Crane rail clip is a welded and adjustable crane rail clip assembly which is designed to fix to heavy rails in the most arduous applications. Its material is forged Q235 or Q345 steel. Each clip has one sets of M16 high strength bolts (8.8 grade). It is designed to withstand a 120 KN (12.2 tonnes) horizontal force from the rail, and the horizontal adjustment is 20 mm. Place of Origin Hubei, China Type Weldable Crane Rail Clip Material Stainless Steel Brand Name Linkage Type: welded Keyword: Crane Rail Clip Usage: Fastening Railway Weight 0.8KGS OEM/ODM: Customization Service Provided Brand name Linkage Material Q235 or Q345 steel
Inward tilting of rails by 1 in 20. The wheel-set was first assembled by mounting the wheels symmetrically on to the axle at a clear spacing of 1600 mm, in accordance with the specifications. The wheel-set was further mounted on to the rails, aligning the wheels to travel in the forward direction of the rails, as shown in figure 2. The movement of wheels were allowed only in the longitudinal direction of rails, and the movements in the lateral and vertical directions were constricted. The implementation of high speed railways in India are in their early phases and vast studies are being conducted for the effective implementation of the system. Maintaining the traction required for efficient operation of trains at high speeds requires the net minimum frictional coefficient to be maintained at the wheel-rail interface.
LJ-LDG1901 Electric Rail Drilling Machine 36V Intelligent lithium battery rail drilling machine *Fully waterproof design, support rainy day work *Clean energy, green and pollution-free *Intelligent control system, keeps drilling at a constant speed, and displays the number of holes with remaining power *Super endurance capability : Drilling more than 40 holes each charge (31 mm diameter hole) Drilling more than 110 holes each charge (13.5 mm diameter hole) Drilling more than 180 holes each charge (9.8 mm diameter hole) *Ultra-light weight, only 15.9 kg including battery *Overload reminder and protection design *Quick-change design of the drill bit, do not need any additional tools
The device holds in position the rails during the welding operation and is adaptable to all rail types: vignole, crane rails and grooved rails. Specification Type Shoulders Material Alloy Steel Dimensions (L x W x H) (mm) 600*540*170mm Place of Origin LN, China Span 460mm Max. lifting force 15KN
Brake Shoes braking is to place iron brake shoes on one or two rails, and the train rolling wheel slides along the rail after pressing the brake shoes. The rolling friction between the wheel and rail changes into sliding friction to prevent the wheel from moving forward and play the role of braking.
The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation. Specification Model YD-22 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1300 * 750 * 1600mm Engine Diesel Engine SF190 Power 7kW Vibrating force 22kN Vibrating frequency 66.7Hz Hydraulic system working pressure 5~6MPa Max insert force 16kN Max clamping force 6.5kN * 2 Production efficiency â?¥ 270 pieces / (group â?¢ hour) Inserting depth 110mm ± 10mm (underneath the sleeper) Weight 439kg
NQG5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc.
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
NQG 5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc.
NQG5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc.
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency. Specification Model NLB-300 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1300*510*760mm Main shaft rpm 780r/min Max. loosen torque 300 Nâ?¢m Max. fasten torque 150 Nâ?¢m Working efficiency 10 pieces/min Petrol engine 1) Model: GX160 (2) Rated power: 4Kw (3) RPM: 3600r/min Weight 60kg
Rail Clamp The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair. The Rail Clamp has been engineered to eliminate many of the disadvantages of other traditional rail clamp designs and provides enhanced performance under all conditions of use. The Rail Clamp design is radically different to the legacy design and guarantees a positive pre-torque angle so as the bolt is tightened the bolt holes remain aligned, eliminating the risk of bent bolts. We test have proved that bolts remain straight even at twice the recommended torque. · Allows suction jars to be attached to stand rail · One rail clamp holds one canister · Rail can hold up to four rail clamps and canisters Specification Model LJ-JJQ-C Type Rail Clamps Material Stainless Steel Dimensions (L x W x H) 335mm*175mm*42mm Application Rail Type 43,50,60kg
The Battery powered rail cutting machine has passed the strict verification of protection grade, and supports the work in rainy and snowy weather; Professional lithium battery platform for ultra long endurance operation; The equipment can be used normally under extreme conditions such as high cold and high altitude; The lithium battery has passed the safety test conducted by the national authority. Specification Voltage 72V Power 5KW Cutting time
Rail Clamp The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair. The Rail Clamp has been engineered to eliminate many of the disadvantages of other traditional rail clamp designs and provides enhanced performance under all conditions of use. The Rail Clamp design is radically different to the legacy design and guarantees a positive pre-torque angle so as the bolt is tightened the bolt holes remain aligned, eliminating the risk of bent bolts. We test have proved that bolts remain straight even at twice the recommended torque. · Allows suction jars to be attached to stand rail · One rail clamp holds one canister · Rail can hold up to four rail clamps and canisters Specification Model LJ-JJQ-C Type Rail Clamps Material Stainless Steel Dimensions (L x W x H) 335mm*175mm*42mm Application Rail Type 43,50,60kg
Place of Origin Hubei, China Type L Square Ruler Material Stainless Steel Dimensions (L x W x H) (mm) 300*130mm Brand Name Linkage Model LJ-ZJC Scale 1mm Length 300 mm
Rail turner Rail turn bar Turnover device consists of: cast rail turner head, high-quality carbon structural steel rod tip and seamless steel pipe welded together, utility model turn rail device, turning rail rail with a manual clamp tool. Easy to use, labor-saving, high efficiency, low labor intensity, easy to carry the railway staff, the railway sector is a dedicated tool for standing. Place of Origin Hubei, China Type railway tools Material Aluminum alloy Dimensions (L x W x H) (mm) 1800*30*120mm Brand Name Linkage Type: Rail turn bar length 1500mm Applicable rail type: 43/50/60 rail Color: customized Approved: ISO Certificate CE Warranty: 1 year Standard: CRCC Customized: yes
Railway Signal Light It can be widely used in railroad , shipping and other traffic and transportation industries and some special industries as signal indication, safety warning and working lighting. Model MSL4730 Type Railway Signal Light Material Plastic Dimensions (L x W x H) 66*170mm Rated Voltage DC3.7V Rated capacity 3.8Ah/3800mAh Lift circle 100000h Battery burn time-signal 12h Battery burn time-lighting 10h Bttery life circle 1000 Charging time 10h Weight 0.25kg Shell protection grade IP65
Rail Gap Gauge Rail Gap Gauge is used for measuring the distance between two adjoining rails Benefits: Joint Gap Measuring Device shape: similar to carrot, tapered. This product is made of stainless steel , long service life. Easy to operate and easy to carry. Place of Origin Hubei, China Type railway tools Material Stainless Steel Brand Name Linkage Type: Rail Gap Gauge Product name: Railway Joint Gap Measuring Device Application Railway Joint Gap Usage: For Railway Track Joint Clearance measurment Color: Silver Approved: ISO Certificate CE Warranty: 1 year Standard: CRCC Customized: yes
Rail Clamp The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair. Place of Origin Hubei, China Type Rail Clamp Material Stainless Steel Dimensions (L x W x H) (mm) 60X60X60 cm Brand Name Linkage Model LJ-JJQT Weight 6.5kg
CTS -1002 Handy Ultrasonic Flaw Detector The CTS -1002 is a light-weightinstrument with excellenterformance which accumulates theexperiences of 50 years for makingultrasonic instruments . Thisinstrument is EN12668-1 : 2010compliance and has anindustrial-leveled TFT display with full WVGA ( 800X480 resolution providing superior visibility in alllighting conditions including direct sunshine. Place of Origin Hubei, China Type Ultrasonic Flaw Detector Dimensions (L x W x H) (mm) 215mm*126mm*53mm Brand Name Linkage Packaging and delivery Packaging Details Carton box Selling Units: Single item Single package size: 28X20X15 cm Single gross weight: 3.000 kg