1inch 23G Safety Needle +1 ml luer lock Disposable Syringe -1,325,000 units 1inch 25G Safety Needle +1 ml luer lock Disposable Syringe-1,325,000 1.5inch 23G Safety Needle +1 ml luer lock Disposable Syringe-1,325,000 1.5inch 25G Safety Needle +1 ml luer lock Disposable Syringe-1,325,000
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
Desiccated coconut, sometimes referred to as Coconut Powder, is a dehydrated form of white coconut meat from freshly selected mature coconut kernels. It is prepared from substantially sound white kernel obtained from the whole nut of coconut (Cocos nucifera). Desiccated coconuts have to be processed in an appropriate manner, undergoing operations such as de-husking (the removal of the husk, leaving the shell intact), hatcheting (the removal of the shell), paring (the removal of the brown skin around the kernel), washing, comminuting, drying (to humidity level below 3%) and sifting. They can be produced without oil extraction or with partial oil extraction by appropriate physical means. Preservatives are allowed for use in production of desiccated coconuts and the most common in practice is sulphur dioxide. Also citric acid is allowed for use as the antioxidant. Table 1: Combined Nomenclature code for desiccated coconuts Number Product 080111 Coconuts, desiccated Product Specification Quality For detailed standard quality requirements please refer to Codex Alimentarius Standard for Desiccated Coconut The basic quality requirements for desiccated coconuts are: Colour: natural white to light creamy Texture: free-flowing and free from yellow specks Flavour: distinctive coconut flavour without off-flavours due to deterioration or absorption of extraneous substances. Odour: The odour shall be characteristic of the product, shall not be mouldy, cheesy, smoky, fermented or rancid, and shall not possess any undesirable odour. Oil content: According to the oil content, desiccated coconuts are in trade practice commonly divided into 2 categories: 1. High fat Desiccated Coconut (sometimes referred as 'full fat') with equal or more than 60% m/m of oil. It is dehydrated form of white coconut meat from freshly selected mature kernels. 2. Low fat Desiccated Coconut with less than 60% m/m of oil. It is a dehydrated form of white coconut meat after extraction of the Coconut milk. The fat content of this product can vary but is usually in the range of 45% - 55%. Additional quality requirements
Desiccated coconut, sometimes referred to as Coconut Powder, is a dehydrated form of white coconut meat from freshly selected mature coconut kernels. It is prepared from substantially sound white kernel obtained from the whole nut of coconut (Cocos nucifera). Desiccated coconuts have to be processed in an appropriate manner, undergoing operations such as de-husking (the removal of the husk, leaving the shell intact), hatcheting (the removal of the shell), paring (the removal of the brown skin around the kernel), washing, comminuting, drying (to humidity level below 3%) and sifting. They can be produced without oil extraction or with partial oil extraction by appropriate physical means. Preservatives are allowed for use in production of desiccated coconuts and the most common in practice is sulphur dioxide. Also citric acid is allowed for use as the antioxidant. Table 1: Combined Nomenclature code for desiccated coconuts Number Product 080111 Coconuts, desiccated Product Specification Quality For detailed standard quality requirements please refer to Codex Alimentarius Standard for Desiccated Coconut The basic quality requirements for desiccated coconuts are: Colour: natural white to light creamy Texture: free-flowing and free from yellow specks Flavour: distinctive coconut flavour without off-flavours due to deterioration or absorption of extraneous substances. Odour: The odour shall be characteristic of the product, shall not be mouldy, cheesy, smoky, fermented or rancid, and shall not possess any undesirable odour. Oil content: According to the oil content, desiccated coconuts are in trade practice commonly divided into 2 categories: 1. High fat Desiccated Coconut (sometimes referred as 'full fat') with equal or more than 60% m/m of oil. It is dehydrated form of white coconut meat from freshly selected mature kernels. 2. Low fat Desiccated Coconut with less than 60% m/m of oil. It is a dehydrated form of white coconut meat after extraction of the Coconut milk. The fat content of this product can vary but is usually in the range of 45% - 55%. Additional quality requirements
Desiccated coconut, sometimes referred to as Coconut Powder, is a dehydrated form of white coconut meat from freshly selected mature coconut kernels. It is prepared from substantially sound white kernel obtained from the whole nut of coconut (Cocos nucifera). Desiccated coconuts have to be processed in an appropriate manner, undergoing operations such as de-husking (the removal of the husk, leaving the shell intact), hatcheting (the removal of the shell), paring (the removal of the brown skin around the kernel), washing, comminuting, drying (to humidity level below 3%) and sifting. They can be produced without oil extraction or with partial oil extraction by appropriate physical means. Preservatives are allowed for use in production of desiccated coconuts and the most common in practice is sulphur dioxide. Also citric acid is allowed for use as the antioxidant. Table 1: Combined Nomenclature code for desiccated coconuts Number Product 080111 Coconuts, desiccated Product Specification Quality For detailed standard quality requirements please refer to Codex Alimentarius Standard for Desiccated Coconut The basic quality requirements for desiccated coconuts are: Colour: natural white to light creamy Texture: free-flowing and free from yellow specks Flavour: distinctive coconut flavour without off-flavours due to deterioration or absorption of extraneous substances. Odour: The odour shall be characteristic of the product, shall not be mouldy, cheesy, smoky, fermented or rancid, and shall not possess any undesirable odour. Oil content: According to the oil content, desiccated coconuts are in trade practice commonly divided into 2 categories: 1. High fat Desiccated Coconut (sometimes referred as 'full fat') with equal or more than 60% m/m of oil. It is dehydrated form of white coconut meat from freshly selected mature kernels. 2. Low fat Desiccated Coconut with less than 60% m/m of oil. It is a dehydrated form of white coconut meat after extraction of the Coconut milk. The fat content of this product can vary but is usually in the range of 45% - 55%. Additional quality requirements
Syringe with Hypodermic Needle PrecisionGlide 3 mL 23 Gauge 1 Inch Thin Wall NonSafety UOM: 800/CS Product Number: 309571 Manufacturer: BD
Syringe with Hypodermic Needle PrecisionGlide 3 mL 22 Gauge 1-1/2 Inch Regular Wall NonSafety UOM: 800/CS Product Number: 309574 Manufacturer: BD
Bambusa Arundinacea (Vanshlochan) - 70% Natural silica Natural strengthening properties of vanshlochan lowers the risk of osteoporosis and speed up the healing of fractures. Additionally, it acts as a remineralizing agent, thereby managing chronic inflammation, osteoarthritis, rheumatoid arthritis, painful joints, and low bone density.
Berberis Aristata Extract -2% to 97% by HPLC Berberis aristata is used in Ayurveda to treat eye disorders, skin disorders with itching, diabetes, urinary tract diseases, etc. It is the main source for berberine, an alkaloid that is showing huge potential in treating diabetes and high cholesterol levels.
Aloe Vera Extract 200 X polysaccharides. It contains healthful plant compounds. It has antioxidant and antibacterial properties. It accelerates wound healing. It reduces dental plaque. It helps treat canker sores. It reduces constipation. It may improve skin and prevent wrinkles. It lowers blood sugar levels.