance to rapid cooling and heat, chemical stability, mechanical strength and impact resistance are better than other glasses. At the same time, the material can be directly sealed with Kovar alloy, which is the core component of solar high temperature collector tube and the key material in military industry. At present, the product quality of our company is stable, and the AI system has been realized in the productions line.