Alloy And Crc Suppliers and Manufacturers

We are involved in trading of titanium alloys and all type of titanium contain material like,Rulite, Ilemenite sand, Titanium slag etc

Aluminum extrusion profile, plastic products factory, we are a manufacturer specializing in the production of supermarket hardware tools also make molds, plastic injection processing. extruded aluminum products is our conventional extrusion material including aluminium windows and aluminum doors, doors, door hinges, door locks, door hardware, extrusion processing of aluminum alloy profiles;and high precision processing of aluminum alloy extrusion products..Import and export

Calcium silicon Silicon barium Calcium silicon barium Calcium silicon aluminum Ferro silicon aluminum Calcium silicon aluminum barium These products are compound deoxidizer and desulfurizer, which can better meet the deoxidation and desulfurization operations of molten steel. It has low melting point, good deoxidation effect, promotes desulfurization, removes impurities, purifies molten steel, and improves steel properties.

SOFT MAGNETIC - IRON COBALT ALLOY Permendur 49 : (Composition (Nominal): Fe49; V2; Co49:) :(PERMENDUR 49 exhibit the highest magnetic saturation (2.4 T) of all soft-magnetic alloys. high D.C. maximum permeability, low D.C. coercive force, and low A.C. core loss. : (Specifications: ASTM A801 Alloy Type 1 ; ( Please request a QUOTE for material Datasheet ?

NICKEL IRON SEALING ALLOY 52 ; (Composition (Nominal): Ni 50 , Fe Balance . ;( Alloy 52 is a 50% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. The alloy's rate of thermal expansion is virtually constant to a temperature of about 1050 °F (565 °C). ;(Specification : ASTM F30 ; ;(Product availability and request a QUOTE!

We are manufacturer of beryllium metal, beryllium oxide, beryllium fluoride, aluminum beryllium master alloy, beryllium copper master alloy, beryllium copper alloy(C17000, 17200, 17300, 17410, C17500, C17510, JK520, JK38, etc).

DL Industry Group Limited is famous supplier, exporter and manufacturer of beryllium relevant products since 2018 Main producs: 1. Beryllium metal Beryllium metal can be used to make beryllium powder, beryllium rods, beryllium foil, etc., and can be used in nuclear reactors, nuclear reactor devices, space telescopes, and medical detection beryllium windows. 2. Beryllium oxide CAS: 1304-56-9. Molecular formula: BeO Beryllium oxide is mainly used in the manufacture of special ceramics, and glass. It can also be used as nuclear reactor fuel and moderator, and as an organic reaction catalyst. 3. Beryllium Copper Master Alloy Other Name: Copper Beryllium Mater Alloy, Beryllium Copper Ingot By adding beryllium copper master alloy during the casting process of beryllium copper alloy, beryllium copper alloy products with high strength, high conductivity and high elasticity can be obtained. Main production: CuBe3.3, CuBe4(Beryllium Copper Master Alloy Be:3.8-4.3) and CuBe10(Beryllium Copper Master Alloy Be>9.8). 4. Beryllium Copper Alloy Trademark: C17100, C17200, C17300, C17500, Jk520, JK38, etc 5. Beryllium Aluminum Master Alloy Main production: AlBe3, AlBe5 Beryllium Aluminum Master Alloy AlBe3 is mainly used for producing magnesium aluminum alloy or named magnalium alloy Beryllium Aluminum Master Alloy AlBe5 is mainly used of producing the aluminium silicon alloy

Product Specification Name Poly horse halter Material 1 Poly webbings Fittings Zinc alloy fittings Plating Brass plated, Nickle plated Color Solid colors, Combination colors Size Small,Average,Large,X-large Advantages Low price, high quality, Comfortable MOQ 50pcs Delivery time 30days

Product Specification Name Poly horse halter Material 1 Poly webbings Fittings Zinc alloy fittings Plating Brass plated, Nickle plated Color Solid colors, Combination colors Size Small,Average,Large,X-large Advantages Low price, high quality, Comfortable MOQ 50pcs Delivery time 30days

T Type Titanium Alloy Connecting Rod Bearing Fittings Model SRC-001 Material Tianium Alloy Application Medical,Motorcycle,Bio-Tech Test Equipment,Sports,Home Appliance,Construction,Agriculture ,Aerospace,Petroleum,gas metallurgy Process CNC Turning,Milling,Grinding,Drilling,CNC Lathe machine,CNC Center machine Surface Finished Polishing

Advantages of Aluminum Titanium Carbon (Al-Ti-C ) (AlTi5C0.20, AlTi3C0.15) 1. Nucleation rate of Titanium Carbon Aluminum Grain Refiners is Five Times as quick as Aluminum Titanium Boron. The desired modification effect will be seen in three minutes after Al-Ti-C is added. Refining effect of aluminum is very significant and the refining time could keep 45-60 minutes. 2. Effectively reduce the pinholes of aluminum foil as sizes of heterogeneous grain Tic is sub-micron, widely dispersed and disaggregated, so it's perfect for the process of aluminum foil. 3. Titanium Carbon Aluminum master alloys is much purer than Al-Ti-B, as potassium fluoridate isn't added during the production of AlTiC Grain Refiner 4. Reduce the inclusion content and eliminate the oxide layer and defects on the surface because of no TiB2 agglomeration in Al-Ti-C master alloys. 5. Al-Ti-C alloy can bring A356 Aluminum alloy wheels better mechanical property and higher elongation rate when used as grain refiner than the best Aluminum Titanium Boron. 6. Al-Ti-C alloys have more advantages for the casting production of aluminum alloy for nuclear industry which cannot include boron. Shape and Packages Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet Small Ingot: 25KGS/carton, 1000KGS/pallet Cast cut bar: According to the length of the bar Customer-made products for accurate and easy use could also be supplied.

Fengyue Aluminum Titanium Boron will provide the following advantages to Aluminum Alloy: 1.Improve the strength and toughness of aluminum alloy. 2.Eliminate columnar grains and feathery grains. 3. Improve the intrinsic quality of aluminum products by reducing the internal shrinkage cavities, porosity, hot cracking and segregation. 4. Increase more flexibility during the plastic deformation of the subsequent processing in the casting by improving its ductility 5. Reduce surface defects of aluminum product by improving its ductility. 6. Improve calendering rate and productivity on the premise of ensuring the quality of products. 7. Increase the using time of the calendering molds and auxiliary equipments on the premise of ensuring the quality of products. 8.Make the surface of aluminum more beautiful by improving the surface treatment of aluminum products Chemical Composition AlTi5B1: Ti:4.5-5.5% B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max AlTi3B1: Ti:2.5-3.5 B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max AlTi5B0.2: Ti:4.5-5.5% B:0.15-0.25% Fe:0.3%Max Si:0.2%Max V:0.1%Max AlTi5B0.6 Ti:4.5-5.5% B:0.55-0.65% Fe:0.3%Max Si:0.2%Max V:0.1%Max Shape and Packages Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet Small Ingot: 25KGS/carton, 1000KGS/pallet Cast cut bar: According to the length of the bar Customer-made products for accurate and easy use could also be supplied.

Advantages of Aluminum Titanium Carbon(Al-Ti-C ) - AlTi5C0.20 1. Nucleation rate of Titanium Carbon Aluminum Grain Refiners is Five Times as quick as Aluminum Titanium Boron. The desired modification effect will be seen in three minutes after Al-Ti-C is added. Refining effect of aluminum is very significant and the refining time could keep 45-60 minutes. 2. Effectively reduce the pinholes of aluminum foil as sizes of heterogeneous grain Tic is sub-micron, widely dispersed and disaggregated, so it's perfect for the process of aluminum foil. 3. Titanium Carbon Aluminum master alloys is much purer than Al-Ti-B, as potassium fluoridate isn't added during the production of AlTiC Grain Refiner 4. Reduce the inclusion content and eliminate the oxide layer and defects on the surface because of no TiB2 agglomeration in Al-Ti-C master alloys. 5. Al-Ti-C alloy can bring A356 Aluminum alloy wheels better mechanical property and higher elongation rate when used as grain refiner than the best Aluminum Titanium Boron. 6. Al-Ti-C alloys have more advantages for the casting production of aluminum alloy for nuclear industry which cannot include boron. Shape and Packages Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet Small Ingot: 25KGS/carton, 1000KGS/pallet Cast cut bar: According to the length of the bar Customer-made products for accurate and easy use could also be supplied.

Made from Aluminum Scrap, with Alu content 96% min, with dross Size: Diameter: 13 ± 0.4 mm; Length: 12 mm (9 ~ 16 mm> 90%) Volume: ~ 5g Packing: Bag Packing or Bulk Made in Vietnam, full of shipping document and cert of origin

Made from Aluminum Scrap. with Alu content 95% min, with dross Bottom diameter: 35 - 45 mm; Height 30 to 40 mm. Volume: 80 to 120 g Packing: Bag Packing or Bulk Made in Vietnam with full shipping document and Cert of Origin

Ferrosilicon alloy is a deoxidizer used in steelmaking production. It improves the shape of inclusions and reduces the content of gas elements in molten steel. It is an effective new technology to improve steel quality, reduce costs, and save aluminum. It is especially suitable for the deoxidation requirements of continuous casting molten steel. Practice has proved that it not only meets the deoxidation requirements of steelmaking, but also has desulfurization performance and has the advantages of large specific gravity and strong penetrating power. The production of silicon-aluminum ferroalloy can be divided into the following three stages 1. Generation of silicon carbide At lower temperatures, SiO2 reacts with carbon to produce silicon carbide, 2. Generation of aluminum oxide carbides and carbides In the temperature range of 1600~2000�ºC, carbon reacts with aluminum oxide to form aluminum oxide and silicon carbide; 3. Intermediate compounds such as carbides decompose silicon-aluminum-iron to form. At a higher temperature, aluminum oxide, silicon carbide, aluminum carbide and silicon dioxide react to obtain silicon-aluminum; only high-quality silicon-aluminum ferroalloy can produce high-quality silicon-aluminum iron blocks. When purchasing silicon-aluminum iron balls, you need to pay attention to Its quality, the quality of silicon aluminum iron ball has a direct impact on its application.

6061 aluminium is an American alloy and one of most versatile of the heat-treatable alloys. The alloy is typically used in heavy duty structures. It is a medium to high strength heat-treatable material with very good corrosion resistance and medium fatigue strength. 6061 in the annealed condition offers excellent weldability and formability and is readily disposed to furnace brazing.

6063 aluminium alloy is often referred to as an High architectural alloy and is used in the production of intricate extrusions. With an aesthetically pleasing finish and high corrosion resistance the alloy is readily suited to welding and can be easily anodised. 6063 aluminium is most commonly supplied as T6 temper. If supplied in the T4 condition the alloy has good formability.

REFINED METALS ALUMINIUM Being the 13 element in the periodic table, aluminium is a silvery-white, soft, non-magnetic and ductile +metal. Most widespread metal on Earth, it makes up more than 8% of the Earths core mass. Also, after oxygen and silicon, its the third most common chemical element. Aluminium has 3 main qualities, i.e. light, durable and functional, which make it one of the key engineering materials of our time. We can find aluminium almost everywhere in our lives like in our homes, in the automobiles, trains and aeroplanes, in the mobile phones and computers and in modern interior designs.